cec: fix simplink reconnect via the TV source selector (after vendor command 0x03)
[deb_libcec.git] / debian / changelog
CommitLineData
94d98b71
LOK
1libcec (1.2-1) unstable; urgency=low
2
3 * bugfixes:
4 * pass the deck_control command to libcec listeners
5 * check whether the initiator is valid in CCECProcessor::ParseCommand().
6 fixes possible segfault when parsing invalid data
7
8 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 12 Nov 2011 13:36:00 +0100
9
c3da3073
LOK
10libcec (1.1-3) unstable; urgency=low
11
12 * fixed return value in CCECProcessor::SetStreamPath(), which prevented
13 active source and menu state from being sent
14
15 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 23:36:00 +0100
16
f0197d4f
LOK
17libcec (1.1-2) unstable; urgency=low
18
19 * forgot to update the headers to v1.1
20
21 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 18:56:00 +0100
22
4f8dcef2
LOK
23libcec (1.1-1) unstable; urgency=low
24
25 * interface changes:
26 * added logical address autodetection and let libcec handle multiple types
27 simultaniously. for logical address autodetection, you have to use
28 CECInit()/cec_init_typed() instead of CECCreate()/cec_init()
29 * added SetActiveSource()/cec_set_active_source() to the interface.
30 deprecated SetActiveView()/cec_set_active_view()
31 * added SetMenuState()
32 * added PollDevice()/cec_poll_device()
33 * removed duplicate method SetActiveSource() / SetActiveView()
34 * added SetDeckControlMode() and SetDeckInfo()
35 * fixed:
36 * added vendor detection for panasonic and broadcast active view and set
37 menu state when a panasonic device sets the stream path. thanks for the
38 pointer cptcoconut.
39 * added vendor code for pioneer
40 * osd string is 13 chars max. don't send more
41 * send the correct cec version for each device
42 * switch to panasonic specific cec implementation if a panasonic device was
43 detected
44 * send the correct device type in TransmitPhysicalAddress()
45 * send a reply from the correct device when the stream path is requested
46 * opcode 0x80 means the stream path changed, not the physical address
47 * don't poll for a vendor ID in monitoring mode
48 * fixed parameter parsing in SetVendorId()
49 * buffer up commands that are received while waiting for an ack. only send
50 'active source' message for the actual active source
51 * win32: prepend the com port path with '\\.\', so com ports > 9 can be
52 accessed. thanks smolesen
53 * audio systems cannot be an active source, so don't transmit active
54 source message from this device
55 * only send 'active source' when powered on
56 * only set the osd name for the primary device. use default values for
57 others
58 * increase physical address with 0x100 per device
59 * win32: removed unneeded afxres.h include in the resource files, which
60 is not present when using studio express. thanks Ghuron
61 * fixed C headers
62 * mark the active source as active and other devices as inactive
63 * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER
c6b7b98b 64 * transmit the menu state as (active) when the stream path is set
4f8dcef2
LOK
65 * changed:
66 * changed copyright of boblight files with permission of the original
67 author
68 * partial handling of audio related opcodes
69 * more consistent log messages
70 * set a device type and name for each CCECBusDevice
71 * keep a power and menu state per device
72 * renamed all Broadcast...() and Report...() methods to Transmit...()
73 * renamed SetOSDString() to TransmitOSDString()
74 * changed debug level of 'did not receive ack' from error to debug
75 * only set the power status to 'on' for the primary device
76 * moved method decriptions from cecc.h to cec.h
77 * only send a power on command when a device isn't on already and set
78 the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while
79 powering on
80 * handle CEC_OPCODE_STANDBY
81 * handle CEC_OPCODE_ACTIVE_SOURCE
82 * always start in standby mode and let the tv (or other device) send the
83 power on command
84 * renamed the last few enums
85 * handle deck related opcodes.
86 * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown'
87
88 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 17:42:00 +0100
89
84c27c41 90libcec (1.0-1) unstable; urgency=low
5984d274
LOK
91
92 * interface changes:
93 * set lib interface version back to 1.0 and rename GetLibVersion() to
94 GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion()
95 * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor
96 version number to 1
97 * fixed:
98 * samsung's vendor specific remote keypresses don't send key releases. added
99 call to AddKey() directly after the keypress
100 * always reset the button press time in CLibCEC::AddKey()
101 * always wait for a signal in CCECProcessor::Transmit()
102 * changed:
103 * drop shared_ptr and use a normal pointer. removed boost dependency
104
105 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 04 Nov 2011 00:14:00 +0100
106
b3efc8f2
LOK
107libcec (0.8-2) unstable; urgency=low
108
109 * added 'libboost-dev' to build deps
110
111 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 23:31:00 +0100
112
971d0e9e
LOK
113libcec (0.8-1) unstable; urgency=low
114
115 * interface changes:
116 * added GetDevicePowerStatus()/cec_get_device_power_status()
117 * added GetDeviceVendorId()/cec_get_device_vendor_id()
118 * added GetDeviceMenuLanguage()/cec_get_device_menu_language()
119 * added GetDeviceCecVersion()/cec_get_device_cec_version()
120 * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when
b3efc8f2
LOK
121 monitoring is enabled, the device will only log the data it received,
122 but will not respond to any message
971d0e9e 123 * removed timeout parameter in Transmit() and included the ack timeout in
b3efc8f2 124 the cec_command struct
971d0e9e
LOK
125 * made the vendor id -> vendor name translation available
126 * made CEC_LOG levels powers of 2
127 * introduced CEC_LOG_TRAFFIC log level
128 * fixed:
129 * set the correct ackmask on startup
130 * wait for ack while keeping a lock
131 * wait for the processor thread to start before continueing on startup
132 * wait for messages to be transmitted before continueing in
b3efc8f2 133 CCECProcessor::Transmit()
971d0e9e
LOK
134 * only set the logical address once when it has changed
135 * correct source for broadcast messages
136 * win32: create Release type installer
137 * changed:
138 * make all reads and write in CAdapterCommunication go through buffers.
139 * poll for a vendor ID of connected devices and switch to a non-standard
b3efc8f2 140 CEC implementation if needed.
971d0e9e
LOK
141 * added vendor detection of Samsung and LG devices
142 * handle samsung remote command 'return'
143 * cec-client:
144 * added -la and --logical-address to the command line params
145 * added -d and --log-level params to cec-client
146 * added -sf and --short-log-file, which only log the actual messages, not
b3efc8f2 147 the level and timestamp
971d0e9e
LOK
148 * added -f and --log-file parameters to cec-client
149 * added option to change the log level to cec-client
150
b3efc8f2 151 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 22:58:00 +0100
971d0e9e 152
8f084f00
LOK
153libcec (0.7-1) unstable; urgency=low
154
155 * send a keypress with 0 duration when a key is pressed and with a duration
156 set when it's released
157 * added SetOSDString() to the interface (not supported by all tvs)
158 * fixed: 'routing change' is a broadcast message. log routing changes, but
159 don't send a 'set active view' message, so the active input won't be
160 changed
161 * log keypresses in the debug log
162 * added 'pa' command to cec-client, to change the physical address
163 * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so
164 the HDMI port number to use can be changed
165 * fixed: put the message processing code from WaitForAck() in ParseMessage().
166 fixes missing incoming message logging of non-data messages when not
167 waiting for an ACK
168 * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK
169 before returning
170 * fixed: set initiator and destination first in cec_command::push_back().
171 fixes 'tx' command in cec-client
172 * fixed: keep trying to connect while iTimeout isn't reached (default 10
173 seconds). fixes exit with a 'permission denied' error when the device isn't
174 ready yet. remove CEC_SETTLE_DOWN_TIME
175 * fixed: don't call SetActiveView() when reporting the power status. fixes
176 loop which causes some TVs to report failed connections
177 * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed.
178 * fixed: add the device type as parameter when sending the physical address.
179 thanks bobo1on1
180 * fixed: typo in libcec.pc.in
181 * added optional strLib parameter to LoadLibCec(), so the location of the
182 shared library can be specified
183 * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB
184 * use int instead of bool on the public C interface and remove stdbool.h include
185 * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h =>
186 cecloader.h, CECTypes.h => cectypes.h
187 * updated debian package. split up libcec and libcec-dev
188 * fixed: changed to use dlopen instead of static linkage. shuffled headers a
189 bit. bumped interface to version 7
190 * removed 'rt' from libraries. it's not needed (anymore)
191 * fixed: reset the active view after a routing change. issue #1
192 * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an
193 error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear
194 * added contributors link
195
196 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 14 Oct 2011 17:34:00 +0200
197
11d0a2d6
LOK
198libcec (0.6-1) unstable; urgency=low
199
200 * bumped interface version to 6
201 * fixed packet output (reporting the OSD name correctly now)
202 * refactored packet structs: split up in cec commands and adapter messages
203 * fixed i/o timings
204 * added Darwin support (thanks Davilla!)
205 * fixed WaitForAck()
206 * fixed possible deadlock when starting a new thread
207 * implemented vendor id and device class parsing. full detection will follow
208 * added "on" and "standby" commands to the test client
209 * retransmit packets if needed
210 * fix GetTimeMs() on linux
211 * added timestamp to log messages
212
213 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 09 Oct 2011 15:15:00 +0200
214
9519c249 215libcec (0.5-1) unstable; urgency=low
25701fa6
LOK
216
217 * bumped interface version to 5
218 * don't pass std::string and std::vector accross the interface
219 * fixed heap corruption crashes on windows
220 * fixed some memory leaks
221 * reset all structs to default values before doing with them
222
11d0a2d6 223 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 07 Oct 2011 22:00:00 +0200
25701fa6 224
262f3b05
LOK
225libcec (0.4-3) unstable; urgency=low
226
227 * fixed reconnect
228 * fixed some threading related bugs
229 * fixed deadlock on exit
230 * fixed wrongly reported physical address
231
232 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 06 Oct 2011 00:19:00 +0200
233
4463fb80
LOK
234libcec (0.4-2) unstable; urgency=low
235
236 * fixed int parameter sizes and some signed/unsigned warnings
237 * check whether m_port isn't NULL in ReadFromDevice
238 * stop the processor thread and delete the CSerialPort instance on exit
239 * added mutex in CSerialPort
240 * fix segfault on exit
241 * renamed libPlatform -> platform.
242 * stuck everything from libCEC in the CEC namespace to avoid namespace
243 polution
244
245 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 23:45:00 +0200
246
88c5a743
LOK
247libcec (0.4-1) unstable; urgency=low
248
249 * bumped interface version to 4
250 * timeout parameter removed from Close()/cec_close(). return type changed to
251 void
252 * added cec_destroy() method
253 * removed timeout parameter from Transmit()
254 * change the default argument of PowerOnDevices() to CECDEVICE_TV
255 * removed PowerOffDevices(). use StandbyDevices() instead
256 * removed obsolete methods from the interface
257 * fixed bug: pthread_cond_wait was called without the mutex locked
258 * fixed possible deadlock: don't send messages and wait for an ack with the
259 mutex locked in CCECParser
260 * created a separate reader thread and fixed the 'lock timeout' bug
261 * testclient: use CECDEVICE_TV instead of the default argument
262 (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices()
263
264 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 00:48:00 +0200
265
a9bb5b56
LOK
266libcec (0.3-1) unstable; urgency=low
267
268 * added device detection support for Windows
269
270 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 02 Oct 2011 12:09:33 +0200
271
c3f9951c
LOK
272libcec (0.2-1) unstable; urgency=low
273
274 * added a Close() method to the interface
275 * Added CEC command that were received by the adapter in a buffer that can be
276 read by a client with GetNextCommand()/cec_get_next_command(). added a
277 'help' command to the test client, that displays all available commands
278 * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use
279 SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to
280 the testclient to set the logical address of the cec adapter
281 * Added optional logical and physical address parameters to
282 LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace
283 close tag in CECExports.h. updated interface documentation. bumped
284 interface version to 2.
285 * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the
286 test client. the previous one was too long and being rejected
287
288 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 28 Sep 2011 01:33:00 +0200
289
abbca718
LOK
290libcec (0.1-1) unstable; urgency=low
291
292 * Initial release v0.1
293
294 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 28 Sep 2011 23:55:48 +0200