| 1 | libcec (2.1.0-1) unstable; urgency=low |
| 2 | |
| 3 | * changed: |
| 4 | * added vendor id for Denon |
| 5 | * LibCECTray: Added ability to send modifiers by nesting commands in |
| 6 | KeyInput.cs. credits: Nate Burr |
| 7 | * rpi: Added /opt/vc/include/interface/vmcs_host/linux to rpi_cflags to fix |
| 8 | building on 'next' firmware branch. credits: Nedim Lisica |
| 9 | * fixed: |
| 10 | * don't send two active source message sequences to philips. issue #118 |
| 11 | * don't send deck status updates to philips when activating the source |
| 12 | * update the active source status correctly after a manual switch to |
| 13 | another source. closes #124 |
| 14 | * rename cec_audio_status() to cec_audio_get_status() to avoid conflict |
| 15 | with the cec_audio_status enum. This makes the C API compile again. |
| 16 | credits: Dave Chapman |
| 17 | * LibCECTray: Fixed bug with libcec adding the keyup for button commands |
| 18 | and making sure they are still executed. credits: Nate Burr |
| 19 | * rpi: don't wait for a response (and fail) when opening a connection. |
| 20 | issue #109 |
| 21 | * rpi: don't try to re-register a logical address when the logical address |
| 22 | isn't registered and we receive a VC_CEC_LOGICAL_ADDR_LOST message from |
| 23 | the firmware. issue #109 |
| 24 | |
| 25 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 22 Jan 2013 02:37:00 +0100 |
| 26 | |
| 27 | libcec (2.0.5-1) unstable; urgency=low |
| 28 | |
| 29 | * changed: |
| 30 | * also try polls at least twice when it failed |
| 31 | * added methods to get the audiostatus and toggle the mute status from the |
| 32 | amplifier (if connected) |
| 33 | * added comboKey and iComboKeyTimeoutMs to libcec_configuration |
| 34 | * force cec_user_control_code_unknown to 0xFF |
| 35 | * fixed: |
| 36 | * check unsupported features properly |
| 37 | * only send an active source message when the stream path changed and we |
| 38 | weren't the active source yet |
| 39 | * don't mark as inactive source on routing changes |
| 40 | * press & hold |
| 41 | * never mark user control opcodes as unsupported |
| 42 | * report our OSD name to the TV, since some TVs don't request it |
| 43 | * initial audiostatus value |
| 44 | * don't log a no longer relevant FIXME |
| 45 | |
| 46 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 6 Dec 2012 20:58:00 +0100 |
| 47 | |
| 48 | libcec (2.0.4-1) unstable; urgency=low |
| 49 | |
| 50 | * changed: |
| 51 | * dropped obsolete cec-config |
| 52 | * added CEC_CLIENT_VERSION_CURRENT and CEC_SERVER_VERSION_CURRENT. closes |
| 53 | #88 |
| 54 | * support colon separated data for the 'tx' command in cec-client |
| 55 | * mark the adapter as (in)active source for firmware v3+ |
| 56 | * added 'is' command to cec-client, to mark libCEC as inactive source |
| 57 | * fixed: |
| 58 | * only change the handler of the primary device if the tv has a quirks mode |
| 59 | not for other devices |
| 60 | * send an active source message when the route was set to the physical |
| 61 | address that is handled by libCEC |
| 62 | * default double tap timeout wasn't set for panasonic |
| 63 | * philips TVs sometimes keep sending key presses without key releases |
| 64 | * philips TVs ignore 'image view on' right after they were sent into |
| 65 | standby. check the power status of the tv every 5 seconds, until it |
| 66 | reports to have powered on |
| 67 | * mark a device as powered on when receiving a stream path or routing |
| 68 | change |
| 69 | * update the active source status correctly on stream path changes |
| 70 | * ensure that we only send 'image view on' when needed |
| 71 | * mark the TV as 'in transition standby -> on' after sending |
| 72 | 'image view on', so we don't spam the TV with 'image view on' command |
| 73 | while waiting for it to finish powering up. bugzid: 1603. bugzid: 1609. |
| 74 | bugzid: 1592 |
| 75 | * request the active source before requesting device information in |
| 76 | cec-client, or it'll display incorrect information when called the first |
| 77 | time |
| 78 | * update the value of CCECProcessor::m_bMonitor when registering a client. |
| 79 | SetControlled() wasn't called on exit, so it took 30 seconds until it was |
| 80 | auto-enabled |
| 81 | * silence 'unused' warning properly. closes #86 |
| 82 | * only change the type of the client to 'playback device' instead of |
| 83 | 'recorder' for panasonic if the TV is a panasonic. issue #84 |
| 84 | * always poll the TV if it's marked as not present. issue #83. issue #84 |
| 85 | * only set m_iCurrentButton when the duration isn't known yet. fixes |
| 86 | duplicate key press for vendor remote codes. closes #81 |
| 87 | * delete the right registry key |
| 88 | * send active source message when we received a routing change with a |
| 89 | device that is handled by libCEC as address. issue #89 |
| 90 | * return value wasn't updated in GetLogicalAddresses() |
| 91 | |
| 92 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 15 Nov 2012 02:26:00 +0100 |
| 93 | |
| 94 | libcec (2.0.3-1) unstable; urgency=low |
| 95 | |
| 96 | * changed: |
| 97 | * log unhandled vendor remote keycodes in the log, so they get logged |
| 98 | without debugging enabled |
| 99 | * double tap timeout increased from 200ms to 250ms |
| 100 | * CuBox/NXP* renamed to TDA995x* |
| 101 | * fixed: |
| 102 | * handling of active route changes. github issue #56 and issue #58 |
| 103 | * new combo key handling broke samsung's vendor specific remote buttons. |
| 104 | github issue #54 |
| 105 | * don't try to set controlled mode when using firmware version 1 and crash. |
| 106 | github issue #76 |
| 107 | * fix for LG models that send a vendor key up after a normal key down. |
| 108 | github issue #71 |
| 109 | * some TVs send keypresses to us without making us the active source. mark |
| 110 | us as active source when this happens. github issue #71 |
| 111 | * LG doesn't send routing changes, and marks the TV as active source when |
| 112 | switching to another source that's not been selected in the simplink menu |
| 113 | instead. this change keeps libCEC marked as powered on and keep the deck |
| 114 | state set to CEC_DECK_INFO_OTHER_STATUS_LG. fixes keypresses not working |
| 115 | after switching to another source and back to libCEC's hdmi port via the |
| 116 | source select menu instead of the simplink menu. github issue #71 |
| 117 | * don't respond with an abort message when receiving a vendor remote button |
| 118 | command |
| 119 | * respond with CEC_ABORT_REASON_INVALID_OPERAND when receiving a keypress |
| 120 | without a parameter |
| 121 | * typo in stop+pause combo key that prevented one of the keys from working |
| 122 | * rpi: log what data we received exactly when we receive an response from |
| 123 | the pi's firmware that doesn't match any command that we sent. issue #77 |
| 124 | * cubox: added adapter ID interface |
| 125 | |
| 126 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 31 Oct 2012 15:57:00 +0100 |
| 127 | |
| 128 | libcec (2.0.2-2) unstable; urgency=medium |
| 129 | |
| 130 | * fixed: |
| 131 | * updating the device status after a poll was broken and could reset the |
| 132 | status of devices that were marked as handled by libCEC to 'not |
| 133 | present' |
| 134 | * don't keep spamming the bus with a vendor command when an active source |
| 135 | switch is pending for panasonic, but only send it when needed |
| 136 | * reset CVLCommandHandler::m_bCapabilitiesSent when the TV goes to standby |
| 137 | |
| 138 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 15 Oct 2012 13:52:00 +0100 |
| 139 | |
| 140 | libcec (2.0.2-1) unstable; urgency=low |
| 141 | |
| 142 | * changed/added: |
| 143 | * missing from the previous changelog: added support for the CuBox TDA995x |
| 144 | credits: warped-rudi |
| 145 | * lower retry timeout for source switches |
| 146 | * cec-client: wait for the source switch to finish when cec-client is |
| 147 | called with the -s switch |
| 148 | * request the power status of the TV directly after registering a new |
| 149 | client |
| 150 | * fixed: |
| 151 | * don't keep trying to send 'image view on' commands to the TV when no TV |
| 152 | is connected, and just send the 'set active source' command. fixes source |
| 153 | switch and debug log spam for people without a TV connected |
| 154 | * don't keep waiting for an updated power status from the TV for Panasonic, |
| 155 | but request a status update once every 5 seconds, or we can possibly wait |
| 156 | forever for the tv to send it |
| 157 | * log what we received exactly when logging FIXME |
| 158 | * typo in CVLCommandHandler::VendorPreActivateSourceHook. bugzid: 1087 |
| 159 | * if we failed to get the physical address of the device that we are |
| 160 | connected to in the config, then try to use the address that was |
| 161 | persisted in the eeprom before resetting to the default value, 1.0.0.0. |
| 162 | closes #50. |
| 163 | * don't update the device status of unregistered/broadcast |
| 164 | * log all device status changes |
| 165 | * CCECClient::IsLibCECActiveSource returns false now while the active |
| 166 | source command is pending |
| 167 | * log failed acks and other errors in the debug log again |
| 168 | * don't send 'image view on' when the TV is already powering up |
| 169 | * reset the delayed source switch timeout properly, so we don't spam |
| 170 | commands every second |
| 171 | * don't change the device status when sending a delayed source switch |
| 172 | * don't send out commands to a device that is marked as not present or |
| 173 | handled by libCEC |
| 174 | |
| 175 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 11 Oct 2012 15:48:00 +0100 |
| 176 | |
| 177 | libcec (2.0.1-1) unstable; urgency=low |
| 178 | |
| 179 | * changed/added: |
| 180 | * added Loewe support |
| 181 | * added signal handlers to client applications |
| 182 | * Documentation updated |
| 183 | * replaced cec-config-gui by libCEC tray |
| 184 | * log the exact data for failed transmissions, not the opcode |
| 185 | * don't log every frame, unless debugging was enabled in ./configure or |
| 186 | visual studio |
| 187 | * changed some log levels from NOTICE to DEBUG, so the non-debugging output |
| 188 | is less spammy |
| 189 | * interface changes: |
| 190 | * WARNING: breaking API changes |
| 191 | * clean up: deprecated methods and fields removed |
| 192 | * callback parameters changed to fix plain C compilation |
| 193 | * added GetAdapterProductId()+GetAdapterVendorId()/ |
| 194 | cec_get_adapter_product_id()+cec_get_adapter_vendor_id() |
| 195 | * added iDoubleTapTimeoutMs to libcec_configuration |
| 196 | * remove all pre-v2.0 compatibility checks |
| 197 | * fixed: |
| 198 | * fix plain C compilation |
| 199 | * prevent sending directly addressed commands from being sent to broadcast |
| 200 | * don't wait for a response when sending a reply, so we don't block message |
| 201 | handling |
| 202 | * message response signaling and logging |
| 203 | * prevent double taps by not sending the same key press twice within 200ms |
| 204 | * fall back to the primary client when |
| 205 | CCECProcessor::HandleLogicalAddressLost() and no client could be found |
| 206 | * no more delay up to 2 seconds when exiting libCEC |
| 207 | * don't get caught in a loop in CVLCommandHandler when the source switch |
| 208 | was not allowed and no power status request was sent |
| 209 | * always send image view on to the tv, don't check the power status |
| 210 | * only respond to vendor commands for panasonic if we are the destination |
| 211 | * rpi: current firmware first sends a change to logical address 'broadcast' |
| 212 | and then signals us that the address was lost. libCEC then failed to |
| 213 | re-register, because it didn't know any client at this address |
| 214 | |
| 215 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 8 Oct 2012 21:30:00 +0100 |
| 216 | |
| 217 | libcec (1.9.1-1) unstable; urgency=low |
| 218 | |
| 219 | * changed/added: |
| 220 | * added the type of adapter to libcec_configuration, |
| 221 | and display the type in cec-client -l |
| 222 | * added device detection support for composite usb devices on windows. |
| 223 | needs the windows ddk, and it's expected to be found in |
| 224 | C:\WinDDK\7600.16385.1 |
| 225 | |
| 226 | * interface changes: |
| 227 | * adapter type was added to libcec_configuration |
| 228 | * moved cec_adapter_messagecode from cectypes.h to USBCECAdapterMessage.h |
| 229 | |
| 230 | * fixed: |
| 231 | * retry m_port->Read(..) if an EINTR errror occurs instead of closing the |
| 232 | connection. credits @Obruni. closes #38 |
| 233 | * make cec-client include cecloader.h from our project, not from system |
| 234 | * fixed duplicate entries check in CUSBCECAdapterDetection |
| 235 | * fixed missing cec_version updates in libcec_configuration |
| 236 | * transmit an active source message after <set stream path> to a device |
| 237 | that's handled by libCEC. closes #43 |
| 238 | * rpi: handle vendor specific remote control presses. closes #42 |
| 239 | * rpi: handle VC_CEC_LOGICAL_ADDR_LOST, sent by the Pi's firmware when |
| 240 | the logical address was taken while CEC was being reinitialised |
| 241 | * panasonic: send out an active source message when the tv started up |
| 242 | because it sometimes doesn't request this |
| 243 | |
| 244 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 5 Sep 2012 16:54:00 +0100 |
| 245 | |
| 246 | libcec (1.8.2-1) unstable; urgency=low |
| 247 | |
| 248 | * changed/added: |
| 249 | * p8: match to the response provided by the firmware when checking |
| 250 | responses (added in firmware v2 rev6) |
| 251 | |
| 252 | * fixed: |
| 253 | * windows: update the error message when an error occurs while writing to |
| 254 | the serial port |
| 255 | * delayed source switch time was reset, resulting in an attempt every |
| 256 | second until it succeeded |
| 257 | * ensure that the vendor commands are always sent for panasonic, and that |
| 258 | the deck status for lg isn't reset. fixes some buttons not working after |
| 259 | a second or delayed source switch |
| 260 | * added guard so ReplaceHandler() doesn't accidently try to replace a |
| 261 | handler for the broadcast address |
| 262 | * wait until the commandhandler is replaced before registering a client, |
| 263 | so we don't register a client and replace it directly afterwards if the |
| 264 | tv doesn't support the device type |
| 265 | * ensure that the command handler of the tv is replaced before registering |
| 266 | a client, or it might result in a double eeprom write attempt |
| 267 | * p8: don't disable controlled mode when switching to monitoring mode |
| 268 | * p8: do delayed eeprom writes async or it'll block processing other input |
| 269 | |
| 270 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 3 Aug 2012 02:35:00 +0100 |
| 271 | |
| 272 | libcec (1.8.1-1) unstable; urgency=low |
| 273 | |
| 274 | * changed/added: |
| 275 | * added support for the Raspberry Pi. |
| 276 | * added cec-client -i / cec-client --info that calls GetLibInfo() |
| 277 | * header cleanups |
| 278 | * added CAdapterFactory, to create IAdapterCommunication instances |
| 279 | * added --debug to configure, to include -ggdb |
| 280 | |
| 281 | * interface changes: |
| 282 | * added GetLibInfo()/cec_get_lib_info(), that shows how libCEC was compiled |
| 283 | and with which features included. |
| 284 | * added ToString(cec_user_control_code_key) to the interface |
| 285 | |
| 286 | * fixed: |
| 287 | * disallow sending CEC_OPCODE_SET_STREAM_PATH - not allowed by the CEC spec |
| 288 | * persist the configuration in the eeprom after initialising the client. |
| 289 | fixes wrong/old settings being used in autonomous mode, which broke the |
| 290 | wake on cec funtion |
| 291 | * persist the new configuration when the hdmi port setting changed |
| 292 | * cleaned locks around callbacks |
| 293 | * always set controlled mode to false when unregistering the last client. |
| 294 | fixes 30 second timeout before controlled mode gets deactivated |
| 295 | * updated the cached device type setting properly when persisting new |
| 296 | settings. correct return value from WriteEEPROM(). lock a mutex when |
| 297 | updating the state |
| 298 | * LibCecSharp: set the primary LA in CecLogicalAddresses |
| 299 | |
| 300 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 25 Jul 2012 13:05:00 +0100 |
| 301 | |
| 302 | libcec (1.7.2-1) unstable; urgency=low |
| 303 | |
| 304 | * changed/added: |
| 305 | * display a warning message if libCEC was not compiled with adapter |
| 306 | detection for the target platform |
| 307 | * panasonic: added a vendor command for panasonic that will enable routing |
| 308 | of some more buttons on the remote (guide, text, ...) |
| 309 | * standby command won't be forwarded more than once every 10 seconds |
| 310 | * added vendor ids for Akai, AOC, Benq, Daewoo, Grundig, Medion, Sharp and |
| 311 | Vizio |
| 312 | * cec-client: don't display debug output by default in 'cec-client -l' |
| 313 | |
| 314 | * interface changes: |
| 315 | * added a callback for clients that is called when a source is |
| 316 | (de)activated, so the client can respond to this action |
| 317 | * added cec_command::PushArray() |
| 318 | |
| 319 | * fixed: |
| 320 | * command forwarding. fixes player not going into standby mode |
| 321 | * missing virtual keyword in CCECCommandHandler:: |
| 322 | GetReplacementDeviceType() |
| 323 | * replace the handler (if needed) in GetHandler() |
| 324 | * reply with abort reason 'invalid operand' to vendor commands that we |
| 325 | don't understand |
| 326 | * changed all Handle...() commands to return a cec_abort_reason and send |
| 327 | the correct abort reason to the initiator as a response to directly |
| 328 | addressed messages |
| 329 | * changed 'couldn't change the ackmask: the connection is closed' into a |
| 330 | debug message |
| 331 | * don't send active source commands when the physical address is invalid or |
| 332 | unknown |
| 333 | * set the power status of a device to 'powered on' after it sends a stream |
| 334 | path change. can save an unneeded power state update request |
| 335 | * removed dupe code around delayed activate source commands. check for |
| 336 | delayed active source commands every 5 seconds instead of 15 seconds. |
| 337 | * panasonic: reset m_bPowerUpEventReceived in CVLCommandHandler when the |
| 338 | device lets us know it went into standby mode. fixes possibly failed |
| 339 | active source switches after it succeeded once |
| 340 | * panasonic: fixed delayed source switch for panasonic |
| 341 | * panasonic: mark the tv as powered up once it sends the audiomode request |
| 342 | * set the physical address of each device controlled by a CCECClient if |
| 343 | it's valid |
| 344 | * Windows could get stuck in a loop in case there an error occured while |
| 345 | reading registry entries |
| 346 | * ABI fixes (binary compat with v1.2 for Windows and v1.5.2 for others) |
| 347 | * replace the handler directly after getting the vendor id of a device when |
| 348 | registering a client |
| 349 | * copy the class member values of the old handler when creating a new |
| 350 | command handler, or a delayed activate source will get lost when the |
| 351 | handler is switched |
| 352 | * cec-client: wrong client version |
| 353 | * Makefile cleanups. don't link cec-client and cec-config against libudev |
| 354 | and liblockdev |
| 355 | * pin libcec to the same version as libcec1 |
| 356 | * LibCecSharp: update the local configuration after connecting |
| 357 | * LibCecSharp: better handling of callbacks |
| 358 | |
| 359 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 27 Jun 2012 02:06:00 +0100 |
| 360 | |
| 361 | libcec (1.7.1-1) unstable; urgency=low |
| 362 | |
| 363 | * changed/added: |
| 364 | * added physical address detection via ADL for AMD graphics cards |
| 365 | * attempt to get the edid from nvidia's graphics card driver on linux via |
| 366 | /proc/acpi/video/NGFX/HDMI/EDID |
| 367 | * attempt to get the PA from the registry on windows if we fail to get the |
| 368 | physical address from the display driver |
| 369 | * changed the order in CCECClient::SetPhysicalAddress() so it first checks |
| 370 | whether a PA override is set in libcec_configuration.iPhysicalAddress, |
| 371 | then checks whether the address can be detected, and if both failed it'll |
| 372 | use the HDMI port + base device setting |
| 373 | * cec-client: only active the source when reconnecting if libcec was the |
| 374 | active source before closing the connection |
| 375 | * platform: added tcp server sockets for posix |
| 376 | |
| 377 | * interface changes: |
| 378 | * libcec_configuration.bAutodetectAddress is now read-only, and will be set |
| 379 | to 1 by libCEC if the PA was autodetected |
| 380 | * LibCecSharp: don't use an int but a CecUserControlCode in a CecKeypress |
| 381 | |
| 382 | * fixed: |
| 383 | * don't unregister clients in CLibCEC when disconnecting, but only in |
| 384 | CCECProcessor. fixes reconnect after close |
| 385 | * MSGCODE_TIMEOUT_ERROR is a response to a transmission |
| 386 | * retry 'activate source' every 10 seconds if it failed |
| 387 | * don't respond with a poll from the broadcast address when receiving |
| 388 | in CSLCommandHandler::HandleDeviceVendorId(), but use the primary LA of |
| 389 | the client as source instead |
| 390 | * hold a lock when changing the ackmask in |
| 391 | CUSBCECAdapterCommunication::Open |
| 392 | * don't respond with a feature abort to opcode play messages. bugzid: 873 |
| 393 | * get the vendor id of the TV before allocating logical addresses, so we |
| 394 | can determine if the TV supports the requested device type directly |
| 395 | * TransmitImageViewOn() and TransmitActiveSource() always returned true, |
| 396 | even if sending the command failed, so the retry for failed source |
| 397 | activations was never triggered |
| 398 | * open libcec.so.1 instead of libcec.so in cecloader.h. credits @coling. |
| 399 | github issue #30. |
| 400 | * fixed missing firmware version and build date in cec-client -l / |
| 401 | GetDeviceInformation() |
| 402 | |
| 403 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 10 Jun 2012 13:39:00 +0100 |
| 404 | |
| 405 | libcec (1.6.1-5) unstable; urgency=low |
| 406 | |
| 407 | * synced /debian directory with the one in precise (with a couple of changes) |
| 408 | * changed/added: |
| 409 | * serial port locking on linux |
| 410 | * cec-client: added -m/--monitor startup options, which will start a |
| 411 | monitor-only client. use 'mon 0' to switch to a normal client |
| 412 | * display an alert message when the firmware of the adapter can be upgraded |
| 413 | * added CEC 1.4 opcodes |
| 414 | * send a feature abort again for all unhandled commands |
| 415 | * refactored CLibCEC so a client registers itself within CCECProcessor, |
| 416 | which then allocates one or more logical addresses for it. |
| 417 | |
| 418 | * interface changes: |
| 419 | * added a new setting, bMonitorOnly, which will start a monitor-only client |
| 420 | |
| 421 | * fixed: |
| 422 | * ensure that we don't crash out when trying to stop a thread that hasn't |
| 423 | been started yet |
| 424 | * don't send a 'disconnected' alert when the close method is called |
| 425 | * use the correct source when transmitting an abort message as a reposonse |
| 426 | to a vendor command with id |
| 427 | * removed statics |
| 428 | * check the client version, not the server version in |
| 429 | libcec_configuration::operator==() |
| 430 | * cec-config: fix physical address detection |
| 431 | * LibCecSharp: fixed buffer overrun when copying libcec_configuration. |
| 432 | fixes crash when trying to save the configuration in the config gui. |
| 433 | |
| 434 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 14 May 2012 22:39:00 +0100 |
| 435 | |
| 436 | libcec (1.6.1-2) unstable; urgency=low |
| 437 | |
| 438 | * Build depends on pkg-config. (Closes: #669919) |
| 439 | * libudev-dev only optionally needed for Linux. |
| 440 | |
| 441 | -- Andres Mejia <amejia@debian.org> Sat, 21 Apr 2012 19:03:19 -0400 |
| 442 | |
| 443 | libcec (1.6.1-1) unstable; urgency=low |
| 444 | |
| 445 | [ Mario Limonciello ] |
| 446 | * New upstream version (LP: #982272) |
| 447 | |
| 448 | [ Andres Mejia ] |
| 449 | * New release fixes build failure with GCC-4.7. (Closes: #667241) |
| 450 | * Bump to Standards-Version 3.9.3. |
| 451 | |
| 452 | -- Andres Mejia <amejia@debian.org> Sat, 21 Apr 2012 00:02:08 -0400 |
| 453 | |
| 454 | libcec (1.3.2-3) unstable; urgency=low |
| 455 | |
| 456 | * Make dpkg-source options default for packaging. |
| 457 | |
| 458 | -- Andres Mejia <amejia@debian.org> Tue, 10 Jan 2012 18:12:57 -0500 |
| 459 | |
| 460 | libcec (1.3.2-2) unstable; urgency=low |
| 461 | |
| 462 | * Add options to pass to dpkg-source. |
| 463 | |
| 464 | -- Andres Mejia <amejia@debian.org> Sun, 08 Jan 2012 22:59:34 -0500 |
| 465 | |
| 466 | libcec (1.3.2-1) unstable; urgency=low |
| 467 | |
| 468 | * Initial release. (Closes: #655143) |
| 469 | |
| 470 | -- Andres Mejia <amejia@debian.org> Sun, 08 Jan 2012 15:36:49 -0500 |
| 471 | |
| 472 | libcec (1.6-3) unstable; urgency=low |
| 473 | |
| 474 | * changed/added: |
| 475 | * cec-client: show the firmware build date if available in cec-client -l |
| 476 | * cec-client: don't activate the source when starting |
| 477 | * cec-client: group up the output of the 'scan' command, and add the |
| 478 | currently active source to the output |
| 479 | * log the libCEC version in the 'connected to the CEC adapter' log entry, |
| 480 | and add the firmware build date to the line if it's available, so all |
| 481 | relevant version info is available in 1 log line. |
| 482 | * async writes for CUSBCECAdapterCommunication. less locks and polls, more |
| 483 | speed |
| 484 | * added 'make docs' target, that updates the doxygen documentation |
| 485 | |
| 486 | * interface changes: |
| 487 | * added operator == and != for libcec_configuration |
| 488 | * added GetResponseOpcode(cec_opcode opcode) to cec_command |
| 489 | * added the firmware build date to libcec_configuration, so it can be |
| 490 | displayed by the client too. |
| 491 | * added static CLibCEC::Alert() method and CEC_ALERT_CONNECTION_LOST value |
| 492 | * added a callback to handle menu state changes. if the callback method |
| 493 | returns 1, then the change is processed by the CCECBusDevice too. if 0, |
| 494 | then the CCECBusDevice will always have menu state 'activated', so |
| 495 | keypresses are routed. bugzid: 724 |
| 496 | * added a default menu language to libcec_configuration and set this |
| 497 | language for devices controlled by libcec. bugzid: 69 |
| 498 | |
| 499 | * fixed |
| 500 | * CCECProcessor::IsActiveSource() - TV was never checked |
| 501 | * don't call the deprecated SetActiveView() method in cec-client |
| 502 | * request the active source if unknown in CCECProcessor::GetActiveSource() |
| 503 | * don't try to match a device with PA 0xFFFF. |
| 504 | * don't change the power status of a device when changing the stream path |
| 505 | * don't set the power status to 'powered off' when marking the source |
| 506 | managed by libcec as inactive, or the tv will might send a power control |
| 507 | keycode when making it active again, potentially shutting down the system |
| 508 | * potential segfault in CCECProcessor::GetDeviceByPhysicalAddress() |
| 509 | * stream path changes when changed to the TV source (PA 0) |
| 510 | * clear the unsupported features list in CCECBusDevice::ResetDeviceStatus() |
| 511 | * never mark vendor commands as unsupported (only some may be unsupported), |
| 512 | as well as some others that should never be marked unsupported |
| 513 | * don't retry in CCECCommandHandler if the command has been marked as |
| 514 | unsupported |
| 515 | * don't request the PA of devices when handling an incoming CEC command, or |
| 516 | it'll block things while waiting for a response. if that response never |
| 517 | comes, or comes late, then other incoming commands will be timed out |
| 518 | before they are handled |
| 519 | * optimisation - strip unneeded virtual keywords from top level |
| 520 | implementations |
| 521 | * use the vlcommandhandler for the primary device that is handled by libCEC |
| 522 | when a panasonic tv is detected, so delayed activate source commands are |
| 523 | using the correct handler. bugzid: 723 |
| 524 | * set the power status of device controlled by libCEC to |
| 525 | CEC_POWER_STATUS_ON |
| 526 | instead of IN_TRANSITION_STANDBY_TO_ON. reset the device status of a |
| 527 | device if it was detected as removed. bugzid: 755 |
| 528 | * potentially uninitialised values in cec_command |
| 529 | * delay the 'active source' command for panasonic, until the vendor command |
| 530 | that reports that the TV is powered on has been received. bugzid: 723 |
| 531 | * only respond to Give Physical Address with Report Physical Address. |
| 532 | bugzid: 592 |
| 533 | This fixes several reports of the TV improperly switching to the libcec |
| 534 | device after it has previously switched to another source. Fix confirmed |
| 535 | with Panasonic and also reported to be an issue with Samsung and |
| 536 | Philips. |
| 537 | * check whether callback methods are set to a valid ptr |
| 538 | * number of retries for polls |
| 539 | * win32: fix build in paths with spaces. bugzid: 730 |
| 540 | * LibCecSharp: free the alert GC callback when cleaning up |
| 541 | * the wrong setting was being read when powering on devices |
| 542 | * close the connection when a comm error was detected, and notify the |
| 543 | client via an alert |
| 544 | * don't segfault when calling ThreadsWait() without a valid thread |
| 545 | * lib/platform: fixed memleak |
| 546 | * leak in CCECAdapterMessageQueue::Write |
| 547 | * don't send commands if we know them to be unsupported. bugzid: 725 |
| 548 | |
| 549 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Apr 2012 11:30:00 +0100 |
| 550 | |
| 551 | libcec (1.6-2) unstable; urgency=low |
| 552 | |
| 553 | * fixed: |
| 554 | * fixed typo in CUSBCECAdapterCommands::RequestSettings() that prevented |
| 555 | the settings from being read. the settings were still written, but never |
| 556 | read when bGetSettingsFromROM = 1. |
| 557 | |
| 558 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Apr 2012 11:30:00 +0100 |
| 559 | |
| 560 | libcec (1.6-1) unstable; urgency=medium |
| 561 | |
| 562 | * changed/added: |
| 563 | * full firmware V2 support |
| 564 | * -o/--osdname argument for cec-client to set a custom osd name |
| 565 | * added the firmware version to cec-client's -l / --list-devices command. |
| 566 | bugzid: 631 |
| 567 | * added power on command for Samsung AVR devices. bugzid: 361 |
| 568 | * added buttoncode for 'channels list' on Samsung (0x96) |
| 569 | * don't check for the windows ddk when a prebuilt driver installer is |
| 570 | present |
| 571 | * respond to Get Menu Language. bugzid: 547. In the event that the menu |
| 572 | language is undefined in libcec (currently the default), the response |
| 573 | will be a feature abort. |
| 574 | |
| 575 | * interface changes: |
| 576 | * added the firmware version to libcec_configuration (read-only). bumped |
| 577 | server version to 1.6.0. fixed 'unknown server version' message on |
| 578 | startup. bugzid: 631 |
| 579 | * added a new setting to control whether to put the TV in standby when the |
| 580 | player is put in standby. added some missing bits (version numbers, |
| 581 | config) to LibCecSharp. bugzid: 558 |
| 582 | * added an alert callback. bugzid: 462 |
| 583 | * added bShutdownOnStandby to libcec_configuration. bugzid: 660. This |
| 584 | setting tells the client to shutdown when the TV switches off and is |
| 585 | complimentary to bPowerOffOnStandby, which tells the PC to suspend. |
| 586 | They are kept separate to maintain backwards compatability. |
| 587 | |
| 588 | * fixed |
| 589 | * gcc 4.7 compilation |
| 590 | * poll doesn't have an opcode. bugzid: 591 |
| 591 | * wait for MSGEND when data was received when opening the connection. |
| 592 | bugzid: 536 |
| 593 | * mark the correct device as active source after a stream path change. |
| 594 | if the new address is not found, but the old address is, then mark the |
| 595 | old address as inactive. fixes TV switching back to the old active source |
| 596 | when it scans for devices. bugzid: 592 |
| 597 | * ensure that the vendor ID is sent before trying to activate any SL device |
| 598 | bugzid: 574 |
| 599 | * fixed possible crash when in CLibCEC::IsLibCECActiveSource() when libCEC |
| 600 | doesn't know which device is the active source. bugzid: 479 |
| 601 | * correct handling CEC_USER_CONTROL_CODE_POWER. This ensures that the power |
| 602 | code always operates as a toggle, depending on the current state, and |
| 603 | that SetCurrentButton is always called for a valid user control code. |
| 604 | bugzid: 570 |
| 605 | * frequency wasn't checked in GetTimeMs(), leading to incorrect wait times |
| 606 | on some windows systems |
| 607 | * refactored USB adapter communication. less locks, shorter locks, added |
| 608 | documentation, lots of clean ups and no more incoming messages that are |
| 609 | skipped |
| 610 | * the destructor of CSerialSocket didn't call Close() |
| 611 | * added guards in CSerialPort |
| 612 | * reset m_socket to INVALID_SERIAL_SOCKET_VALUE after closing the |
| 613 | connection |
| 614 | * always wait for thread exit in CThread's desctructor |
| 615 | * crash on exit after GetDeviceInformation() |
| 616 | * check whether the destination is valid before setting anything in |
| 617 | m_bWaitingForAck. fixes heap corruption and crash on exit. bugzid: 479 |
| 618 | * bUseTVMenuLanguage from libcec_configuration wasn't copied in |
| 619 | SetConfiguration(), so this setting was reset to the default value |
| 620 | (enabled) every time. bugzid: 617 |
| 621 | * request the vendor id of a device if needed when the device status is |
| 622 | changed into 'present'. bugzid: 361 |
| 623 | * give priority to messages from the TV. removed the global lock in |
| 624 | CCECProcessor when sending. this is no longer needed. bugzid: 238 |
| 625 | * add some bounds checking to the HDMI port number. bugzid: 508 |
| 626 | * fixed usbser.sys copying in the driver .INF. bugzid: 503 |
| 627 | * only update the physical address when it has actually changed. bugzid: |
| 628 | 672 |
| 629 | * moved the static variables in os-threads from the header to a separate |
| 630 | cpp file, or it could lead to problems when included multiple times |
| 631 | * don't send an active source command when the physical address couldn't be |
| 632 | set, or it might confuse other CEC devices |
| 633 | * serial socket timeouts. bugzid: 654 |
| 634 | * fixed possible crash when trying to request a vendor id of a device when |
| 635 | the address of libCEC isn't known yet. bugzid: 654 |
| 636 | * extra guard so no commands are transmitted without a valid initiator. |
| 637 | bugzid: 654 |
| 638 | * moved the timed ping to a separate thread. bugzid: 654 |
| 639 | * persist settings directly when they're changed, only persist settings |
| 640 | that actually changed, only instruct the device to persist the settings |
| 641 | in eeprom when something changed, and don't persist settings on exit. |
| 642 | bugzid: 715 |
| 643 | * cec-config-gui: persist settings both in the eeprom and in the settings |
| 644 | xml file |
| 645 | * validate the input in CCECProcessor::IsActiveSource(). fixes potential |
| 646 | crash when the active source isn't known. bugzid: 671 |
| 647 | |
| 648 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 16 Apr 2012 18:03:00 +0100 |
| 649 | |
| 650 | libcec (1.5-4) unstable; urgency=low |
| 651 | |
| 652 | * changed/added: |
| 653 | * OS-X installation requirements and pointer |
| 654 | * full v2 firmware support: |
| 655 | * ping the adapter every 15 seconds. bugzid: 541 |
| 656 | * added v2 msgcodes. bugzid: 543 |
| 657 | * implemented the write methods for the v2 configuration. bugzid: 543 |
| 658 | * included the logical addresses in the persisted configuration for v2. |
| 659 | bugzid: 543 |
| 660 | * persist the configuration before closing the connection. only try to |
| 661 | persist the configuration when talking to a v2 firmware. bugzid: 543 |
| 662 | * added GetSetting() to CUSBCECAdapterCommunication. bugzid: 543 |
| 663 | * read the persisted settings from the ROM, and update it in |
| 664 | libcec_configuration if found. bugzid: 543 |
| 665 | * cec-client: set bGetSettingsFromROM to 1 in cec-client. bugzid: 543 |
| 666 | * cec-client: only read persisted EEPROM settings when -r or --rom is |
| 667 | provided as cmdline arg. bugzid: 543 |
| 668 | * call SetControlledMode(false) as last command when closing the |
| 669 | connection in v2. bugzid: 542 |
| 670 | * initial FreeBSD support: simply try to use ttyU* |
| 671 | |
| 672 | * fixed: |
| 673 | * set controlled mode and retry to send the previous command if it failed |
| 674 | with MSGCODE_COMMAND_REJECTED |
| 675 | * m_iLineTimeout was never initialised and used. fixes MSGCODE_REJECTED |
| 676 | when transmitting a message and incorrect line timeouts being used |
| 677 | * mac configure compile bugzid: 157 |
| 678 | * cec-config-gui: fixed application exit when the user clicked 'no' when |
| 679 | asked to reconnect. bugzid: 556 |
| 680 | * only wait for multiple 'command accepted' response when sending a |
| 681 | transmit command, and only to 1 in other cases. bugzid: 543 |
| 682 | * set the correct logical address mask before switching to autonomous mode. |
| 683 | bugzid: 543 |
| 684 | * re-added SetLineTimeout(). bugzid: 543 |
| 685 | * CUSBCECAdapterCommunication::SetControlledMode checked for the wrong sent |
| 686 | state |
| 687 | * os-x: don't add 0.5 before dividing in GetTimeMs() |
| 688 | * os-x: struct timespec now values weren't set correctly |
| 689 | |
| 690 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 16 Mar 2012 10:12:00 +0100 |
| 691 | |
| 692 | libcec (1.5-3) unstable; urgency=low |
| 693 | |
| 694 | * fixed: |
| 695 | * OS-X compilation |
| 696 | * default to firmware version 1 after 3 tries. some versions didn't send a |
| 697 | version. |
| 698 | * fixed cec-config win32 compilation |
| 699 | |
| 700 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 03 Mar 2012 15:21:00 +0100 |
| 701 | |
| 702 | libcec (1.5-2) unstable; urgency=low |
| 703 | |
| 704 | * changed/added: |
| 705 | * added Toshiba's vendor id, and set the device ID of the primary device to |
| 706 | Toshiba's and transmit it when starting |
| 707 | * lock in SyncedBuffer |
| 708 | * added a timeout to StopThread() |
| 709 | * also add commands to unsupported features when receiving |
| 710 | CEC_ABORT_REASON_REFUSED |
| 711 | * cec-config-gui: set cbPortNumber enabled when the physical address |
| 712 | override isn't checked instead |
| 713 | * cec-config-gui: added support for the new 'send inactive source' setting |
| 714 | |
| 715 | * interface changes: |
| 716 | * added an 'send inactive source' option to libcec_configuration, only |
| 717 | supported by client/server 1.5.1 and up. bugzid: 439 |
| 718 | * added a command to the interface to start the bootloader directly, |
| 719 | without going through all checks. bugzid: 218 |
| 720 | * LibCecSharp: implemented support for the new 'send inactive source' |
| 721 | setting |
| 722 | |
| 723 | * fixed: |
| 724 | * don't send an updated configuration when libCEC hasn't been initialised |
| 725 | fully. bugzid: 459 |
| 726 | * don't send an updated configuration back when initialising. let the |
| 727 | client call the GetCurrentConfiguration() method. bugzid: 459 |
| 728 | * configuration updates from libCEC. bugzid: 459 |
| 729 | * fixed accidental double deref. the method parameter already does that. |
| 730 | github #24 |
| 731 | * use CLOCK_MONOTONIC for timing info, since gettimeofday is affected by |
| 732 | ntp and by manually adjusting the system time |
| 733 | * the timeout value of pthread_cond_timedwait has to be referenced to |
| 734 | CLOCK_REALTIME |
| 735 | * don't add data to the input buffer in CUSBCECAdapterCommunication before |
| 736 | it's fully initialised |
| 737 | * fixed return value of CUSBCECAdapterCommunication::ParseMessage(). fixes |
| 738 | messages not being parsed in certain occasions |
| 739 | * don't try to transmit when the processor is being stopped |
| 740 | * set the server version in the LibCEC's constructor, since this is |
| 741 | checked by clients. fixes 'invalid libCEC version' popup when inserting |
| 742 | the adapter |
| 743 | * don't wait for the full timeout to pass in CCECProcessor:: |
| 744 | OpenConnection(), but retry to connect 2 times. fixes 'port busy' errors |
| 745 | when initialising libCEC. bugzid: 436 |
| 746 | * use the correct Sleep() method in CCECProcessor::OpenConnection(). the |
| 747 | thread hasn't been started there yet, so the sleep wasn't working. fixes |
| 748 | 'device or resource busy' when plugging in the adapter. bugzid: 436 |
| 749 | * check the adapter ping and firmware before starting the reader thread, so |
| 750 | we really leave the com port alone for a second when it fails because of |
| 751 | a busy error. bugzid: 436 |
| 752 | * ensure that the connection is really closed before retrying to connect. |
| 753 | bugzid: 436 |
| 754 | * LibCecSharp: recreate the delegates properly when (re)connecting to |
| 755 | LibCecSharp |
| 756 | |
| 757 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 28 Feb 2012 21:19:00 +0100 |
| 758 | |
| 759 | libcec (1.5-1) unstable; urgency=low |
| 760 | |
| 761 | * changed/added: |
| 762 | * a new libcec_configuration structs, which allows the client app to pass |
| 763 | a number of new options, like waking multiple devices on startup, |
| 764 | overriding the vendor id, etc. |
| 765 | * a new configuration GUI for Windows (.NET). this allows you to set |
| 766 | libCEC's configuration for XBMC in a convenient GUI. |
| 767 | * a CLI configuration tool (unfinished) for other platforms. will be |
| 768 | finished in an update. |
| 769 | * implemented power up for LG devices other than a TV |
| 770 | * win32: don't install libcec to the system directory by default, and |
| 771 | delete previous (testing) copies if present |
| 772 | * wait for multiple responses, not just for one at a time |
| 773 | * set the ackmask to 0 when closing the connection |
| 774 | * don't send 'image view on' when calling SetActiveSource() |
| 775 | * don't send power on, acitve source and standby commands by default in |
| 776 | cec-client |
| 777 | * platform: added CTryLockObject |
| 778 | * platform: added an Init() method in CTimeout, so it can be reset |
| 779 | |
| 780 | * interface changes: |
| 781 | * added a new initialiser method: CecInitialise()/cec_initialise(), that |
| 782 | accepts a "libc_configuration" struct as parameter. this way, the |
| 783 | signature of the init method can stay the same when adding new options. |
| 784 | in LibCecSharp, the new method appears as a new constructor. |
| 785 | * added CanPersistConfiguration()/cec_can_persist_configuration() |
| 786 | * added PersistConfiguration()/cec_persist_configuration() |
| 787 | * added GetCurrentConfiguration()/cec_get_current_configuration() |
| 788 | * added SetConfiguration()/cec_set_configuration() |
| 789 | * added GetLogicalAddresses()/cec_get_logical_addresses(): returns the list |
| 790 | of addresses controlled by libCEC |
| 791 | * added RescanDevices()/cec_rescan_devices(): lets libCEC force polls to |
| 792 | all logical addresses. |
| 793 | * added a callback that is called when libCEC's configuration changed. |
| 794 | * moved the autodetect address api call to libcec_configuration. only send |
| 795 | power up commands to non-tv devices when the power state is not |
| 796 | on/transition->on. let players call the power up/power down command. |
| 797 | * return the anynet return keycode directly instead of translating it to |
| 798 | 'return' for v1.5.0+ clients |
| 799 | * extracted CecSharpTypes.h in LibCecSharp. LibCecSharp is now in the |
| 800 | CecSharp namespace |
| 801 | * include the local cectypes.h in cec.h and cecc.h instead of system wide |
| 802 | * deprecated GetLibVersion() methods. use libcec_configuration instead |
| 803 | * removed deprecated CECCreate() method |
| 804 | |
| 805 | * fixed: |
| 806 | * fixed a lot of LG specific issues |
| 807 | * fixed OS-X compilation. credits: Dustin Cooper |
| 808 | * fixed a couple of possible deadlocks, e.g. when closing the connection |
| 809 | while receiving data |
| 810 | * cleaned up existing code |
| 811 | * libCEC no longer puts incoming data in a fifo buffer, but tries to |
| 812 | process it directly, which fixes issues like libCEC blocking processing |
| 813 | new commands while waiting for transmission acks. |
| 814 | * 'unsupported command' marking in CCECBusDevice |
| 815 | * ensure that the ackmask is always set to 0 when closing the connection |
| 816 | and that the call doesn't block the Close() call |
| 817 | * don't try to read or write in CUSBCECAdapterCommunication when the |
| 818 | connection has been closed |
| 819 | * LibCecSharp: added quotes to the linker statement for libcec.lib. fixes |
| 820 | compilation in paths with spaces. closes #20 |
| 821 | * LibCecSharp: set the callback methods in libcec to NULL before closing |
| 822 | the connection, since these might already have been destroyed in .NET |
| 823 | * LibCecSharp: delete the internal callback struct when closing the |
| 824 | connection |
| 825 | * LibCecSharp: pass correctly formatted logical address lists |
| 826 | * ensure that the vendor id is requested first when requesting info from a |
| 827 | device, so we are using the correct handler |
| 828 | * keep the 'busy state' of the command handler in CCECBusDevice |
| 829 | * poll the next device when the current is handled by libCEC. |
| 830 | * check the vendor id of a device before sending a power on command |
| 831 | * ensure that there always is at least one device type set |
| 832 | * transmit a keypress and key release as power on command when the target |
| 833 | device isn't the TV |
| 834 | * don't do a full reinit when not needed |
| 835 | * fix active source switches for the standard CEC implementation |
| 836 | * ensure that we don't send data to ourself |
| 837 | * check whether the port is open, not whether libCEC is initialised in |
| 838 | Transmit() |
| 839 | * platform: fixed return value from CCondition::Wait() |
| 840 | * platform: don't broadcast but wake one thread in |
| 841 | CProtectedSocket::MarkReady() |
| 842 | * platform: include stdint.h in windows/os-types.h instead of typedef'ing |
| 843 | ints |
| 844 | * platform: fixed tcp socket error handling and return value. |
| 845 | * platform: fixed return values of socket operations in lib/platform |
| 846 | * platform: added predicate in CCondition |
| 847 | * deleted the signed driver from the tree, since that doesn't work. let the |
| 848 | installer create a new signed driver on the production build system |
| 849 | |
| 850 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 19 Feb 2012 01:04:00 +0100 |
| 851 | |
| 852 | libcec (1.4-4) unstable; urgency=low |
| 853 | |
| 854 | * changed/added: |
| 855 | * added tcp client sockets to lib/platform (WIP) |
| 856 | * clean up lib/platform |
| 857 | * added: set controlled mode on after opening a connection to the adapter |
| 858 | (for firmware v2) |
| 859 | * added an IAdapterCommunicationCallback interface an use a callback method |
| 860 | to pass newly received cec_commands to CCECProcessor |
| 861 | * added "driver only" and "driver + libcec" sections to the installer |
| 862 | * added a signed driver |
| 863 | * created a separate driver installer, which is included in the libCEC |
| 864 | installer. uninstalls the old unsigned version of libCEC and the driver |
| 865 | when it's found and installs the new one in C:\Program Files(x86)\ |
| 866 | Pulse Eight\USB-CEC Adapter. |
| 867 | * don't sign development binaries with a temporary key. devs can do that |
| 868 | themselves when they want LibCecSharp in the GAC |
| 869 | * interface changes: |
| 870 | * added SetStreamPath()/cec_set_stream_path_logical()/ |
| 871 | cec_set_stream_path_physical() to the interface, to send a |
| 872 | "set stream path" command over the CEC bus, used to activate another |
| 873 | source. |
| 874 | * fixed: |
| 875 | * transmit 'menu state activated' after the stream path has been set to a |
| 876 | device that is handled by libCEC. should fix remote commands not working |
| 877 | properly on Panasonic TVs and after another source has been active. |
| 878 | bugzid: 233 |
| 879 | * set the ackmask to 0x0 when trying to find a free logical address |
| 880 | * keep trying to reconnect to the com port until the timeout runs out. |
| 881 | bugzid: 230 |
| 882 | * wait 500 ms before trying to retransmit a command. always wait for the |
| 883 | result of a transmission in CCECCommandHandler::Transmit() |
| 884 | * receive and send full cec_commands, not CCECAdapterMessages in |
| 885 | CAdapterCommunication. extract an IAdapterCommunication interface. fixed |
| 886 | potentially missed data in CAdapterCommunication |
| 887 | * close and delete the connection when the processor thread ends. fixes |
| 888 | reconnect after standby (access denied / connection already opened) |
| 889 | * don't replace handlers when not initialised, or the primary device's |
| 890 | logical addres isn't known yet, which can lead to crashes. don't call |
| 891 | handlers directly in CCECProcessor without holding a lock on them |
| 892 | * fixed possible crash when command handler were switched while it was |
| 893 | being used |
| 894 | * keep the mutex locked when calling ReplaceHandlers() in CCECProcessor |
| 895 | * win32: also timeout when data is received in SocketRead() |
| 896 | * win32: fixed < vista runtime and compilation |
| 897 | * win32: ping the adapter and request the firmware version in |
| 898 | CUSBCECAdapterCommunication instead of CCECProcesssor. fixes failed |
| 899 | libCEC inits |
| 900 | * win32: fixed crash on exit in LibCecSharp |
| 901 | |
| 902 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 6 Feb 2012 14:26:00 +0100 |
| 903 | |
| 904 | libcec (1.4-3) unstable; urgency=low |
| 905 | |
| 906 | * fixed: |
| 907 | * try to ping the device and grab the firmware version until the connect |
| 908 | timeout runs out. fixes failed reconnect after standby, when the adapter |
| 909 | is still being initialised |
| 910 | |
| 911 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 27 Jan 2012 13:05:00 +0100 |
| 912 | |
| 913 | libcec (1.4-2) unstable; urgency=low |
| 914 | |
| 915 | * changed/added: |
| 916 | * added a firmware flash script for linux. |
| 917 | usage: ./support/cec-flash-device.sh /path/to/firware.hex |
| 918 | * refactored threading/locking - added windows native instead of |
| 919 | pthread-win32, so we can compile native x64 too |
| 920 | * check whether the adapter responds when connecting to it and report the |
| 921 | firmware version of the adapter after connecting |
| 922 | * moved create-installer.cmd to support/ |
| 923 | * completely removed AM_SILENT_RULES |
| 924 | * interface changes: |
| 925 | * compile LibCecSharp against .NET framework 2.0 and sign the assembly |
| 926 | * fixed: |
| 927 | * only the key release events were sent, not keypresses, which appeared in |
| 928 | clients as laggy keypresses |
| 929 | * fixed reconnect after standby |
| 930 | * wait for active tranmission to finish when opening a connection to the |
| 931 | adapter. fixes initialisation errors |
| 932 | * set the default transmit timeout properly instead of using 0 |
| 933 | * fixed possible deadlock because of a negative timeout in |
| 934 | CAdapterCommunication::WaitForTransmitSucceeded() |
| 935 | * fixed error message in cec-client (unable to open the device on port ...) |
| 936 | * exit cec-client after entering bootloader mode |
| 937 | * MSGCODE_START_BOOTLOADER doesn't respond with MSGCODE_COMMAND_ACCEPTED |
| 938 | |
| 939 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 25 Jan 2012 23:28:00 +0100 |
| 940 | |
| 941 | libcec (1.4-1) unstable; urgency=low |
| 942 | |
| 943 | * changed/added: |
| 944 | * added the vendor id for Sony |
| 945 | * always refresh the power state of a device when it hasn't been updated |
| 946 | for 30 seconds |
| 947 | * do silent builds by default |
| 948 | * interface changes: |
| 949 | * added optional callback methods to libCEC. enable them by calling |
| 950 | EnableCallbacks(ICECCallbacks *callbacks) / |
| 951 | cec_enable_callbacks(ICECCallbacks *callbacks). after this method is |
| 952 | called, the GetNext...() methods will not return any data |
| 953 | * added the same callbacks to LibCecSharp. implement CecCallbackMethods |
| 954 | and override the methods in there |
| 955 | * fixed: |
| 956 | * use the given timeout when trying to open a connection to the CEC |
| 957 | adapter |
| 958 | * resolved difference between method name in LibCECC.cpp and cecc.h. |
| 959 | credits: Doug Johnson |
| 960 | * don't transmit physical addresses while holding a lock in CCECProcessor |
| 961 | * don't hold a lock when sending an active source message. |
| 962 | * unload libCEC when the lib version is invalid |
| 963 | * "unused" warnings suppressed |
| 964 | |
| 965 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 12 Jan 2012 19:06:00 +0100 |
| 966 | |
| 967 | libcec (1.3-3) unstable; urgency=low |
| 968 | |
| 969 | * changed/added: |
| 970 | * place in libudev include in an extern C block. fixes compilations on |
| 971 | older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann |
| 972 | * added pkg-config to the dependencies list. issue #15 |
| 973 | * updated README. closes #14 |
| 974 | * added a script that tests some basic functions of the CEC adapter: |
| 975 | /support/cec-test-device.sh |
| 976 | * fixed: |
| 977 | * don't make libCEC the active source when changing the physical address. |
| 978 | don't send active source messages on startup, when not the active source |
| 979 | fixes unwanted device power ups |
| 980 | * replace the command handler directly after receiving a changed vendor |
| 981 | id. change the primary type from recording device to playback device |
| 982 | for panasonic TVs |
| 983 | * don't send a deck status update when sending an active source message |
| 984 | for panasonic TVs |
| 985 | * only switch handlers once when using the generic handler |
| 986 | * don't switch handlers when not needed |
| 987 | * hold a lock in CCECProcessor::SetHDMIPort() |
| 988 | * don't send deck status updates when sending an active source message by |
| 989 | default |
| 990 | |
| 991 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 3 Jan 2012 22:48:00 +0100 |
| 992 | |
| 993 | libcec (1.3-2) unstable; urgency=low |
| 994 | |
| 995 | * changed/added: |
| 996 | * copy libcec.dll to the XBMC installation dir when XBMC is found |
| 997 | * disable background polling. let the client request this info when needed |
| 998 | * update the power status of a device when it's set to |
| 999 | CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON |
| 1000 | * wait for the correct response when requesting something, not just any |
| 1001 | response |
| 1002 | * don't keep trying the same command/request after receiving a feature |
| 1003 | abort message |
| 1004 | * interface changes: |
| 1005 | * change the previously unused boolean parameter in volume control methods |
| 1006 | to bSendRelease, and only send a key release when it's true. default to |
| 1007 | true |
| 1008 | * fixed: |
| 1009 | * don't send the power up/down keypress to listeners when in the initial |
| 1010 | device state (powered off). fixes unexpected shutdown in XBMC when |
| 1011 | connecting to the CEC adapter. |
| 1012 | * send a 'menu state activated' command when starting up. bugzid: 113 |
| 1013 | * don't wait for a response when not needed |
| 1014 | * don't hold a lock while waiting for a response. fixes failed libCEC |
| 1015 | inits and slow responses |
| 1016 | * don't replace a command handler when it's being used. fixes possible |
| 1017 | crash on startup |
| 1018 | * don't try to do anything before the processor thread has started |
| 1019 | * don't transmit active source messages when the physical address is |
| 1020 | still 0xFFFF |
| 1021 | * don't init the default handler before the physical address is known |
| 1022 | |
| 1023 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 29 Dec 2011 03:05:00 +0100 |
| 1024 | |
| 1025 | libcec (1.3-1) unstable; urgency=low |
| 1026 | |
| 1027 | * changed/added: |
| 1028 | * make libudev optional. if libudev is not available on linux, adapter |
| 1029 | autodetection will also not be available. fixes compilation on Hardy/ATV1 |
| 1030 | * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET |
| 1031 | language |
| 1032 | * added vendor support for LG |
| 1033 | * added vendor support for Philips |
| 1034 | * added vendor support for Yamaha |
| 1035 | * added vendor support for Onkyo |
| 1036 | * added 'scan' command to cec-client, that displays info about devices on |
| 1037 | the bus. made all ToString() methods available on the interface. |
| 1038 | * added '-s' or '--single-command' to cec-client. starting cec-client with |
| 1039 | this parameter executes a single command in cec-client and does not power |
| 1040 | on devices on startup and power them off on exit. this way, you can use |
| 1041 | cec-client in a shell script. since there's some handshaking involved at |
| 1042 | startup, this is not very fast. to execute a command and only display the |
| 1043 | result and any error/warning, execute it with |
| 1044 | RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch |
| 1045 | files are a bit different) |
| 1046 | * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to |
| 1047 | cec-client's parameters |
| 1048 | * handle image view on and text view on |
| 1049 | * handle routing information and report physical address opcodes |
| 1050 | * handle audio status updates |
| 1051 | * send ping and bootloader commands via the output queue |
| 1052 | * scan the CEC bus for devices when starting libcec |
| 1053 | * pass all commands that are directed at libcec to listeners |
| 1054 | * interface changes: |
| 1055 | * added GetActiveSource()/cec_get_active_source() |
| 1056 | * added IsActiveSource()/cec_is_active_source() |
| 1057 | * added GetDevicePhysicalAddress()/cec_get_device_physical_address() |
| 1058 | * added GetDeviceOSDName()/cec_get_osd_name() |
| 1059 | * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/ |
| 1060 | cec_send_key_release() |
| 1061 | * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(), |
| 1062 | MuteAudio()/cec_mute_audio() |
| 1063 | * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/ |
| 1064 | cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type(). |
| 1065 | * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load |
| 1066 | and when a device with the same physical address is detected, libcec will |
| 1067 | use the selected hdmi port on that device. should fix source selection on |
| 1068 | other devices, like an amplifier |
| 1069 | * added a hook in libcec for physical address autodetection |
| 1070 | * fixed: |
| 1071 | * don't request the physical address from the tv (it's always 0x0000) |
| 1072 | * set the proper ackmask before doing anything else |
| 1073 | * don't unlock the transmit mutex in CCECProcessor while waiting for an |
| 1074 | answer |
| 1075 | * fix device polling |
| 1076 | * refactor CEC read/write. keep a single lock for all writes, not one per |
| 1077 | device |
| 1078 | * ignore other data while waiting for a response |
| 1079 | * retry failed tranmissions |
| 1080 | * don't delete a message before it's been sent when starting the bootloader |
| 1081 | * or when sending a ping |
| 1082 | * fixed possible segfault when switching the command handler after a vendor |
| 1083 | * id changed |
| 1084 | * handle audio opcodes correctly |
| 1085 | * inactive source should be directly addressed at the TV |
| 1086 | * don't report a changed physical address when it hasn't changed |
| 1087 | * routing information sets the stream path, not the physical address |
| 1088 | * don't scan the whole bus in CCECProcessor::IsActiveDeviceType() |
| 1089 | * don't request the vendor id from devices that are handled by libcec |
| 1090 | * mark device status as present when a command was received from a device |
| 1091 | * always send a power on command in CCECBusDevice::PowerOn() |
| 1092 | * don't request updates statusses unless needed |
| 1093 | * report physical address sends 3 parameters, not 2. check whether the |
| 1094 | device type is correct |
| 1095 | * devices can send vendor commands from other vendors, so don't assume the |
| 1096 | device is of a certain vendor when it sends commands with a vendor id |
| 1097 | * thread safety fixes. bugzid: 19 |
| 1098 | * clear any previous input when opening a connection to the adapter. |
| 1099 | bugzid: 54 |
| 1100 | * use the correct source address in CSLCommandHandler::HandleVendorCommand() |
| 1101 | * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5 |
| 1102 | * renamed enum methods. fixes potential macro collision with isset(). |
| 1103 | thanks davilla |
| 1104 | * don't change the active device when receiving stream path changed |
| 1105 | messages. fixes wrong source selection when powering after the TV. |
| 1106 | |
| 1107 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 09 Dec 2011 12:16:00 +0100 |
| 1108 | |
| 1109 | libcec (1.2-1) unstable; urgency=low |
| 1110 | |
| 1111 | * bugfixes: |
| 1112 | * pass the deck_control command to libcec listeners |
| 1113 | * check whether the initiator is valid in CCECProcessor::ParseCommand(). |
| 1114 | fixes possible segfault when parsing invalid data |
| 1115 | |
| 1116 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 12 Nov 2011 13:36:00 +0100 |
| 1117 | |
| 1118 | libcec (1.1-3) unstable; urgency=low |
| 1119 | |
| 1120 | * fixed return value in CCECProcessor::SetStreamPath(), which prevented |
| 1121 | active source and menu state from being sent |
| 1122 | |
| 1123 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 23:36:00 +0100 |
| 1124 | |
| 1125 | libcec (1.1-2) unstable; urgency=low |
| 1126 | |
| 1127 | * forgot to update the headers to v1.1 |
| 1128 | |
| 1129 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 18:56:00 +0100 |
| 1130 | |
| 1131 | libcec (1.1-1) unstable; urgency=low |
| 1132 | |
| 1133 | * interface changes: |
| 1134 | * added logical address autodetection and let libcec handle multiple types |
| 1135 | simultaniously. for logical address autodetection, you have to use |
| 1136 | CECInit()/cec_init_typed() instead of CECCreate()/cec_init() |
| 1137 | * added SetActiveSource()/cec_set_active_source() to the interface. |
| 1138 | deprecated SetActiveView()/cec_set_active_view() |
| 1139 | * added SetMenuState() |
| 1140 | * added PollDevice()/cec_poll_device() |
| 1141 | * removed duplicate method SetActiveSource() / SetActiveView() |
| 1142 | * added SetDeckControlMode() and SetDeckInfo() |
| 1143 | * fixed: |
| 1144 | * added vendor detection for panasonic and broadcast active view and set |
| 1145 | menu state when a panasonic device sets the stream path. thanks for the |
| 1146 | pointer cptcoconut. |
| 1147 | * added vendor code for pioneer |
| 1148 | * osd string is 13 chars max. don't send more |
| 1149 | * send the correct cec version for each device |
| 1150 | * switch to panasonic specific cec implementation if a panasonic device was |
| 1151 | detected |
| 1152 | * send the correct device type in TransmitPhysicalAddress() |
| 1153 | * send a reply from the correct device when the stream path is requested |
| 1154 | * opcode 0x80 means the stream path changed, not the physical address |
| 1155 | * don't poll for a vendor ID in monitoring mode |
| 1156 | * fixed parameter parsing in SetVendorId() |
| 1157 | * buffer up commands that are received while waiting for an ack. only send |
| 1158 | 'active source' message for the actual active source |
| 1159 | * win32: prepend the com port path with '\\.\', so com ports > 9 can be |
| 1160 | accessed. thanks smolesen |
| 1161 | * audio systems cannot be an active source, so don't transmit active |
| 1162 | source message from this device |
| 1163 | * only send 'active source' when powered on |
| 1164 | * only set the osd name for the primary device. use default values for |
| 1165 | others |
| 1166 | * increase physical address with 0x100 per device |
| 1167 | * win32: removed unneeded afxres.h include in the resource files, which |
| 1168 | is not present when using studio express. thanks Ghuron |
| 1169 | * fixed C headers |
| 1170 | * mark the active source as active and other devices as inactive |
| 1171 | * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER |
| 1172 | * transmit the menu state as (active) when the stream path is set |
| 1173 | * changed: |
| 1174 | * changed copyright of boblight files with permission of the original |
| 1175 | author |
| 1176 | * partial handling of audio related opcodes |
| 1177 | * more consistent log messages |
| 1178 | * set a device type and name for each CCECBusDevice |
| 1179 | * keep a power and menu state per device |
| 1180 | * renamed all Broadcast...() and Report...() methods to Transmit...() |
| 1181 | * renamed SetOSDString() to TransmitOSDString() |
| 1182 | * changed debug level of 'did not receive ack' from error to debug |
| 1183 | * only set the power status to 'on' for the primary device |
| 1184 | * moved method decriptions from cecc.h to cec.h |
| 1185 | * only send a power on command when a device isn't on already and set |
| 1186 | the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while |
| 1187 | powering on |
| 1188 | * handle CEC_OPCODE_STANDBY |
| 1189 | * handle CEC_OPCODE_ACTIVE_SOURCE |
| 1190 | * always start in standby mode and let the tv (or other device) send the |
| 1191 | power on command |
| 1192 | * renamed the last few enums |
| 1193 | * handle deck related opcodes. |
| 1194 | * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown' |
| 1195 | |
| 1196 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 17:42:00 +0100 |
| 1197 | |
| 1198 | libcec (1.0-1) unstable; urgency=low |
| 1199 | |
| 1200 | * interface changes: |
| 1201 | * set lib interface version back to 1.0 and rename GetLibVersion() to |
| 1202 | GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion() |
| 1203 | * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor |
| 1204 | version number to 1 |
| 1205 | * fixed: |
| 1206 | * samsung's vendor specific remote keypresses don't send key releases. added |
| 1207 | call to AddKey() directly after the keypress |
| 1208 | * always reset the button press time in CLibCEC::AddKey() |
| 1209 | * always wait for a signal in CCECProcessor::Transmit() |
| 1210 | * changed: |
| 1211 | * drop shared_ptr and use a normal pointer. removed boost dependency |
| 1212 | |
| 1213 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 04 Nov 2011 00:14:00 +0100 |
| 1214 | |
| 1215 | libcec (0.8-2) unstable; urgency=low |
| 1216 | |
| 1217 | * added 'libboost-dev' to build deps |
| 1218 | |
| 1219 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 23:31:00 +0100 |
| 1220 | |
| 1221 | libcec (0.8-1) unstable; urgency=low |
| 1222 | |
| 1223 | * interface changes: |
| 1224 | * added GetDevicePowerStatus()/cec_get_device_power_status() |
| 1225 | * added GetDeviceVendorId()/cec_get_device_vendor_id() |
| 1226 | * added GetDeviceMenuLanguage()/cec_get_device_menu_language() |
| 1227 | * added GetDeviceCecVersion()/cec_get_device_cec_version() |
| 1228 | * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when |
| 1229 | monitoring is enabled, the device will only log the data it received, |
| 1230 | but will not respond to any message |
| 1231 | * removed timeout parameter in Transmit() and included the ack timeout in |
| 1232 | the cec_command struct |
| 1233 | * made the vendor id -> vendor name translation available |
| 1234 | * made CEC_LOG levels powers of 2 |
| 1235 | * introduced CEC_LOG_TRAFFIC log level |
| 1236 | * fixed: |
| 1237 | * set the correct ackmask on startup |
| 1238 | * wait for ack while keeping a lock |
| 1239 | * wait for the processor thread to start before continueing on startup |
| 1240 | * wait for messages to be transmitted before continueing in |
| 1241 | CCECProcessor::Transmit() |
| 1242 | * only set the logical address once when it has changed |
| 1243 | * correct source for broadcast messages |
| 1244 | * win32: create Release type installer |
| 1245 | * changed: |
| 1246 | * make all reads and write in CAdapterCommunication go through buffers. |
| 1247 | * poll for a vendor ID of connected devices and switch to a non-standard |
| 1248 | CEC implementation if needed. |
| 1249 | * added vendor detection of Samsung and LG devices |
| 1250 | * handle samsung remote command 'return' |
| 1251 | * cec-client: |
| 1252 | * added -la and --logical-address to the command line params |
| 1253 | * added -d and --log-level params to cec-client |
| 1254 | * added -sf and --short-log-file, which only log the actual messages, not |
| 1255 | the level and timestamp |
| 1256 | * added -f and --log-file parameters to cec-client |
| 1257 | * added option to change the log level to cec-client |
| 1258 | |
| 1259 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 22:58:00 +0100 |
| 1260 | |
| 1261 | libcec (0.7-1) unstable; urgency=low |
| 1262 | |
| 1263 | * send a keypress with 0 duration when a key is pressed and with a duration |
| 1264 | set when it's released |
| 1265 | * added SetOSDString() to the interface (not supported by all tvs) |
| 1266 | * fixed: 'routing change' is a broadcast message. log routing changes, but |
| 1267 | don't send a 'set active view' message, so the active input won't be |
| 1268 | changed |
| 1269 | * log keypresses in the debug log |
| 1270 | * added 'pa' command to cec-client, to change the physical address |
| 1271 | * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so |
| 1272 | the HDMI port number to use can be changed |
| 1273 | * fixed: put the message processing code from WaitForAck() in ParseMessage(). |
| 1274 | fixes missing incoming message logging of non-data messages when not |
| 1275 | waiting for an ACK |
| 1276 | * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK |
| 1277 | before returning |
| 1278 | * fixed: set initiator and destination first in cec_command::push_back(). |
| 1279 | fixes 'tx' command in cec-client |
| 1280 | * fixed: keep trying to connect while iTimeout isn't reached (default 10 |
| 1281 | seconds). fixes exit with a 'permission denied' error when the device isn't |
| 1282 | ready yet. remove CEC_SETTLE_DOWN_TIME |
| 1283 | * fixed: don't call SetActiveView() when reporting the power status. fixes |
| 1284 | loop which causes some TVs to report failed connections |
| 1285 | * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed. |
| 1286 | * fixed: add the device type as parameter when sending the physical address. |
| 1287 | thanks bobo1on1 |
| 1288 | * fixed: typo in libcec.pc.in |
| 1289 | * added optional strLib parameter to LoadLibCec(), so the location of the |
| 1290 | shared library can be specified |
| 1291 | * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB |
| 1292 | * use int instead of bool on the public C interface and remove stdbool.h include |
| 1293 | * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h => |
| 1294 | cecloader.h, CECTypes.h => cectypes.h |
| 1295 | * updated debian package. split up libcec and libcec-dev |
| 1296 | * fixed: changed to use dlopen instead of static linkage. shuffled headers a |
| 1297 | bit. bumped interface to version 7 |
| 1298 | * removed 'rt' from libraries. it's not needed (anymore) |
| 1299 | * fixed: reset the active view after a routing change. issue #1 |
| 1300 | * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an |
| 1301 | error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear |
| 1302 | * added contributors link |
| 1303 | |
| 1304 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 14 Oct 2011 17:34:00 +0200 |
| 1305 | |
| 1306 | libcec (0.6-1) unstable; urgency=low |
| 1307 | |
| 1308 | * bumped interface version to 6 |
| 1309 | * fixed packet output (reporting the OSD name correctly now) |
| 1310 | * refactored packet structs: split up in cec commands and adapter messages |
| 1311 | * fixed i/o timings |
| 1312 | * added Darwin support (thanks Davilla!) |
| 1313 | * fixed WaitForAck() |
| 1314 | * fixed possible deadlock when starting a new thread |
| 1315 | * implemented vendor id and device class parsing. full detection will follow |
| 1316 | * added "on" and "standby" commands to the test client |
| 1317 | * retransmit packets if needed |
| 1318 | * fix GetTimeMs() on linux |
| 1319 | * added timestamp to log messages |
| 1320 | |
| 1321 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 09 Oct 2011 15:15:00 +0200 |
| 1322 | |
| 1323 | libcec (0.5-1) unstable; urgency=low |
| 1324 | |
| 1325 | * bumped interface version to 5 |
| 1326 | * don't pass std::string and std::vector accross the interface |
| 1327 | * fixed heap corruption crashes on windows |
| 1328 | * fixed some memory leaks |
| 1329 | * reset all structs to default values before doing with them |
| 1330 | |
| 1331 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 07 Oct 2011 22:00:00 +0200 |
| 1332 | |
| 1333 | libcec (0.4-3) unstable; urgency=low |
| 1334 | |
| 1335 | * fixed reconnect |
| 1336 | * fixed some threading related bugs |
| 1337 | * fixed deadlock on exit |
| 1338 | * fixed wrongly reported physical address |
| 1339 | |
| 1340 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 06 Oct 2011 00:19:00 +0200 |
| 1341 | |
| 1342 | libcec (0.4-2) unstable; urgency=low |
| 1343 | |
| 1344 | * fixed int parameter sizes and some signed/unsigned warnings |
| 1345 | * check whether m_port isn't NULL in ReadFromDevice |
| 1346 | * stop the processor thread and delete the CSerialPort instance on exit |
| 1347 | * added mutex in CSerialPort |
| 1348 | * fix segfault on exit |
| 1349 | * renamed libPlatform -> platform. |
| 1350 | * stuck everything from libCEC in the CEC namespace to avoid namespace |
| 1351 | polution |
| 1352 | |
| 1353 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 23:45:00 +0200 |
| 1354 | |
| 1355 | libcec (0.4-1) unstable; urgency=low |
| 1356 | |
| 1357 | * bumped interface version to 4 |
| 1358 | * timeout parameter removed from Close()/cec_close(). return type changed to |
| 1359 | void |
| 1360 | * added cec_destroy() method |
| 1361 | * removed timeout parameter from Transmit() |
| 1362 | * change the default argument of PowerOnDevices() to CECDEVICE_TV |
| 1363 | * removed PowerOffDevices(). use StandbyDevices() instead |
| 1364 | * removed obsolete methods from the interface |
| 1365 | * fixed bug: pthread_cond_wait was called without the mutex locked |
| 1366 | * fixed possible deadlock: don't send messages and wait for an ack with the |
| 1367 | mutex locked in CCECParser |
| 1368 | * created a separate reader thread and fixed the 'lock timeout' bug |
| 1369 | * testclient: use CECDEVICE_TV instead of the default argument |
| 1370 | (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices() |
| 1371 | |
| 1372 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 00:48:00 +0200 |
| 1373 | |
| 1374 | libcec (0.3-1) unstable; urgency=low |
| 1375 | |
| 1376 | * added device detection support for Windows |
| 1377 | |
| 1378 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 02 Oct 2011 12:09:33 +0200 |
| 1379 | |
| 1380 | libcec (0.2-1) unstable; urgency=low |
| 1381 | |
| 1382 | * added a Close() method to the interface |
| 1383 | * Added CEC command that were received by the adapter in a buffer that can be |
| 1384 | read by a client with GetNextCommand()/cec_get_next_command(). added a |
| 1385 | 'help' command to the test client, that displays all available commands |
| 1386 | * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use |
| 1387 | SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to |
| 1388 | the testclient to set the logical address of the cec adapter |
| 1389 | * Added optional logical and physical address parameters to |
| 1390 | LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace |
| 1391 | close tag in CECExports.h. updated interface documentation. bumped |
| 1392 | interface version to 2. |
| 1393 | * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the |
| 1394 | test client. the previous one was too long and being rejected |
| 1395 | |
| 1396 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 28 Sep 2011 01:33:00 +0200 |
| 1397 | |
| 1398 | libcec (0.1-1) unstable; urgency=low |
| 1399 | |
| 1400 | * Initial release v0.1 |
| 1401 | |
| 1402 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 28 Sep 2011 23:55:48 +0200 |