cec: fixed - the wrong setting was being read when powering on devices. added debug...
[deb_libcec.git] / Doxyfile
... / ...
CommitLineData
1# Doxyfile 1.6.3
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8# TAG = value [value, ...]
9# For lists items can also be appended using:
10# TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# This tag specifies the encoding used for all characters in the config file
18# that follow. The default is UTF-8 which is also the encoding used for all
19# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20# iconv built into libc) for the transcoding. See
21# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23DOXYFILE_ENCODING = UTF-8
24
25# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26# by quotes) that should identify the project.
27
28PROJECT_NAME = libCEC
29
30# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31# This could be handy for archiving the generated documentation or
32# if some version control system is used.
33
34PROJECT_NUMBER =
35
36# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37# base path where the generated documentation will be put.
38# If a relative path is entered, it will be relative to the location
39# where doxygen was started. If left blank the current directory will be used.
40
41OUTPUT_DIRECTORY = documentation
42
43# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44# 4096 sub-directories (in 2 levels) under the output directory of each output
45# format and will distribute the generated files over these directories.
46# Enabling this option can be useful when feeding doxygen a huge amount of
47# source files, where putting all generated files in the same directory would
48# otherwise cause performance problems for the file system.
49
50CREATE_SUBDIRS = NO
51
52# The OUTPUT_LANGUAGE tag is used to specify the language in which all
53# documentation generated by doxygen is written. Doxygen will use this
54# information to generate all constant output in the proper language.
55# The default language is English, other supported languages are:
56# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
58# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
59# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
60# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
61# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
62
63OUTPUT_LANGUAGE = English
64
65# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66# include brief member descriptions after the members that are listed in
67# the file and class documentation (similar to JavaDoc).
68# Set to NO to disable this.
69
70BRIEF_MEMBER_DESC = YES
71
72# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73# the brief description of a member or function before the detailed description.
74# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75# brief descriptions will be completely suppressed.
76
77REPEAT_BRIEF = YES
78
79# This tag implements a quasi-intelligent brief description abbreviator
80# that is used to form the text in various listings. Each string
81# in this list, if found as the leading text of the brief description, will be
82# stripped from the text and the result after processing the whole list, is
83# used as the annotated text. Otherwise, the brief description is used as-is.
84# If left blank, the following values are used ("$name" is automatically
85# replaced with the name of the entity): "The $name class" "The $name widget"
86# "The $name file" "is" "provides" "specifies" "contains"
87# "represents" "a" "an" "the"
88
89ABBREVIATE_BRIEF =
90
91# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
92# Doxygen will generate a detailed section even if there is only a brief
93# description.
94
95ALWAYS_DETAILED_SEC = NO
96
97# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
98# inherited members of a class in the documentation of that class as if those
99# members were ordinary class members. Constructors, destructors and assignment
100# operators of the base classes will not be shown.
101
102INLINE_INHERITED_MEMB = YES
103
104# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
105# path before files name in the file list and in the header files. If set
106# to NO the shortest path that makes the file name unique will be used.
107
108FULL_PATH_NAMES = YES
109
110# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
111# can be used to strip a user-defined part of the path. Stripping is
112# only done if one of the specified strings matches the left-hand part of
113# the path. The tag can be used to show relative paths in the file list.
114# If left blank the directory from which doxygen is run is used as the
115# path to strip.
116
117STRIP_FROM_PATH =
118
119# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
120# the path mentioned in the documentation of a class, which tells
121# the reader which header file to include in order to use a class.
122# If left blank only the name of the header file containing the class
123# definition is used. Otherwise one should specify the include paths that
124# are normally passed to the compiler using the -I flag.
125
126STRIP_FROM_INC_PATH =
127
128# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
129# (but less readable) file names. This can be useful is your file systems
130# doesn't support long names like on DOS, Mac, or CD-ROM.
131
132SHORT_NAMES = NO
133
134# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
135# will interpret the first line (until the first dot) of a JavaDoc-style
136# comment as the brief description. If set to NO, the JavaDoc
137# comments will behave just like regular Qt-style comments
138# (thus requiring an explicit @brief command for a brief description.)
139
140JAVADOC_AUTOBRIEF = NO
141
142# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
143# interpret the first line (until the first dot) of a Qt-style
144# comment as the brief description. If set to NO, the comments
145# will behave just like regular Qt-style comments (thus requiring
146# an explicit \brief command for a brief description.)
147
148QT_AUTOBRIEF = NO
149
150# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
151# treat a multi-line C++ special comment block (i.e. a block of //! or ///
152# comments) as a brief description. This used to be the default behaviour.
153# The new default is to treat a multi-line C++ comment block as a detailed
154# description. Set this tag to YES if you prefer the old behaviour instead.
155
156MULTILINE_CPP_IS_BRIEF = NO
157
158# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
159# member inherits the documentation from any documented member that it
160# re-implements.
161
162INHERIT_DOCS = YES
163
164# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
165# a new page for each member. If set to NO, the documentation of a member will
166# be part of the file/class/namespace that contains it.
167
168SEPARATE_MEMBER_PAGES = NO
169
170# The TAB_SIZE tag can be used to set the number of spaces in a tab.
171# Doxygen uses this value to replace tabs by spaces in code fragments.
172
173TAB_SIZE = 2
174
175# This tag can be used to specify a number of aliases that acts
176# as commands in the documentation. An alias has the form "name=value".
177# For example adding "sideeffect=\par Side Effects:\n" will allow you to
178# put the command \sideeffect (or @sideeffect) in the documentation, which
179# will result in a user-defined paragraph with heading "Side Effects:".
180# You can put \n's in the value part of an alias to insert newlines.
181
182ALIASES =
183
184# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
185# sources only. Doxygen will then generate output that is more tailored for C.
186# For instance, some of the names that are used will be different. The list
187# of all members will be omitted, etc.
188
189OPTIMIZE_OUTPUT_FOR_C = NO
190
191# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
192# sources only. Doxygen will then generate output that is more tailored for
193# Java. For instance, namespaces will be presented as packages, qualified
194# scopes will look different, etc.
195
196OPTIMIZE_OUTPUT_JAVA = NO
197
198# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
199# sources only. Doxygen will then generate output that is more tailored for
200# Fortran.
201
202OPTIMIZE_FOR_FORTRAN = NO
203
204# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
205# sources. Doxygen will then generate output that is tailored for
206# VHDL.
207
208OPTIMIZE_OUTPUT_VHDL = NO
209
210# Doxygen selects the parser to use depending on the extension of the files it parses.
211# With this tag you can assign which parser to use for a given extension.
212# Doxygen has a built-in mapping, but you can override or extend it using this tag.
213# The format is ext=language, where ext is a file extension, and language is one of
214# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
215# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
216# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
217# use: inc=Fortran f=C. Note that for custom extensions you also need to set
218# FILE_PATTERNS otherwise the files are not read by doxygen.
219
220EXTENSION_MAPPING =
221
222# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
223# to include (a tag file for) the STL sources as input, then you should
224# set this tag to YES in order to let doxygen match functions declarations and
225# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
226# func(std::string) {}). This also make the inheritance and collaboration
227# diagrams that involve STL classes more complete and accurate.
228
229BUILTIN_STL_SUPPORT = YES
230
231# If you use Microsoft's C++/CLI language, you should set this option to YES to
232# enable parsing support.
233
234CPP_CLI_SUPPORT = NO
235
236# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
237# Doxygen will parse them like normal C++ but will assume all classes use public
238# instead of private inheritance when no explicit protection keyword is present.
239
240SIP_SUPPORT = NO
241
242# For Microsoft's IDL there are propget and propput attributes to indicate getter
243# and setter methods for a property. Setting this option to YES (the default)
244# will make doxygen to replace the get and set methods by a property in the
245# documentation. This will only work if the methods are indeed getting or
246# setting a simple type. If this is not the case, or you want to show the
247# methods anyway, you should set this option to NO.
248
249IDL_PROPERTY_SUPPORT = YES
250
251# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
252# tag is set to YES, then doxygen will reuse the documentation of the first
253# member in the group (if any) for the other members of the group. By default
254# all members of a group must be documented explicitly.
255
256DISTRIBUTE_GROUP_DOC = NO
257
258# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
259# the same type (for instance a group of public functions) to be put as a
260# subgroup of that type (e.g. under the Public Functions section). Set it to
261# NO to prevent subgrouping. Alternatively, this can be done per class using
262# the \nosubgrouping command.
263
264SUBGROUPING = YES
265
266# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
267# is documented as struct, union, or enum with the name of the typedef. So
268# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
269# with name TypeT. When disabled the typedef will appear as a member of a file,
270# namespace, or class. And the struct will be named TypeS. This can typically
271# be useful for C code in case the coding convention dictates that all compound
272# types are typedef'ed and only the typedef is referenced, never the tag name.
273
274TYPEDEF_HIDES_STRUCT = NO
275
276# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
277# determine which symbols to keep in memory and which to flush to disk.
278# When the cache is full, less often used symbols will be written to disk.
279# For small to medium size projects (<1000 input files) the default value is
280# probably good enough. For larger projects a too small cache size can cause
281# doxygen to be busy swapping symbols to and from disk most of the time
282# causing a significant performance penality.
283# If the system has enough physical memory increasing the cache will improve the
284# performance by keeping more symbols in memory. Note that the value works on
285# a logarithmic scale so increasing the size by one will rougly double the
286# memory usage. The cache size is given by this formula:
287# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
288# corresponding to a cache size of 2^16 = 65536 symbols
289
290SYMBOL_CACHE_SIZE = 0
291
292#---------------------------------------------------------------------------
293# Build related configuration options
294#---------------------------------------------------------------------------
295
296# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
297# documentation are documented, even if no documentation was available.
298# Private class members and static file members will be hidden unless
299# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
300
301EXTRACT_ALL = NO
302
303# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
304# will be included in the documentation.
305
306EXTRACT_PRIVATE = NO
307
308# If the EXTRACT_STATIC tag is set to YES all static members of a file
309# will be included in the documentation.
310
311EXTRACT_STATIC = YES
312
313# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
314# defined locally in source files will be included in the documentation.
315# If set to NO only classes defined in header files are included.
316
317EXTRACT_LOCAL_CLASSES = YES
318
319# This flag is only useful for Objective-C code. When set to YES local
320# methods, which are defined in the implementation section but not in
321# the interface are included in the documentation.
322# If set to NO (the default) only methods in the interface are included.
323
324EXTRACT_LOCAL_METHODS = YES
325
326# If this flag is set to YES, the members of anonymous namespaces will be
327# extracted and appear in the documentation as a namespace called
328# 'anonymous_namespace{file}', where file will be replaced with the base
329# name of the file that contains the anonymous namespace. By default
330# anonymous namespace are hidden.
331
332EXTRACT_ANON_NSPACES = NO
333
334# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
335# undocumented members of documented classes, files or namespaces.
336# If set to NO (the default) these members will be included in the
337# various overviews, but no documentation section is generated.
338# This option has no effect if EXTRACT_ALL is enabled.
339
340HIDE_UNDOC_MEMBERS = NO
341
342# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
343# undocumented classes that are normally visible in the class hierarchy.
344# If set to NO (the default) these classes will be included in the various
345# overviews. This option has no effect if EXTRACT_ALL is enabled.
346
347HIDE_UNDOC_CLASSES = NO
348
349# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
350# friend (class|struct|union) declarations.
351# If set to NO (the default) these declarations will be included in the
352# documentation.
353
354HIDE_FRIEND_COMPOUNDS = NO
355
356# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
357# documentation blocks found inside the body of a function.
358# If set to NO (the default) these blocks will be appended to the
359# function's detailed documentation block.
360
361HIDE_IN_BODY_DOCS = NO
362
363# The INTERNAL_DOCS tag determines if documentation
364# that is typed after a \internal command is included. If the tag is set
365# to NO (the default) then the documentation will be excluded.
366# Set it to YES to include the internal documentation.
367
368INTERNAL_DOCS = NO
369
370# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
371# file names in lower-case letters. If set to YES upper-case letters are also
372# allowed. This is useful if you have classes or files whose names only differ
373# in case and if your file system supports case sensitive file names. Windows
374# and Mac users are advised to set this option to NO.
375
376CASE_SENSE_NAMES = YES
377
378# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
379# will show members with their full class and namespace scopes in the
380# documentation. If set to YES the scope will be hidden.
381
382HIDE_SCOPE_NAMES = NO
383
384# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
385# will put a list of the files that are included by a file in the documentation
386# of that file.
387
388SHOW_INCLUDE_FILES = YES
389
390# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
391# will list include files with double quotes in the documentation
392# rather than with sharp brackets.
393
394FORCE_LOCAL_INCLUDES = NO
395
396# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
397# is inserted in the documentation for inline members.
398
399INLINE_INFO = YES
400
401# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
402# will sort the (detailed) documentation of file and class members
403# alphabetically by member name. If set to NO the members will appear in
404# declaration order.
405
406SORT_MEMBER_DOCS = YES
407
408# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
409# brief documentation of file, namespace and class members alphabetically
410# by member name. If set to NO (the default) the members will appear in
411# declaration order.
412
413SORT_BRIEF_DOCS = NO
414
415# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
416# will sort the (brief and detailed) documentation of class members so that
417# constructors and destructors are listed first. If set to NO (the default)
418# the constructors will appear in the respective orders defined by
419# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
420# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
421# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
422
423SORT_MEMBERS_CTORS_1ST = NO
424
425# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
426# hierarchy of group names into alphabetical order. If set to NO (the default)
427# the group names will appear in their defined order.
428
429SORT_GROUP_NAMES = NO
430
431# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
432# sorted by fully-qualified names, including namespaces. If set to
433# NO (the default), the class list will be sorted only by class name,
434# not including the namespace part.
435# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
436# Note: This option applies only to the class list, not to the
437# alphabetical list.
438
439SORT_BY_SCOPE_NAME = NO
440
441# The GENERATE_TODOLIST tag can be used to enable (YES) or
442# disable (NO) the todo list. This list is created by putting \todo
443# commands in the documentation.
444
445GENERATE_TODOLIST = YES
446
447# The GENERATE_TESTLIST tag can be used to enable (YES) or
448# disable (NO) the test list. This list is created by putting \test
449# commands in the documentation.
450
451GENERATE_TESTLIST = YES
452
453# The GENERATE_BUGLIST tag can be used to enable (YES) or
454# disable (NO) the bug list. This list is created by putting \bug
455# commands in the documentation.
456
457GENERATE_BUGLIST = YES
458
459# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
460# disable (NO) the deprecated list. This list is created by putting
461# \deprecated commands in the documentation.
462
463GENERATE_DEPRECATEDLIST= YES
464
465# The ENABLED_SECTIONS tag can be used to enable conditional
466# documentation sections, marked by \if sectionname ... \endif.
467
468ENABLED_SECTIONS =
469
470# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
471# the initial value of a variable or define consists of for it to appear in
472# the documentation. If the initializer consists of more lines than specified
473# here it will be hidden. Use a value of 0 to hide initializers completely.
474# The appearance of the initializer of individual variables and defines in the
475# documentation can be controlled using \showinitializer or \hideinitializer
476# command in the documentation regardless of this setting.
477
478MAX_INITIALIZER_LINES = 30
479
480# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
481# at the bottom of the documentation of classes and structs. If set to YES the
482# list will mention the files that were used to generate the documentation.
483
484SHOW_USED_FILES = YES
485
486# If the sources in your project are distributed over multiple directories
487# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
488# in the documentation. The default is NO.
489
490SHOW_DIRECTORIES = NO
491
492# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
493# This will remove the Files entry from the Quick Index and from the
494# Folder Tree View (if specified). The default is YES.
495
496SHOW_FILES = YES
497
498# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
499# Namespaces page. This will remove the Namespaces entry from the Quick Index
500# and from the Folder Tree View (if specified). The default is YES.
501
502SHOW_NAMESPACES = YES
503
504# The FILE_VERSION_FILTER tag can be used to specify a program or script that
505# doxygen should invoke to get the current version for each file (typically from
506# the version control system). Doxygen will invoke the program by executing (via
507# popen()) the command <command> <input-file>, where <command> is the value of
508# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
509# provided by doxygen. Whatever the program writes to standard output
510# is used as the file version. See the manual for examples.
511
512FILE_VERSION_FILTER =
513
514# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
515# doxygen. The layout file controls the global structure of the generated output files
516# in an output format independent way. The create the layout file that represents
517# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
518# file name after the option, if omitted DoxygenLayout.xml will be used as the name
519# of the layout file.
520
521LAYOUT_FILE =
522
523#---------------------------------------------------------------------------
524# configuration options related to warning and progress messages
525#---------------------------------------------------------------------------
526
527# The QUIET tag can be used to turn on/off the messages that are generated
528# by doxygen. Possible values are YES and NO. If left blank NO is used.
529
530QUIET = NO
531
532# The WARNINGS tag can be used to turn on/off the warning messages that are
533# generated by doxygen. Possible values are YES and NO. If left blank
534# NO is used.
535
536WARNINGS = YES
537
538# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
539# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
540# automatically be disabled.
541
542WARN_IF_UNDOCUMENTED = YES
543
544# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
545# potential errors in the documentation, such as not documenting some
546# parameters in a documented function, or documenting parameters that
547# don't exist or using markup commands wrongly.
548
549WARN_IF_DOC_ERROR = YES
550
551# This WARN_NO_PARAMDOC option can be abled to get warnings for
552# functions that are documented, but have no documentation for their parameters
553# or return value. If set to NO (the default) doxygen will only warn about
554# wrong or incomplete parameter documentation, but not about the absence of
555# documentation.
556
557WARN_NO_PARAMDOC = NO
558
559# The WARN_FORMAT tag determines the format of the warning messages that
560# doxygen can produce. The string should contain the $file, $line, and $text
561# tags, which will be replaced by the file and line number from which the
562# warning originated and the warning text. Optionally the format may contain
563# $version, which will be replaced by the version of the file (if it could
564# be obtained via FILE_VERSION_FILTER)
565
566WARN_FORMAT = "$file:$line: $text"
567
568# The WARN_LOGFILE tag can be used to specify a file to which warning
569# and error messages should be written. If left blank the output is written
570# to stderr.
571
572WARN_LOGFILE =
573
574#---------------------------------------------------------------------------
575# configuration options related to the input files
576#---------------------------------------------------------------------------
577
578# The INPUT tag can be used to specify the files and/or directories that contain
579# documented source files. You may enter file names like "myfile.cpp" or
580# directories like "/usr/src/myproject". Separate the files or directories
581# with spaces.
582
583INPUT = include
584
585# This tag can be used to specify the character encoding of the source files
586# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
587# also the default input encoding. Doxygen uses libiconv (or the iconv built
588# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
589# the list of possible encodings.
590
591INPUT_ENCODING = UTF-8
592
593# If the value of the INPUT tag contains directories, you can use the
594# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
595# and *.h) to filter out the source-files in the directories. If left
596# blank the following patterns are tested:
597# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
598# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
599
600FILE_PATTERNS =
601
602# The RECURSIVE tag can be used to turn specify whether or not subdirectories
603# should be searched for input files as well. Possible values are YES and NO.
604# If left blank NO is used.
605
606RECURSIVE = YES
607
608# The EXCLUDE tag can be used to specify files and/or directories that should
609# excluded from the INPUT source files. This way you can easily exclude a
610# subdirectory from a directory tree whose root is specified with the INPUT tag.
611
612EXCLUDE =
613
614# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
615# directories that are symbolic links (a Unix filesystem feature) are excluded
616# from the input.
617
618EXCLUDE_SYMLINKS = NO
619
620# If the value of the INPUT tag contains directories, you can use the
621# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
622# certain files from those directories. Note that the wildcards are matched
623# against the file with absolute path, so to exclude all test directories
624# for example use the pattern */test/*
625
626EXCLUDE_PATTERNS =
627
628# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
629# (namespaces, classes, functions, etc.) that should be excluded from the
630# output. The symbol name can be a fully qualified name, a word, or if the
631# wildcard * is used, a substring. Examples: ANamespace, AClass,
632# AClass::ANamespace, ANamespace::*Test
633
634EXCLUDE_SYMBOLS =
635
636# The EXAMPLE_PATH tag can be used to specify one or more files or
637# directories that contain example code fragments that are included (see
638# the \include command).
639
640EXAMPLE_PATH =
641
642# If the value of the EXAMPLE_PATH tag contains directories, you can use the
643# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
644# and *.h) to filter out the source-files in the directories. If left
645# blank all files are included.
646
647EXAMPLE_PATTERNS =
648
649# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
650# searched for input files to be used with the \include or \dontinclude
651# commands irrespective of the value of the RECURSIVE tag.
652# Possible values are YES and NO. If left blank NO is used.
653
654EXAMPLE_RECURSIVE = NO
655
656# The IMAGE_PATH tag can be used to specify one or more files or
657# directories that contain image that are included in the documentation (see
658# the \image command).
659
660IMAGE_PATH =
661
662# The INPUT_FILTER tag can be used to specify a program that doxygen should
663# invoke to filter for each input file. Doxygen will invoke the filter program
664# by executing (via popen()) the command <filter> <input-file>, where <filter>
665# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
666# input file. Doxygen will then use the output that the filter program writes
667# to standard output. If FILTER_PATTERNS is specified, this tag will be
668# ignored.
669
670INPUT_FILTER =
671
672# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
673# basis. Doxygen will compare the file name with each pattern and apply the
674# filter if there is a match. The filters are a list of the form:
675# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
676# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
677# is applied to all files.
678
679FILTER_PATTERNS =
680
681# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
682# INPUT_FILTER) will be used to filter the input files when producing source
683# files to browse (i.e. when SOURCE_BROWSER is set to YES).
684
685FILTER_SOURCE_FILES = NO
686
687#---------------------------------------------------------------------------
688# configuration options related to source browsing
689#---------------------------------------------------------------------------
690
691# If the SOURCE_BROWSER tag is set to YES then a list of source files will
692# be generated. Documented entities will be cross-referenced with these sources.
693# Note: To get rid of all source code in the generated output, make sure also
694# VERBATIM_HEADERS is set to NO.
695
696SOURCE_BROWSER = YES
697
698# Setting the INLINE_SOURCES tag to YES will include the body
699# of functions and classes directly in the documentation.
700
701INLINE_SOURCES = NO
702
703# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
704# doxygen to hide any special comment blocks from generated source code
705# fragments. Normal C and C++ comments will always remain visible.
706
707STRIP_CODE_COMMENTS = YES
708
709# If the REFERENCED_BY_RELATION tag is set to YES
710# then for each documented function all documented
711# functions referencing it will be listed.
712
713REFERENCED_BY_RELATION = NO
714
715# If the REFERENCES_RELATION tag is set to YES
716# then for each documented function all documented entities
717# called/used by that function will be listed.
718
719REFERENCES_RELATION = NO
720
721# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
722# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
723# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
724# link to the source code. Otherwise they will link to the documentation.
725
726REFERENCES_LINK_SOURCE = YES
727
728# If the USE_HTAGS tag is set to YES then the references to source code
729# will point to the HTML generated by the htags(1) tool instead of doxygen
730# built-in source browser. The htags tool is part of GNU's global source
731# tagging system (see http://www.gnu.org/software/global/global.html). You
732# will need version 4.8.6 or higher.
733
734USE_HTAGS = NO
735
736# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
737# will generate a verbatim copy of the header file for each class for
738# which an include is specified. Set to NO to disable this.
739
740VERBATIM_HEADERS = YES
741
742#---------------------------------------------------------------------------
743# configuration options related to the alphabetical class index
744#---------------------------------------------------------------------------
745
746# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
747# of all compounds will be generated. Enable this if the project
748# contains a lot of classes, structs, unions or interfaces.
749
750ALPHABETICAL_INDEX = YES
751
752# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
753# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
754# in which this list will be split (can be a number in the range [1..20])
755
756COLS_IN_ALPHA_INDEX = 5
757
758# In case all classes in a project start with a common prefix, all
759# classes will be put under the same header in the alphabetical index.
760# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
761# should be ignored while generating the index headers.
762
763IGNORE_PREFIX =
764
765#---------------------------------------------------------------------------
766# configuration options related to the HTML output
767#---------------------------------------------------------------------------
768
769# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
770# generate HTML output.
771
772GENERATE_HTML = YES
773
774# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
775# If a relative path is entered the value of OUTPUT_DIRECTORY will be
776# put in front of it. If left blank `html' will be used as the default path.
777
778HTML_OUTPUT = html
779
780# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
781# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
782# doxygen will generate files with .html extension.
783
784HTML_FILE_EXTENSION = .html
785
786# The HTML_HEADER tag can be used to specify a personal HTML header for
787# each generated HTML page. If it is left blank doxygen will generate a
788# standard header.
789
790HTML_HEADER =
791
792# The HTML_FOOTER tag can be used to specify a personal HTML footer for
793# each generated HTML page. If it is left blank doxygen will generate a
794# standard footer.
795
796HTML_FOOTER =
797
798# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
799# style sheet that is used by each HTML page. It can be used to
800# fine-tune the look of the HTML output. If the tag is left blank doxygen
801# will generate a default style sheet. Note that doxygen will try to copy
802# the style sheet file to the HTML output directory, so don't put your own
803# stylesheet in the HTML output directory as well, or it will be erased!
804
805HTML_STYLESHEET =
806
807# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
808# page will contain the date and time when the page was generated. Setting
809# this to NO can help when comparing the output of multiple runs.
810
811HTML_TIMESTAMP = YES
812
813# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
814# files or namespaces will be aligned in HTML using tables. If set to
815# NO a bullet list will be used.
816
817HTML_ALIGN_MEMBERS = YES
818
819# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
820# documentation will contain sections that can be hidden and shown after the
821# page has loaded. For this to work a browser that supports
822# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
823# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
824
825HTML_DYNAMIC_SECTIONS = NO
826
827# If the GENERATE_DOCSET tag is set to YES, additional index files
828# will be generated that can be used as input for Apple's Xcode 3
829# integrated development environment, introduced with OSX 10.5 (Leopard).
830# To create a documentation set, doxygen will generate a Makefile in the
831# HTML output directory. Running make will produce the docset in that
832# directory and running "make install" will install the docset in
833# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
834# it at startup.
835# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
836
837GENERATE_DOCSET = NO
838
839# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
840# feed. A documentation feed provides an umbrella under which multiple
841# documentation sets from a single provider (such as a company or product suite)
842# can be grouped.
843
844DOCSET_FEEDNAME = "Doxygen generated docs"
845
846# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
847# should uniquely identify the documentation set bundle. This should be a
848# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
849# will append .docset to the name.
850
851DOCSET_BUNDLE_ID = org.doxygen.Project
852
853# If the GENERATE_HTMLHELP tag is set to YES, additional index files
854# will be generated that can be used as input for tools like the
855# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
856# of the generated HTML documentation.
857
858GENERATE_HTMLHELP = NO
859
860# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
861# be used to specify the file name of the resulting .chm file. You
862# can add a path in front of the file if the result should not be
863# written to the html output directory.
864
865CHM_FILE =
866
867# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
868# be used to specify the location (absolute path including file name) of
869# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
870# the HTML help compiler on the generated index.hhp.
871
872HHC_LOCATION =
873
874# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
875# controls if a separate .chi index file is generated (YES) or that
876# it should be included in the master .chm file (NO).
877
878GENERATE_CHI = NO
879
880# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
881# is used to encode HtmlHelp index (hhk), content (hhc) and project file
882# content.
883
884CHM_INDEX_ENCODING =
885
886# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
887# controls whether a binary table of contents is generated (YES) or a
888# normal table of contents (NO) in the .chm file.
889
890BINARY_TOC = NO
891
892# The TOC_EXPAND flag can be set to YES to add extra items for group members
893# to the contents of the HTML help documentation and to the tree view.
894
895TOC_EXPAND = NO
896
897# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
898# are set, an additional index file will be generated that can be used as input for
899# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
900# HTML documentation.
901
902GENERATE_QHP = NO
903
904# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
905# be used to specify the file name of the resulting .qch file.
906# The path specified is relative to the HTML output folder.
907
908QCH_FILE =
909
910# The QHP_NAMESPACE tag specifies the namespace to use when generating
911# Qt Help Project output. For more information please see
912# http://doc.trolltech.com/qthelpproject.html#namespace
913
914QHP_NAMESPACE = org.doxygen.Project
915
916# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
917# Qt Help Project output. For more information please see
918# http://doc.trolltech.com/qthelpproject.html#virtual-folders
919
920QHP_VIRTUAL_FOLDER = doc
921
922# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
923# For more information please see
924# http://doc.trolltech.com/qthelpproject.html#custom-filters
925
926QHP_CUST_FILTER_NAME =
927
928# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
929# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
930
931QHP_CUST_FILTER_ATTRS =
932
933# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
934# filter section matches.
935# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
936
937QHP_SECT_FILTER_ATTRS =
938
939# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
940# be used to specify the location of Qt's qhelpgenerator.
941# If non-empty doxygen will try to run qhelpgenerator on the generated
942# .qhp file.
943
944QHG_LOCATION =
945
946# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
947# will be generated, which together with the HTML files, form an Eclipse help
948# plugin. To install this plugin and make it available under the help contents
949# menu in Eclipse, the contents of the directory containing the HTML and XML
950# files needs to be copied into the plugins directory of eclipse. The name of
951# the directory within the plugins directory should be the same as
952# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
953# the help appears.
954
955GENERATE_ECLIPSEHELP = NO
956
957# A unique identifier for the eclipse help plugin. When installing the plugin
958# the directory name containing the HTML and XML files should also have
959# this name.
960
961ECLIPSE_DOC_ID = org.doxygen.Project
962
963# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
964# top of each HTML page. The value NO (the default) enables the index and
965# the value YES disables it.
966
967DISABLE_INDEX = NO
968
969# This tag can be used to set the number of enum values (range [1..20])
970# that doxygen will group on one line in the generated HTML documentation.
971
972ENUM_VALUES_PER_LINE = 4
973
974# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
975# structure should be generated to display hierarchical information.
976# If the tag value is set to YES, a side panel will be generated
977# containing a tree-like index structure (just like the one that
978# is generated for HTML Help). For this to work a browser that supports
979# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
980# Windows users are probably better off using the HTML help feature.
981
982GENERATE_TREEVIEW = NO
983
984# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
985# and Class Hierarchy pages using a tree view instead of an ordered list.
986
987USE_INLINE_TREES = NO
988
989# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
990# used to set the initial width (in pixels) of the frame in which the tree
991# is shown.
992
993TREEVIEW_WIDTH = 250
994
995# Use this tag to change the font size of Latex formulas included
996# as images in the HTML documentation. The default is 10. Note that
997# when you change the font size after a successful doxygen run you need
998# to manually remove any form_*.png images from the HTML output directory
999# to force them to be regenerated.
1000
1001FORMULA_FONTSIZE = 10
1002
1003# When the SEARCHENGINE tag is enabled doxygen will generate a search box
1004# for the HTML output. The underlying search engine uses javascript
1005# and DHTML and should work on any modern browser. Note that when using
1006# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1007# (GENERATE_DOCSET) there is already a search function so this one should
1008# typically be disabled. For large projects the javascript based search engine
1009# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1010
1011SEARCHENGINE = NO
1012
1013# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1014# implemented using a PHP enabled web server instead of at the web client
1015# using Javascript. Doxygen will generate the search PHP script and index
1016# file to put on the web server. The advantage of the server
1017# based approach is that it scales better to large projects and allows
1018# full text search. The disadvances is that it is more difficult to setup
1019# and does not have live searching capabilities.
1020
1021SERVER_BASED_SEARCH = NO
1022
1023#---------------------------------------------------------------------------
1024# configuration options related to the LaTeX output
1025#---------------------------------------------------------------------------
1026
1027# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1028# generate Latex output.
1029
1030GENERATE_LATEX = NO
1031
1032# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1033# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1034# put in front of it. If left blank `latex' will be used as the default path.
1035
1036LATEX_OUTPUT = latex
1037
1038# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1039# invoked. If left blank `latex' will be used as the default command name.
1040# Note that when enabling USE_PDFLATEX this option is only used for
1041# generating bitmaps for formulas in the HTML output, but not in the
1042# Makefile that is written to the output directory.
1043
1044LATEX_CMD_NAME = latex
1045
1046# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1047# generate index for LaTeX. If left blank `makeindex' will be used as the
1048# default command name.
1049
1050MAKEINDEX_CMD_NAME = makeindex
1051
1052# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1053# LaTeX documents. This may be useful for small projects and may help to
1054# save some trees in general.
1055
1056COMPACT_LATEX = NO
1057
1058# The PAPER_TYPE tag can be used to set the paper type that is used
1059# by the printer. Possible values are: a4, a4wide, letter, legal and
1060# executive. If left blank a4wide will be used.
1061
1062PAPER_TYPE = a4
1063
1064# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1065# packages that should be included in the LaTeX output.
1066
1067EXTRA_PACKAGES =
1068
1069# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1070# the generated latex document. The header should contain everything until
1071# the first chapter. If it is left blank doxygen will generate a
1072# standard header. Notice: only use this tag if you know what you are doing!
1073
1074LATEX_HEADER =
1075
1076# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1077# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1078# contain links (just like the HTML output) instead of page references
1079# This makes the output suitable for online browsing using a pdf viewer.
1080
1081PDF_HYPERLINKS = YES
1082
1083# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1084# plain latex in the generated Makefile. Set this option to YES to get a
1085# higher quality PDF documentation.
1086
1087USE_PDFLATEX = YES
1088
1089# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1090# command to the generated LaTeX files. This will instruct LaTeX to keep
1091# running if errors occur, instead of asking the user for help.
1092# This option is also used when generating formulas in HTML.
1093
1094LATEX_BATCHMODE = NO
1095
1096# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1097# include the index chapters (such as File Index, Compound Index, etc.)
1098# in the output.
1099
1100LATEX_HIDE_INDICES = NO
1101
1102# If LATEX_SOURCE_CODE is set to YES then doxygen will include
1103# source code with syntax highlighting in the LaTeX output.
1104# Note that which sources are shown also depends on other settings
1105# such as SOURCE_BROWSER.
1106
1107LATEX_SOURCE_CODE = NO
1108
1109#---------------------------------------------------------------------------
1110# configuration options related to the RTF output
1111#---------------------------------------------------------------------------
1112
1113# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1114# The RTF output is optimized for Word 97 and may not look very pretty with
1115# other RTF readers or editors.
1116
1117GENERATE_RTF = NO
1118
1119# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1120# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1121# put in front of it. If left blank `rtf' will be used as the default path.
1122
1123RTF_OUTPUT = rtf
1124
1125# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1126# RTF documents. This may be useful for small projects and may help to
1127# save some trees in general.
1128
1129COMPACT_RTF = NO
1130
1131# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1132# will contain hyperlink fields. The RTF file will
1133# contain links (just like the HTML output) instead of page references.
1134# This makes the output suitable for online browsing using WORD or other
1135# programs which support those fields.
1136# Note: wordpad (write) and others do not support links.
1137
1138RTF_HYPERLINKS = NO
1139
1140# Load stylesheet definitions from file. Syntax is similar to doxygen's
1141# config file, i.e. a series of assignments. You only have to provide
1142# replacements, missing definitions are set to their default value.
1143
1144RTF_STYLESHEET_FILE =
1145
1146# Set optional variables used in the generation of an rtf document.
1147# Syntax is similar to doxygen's config file.
1148
1149RTF_EXTENSIONS_FILE =
1150
1151#---------------------------------------------------------------------------
1152# configuration options related to the man page output
1153#---------------------------------------------------------------------------
1154
1155# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1156# generate man pages
1157
1158GENERATE_MAN = NO
1159
1160# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1161# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1162# put in front of it. If left blank `man' will be used as the default path.
1163
1164MAN_OUTPUT = man
1165
1166# The MAN_EXTENSION tag determines the extension that is added to
1167# the generated man pages (default is the subroutine's section .3)
1168
1169MAN_EXTENSION = .3
1170
1171# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1172# then it will generate one additional man file for each entity
1173# documented in the real man page(s). These additional files
1174# only source the real man page, but without them the man command
1175# would be unable to find the correct page. The default is NO.
1176
1177MAN_LINKS = NO
1178
1179#---------------------------------------------------------------------------
1180# configuration options related to the XML output
1181#---------------------------------------------------------------------------
1182
1183# If the GENERATE_XML tag is set to YES Doxygen will
1184# generate an XML file that captures the structure of
1185# the code including all documentation.
1186
1187GENERATE_XML = NO
1188
1189# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1190# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1191# put in front of it. If left blank `xml' will be used as the default path.
1192
1193XML_OUTPUT = xml
1194
1195# The XML_SCHEMA tag can be used to specify an XML schema,
1196# which can be used by a validating XML parser to check the
1197# syntax of the XML files.
1198
1199XML_SCHEMA =
1200
1201# The XML_DTD tag can be used to specify an XML DTD,
1202# which can be used by a validating XML parser to check the
1203# syntax of the XML files.
1204
1205XML_DTD =
1206
1207# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1208# dump the program listings (including syntax highlighting
1209# and cross-referencing information) to the XML output. Note that
1210# enabling this will significantly increase the size of the XML output.
1211
1212XML_PROGRAMLISTING = YES
1213
1214#---------------------------------------------------------------------------
1215# configuration options for the AutoGen Definitions output
1216#---------------------------------------------------------------------------
1217
1218# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1219# generate an AutoGen Definitions (see autogen.sf.net) file
1220# that captures the structure of the code including all
1221# documentation. Note that this feature is still experimental
1222# and incomplete at the moment.
1223
1224GENERATE_AUTOGEN_DEF = NO
1225
1226#---------------------------------------------------------------------------
1227# configuration options related to the Perl module output
1228#---------------------------------------------------------------------------
1229
1230# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1231# generate a Perl module file that captures the structure of
1232# the code including all documentation. Note that this
1233# feature is still experimental and incomplete at the
1234# moment.
1235
1236GENERATE_PERLMOD = NO
1237
1238# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1239# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1240# to generate PDF and DVI output from the Perl module output.
1241
1242PERLMOD_LATEX = NO
1243
1244# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1245# nicely formatted so it can be parsed by a human reader. This is useful
1246# if you want to understand what is going on. On the other hand, if this
1247# tag is set to NO the size of the Perl module output will be much smaller
1248# and Perl will parse it just the same.
1249
1250PERLMOD_PRETTY = YES
1251
1252# The names of the make variables in the generated doxyrules.make file
1253# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1254# This is useful so different doxyrules.make files included by the same
1255# Makefile don't overwrite each other's variables.
1256
1257PERLMOD_MAKEVAR_PREFIX =
1258
1259#---------------------------------------------------------------------------
1260# Configuration options related to the preprocessor
1261#---------------------------------------------------------------------------
1262
1263# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1264# evaluate all C-preprocessor directives found in the sources and include
1265# files.
1266
1267ENABLE_PREPROCESSING = YES
1268
1269# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1270# names in the source code. If set to NO (the default) only conditional
1271# compilation will be performed. Macro expansion can be done in a controlled
1272# way by setting EXPAND_ONLY_PREDEF to YES.
1273
1274MACRO_EXPANSION = YES
1275
1276# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1277# then the macro expansion is limited to the macros specified with the
1278# PREDEFINED and EXPAND_AS_DEFINED tags.
1279
1280EXPAND_ONLY_PREDEF = NO
1281
1282# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1283# in the INCLUDE_PATH (see below) will be search if a #include is found.
1284
1285SEARCH_INCLUDES = YES
1286
1287# The INCLUDE_PATH tag can be used to specify one or more directories that
1288# contain include files that are not input files but should be processed by
1289# the preprocessor.
1290
1291INCLUDE_PATH =
1292
1293# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1294# patterns (like *.h and *.hpp) to filter out the header-files in the
1295# directories. If left blank, the patterns specified with FILE_PATTERNS will
1296# be used.
1297
1298INCLUDE_FILE_PATTERNS =
1299
1300# The PREDEFINED tag can be used to specify one or more macro names that
1301# are defined before the preprocessor is started (similar to the -D option of
1302# gcc). The argument of the tag is a list of macros of the form: name
1303# or name=definition (no spaces). If the definition and the = are
1304# omitted =1 is assumed. To prevent a macro definition from being
1305# undefined via #undef or recursively expanded use the := operator
1306# instead of the = operator.
1307
1308PREDEFINED = __cplusplus
1309
1310# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1311# this tag can be used to specify a list of macro names that should be expanded.
1312# The macro definition that is found in the sources will be used.
1313# Use the PREDEFINED tag if you want to use a different macro definition.
1314
1315EXPAND_AS_DEFINED =
1316
1317# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1318# doxygen's preprocessor will remove all function-like macros that are alone
1319# on a line, have an all uppercase name, and do not end with a semicolon. Such
1320# function macros are typically used for boiler-plate code, and will confuse
1321# the parser if not removed.
1322
1323SKIP_FUNCTION_MACROS = YES
1324
1325#---------------------------------------------------------------------------
1326# Configuration::additions related to external references
1327#---------------------------------------------------------------------------
1328
1329# The TAGFILES option can be used to specify one or more tagfiles.
1330# Optionally an initial location of the external documentation
1331# can be added for each tagfile. The format of a tag file without
1332# this location is as follows:
1333# TAGFILES = file1 file2 ...
1334# Adding location for the tag files is done as follows:
1335# TAGFILES = file1=loc1 "file2 = loc2" ...
1336# where "loc1" and "loc2" can be relative or absolute paths or
1337# URLs. If a location is present for each tag, the installdox tool
1338# does not have to be run to correct the links.
1339# Note that each tag file must have a unique name
1340# (where the name does NOT include the path)
1341# If a tag file is not located in the directory in which doxygen
1342# is run, you must also specify the path to the tagfile here.
1343
1344TAGFILES =
1345
1346# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1347# a tag file that is based on the input files it reads.
1348
1349GENERATE_TAGFILE =
1350
1351# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1352# in the class index. If set to NO only the inherited external classes
1353# will be listed.
1354
1355ALLEXTERNALS = NO
1356
1357# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1358# in the modules index. If set to NO, only the current project's groups will
1359# be listed.
1360
1361EXTERNAL_GROUPS = YES
1362
1363# The PERL_PATH should be the absolute path and name of the perl script
1364# interpreter (i.e. the result of `which perl').
1365
1366PERL_PATH = /usr/bin/perl
1367
1368#---------------------------------------------------------------------------
1369# Configuration options related to the dot tool
1370#---------------------------------------------------------------------------
1371
1372# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1373# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1374# or super classes. Setting the tag to NO turns the diagrams off. Note that
1375# this option is superseded by the HAVE_DOT option below. This is only a
1376# fallback. It is recommended to install and use dot, since it yields more
1377# powerful graphs.
1378
1379CLASS_DIAGRAMS = NO
1380
1381# You can define message sequence charts within doxygen comments using the \msc
1382# command. Doxygen will then run the mscgen tool (see
1383# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1384# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1385# the mscgen tool resides. If left empty the tool is assumed to be found in the
1386# default search path.
1387
1388MSCGEN_PATH =
1389
1390# If set to YES, the inheritance and collaboration graphs will hide
1391# inheritance and usage relations if the target is undocumented
1392# or is not a class.
1393
1394HIDE_UNDOC_RELATIONS = YES
1395
1396# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1397# available from the path. This tool is part of Graphviz, a graph visualization
1398# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1399# have no effect if this option is set to NO (the default)
1400
1401HAVE_DOT = NO
1402
1403# By default doxygen will write a font called FreeSans.ttf to the output
1404# directory and reference it in all dot files that doxygen generates. This
1405# font does not include all possible unicode characters however, so when you need
1406# these (or just want a differently looking font) you can specify the font name
1407# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
1408# which can be done by putting it in a standard location or by setting the
1409# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1410# containing the font.
1411
1412DOT_FONTNAME = Helvetica
1413
1414# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1415# The default size is 10pt.
1416
1417DOT_FONTSIZE = 10
1418
1419# By default doxygen will tell dot to use the output directory to look for the
1420# FreeSans.ttf font (which doxygen will put there itself). If you specify a
1421# different font using DOT_FONTNAME you can set the path where dot
1422# can find it using this tag.
1423
1424DOT_FONTPATH =
1425
1426# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1427# will generate a graph for each documented class showing the direct and
1428# indirect inheritance relations. Setting this tag to YES will force the
1429# the CLASS_DIAGRAMS tag to NO.
1430
1431CLASS_GRAPH = YES
1432
1433# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1434# will generate a graph for each documented class showing the direct and
1435# indirect implementation dependencies (inheritance, containment, and
1436# class references variables) of the class with other documented classes.
1437
1438COLLABORATION_GRAPH = NO
1439
1440# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1441# will generate a graph for groups, showing the direct groups dependencies
1442
1443GROUP_GRAPHS = YES
1444
1445# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1446# collaboration diagrams in a style similar to the OMG's Unified Modeling
1447# Language.
1448
1449UML_LOOK = NO
1450
1451# If set to YES, the inheritance and collaboration graphs will show the
1452# relations between templates and their instances.
1453
1454TEMPLATE_RELATIONS = NO
1455
1456# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1457# tags are set to YES then doxygen will generate a graph for each documented
1458# file showing the direct and indirect include dependencies of the file with
1459# other documented files.
1460
1461INCLUDE_GRAPH = YES
1462
1463# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1464# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1465# documented header file showing the documented files that directly or
1466# indirectly include this file.
1467
1468INCLUDED_BY_GRAPH = YES
1469
1470# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1471# doxygen will generate a call dependency graph for every global function
1472# or class method. Note that enabling this option will significantly increase
1473# the time of a run. So in most cases it will be better to enable call graphs
1474# for selected functions only using the \callgraph command.
1475
1476CALL_GRAPH = NO
1477
1478# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1479# doxygen will generate a caller dependency graph for every global function
1480# or class method. Note that enabling this option will significantly increase
1481# the time of a run. So in most cases it will be better to enable caller
1482# graphs for selected functions only using the \callergraph command.
1483
1484CALLER_GRAPH = NO
1485
1486# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1487# will graphical hierarchy of all classes instead of a textual one.
1488
1489GRAPHICAL_HIERARCHY = YES
1490
1491# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1492# then doxygen will show the dependencies a directory has on other directories
1493# in a graphical way. The dependency relations are determined by the #include
1494# relations between the files in the directories.
1495
1496DIRECTORY_GRAPH = YES
1497
1498# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1499# generated by dot. Possible values are png, jpg, or gif
1500# If left blank png will be used.
1501
1502DOT_IMAGE_FORMAT = png
1503
1504# The tag DOT_PATH can be used to specify the path where the dot tool can be
1505# found. If left blank, it is assumed the dot tool can be found in the path.
1506
1507DOT_PATH =
1508
1509# The DOTFILE_DIRS tag can be used to specify one or more directories that
1510# contain dot files that are included in the documentation (see the
1511# \dotfile command).
1512
1513DOTFILE_DIRS =
1514
1515# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1516# nodes that will be shown in the graph. If the number of nodes in a graph
1517# becomes larger than this value, doxygen will truncate the graph, which is
1518# visualized by representing a node as a red box. Note that doxygen if the
1519# number of direct children of the root node in a graph is already larger than
1520# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1521# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1522
1523DOT_GRAPH_MAX_NODES = 50
1524
1525# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1526# graphs generated by dot. A depth value of 3 means that only nodes reachable
1527# from the root by following a path via at most 3 edges will be shown. Nodes
1528# that lay further from the root node will be omitted. Note that setting this
1529# option to 1 or 2 may greatly reduce the computation time needed for large
1530# code bases. Also note that the size of a graph can be further restricted by
1531# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1532
1533MAX_DOT_GRAPH_DEPTH = 0
1534
1535# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1536# background. This is disabled by default, because dot on Windows does not
1537# seem to support this out of the box. Warning: Depending on the platform used,
1538# enabling this option may lead to badly anti-aliased labels on the edges of
1539# a graph (i.e. they become hard to read).
1540
1541DOT_TRANSPARENT = NO
1542
1543# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1544# files in one run (i.e. multiple -o and -T options on the command line). This
1545# makes dot run faster, but since only newer versions of dot (>1.8.10)
1546# support this, this feature is disabled by default.
1547
1548DOT_MULTI_TARGETS = YES
1549
1550# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1551# generate a legend page explaining the meaning of the various boxes and
1552# arrows in the dot generated graphs.
1553
1554GENERATE_LEGEND = YES
1555
1556# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1557# remove the intermediate dot files that are used to generate
1558# the various graphs.
1559
1560DOT_CLEANUP = YES