| 1 | libcec (1.4-3) unstable; urgency=low |
| 2 | |
| 3 | * fixed: |
| 4 | * try to ping the device and grab the firmware version until the connect |
| 5 | timeout runs out. fixes failed reconnect after standby, when the adapter |
| 6 | is still being initialised |
| 7 | |
| 8 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 27 Jan 2012 13:05:00 +0100 |
| 9 | |
| 10 | libcec (1.4-2) unstable; urgency=low |
| 11 | |
| 12 | * changed/added: |
| 13 | * added a firmware flash script for linux. |
| 14 | usage: ./support/cec-flash-device.sh /path/to/firware.hex |
| 15 | * refactored threading/locking - added windows native instead of |
| 16 | pthread-win32, so we can compile native x64 too |
| 17 | * check whether the adapter responds when connecting to it and report the |
| 18 | firmware version of the adapter after connecting |
| 19 | * moved create-installer.cmd to support/ |
| 20 | * completely removed AM_SILENT_RULES |
| 21 | * interface changes: |
| 22 | * compile LibCecSharp against .NET framework 2.0 and sign the assembly |
| 23 | * fixed: |
| 24 | * only the key release events were sent, not keypresses, which appeared in |
| 25 | clients as laggy keypresses |
| 26 | * fixed reconnect after standby |
| 27 | * wait for active tranmission to finish when opening a connection to the |
| 28 | adapter. fixes initialisation errors |
| 29 | * set the default transmit timeout properly instead of using 0 |
| 30 | * fixed possible deadlock because of a negative timeout in |
| 31 | CAdapterCommunication::WaitForTransmitSucceeded() |
| 32 | * fixed error message in cec-client (unable to open the device on port ...) |
| 33 | * exit cec-client after entering bootloader mode |
| 34 | * MSGCODE_START_BOOTLOADER doesn't respond with MSGCODE_COMMAND_ACCEPTED |
| 35 | |
| 36 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 25 Jan 2012 23:28:00 +0100 |
| 37 | |
| 38 | libcec (1.4-1) unstable; urgency=low |
| 39 | |
| 40 | * changed/added: |
| 41 | * added the vendor id for Sony |
| 42 | * always refresh the power state of a device when it hasn't been updated |
| 43 | for 30 seconds |
| 44 | * do silent builds by default |
| 45 | * interface changes: |
| 46 | * added optional callback methods to libCEC. enable them by calling |
| 47 | EnableCallbacks(ICECCallbacks *callbacks) / |
| 48 | cec_enable_callbacks(ICECCallbacks *callbacks). after this method is |
| 49 | called, the GetNext...() methods will not return any data |
| 50 | * added the same callbacks to LibCecSharp. implement CecCallbackMethods |
| 51 | and override the methods in there |
| 52 | * fixed: |
| 53 | * use the given timeout when trying to open a connection to the CEC |
| 54 | adapter |
| 55 | * resolved difference between method name in LibCECC.cpp and cecc.h. |
| 56 | credits: Doug Johnson |
| 57 | * don't transmit physical addresses while holding a lock in CCECProcessor |
| 58 | * don't hold a lock when sending an active source message. |
| 59 | * unload libCEC when the lib version is invalid |
| 60 | * "unused" warnings suppressed |
| 61 | |
| 62 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 12 Jan 2012 19:06:00 +0100 |
| 63 | |
| 64 | libcec (1.3-3) unstable; urgency=low |
| 65 | |
| 66 | * changed/added: |
| 67 | * place in libudev include in an extern C block. fixes compilations on |
| 68 | older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann |
| 69 | * added pkg-config to the dependencies list. issue #15 |
| 70 | * updated README. closes #14 |
| 71 | * added a script that tests some basic functions of the CEC adapter: |
| 72 | /support/cec-test-device.sh |
| 73 | * fixed: |
| 74 | * don't make libCEC the active source when changing the physical address. |
| 75 | don't send active source messages on startup, when not the active source |
| 76 | fixes unwanted device power ups |
| 77 | * replace the command handler directly after receiving a changed vendor |
| 78 | id. change the primary type from recording device to playback device |
| 79 | for panasonic TVs |
| 80 | * don't send a deck status update when sending an active source message |
| 81 | for panasonic TVs |
| 82 | * only switch handlers once when using the generic handler |
| 83 | * don't switch handlers when not needed |
| 84 | * hold a lock in CCECProcessor::SetHDMIPort() |
| 85 | * don't send deck status updates when sending an active source message by |
| 86 | default |
| 87 | |
| 88 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 3 Jan 2012 22:48:00 +0100 |
| 89 | |
| 90 | libcec (1.3-2) unstable; urgency=low |
| 91 | |
| 92 | * changed/added: |
| 93 | * copy libcec.dll to the XBMC installation dir when XBMC is found |
| 94 | * disable background polling. let the client request this info when needed |
| 95 | * update the power status of a device when it's set to |
| 96 | CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON |
| 97 | * wait for the correct response when requesting something, not just any |
| 98 | response |
| 99 | * don't keep trying the same command/request after receiving a feature |
| 100 | abort message |
| 101 | * interface changes: |
| 102 | * change the previously unused boolean parameter in volume control methods |
| 103 | to bSendRelease, and only send a key release when it's true. default to |
| 104 | true |
| 105 | * fixed: |
| 106 | * don't send the power up/down keypress to listeners when in the initial |
| 107 | device state (powered off). fixes unexpected shutdown in XBMC when |
| 108 | connecting to the CEC adapter. |
| 109 | * send a 'menu state activated' command when starting up. bugzid: 113 |
| 110 | * don't wait for a response when not needed |
| 111 | * don't hold a lock while waiting for a response. fixes failed libCEC |
| 112 | inits and slow responses |
| 113 | * don't replace a command handler when it's being used. fixes possible |
| 114 | crash on startup |
| 115 | * don't try to do anything before the processor thread has started |
| 116 | * don't transmit active source messages when the physical address is |
| 117 | still 0xFFFF |
| 118 | * don't init the default handler before the physical address is known |
| 119 | |
| 120 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 29 Dec 2011 03:05:00 +0100 |
| 121 | |
| 122 | libcec (1.3-1) unstable; urgency=low |
| 123 | |
| 124 | * changed/added: |
| 125 | * make libudev optional. if libudev is not available on linux, adapter |
| 126 | autodetection will also not be available. fixes compilation on Hardy/ATV1 |
| 127 | * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET |
| 128 | language |
| 129 | * added vendor support for LG |
| 130 | * added vendor support for Philips |
| 131 | * added vendor support for Yamaha |
| 132 | * added vendor support for Onkyo |
| 133 | * added 'scan' command to cec-client, that displays info about devices on |
| 134 | the bus. made all ToString() methods available on the interface. |
| 135 | * added '-s' or '--single-command' to cec-client. starting cec-client with |
| 136 | this parameter executes a single command in cec-client and does not power |
| 137 | on devices on startup and power them off on exit. this way, you can use |
| 138 | cec-client in a shell script. since there's some handshaking involved at |
| 139 | startup, this is not very fast. to execute a command and only display the |
| 140 | result and any error/warning, execute it with |
| 141 | RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch |
| 142 | files are a bit different) |
| 143 | * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to |
| 144 | cec-client's parameters |
| 145 | * handle image view on and text view on |
| 146 | * handle routing information and report physical address opcodes |
| 147 | * handle audio status updates |
| 148 | * send ping and bootloader commands via the output queue |
| 149 | * scan the CEC bus for devices when starting libcec |
| 150 | * pass all commands that are directed at libcec to listeners |
| 151 | * interface changes: |
| 152 | * added GetActiveSource()/cec_get_active_source() |
| 153 | * added IsActiveSource()/cec_is_active_source() |
| 154 | * added GetDevicePhysicalAddress()/cec_get_device_physical_address() |
| 155 | * added GetDeviceOSDName()/cec_get_osd_name() |
| 156 | * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/ |
| 157 | cec_send_key_release() |
| 158 | * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(), |
| 159 | MuteAudio()/cec_mute_audio() |
| 160 | * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/ |
| 161 | cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type(). |
| 162 | * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load |
| 163 | and when a device with the same physical address is detected, libcec will |
| 164 | use the selected hdmi port on that device. should fix source selection on |
| 165 | other devices, like an amplifier |
| 166 | * added a hook in libcec for physical address autodetection |
| 167 | * fixed: |
| 168 | * don't request the physical address from the tv (it's always 0x0000) |
| 169 | * set the proper ackmask before doing anything else |
| 170 | * don't unlock the transmit mutex in CCECProcessor while waiting for an |
| 171 | answer |
| 172 | * fix device polling |
| 173 | * refactor CEC read/write. keep a single lock for all writes, not one per |
| 174 | device |
| 175 | * ignore other data while waiting for a response |
| 176 | * retry failed tranmissions |
| 177 | * don't delete a message before it's been sent when starting the bootloader |
| 178 | * or when sending a ping |
| 179 | * fixed possible segfault when switching the command handler after a vendor |
| 180 | * id changed |
| 181 | * handle audio opcodes correctly |
| 182 | * inactive source should be directly addressed at the TV |
| 183 | * don't report a changed physical address when it hasn't changed |
| 184 | * routing information sets the stream path, not the physical address |
| 185 | * don't scan the whole bus in CCECProcessor::IsActiveDeviceType() |
| 186 | * don't request the vendor id from devices that are handled by libcec |
| 187 | * mark device status as present when a command was received from a device |
| 188 | * always send a power on command in CCECBusDevice::PowerOn() |
| 189 | * don't request updates statusses unless needed |
| 190 | * report physical address sends 3 parameters, not 2. check whether the |
| 191 | device type is correct |
| 192 | * devices can send vendor commands from other vendors, so don't assume the |
| 193 | device is of a certain vendor when it sends commands with a vendor id |
| 194 | * thread safety fixes. bugzid: 19 |
| 195 | * clear any previous input when opening a connection to the adapter. |
| 196 | bugzid: 54 |
| 197 | * use the correct source address in CSLCommandHandler::HandleVendorCommand() |
| 198 | * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5 |
| 199 | * renamed enum methods. fixes potential macro collision with isset(). |
| 200 | thanks davilla |
| 201 | * don't change the active device when receiving stream path changed |
| 202 | messages. fixes wrong source selection when powering after the TV. |
| 203 | |
| 204 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 09 Dec 2011 12:16:00 +0100 |
| 205 | |
| 206 | libcec (1.2-1) unstable; urgency=low |
| 207 | |
| 208 | * bugfixes: |
| 209 | * pass the deck_control command to libcec listeners |
| 210 | * check whether the initiator is valid in CCECProcessor::ParseCommand(). |
| 211 | fixes possible segfault when parsing invalid data |
| 212 | |
| 213 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 12 Nov 2011 13:36:00 +0100 |
| 214 | |
| 215 | libcec (1.1-3) unstable; urgency=low |
| 216 | |
| 217 | * fixed return value in CCECProcessor::SetStreamPath(), which prevented |
| 218 | active source and menu state from being sent |
| 219 | |
| 220 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 23:36:00 +0100 |
| 221 | |
| 222 | libcec (1.1-2) unstable; urgency=low |
| 223 | |
| 224 | * forgot to update the headers to v1.1 |
| 225 | |
| 226 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 18:56:00 +0100 |
| 227 | |
| 228 | libcec (1.1-1) unstable; urgency=low |
| 229 | |
| 230 | * interface changes: |
| 231 | * added logical address autodetection and let libcec handle multiple types |
| 232 | simultaniously. for logical address autodetection, you have to use |
| 233 | CECInit()/cec_init_typed() instead of CECCreate()/cec_init() |
| 234 | * added SetActiveSource()/cec_set_active_source() to the interface. |
| 235 | deprecated SetActiveView()/cec_set_active_view() |
| 236 | * added SetMenuState() |
| 237 | * added PollDevice()/cec_poll_device() |
| 238 | * removed duplicate method SetActiveSource() / SetActiveView() |
| 239 | * added SetDeckControlMode() and SetDeckInfo() |
| 240 | * fixed: |
| 241 | * added vendor detection for panasonic and broadcast active view and set |
| 242 | menu state when a panasonic device sets the stream path. thanks for the |
| 243 | pointer cptcoconut. |
| 244 | * added vendor code for pioneer |
| 245 | * osd string is 13 chars max. don't send more |
| 246 | * send the correct cec version for each device |
| 247 | * switch to panasonic specific cec implementation if a panasonic device was |
| 248 | detected |
| 249 | * send the correct device type in TransmitPhysicalAddress() |
| 250 | * send a reply from the correct device when the stream path is requested |
| 251 | * opcode 0x80 means the stream path changed, not the physical address |
| 252 | * don't poll for a vendor ID in monitoring mode |
| 253 | * fixed parameter parsing in SetVendorId() |
| 254 | * buffer up commands that are received while waiting for an ack. only send |
| 255 | 'active source' message for the actual active source |
| 256 | * win32: prepend the com port path with '\\.\', so com ports > 9 can be |
| 257 | accessed. thanks smolesen |
| 258 | * audio systems cannot be an active source, so don't transmit active |
| 259 | source message from this device |
| 260 | * only send 'active source' when powered on |
| 261 | * only set the osd name for the primary device. use default values for |
| 262 | others |
| 263 | * increase physical address with 0x100 per device |
| 264 | * win32: removed unneeded afxres.h include in the resource files, which |
| 265 | is not present when using studio express. thanks Ghuron |
| 266 | * fixed C headers |
| 267 | * mark the active source as active and other devices as inactive |
| 268 | * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER |
| 269 | * transmit the menu state as (active) when the stream path is set |
| 270 | * changed: |
| 271 | * changed copyright of boblight files with permission of the original |
| 272 | author |
| 273 | * partial handling of audio related opcodes |
| 274 | * more consistent log messages |
| 275 | * set a device type and name for each CCECBusDevice |
| 276 | * keep a power and menu state per device |
| 277 | * renamed all Broadcast...() and Report...() methods to Transmit...() |
| 278 | * renamed SetOSDString() to TransmitOSDString() |
| 279 | * changed debug level of 'did not receive ack' from error to debug |
| 280 | * only set the power status to 'on' for the primary device |
| 281 | * moved method decriptions from cecc.h to cec.h |
| 282 | * only send a power on command when a device isn't on already and set |
| 283 | the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while |
| 284 | powering on |
| 285 | * handle CEC_OPCODE_STANDBY |
| 286 | * handle CEC_OPCODE_ACTIVE_SOURCE |
| 287 | * always start in standby mode and let the tv (or other device) send the |
| 288 | power on command |
| 289 | * renamed the last few enums |
| 290 | * handle deck related opcodes. |
| 291 | * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown' |
| 292 | |
| 293 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 17:42:00 +0100 |
| 294 | |
| 295 | libcec (1.0-1) unstable; urgency=low |
| 296 | |
| 297 | * interface changes: |
| 298 | * set lib interface version back to 1.0 and rename GetLibVersion() to |
| 299 | GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion() |
| 300 | * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor |
| 301 | version number to 1 |
| 302 | * fixed: |
| 303 | * samsung's vendor specific remote keypresses don't send key releases. added |
| 304 | call to AddKey() directly after the keypress |
| 305 | * always reset the button press time in CLibCEC::AddKey() |
| 306 | * always wait for a signal in CCECProcessor::Transmit() |
| 307 | * changed: |
| 308 | * drop shared_ptr and use a normal pointer. removed boost dependency |
| 309 | |
| 310 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 04 Nov 2011 00:14:00 +0100 |
| 311 | |
| 312 | libcec (0.8-2) unstable; urgency=low |
| 313 | |
| 314 | * added 'libboost-dev' to build deps |
| 315 | |
| 316 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 23:31:00 +0100 |
| 317 | |
| 318 | libcec (0.8-1) unstable; urgency=low |
| 319 | |
| 320 | * interface changes: |
| 321 | * added GetDevicePowerStatus()/cec_get_device_power_status() |
| 322 | * added GetDeviceVendorId()/cec_get_device_vendor_id() |
| 323 | * added GetDeviceMenuLanguage()/cec_get_device_menu_language() |
| 324 | * added GetDeviceCecVersion()/cec_get_device_cec_version() |
| 325 | * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when |
| 326 | monitoring is enabled, the device will only log the data it received, |
| 327 | but will not respond to any message |
| 328 | * removed timeout parameter in Transmit() and included the ack timeout in |
| 329 | the cec_command struct |
| 330 | * made the vendor id -> vendor name translation available |
| 331 | * made CEC_LOG levels powers of 2 |
| 332 | * introduced CEC_LOG_TRAFFIC log level |
| 333 | * fixed: |
| 334 | * set the correct ackmask on startup |
| 335 | * wait for ack while keeping a lock |
| 336 | * wait for the processor thread to start before continueing on startup |
| 337 | * wait for messages to be transmitted before continueing in |
| 338 | CCECProcessor::Transmit() |
| 339 | * only set the logical address once when it has changed |
| 340 | * correct source for broadcast messages |
| 341 | * win32: create Release type installer |
| 342 | * changed: |
| 343 | * make all reads and write in CAdapterCommunication go through buffers. |
| 344 | * poll for a vendor ID of connected devices and switch to a non-standard |
| 345 | CEC implementation if needed. |
| 346 | * added vendor detection of Samsung and LG devices |
| 347 | * handle samsung remote command 'return' |
| 348 | * cec-client: |
| 349 | * added -la and --logical-address to the command line params |
| 350 | * added -d and --log-level params to cec-client |
| 351 | * added -sf and --short-log-file, which only log the actual messages, not |
| 352 | the level and timestamp |
| 353 | * added -f and --log-file parameters to cec-client |
| 354 | * added option to change the log level to cec-client |
| 355 | |
| 356 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 22:58:00 +0100 |
| 357 | |
| 358 | libcec (0.7-1) unstable; urgency=low |
| 359 | |
| 360 | * send a keypress with 0 duration when a key is pressed and with a duration |
| 361 | set when it's released |
| 362 | * added SetOSDString() to the interface (not supported by all tvs) |
| 363 | * fixed: 'routing change' is a broadcast message. log routing changes, but |
| 364 | don't send a 'set active view' message, so the active input won't be |
| 365 | changed |
| 366 | * log keypresses in the debug log |
| 367 | * added 'pa' command to cec-client, to change the physical address |
| 368 | * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so |
| 369 | the HDMI port number to use can be changed |
| 370 | * fixed: put the message processing code from WaitForAck() in ParseMessage(). |
| 371 | fixes missing incoming message logging of non-data messages when not |
| 372 | waiting for an ACK |
| 373 | * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK |
| 374 | before returning |
| 375 | * fixed: set initiator and destination first in cec_command::push_back(). |
| 376 | fixes 'tx' command in cec-client |
| 377 | * fixed: keep trying to connect while iTimeout isn't reached (default 10 |
| 378 | seconds). fixes exit with a 'permission denied' error when the device isn't |
| 379 | ready yet. remove CEC_SETTLE_DOWN_TIME |
| 380 | * fixed: don't call SetActiveView() when reporting the power status. fixes |
| 381 | loop which causes some TVs to report failed connections |
| 382 | * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed. |
| 383 | * fixed: add the device type as parameter when sending the physical address. |
| 384 | thanks bobo1on1 |
| 385 | * fixed: typo in libcec.pc.in |
| 386 | * added optional strLib parameter to LoadLibCec(), so the location of the |
| 387 | shared library can be specified |
| 388 | * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB |
| 389 | * use int instead of bool on the public C interface and remove stdbool.h include |
| 390 | * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h => |
| 391 | cecloader.h, CECTypes.h => cectypes.h |
| 392 | * updated debian package. split up libcec and libcec-dev |
| 393 | * fixed: changed to use dlopen instead of static linkage. shuffled headers a |
| 394 | bit. bumped interface to version 7 |
| 395 | * removed 'rt' from libraries. it's not needed (anymore) |
| 396 | * fixed: reset the active view after a routing change. issue #1 |
| 397 | * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an |
| 398 | error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear |
| 399 | * added contributors link |
| 400 | |
| 401 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 14 Oct 2011 17:34:00 +0200 |
| 402 | |
| 403 | libcec (0.6-1) unstable; urgency=low |
| 404 | |
| 405 | * bumped interface version to 6 |
| 406 | * fixed packet output (reporting the OSD name correctly now) |
| 407 | * refactored packet structs: split up in cec commands and adapter messages |
| 408 | * fixed i/o timings |
| 409 | * added Darwin support (thanks Davilla!) |
| 410 | * fixed WaitForAck() |
| 411 | * fixed possible deadlock when starting a new thread |
| 412 | * implemented vendor id and device class parsing. full detection will follow |
| 413 | * added "on" and "standby" commands to the test client |
| 414 | * retransmit packets if needed |
| 415 | * fix GetTimeMs() on linux |
| 416 | * added timestamp to log messages |
| 417 | |
| 418 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 09 Oct 2011 15:15:00 +0200 |
| 419 | |
| 420 | libcec (0.5-1) unstable; urgency=low |
| 421 | |
| 422 | * bumped interface version to 5 |
| 423 | * don't pass std::string and std::vector accross the interface |
| 424 | * fixed heap corruption crashes on windows |
| 425 | * fixed some memory leaks |
| 426 | * reset all structs to default values before doing with them |
| 427 | |
| 428 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 07 Oct 2011 22:00:00 +0200 |
| 429 | |
| 430 | libcec (0.4-3) unstable; urgency=low |
| 431 | |
| 432 | * fixed reconnect |
| 433 | * fixed some threading related bugs |
| 434 | * fixed deadlock on exit |
| 435 | * fixed wrongly reported physical address |
| 436 | |
| 437 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 06 Oct 2011 00:19:00 +0200 |
| 438 | |
| 439 | libcec (0.4-2) unstable; urgency=low |
| 440 | |
| 441 | * fixed int parameter sizes and some signed/unsigned warnings |
| 442 | * check whether m_port isn't NULL in ReadFromDevice |
| 443 | * stop the processor thread and delete the CSerialPort instance on exit |
| 444 | * added mutex in CSerialPort |
| 445 | * fix segfault on exit |
| 446 | * renamed libPlatform -> platform. |
| 447 | * stuck everything from libCEC in the CEC namespace to avoid namespace |
| 448 | polution |
| 449 | |
| 450 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 23:45:00 +0200 |
| 451 | |
| 452 | libcec (0.4-1) unstable; urgency=low |
| 453 | |
| 454 | * bumped interface version to 4 |
| 455 | * timeout parameter removed from Close()/cec_close(). return type changed to |
| 456 | void |
| 457 | * added cec_destroy() method |
| 458 | * removed timeout parameter from Transmit() |
| 459 | * change the default argument of PowerOnDevices() to CECDEVICE_TV |
| 460 | * removed PowerOffDevices(). use StandbyDevices() instead |
| 461 | * removed obsolete methods from the interface |
| 462 | * fixed bug: pthread_cond_wait was called without the mutex locked |
| 463 | * fixed possible deadlock: don't send messages and wait for an ack with the |
| 464 | mutex locked in CCECParser |
| 465 | * created a separate reader thread and fixed the 'lock timeout' bug |
| 466 | * testclient: use CECDEVICE_TV instead of the default argument |
| 467 | (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices() |
| 468 | |
| 469 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 00:48:00 +0200 |
| 470 | |
| 471 | libcec (0.3-1) unstable; urgency=low |
| 472 | |
| 473 | * added device detection support for Windows |
| 474 | |
| 475 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 02 Oct 2011 12:09:33 +0200 |
| 476 | |
| 477 | libcec (0.2-1) unstable; urgency=low |
| 478 | |
| 479 | * added a Close() method to the interface |
| 480 | * Added CEC command that were received by the adapter in a buffer that can be |
| 481 | read by a client with GetNextCommand()/cec_get_next_command(). added a |
| 482 | 'help' command to the test client, that displays all available commands |
| 483 | * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use |
| 484 | SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to |
| 485 | the testclient to set the logical address of the cec adapter |
| 486 | * Added optional logical and physical address parameters to |
| 487 | LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace |
| 488 | close tag in CECExports.h. updated interface documentation. bumped |
| 489 | interface version to 2. |
| 490 | * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the |
| 491 | test client. the previous one was too long and being rejected |
| 492 | |
| 493 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 28 Sep 2011 01:33:00 +0200 |
| 494 | |
| 495 | libcec (0.1-1) unstable; urgency=low |
| 496 | |
| 497 | * Initial release v0.1 |
| 498 | |
| 499 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 28 Sep 2011 23:55:48 +0200 |