ChangeLog

   1 libcec (1.3-1) unstable; urgency=low
   2
   3   * changed/added:
   4     * make libudev optional. if libudev is not available on linux, adapter
   5       autodetection will also not be available. fixes compilation on Hardy/ATV1
   6     * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET
   7       language
   8     * added vendor support for LG
   9     * added vendor support for Philips
  10     * added vendor support for Yamaha
  11     * added vendor support for Onkyo
  12     * added 'scan' command to cec-client, that displays info about devices on
  13       the bus. made all ToString() methods available on the interface.
  14     * added '-s' or '--single-command' to cec-client. starting cec-client with
  15       this parameter executes a single command in cec-client and does not power
  16       on devices on startup and power them off on exit. this way, you can use
  17       cec-client in a shell script. since there's some handshaking involved at
  18       startup, this is not very fast. to execute a command and only display the
  19       result and any error/warning, execute it with
  20       RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch
  21       files are a bit different)
  22     * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to
  23       cec-client's parameters
  24     * handle image view on and text view on
  25     * handle routing information and report physical address opcodes
  26     * handle audio status updates
  27     * send ping and bootloader commands via the output queue
  28     * scan the CEC bus for devices when starting libcec
  29     * pass all commands that are directed at libcec to listeners
  30   * interface changes:
  31     * added GetActiveSource()/cec_get_active_source()
  32     * added IsActiveSource()/cec_is_active_source()
  33     * added GetDevicePhysicalAddress()/cec_get_device_physical_address()
  34     * added GetDeviceOSDName()/cec_get_osd_name()
  35     * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/
  36       cec_send_key_release()
  37     * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(),
  38       MuteAudio()/cec_mute_audio()
  39     * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/
  40       cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type().
  41     * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load
  42       and when a device with the same physical address is detected, libcec will
  43       use the selected hdmi port on that device. should fix source selection on
  44       other devices, like an amplifier
  45     * added a hook in libcec for physical address autodetection
  46   * fixed:
  47     * don't request the physical address from the tv (it's always 0x0000)
  48     * set the proper ackmask before doing anything else
  49     * don't unlock the transmit mutex in CCECProcessor while waiting for an
  50       answer
  51     * fix device polling
  52     * refactor CEC read/write. keep a single lock for all writes, not one per
  53       device
  54     * ignore other data while waiting for a response
  55     * retry failed tranmissions
  56     * don't delete a message before it's been sent when starting the bootloader
  57     * or when sending a ping
  58     * fixed possible segfault when switching the command handler after a vendor
  59     * id changed
  60     * handle audio opcodes correctly
  61     * inactive source should be directly addressed at the TV
  62     * don't report a changed physical address when it hasn't changed
  63     * routing information sets the stream path, not the physical address
  64     * don't scan the whole bus in CCECProcessor::IsActiveDeviceType()
  65     * don't request the vendor id from devices that are handled by libcec
  66     * mark device status as present when a command was received from a device
  67     * always send a power on command in CCECBusDevice::PowerOn()
  68     * don't request updates statusses unless needed
  69     * report physical address sends 3 parameters, not 2. check whether the
  70       device type is correct
  71     * devices can send vendor commands from other vendors, so don't assume the
  72       device is of a certain vendor when it sends commands with a vendor id
  73     * thread safety fixes. bugzid: 19
  74     * clear any previous input when opening a connection to the adapter.
  75       bugzid: 54
  76     * use the correct source address in CSLCommandHandler::HandleVendorCommand()
  77     * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5
  78     * renamed enum methods. fixes potential macro collision with isset().
  79       thanks davilla
  80     * don't change the active device when receiving stream path changed
  81       messages. fixes wrong source selection when powering after the TV.
  82
  83  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 09 Dec 2011 12:16:00 +0100
  84
  85 libcec (1.2-1) unstable; urgency=low
  86
  87   * bugfixes:
  88     * pass the deck_control command to libcec listeners
  89     * check whether the initiator is valid in CCECProcessor::ParseCommand().
  90       fixes possible segfault when parsing invalid data
  91
  92  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sat, 12 Nov 2011 13:36:00 +0100
  93
  94 libcec (1.1-3) unstable; urgency=low
  95
  96   * fixed return value in CCECProcessor::SetStreamPath(), which prevented
  97     active source and menu state from being sent
  98
  99  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 23:36:00 +0100
 100
 101 libcec (1.1-2) unstable; urgency=low
 102
 103   * forgot to update the headers to v1.1
 104
 105  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 18:56:00 +0100
 106
 107 libcec (1.1-1) unstable; urgency=low
 108
 109   * interface changes:
 110     * added logical address autodetection and let libcec handle multiple types
 111       simultaniously. for logical address autodetection, you have to use
 112       CECInit()/cec_init_typed() instead of CECCreate()/cec_init()
 113     * added SetActiveSource()/cec_set_active_source() to the interface.
 114       deprecated SetActiveView()/cec_set_active_view()
 115     * added SetMenuState()
 116     * added PollDevice()/cec_poll_device()
 117     * removed duplicate method SetActiveSource() / SetActiveView()
 118     * added SetDeckControlMode() and SetDeckInfo()
 119   * fixed:
 120     * added vendor detection for panasonic and broadcast active view and set
 121       menu state when a panasonic device sets the stream path. thanks for the
 122       pointer cptcoconut.
 123     * added vendor code for pioneer
 124     * osd string is 13 chars max. don't send more
 125     * send the correct cec version for each device
 126     * switch to panasonic specific cec implementation if a panasonic device was
 127       detected
 128     * send the correct device type in TransmitPhysicalAddress()
 129     * send a reply from the correct device when the stream path is requested
 130     * opcode 0x80 means the stream path changed, not the physical address
 131     * don't poll for a vendor ID in monitoring mode
 132     * fixed parameter parsing in SetVendorId()
 133     * buffer up commands that are received while waiting for an ack. only send
 134       'active source' message for the actual active source
 135     * win32: prepend the com port path with '\\.\', so com ports > 9 can be
 136       accessed. thanks smolesen
 137     * audio systems cannot be an active source, so don't transmit active
 138       source message from this device
 139     * only send 'active source' when powered on
 140     * only set the osd name for the primary device. use default values for
 141       others
 142     * increase physical address with 0x100 per device
 143     * win32: removed unneeded afxres.h include in the resource files, which
 144       is not present when using studio express. thanks Ghuron
 145     * fixed C headers
 146     * mark the active source as active and other devices as inactive
 147     * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER
 148     * transmit the menu state as (active) when the stream path is set
 149   * changed:
 150     * changed copyright of boblight files with permission of the original
 151       author
 152     * partial handling of audio related opcodes
 153     * more consistent log messages
 154     * set a device type and name for each CCECBusDevice
 155     * keep a power and menu state per device
 156     * renamed all Broadcast...() and Report...() methods to Transmit...()
 157     * renamed SetOSDString() to TransmitOSDString()
 158     * changed debug level of 'did not receive ack' from error to debug
 159     * only set the power status to 'on' for the primary device
 160     * moved method decriptions from cecc.h to cec.h
 161     * only send a power on command when a device isn't on already and set
 162       the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while
 163       powering on
 164     * handle CEC_OPCODE_STANDBY
 165     * handle CEC_OPCODE_ACTIVE_SOURCE
 166     * always start in standby mode and let the tv (or other device) send the
 167       power on command
 168     * renamed the last few enums
 169     * handle deck related opcodes.
 170     * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown'
 171
 172  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 17:42:00 +0100
 173
 174 libcec (1.0-1) unstable; urgency=low
 175
 176   * interface changes:
 177     * set lib interface version back to 1.0 and rename GetLibVersion() to
 178       GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion()
 179     * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor
 180       version number to 1
 181   * fixed:
 182     * samsung's vendor specific remote keypresses don't send key releases. added
 183       call to AddKey() directly after the keypress
 184     * always reset the button press time in CLibCEC::AddKey()
 185     * always wait for a signal in CCECProcessor::Transmit()
 186   * changed:
 187     * drop shared_ptr and use a normal pointer. removed boost dependency
 188
 189  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 04 Nov 2011 00:14:00 +0100
 190
 191 libcec (0.8-2) unstable; urgency=low
 192
 193   * added 'libboost-dev' to build deps
 194
 195  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 01 Nov 2011 23:31:00 +0100
 196
 197 libcec (0.8-1) unstable; urgency=low
 198
 199   * interface changes:
 200     * added GetDevicePowerStatus()/cec_get_device_power_status()
 201     * added GetDeviceVendorId()/cec_get_device_vendor_id()
 202     * added GetDeviceMenuLanguage()/cec_get_device_menu_language()
 203     * added GetDeviceCecVersion()/cec_get_device_cec_version()
 204     * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when
 205       monitoring is enabled, the device will only log the data it received,
 206       but will not respond to any message
 207     * removed timeout parameter in Transmit() and included the ack timeout in
 208        the cec_command struct
 209     * made the vendor id -> vendor name translation available
 210     * made CEC_LOG levels powers of 2
 211     * introduced CEC_LOG_TRAFFIC log level
 212   * fixed:
 213     * set the correct ackmask on startup
 214     * wait for ack while keeping a lock
 215     * wait for the processor thread to start before continueing on startup
 216     * wait for messages to be transmitted before continueing in
 217       CCECProcessor::Transmit()
 218     * only set the logical address once when it has changed
 219     * correct source for broadcast messages
 220     * win32: create Release type installer
 221   * changed:
 222     * make all reads and write in CAdapterCommunication go through buffers.
 223     * poll for a vendor ID of connected devices and switch to a non-standard
 224       CEC implementation if needed.
 225     * added vendor detection of Samsung and LG devices
 226     * handle samsung remote command 'return'
 227   * cec-client:
 228     * added -la and --logical-address to the command line params
 229     * added -d and --log-level params to cec-client
 230     * added -sf and --short-log-file, which only log the actual messages, not
 231       the level and timestamp
 232     * added -f and --log-file parameters to cec-client
 233     * added option to change the log level to cec-client
 234
 235  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 01 Nov 2011 22:58:00 +0100
 236
 237 libcec (0.7-1) unstable; urgency=low
 238
 239   * send a keypress with 0 duration when a key is pressed and with a duration
 240     set when it's released
 241   * added SetOSDString() to the interface (not supported by all tvs)
 242   * fixed: 'routing change' is a broadcast message. log routing changes, but
 243     don't send a 'set active view' message, so the active input won't be
 244     changed
 245   * log keypresses in the debug log
 246   * added 'pa' command to cec-client, to change the physical address
 247   * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so
 248     the HDMI port number to use can be changed
 249   * fixed: put the message processing code from WaitForAck() in ParseMessage().
 250     fixes missing incoming message logging of non-data messages when not
 251     waiting for an ACK
 252   * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK
 253     before returning
 254   * fixed: set initiator and destination first in cec_command::push_back().
 255     fixes 'tx' command in cec-client
 256   * fixed: keep trying to connect while iTimeout isn't reached (default 10
 257     seconds). fixes exit with a 'permission denied' error when the device isn't
 258     ready yet. remove CEC_SETTLE_DOWN_TIME
 259   * fixed: don't call SetActiveView() when reporting the power status. fixes
 260     loop which causes some TVs to report failed connections
 261   * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed.
 262   * fixed: add the device type as parameter when sending the physical address.
 263     thanks bobo1on1
 264   * fixed: typo in libcec.pc.in
 265   * added optional strLib parameter to LoadLibCec(), so the location of the
 266     shared library can be specified
 267   * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB
 268   * use int instead of bool on the public C interface and remove stdbool.h include
 269   * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h =>
 270     cecloader.h, CECTypes.h => cectypes.h
 271   * updated debian package. split up libcec and libcec-dev
 272   * fixed: changed to use dlopen instead of static linkage. shuffled headers a
 273     bit. bumped interface to version 7
 274   * removed 'rt' from libraries. it's not needed (anymore)
 275   * fixed: reset the active view after a routing change. issue #1
 276   * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an
 277     error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear
 278   * added contributors link
 279
 280  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 14 Oct 2011 17:34:00 +0200
 281
 282 libcec (0.6-1) unstable; urgency=low
 283
 284   * bumped interface version to 6
 285   * fixed packet output (reporting the OSD name correctly now)
 286   * refactored packet structs: split up in cec commands and adapter messages
 287   * fixed i/o timings
 288   * added Darwin support (thanks Davilla!)
 289   * fixed WaitForAck()
 290   * fixed possible deadlock when starting a new thread
 291   * implemented vendor id and device class parsing. full detection will follow
 292   * added "on" and "standby" commands to the test client
 293   * retransmit packets if needed
 294   * fix GetTimeMs() on linux
 295   * added timestamp to log messages
 296
 297  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sun, 09 Oct 2011 15:15:00 +0200
 298
 299 libcec (0.5-1) unstable; urgency=low
 300
 301   * bumped interface version to 5
 302   * don't pass std::string and std::vector accross the interface
 303   * fixed heap corruption crashes on windows
 304   * fixed some memory leaks
 305   * reset all structs to default values before doing with them
 306
 307  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 07 Oct 2011 22:00:00 +0200
 308
 309 libcec (0.4-3) unstable; urgency=low
 310
 311   * fixed reconnect
 312   * fixed some threading related bugs
 313   * fixed deadlock on exit
 314   * fixed wrongly reported physical address
 315
 316  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 06 Oct 2011 00:19:00 +0200
 317
 318 libcec (0.4-2) unstable; urgency=low
 319
 320   * fixed int parameter sizes and some signed/unsigned warnings
 321   * check whether m_port isn't NULL in ReadFromDevice
 322   * stop the processor thread and delete the CSerialPort instance on exit
 323   * added mutex in CSerialPort
 324   * fix segfault on exit
 325   * renamed libPlatform -> platform.
 326   * stuck everything from libCEC in the CEC namespace to avoid namespace
 327     polution
 328
 329  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 04 Oct 2011 23:45:00 +0200
 330
 331 libcec (0.4-1) unstable; urgency=low
 332
 333   * bumped interface version to 4
 334   * timeout parameter removed from Close()/cec_close(). return type changed to
 335     void
 336   * added cec_destroy() method
 337   * removed timeout parameter from Transmit()
 338   * change the default argument of PowerOnDevices() to CECDEVICE_TV
 339   * removed PowerOffDevices(). use StandbyDevices() instead
 340   * removed obsolete methods from the interface
 341   * fixed bug: pthread_cond_wait was called without the mutex locked
 342   * fixed possible deadlock: don't send messages and wait for an ack with the
 343     mutex locked in CCECParser
 344   * created a separate reader thread and fixed the 'lock timeout' bug
 345   * testclient: use CECDEVICE_TV instead of the default argument
 346     (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices()
 347
 348  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 04 Oct 2011 00:48:00 +0200
 349
 350 libcec (0.3-1) unstable; urgency=low
 351
 352   * added device detection support for Windows
 353
 354  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sun, 02 Oct 2011 12:09:33 +0200
 355
 356 libcec (0.2-1) unstable; urgency=low
 357
 358   * added a Close() method to the interface
 359   * Added CEC command that were received by the adapter in a buffer that can be
 360     read by a client with GetNextCommand()/cec_get_next_command(). added a
 361     'help' command to the test client, that displays all available commands
 362   * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use
 363     SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to
 364     the testclient to set the logical address of the cec adapter
 365   * Added optional logical and physical address parameters to
 366     LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace
 367     close tag in CECExports.h. updated interface documentation. bumped
 368     interface version to 2.
 369   * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the
 370     test client. the previous one was too long and being rejected
 371
 372  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 28 Sep 2011 01:33:00 +0200
 373
 374 libcec (0.1-1) unstable; urgency=low
 375
 376   * Initial release v0.1
 377
 378  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Wed, 28 Sep 2011 23:55:48 +0200