1 libcec (2.0.3-1) unstable; urgency=low
4 * log unhandled vendor remote keycodes in the log, so they get logged
5 without debugging enabled
7 * handling of active route changes. github issue #56 and issue #58
8 * new combo key handling broke samsung's vendor specific remote buttons.
10 * don't try to set controlled mode when using firmware version 1 and crash.
12 * fix for LG models that send a vendor key up after a normal key down.
14 * some TVs send keypresses to us without making us the active source. mark
15 us as active source when this happens. github issue #71
16 * LG doesn't send routing changes, and marks the TV as active source when
17 switching to another source that's not been selected in the simplink menu
18 instead. this change keeps libCEC marked as powered on and keep the deck
19 state set to CEC_DECK_INFO_OTHER_STATUS_LG. fixes keypresses not working
20 after switching to another source and back to libCEC's hdmi port via the
21 source select menu instead of the simplink menu. github issue #71
22 * don't respond with an abort message when receiving a vendor remote button
24 * respond with CEC_ABORT_REASON_INVALID_OPERAND when receiving a keypress
26 * typo in stop+pause combo key that prevented one of the keys from working
27 * rpi: log what data we received exactly when we receive an response from
28 the pi's firmware that doesn't match any command that we sent. issue #77
29 * cubox: added adapter ID interface
31 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 31 Oct 2012 11:50:00 +0100
33 libcec (2.0.2-2) unstable; urgency=medium
36 * updating the device status after a poll was broken and could reset the
37 status of devices that were marked as handled by libCEC to 'not
39 * don't keep spamming the bus with a vendor command when an active source
40 switch is pending for panasonic, but only send it when needed
41 * reset CVLCommandHandler::m_bCapabilitiesSent when the TV goes to standby
43 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 15 Oct 2012 13:52:00 +0100
45 libcec (2.0.2-1) unstable; urgency=low
48 * missing from the previous changelog: added support for the CuBox TDA995x
50 * lower retry timeout for source switches
51 * cec-client: wait for the source switch to finish when cec-client is
52 called with the -s switch
53 * request the power status of the TV directly after registering a new
56 * don't keep trying to send 'image view on' commands to the TV when no TV
57 is connected, and just send the 'set active source' command. fixes source
58 switch and debug log spam for people without a TV connected
59 * don't keep waiting for an updated power status from the TV for Panasonic,
60 but request a status update once every 5 seconds, or we can possibly wait
61 forever for the tv to send it
62 * log what we received exactly when logging FIXME
63 * typo in CVLCommandHandler::VendorPreActivateSourceHook. bugzid: 1087
64 * if we failed to get the physical address of the device that we are
65 connected to in the config, then try to use the address that was
66 persisted in the eeprom before resetting to the default value, 1.0.0.0.
68 * don't update the device status of unregistered/broadcast
69 * log all device status changes
70 * CCECClient::IsLibCECActiveSource returns false now while the active
71 source command is pending
72 * log failed acks and other errors in the debug log again
73 * don't send 'image view on' when the TV is already powering up
74 * reset the delayed source switch timeout properly, so we don't spam
76 * don't change the device status when sending a delayed source switch
77 * don't send out commands to a device that is marked as not present or
80 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 11 Oct 2012 15:48:00 +0100
82 libcec (2.0.1-1) unstable; urgency=low
86 * added signal handlers to client applications
87 * Documentation updated
88 * replaced cec-config-gui by libCEC tray
89 * log the exact data for failed transmissions, not the opcode
90 * don't log every frame, unless debugging was enabled in ./configure or
92 * changed some log levels from NOTICE to DEBUG, so the non-debugging output
95 * WARNING: breaking API changes
96 * clean up: deprecated methods and fields removed
97 * callback parameters changed to fix plain C compilation
98 * added GetAdapterProductId()+GetAdapterVendorId()/
99 cec_get_adapter_product_id()+cec_get_adapter_vendor_id()
100 * added iDoubleTapTimeoutMs to libcec_configuration
101 * remove all pre-v2.0 compatibility checks
103 * fix plain C compilation
104 * prevent sending directly addressed commands from being sent to broadcast
105 * don't wait for a response when sending a reply, so we don't block message
107 * message response signaling and logging
108 * prevent double taps by not sending the same key press twice within 200ms
109 * fall back to the primary client when
110 CCECProcessor::HandleLogicalAddressLost() and no client could be found
111 * no more delay up to 2 seconds when exiting libCEC
112 * don't get caught in a loop in CVLCommandHandler when the source switch
113 was not allowed and no power status request was sent
114 * always send image view on to the tv, don't check the power status
115 * only respond to vendor commands for panasonic if we are the destination
116 * rpi: current firmware first sends a change to logical address 'broadcast'
117 and then signals us that the address was lost. libCEC then failed to
118 re-register, because it didn't know any client at this address
120 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 8 Oct 2012 21:30:00 +0100
122 libcec (1.9.1-1) unstable; urgency=low
125 * added the type of adapter to libcec_configuration,
126 and display the type in cec-client -l
127 * added device detection support for composite usb devices on windows.
128 needs the windows ddk, and it's expected to be found in
129 C:\WinDDK\7600.16385.1
132 * adapter type was added to libcec_configuration
133 * moved cec_adapter_messagecode from cectypes.h to USBCECAdapterMessage.h
136 * retry m_port->Read(..) if an EINTR errror occurs instead of closing the
137 connection. credits @Obruni. closes #38
138 * make cec-client include cecloader.h from our project, not from system
139 * fixed duplicate entries check in CUSBCECAdapterDetection
140 * fixed missing cec_version updates in libcec_configuration
141 * transmit an active source message after <set stream path> to a device
142 that's handled by libCEC. closes #43
143 * rpi: handle vendor specific remote control presses. closes #42
144 * rpi: handle VC_CEC_LOGICAL_ADDR_LOST, sent by the Pi's firmware when
145 the logical address was taken while CEC was being reinitialised
146 * panasonic: send out an active source message when the tv started up
147 because it sometimes doesn't request this
149 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 5 Sep 2012 16:54:00 +0100
151 libcec (1.8.2-1) unstable; urgency=low
154 * p8: match to the response provided by the firmware when checking
155 responses (added in firmware v2 rev6)
158 * windows: update the error message when an error occurs while writing to
160 * delayed source switch time was reset, resulting in an attempt every
161 second until it succeeded
162 * ensure that the vendor commands are always sent for panasonic, and that
163 the deck status for lg isn't reset. fixes some buttons not working after
164 a second or delayed source switch
165 * added guard so ReplaceHandler() doesn't accidently try to replace a
166 handler for the broadcast address
167 * wait until the commandhandler is replaced before registering a client,
168 so we don't register a client and replace it directly afterwards if the
169 tv doesn't support the device type
170 * ensure that the command handler of the tv is replaced before registering
171 a client, or it might result in a double eeprom write attempt
172 * p8: don't disable controlled mode when switching to monitoring mode
173 * p8: do delayed eeprom writes async or it'll block processing other input
175 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 3 Aug 2012 02:35:00 +0100
177 libcec (1.8.1-1) unstable; urgency=low
180 * added support for the Raspberry Pi.
181 * added cec-client -i / cec-client --info that calls GetLibInfo()
183 * added CAdapterFactory, to create IAdapterCommunication instances
184 * added --debug to configure, to include -ggdb
187 * added GetLibInfo()/cec_get_lib_info(), that shows how libCEC was compiled
188 and with which features included.
189 * added ToString(cec_user_control_code_key) to the interface
192 * disallow sending CEC_OPCODE_SET_STREAM_PATH - not allowed by the CEC spec
193 * persist the configuration in the eeprom after initialising the client.
194 fixes wrong/old settings being used in autonomous mode, which broke the
196 * persist the new configuration when the hdmi port setting changed
197 * cleaned locks around callbacks
198 * always set controlled mode to false when unregistering the last client.
199 fixes 30 second timeout before controlled mode gets deactivated
200 * updated the cached device type setting properly when persisting new
201 settings. correct return value from WriteEEPROM(). lock a mutex when
203 * LibCecSharp: set the primary LA in CecLogicalAddresses
205 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 25 Jul 2012 13:05:00 +0100
207 libcec (1.7.2-1) unstable; urgency=low
210 * display a warning message if libCEC was not compiled with adapter
211 detection for the target platform
212 * panasonic: added a vendor command for panasonic that will enable routing
213 of some more buttons on the remote (guide, text, ...)
214 * standby command won't be forwarded more than once every 10 seconds
215 * added vendor ids for Akai, AOC, Benq, Daewoo, Grundig, Medion, Sharp and
217 * cec-client: don't display debug output by default in 'cec-client -l'
220 * added a callback for clients that is called when a source is
221 (de)activated, so the client can respond to this action
222 * added cec_command::PushArray()
225 * command forwarding. fixes player not going into standby mode
226 * missing virtual keyword in CCECCommandHandler::
227 GetReplacementDeviceType()
228 * replace the handler (if needed) in GetHandler()
229 * reply with abort reason 'invalid operand' to vendor commands that we
231 * changed all Handle...() commands to return a cec_abort_reason and send
232 the correct abort reason to the initiator as a response to directly
234 * changed 'couldn't change the ackmask: the connection is closed' into a
236 * don't send active source commands when the physical address is invalid or
238 * set the power status of a device to 'powered on' after it sends a stream
239 path change. can save an unneeded power state update request
240 * removed dupe code around delayed activate source commands. check for
241 delayed active source commands every 5 seconds instead of 15 seconds.
242 * panasonic: reset m_bPowerUpEventReceived in CVLCommandHandler when the
243 device lets us know it went into standby mode. fixes possibly failed
244 active source switches after it succeeded once
245 * panasonic: fixed delayed source switch for panasonic
246 * panasonic: mark the tv as powered up once it sends the audiomode request
247 * set the physical address of each device controlled by a CCECClient if
249 * Windows could get stuck in a loop in case there an error occured while
250 reading registry entries
251 * ABI fixes (binary compat with v1.2 for Windows and v1.5.2 for others)
252 * replace the handler directly after getting the vendor id of a device when
254 * copy the class member values of the old handler when creating a new
255 command handler, or a delayed activate source will get lost when the
257 * cec-client: wrong client version
258 * Makefile cleanups. don't link cec-client and cec-config against libudev
260 * pin libcec to the same version as libcec1
261 * LibCecSharp: update the local configuration after connecting
262 * LibCecSharp: better handling of callbacks
264 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 27 Jun 2012 02:06:00 +0100
266 libcec (1.7.1-1) unstable; urgency=low
269 * added physical address detection via ADL for AMD graphics cards
270 * attempt to get the edid from nvidia's graphics card driver on linux via
271 /proc/acpi/video/NGFX/HDMI/EDID
272 * attempt to get the PA from the registry on windows if we fail to get the
273 physical address from the display driver
274 * changed the order in CCECClient::SetPhysicalAddress() so it first checks
275 whether a PA override is set in libcec_configuration.iPhysicalAddress,
276 then checks whether the address can be detected, and if both failed it'll
277 use the HDMI port + base device setting
278 * cec-client: only active the source when reconnecting if libcec was the
279 active source before closing the connection
280 * platform: added tcp server sockets for posix
283 * libcec_configuration.bAutodetectAddress is now read-only, and will be set
284 to 1 by libCEC if the PA was autodetected
285 * LibCecSharp: don't use an int but a CecUserControlCode in a CecKeypress
288 * don't unregister clients in CLibCEC when disconnecting, but only in
289 CCECProcessor. fixes reconnect after close
290 * MSGCODE_TIMEOUT_ERROR is a response to a transmission
291 * retry 'activate source' every 10 seconds if it failed
292 * don't respond with a poll from the broadcast address when receiving
293 in CSLCommandHandler::HandleDeviceVendorId(), but use the primary LA of
294 the client as source instead
295 * hold a lock when changing the ackmask in
296 CUSBCECAdapterCommunication::Open
297 * don't respond with a feature abort to opcode play messages. bugzid: 873
298 * get the vendor id of the TV before allocating logical addresses, so we
299 can determine if the TV supports the requested device type directly
300 * TransmitImageViewOn() and TransmitActiveSource() always returned true,
301 even if sending the command failed, so the retry for failed source
302 activations was never triggered
303 * open libcec.so.1 instead of libcec.so in cecloader.h. credits @coling.
305 * fixed missing firmware version and build date in cec-client -l /
306 GetDeviceInformation()
308 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 10 Jun 2012 13:39:00 +0100
310 libcec (1.6.1-5) unstable; urgency=low
312 * synced /debian directory with the one in precise (with a couple of changes)
314 * serial port locking on linux
315 * cec-client: added -m/--monitor startup options, which will start a
316 monitor-only client. use 'mon 0' to switch to a normal client
317 * display an alert message when the firmware of the adapter can be upgraded
318 * added CEC 1.4 opcodes
319 * send a feature abort again for all unhandled commands
320 * refactored CLibCEC so a client registers itself within CCECProcessor,
321 which then allocates one or more logical addresses for it.
324 * added a new setting, bMonitorOnly, which will start a monitor-only client
327 * ensure that we don't crash out when trying to stop a thread that hasn't
329 * don't send a 'disconnected' alert when the close method is called
330 * use the correct source when transmitting an abort message as a reposonse
331 to a vendor command with id
333 * check the client version, not the server version in
334 libcec_configuration::operator==()
335 * cec-config: fix physical address detection
336 * LibCecSharp: fixed buffer overrun when copying libcec_configuration.
337 fixes crash when trying to save the configuration in the config gui.
339 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 14 May 2012 22:39:00 +0100
341 libcec (1.6.1-2) unstable; urgency=low
343 * Build depends on pkg-config. (Closes: #669919)
344 * libudev-dev only optionally needed for Linux.
346 -- Andres Mejia <amejia@debian.org> Sat, 21 Apr 2012 19:03:19 -0400
348 libcec (1.6.1-1) unstable; urgency=low
350 [ Mario Limonciello ]
351 * New upstream version (LP: #982272)
354 * New release fixes build failure with GCC-4.7. (Closes: #667241)
355 * Bump to Standards-Version 3.9.3.
357 -- Andres Mejia <amejia@debian.org> Sat, 21 Apr 2012 00:02:08 -0400
359 libcec (1.3.2-3) unstable; urgency=low
361 * Make dpkg-source options default for packaging.
363 -- Andres Mejia <amejia@debian.org> Tue, 10 Jan 2012 18:12:57 -0500
365 libcec (1.3.2-2) unstable; urgency=low
367 * Add options to pass to dpkg-source.
369 -- Andres Mejia <amejia@debian.org> Sun, 08 Jan 2012 22:59:34 -0500
371 libcec (1.3.2-1) unstable; urgency=low
373 * Initial release. (Closes: #655143)
375 -- Andres Mejia <amejia@debian.org> Sun, 08 Jan 2012 15:36:49 -0500
377 libcec (1.6-3) unstable; urgency=low
380 * cec-client: show the firmware build date if available in cec-client -l
381 * cec-client: don't activate the source when starting
382 * cec-client: group up the output of the 'scan' command, and add the
383 currently active source to the output
384 * log the libCEC version in the 'connected to the CEC adapter' log entry,
385 and add the firmware build date to the line if it's available, so all
386 relevant version info is available in 1 log line.
387 * async writes for CUSBCECAdapterCommunication. less locks and polls, more
389 * added 'make docs' target, that updates the doxygen documentation
392 * added operator == and != for libcec_configuration
393 * added GetResponseOpcode(cec_opcode opcode) to cec_command
394 * added the firmware build date to libcec_configuration, so it can be
395 displayed by the client too.
396 * added static CLibCEC::Alert() method and CEC_ALERT_CONNECTION_LOST value
397 * added a callback to handle menu state changes. if the callback method
398 returns 1, then the change is processed by the CCECBusDevice too. if 0,
399 then the CCECBusDevice will always have menu state 'activated', so
400 keypresses are routed. bugzid: 724
401 * added a default menu language to libcec_configuration and set this
402 language for devices controlled by libcec. bugzid: 69
405 * CCECProcessor::IsActiveSource() - TV was never checked
406 * don't call the deprecated SetActiveView() method in cec-client
407 * request the active source if unknown in CCECProcessor::GetActiveSource()
408 * don't try to match a device with PA 0xFFFF.
409 * don't change the power status of a device when changing the stream path
410 * don't set the power status to 'powered off' when marking the source
411 managed by libcec as inactive, or the tv will might send a power control
412 keycode when making it active again, potentially shutting down the system
413 * potential segfault in CCECProcessor::GetDeviceByPhysicalAddress()
414 * stream path changes when changed to the TV source (PA 0)
415 * clear the unsupported features list in CCECBusDevice::ResetDeviceStatus()
416 * never mark vendor commands as unsupported (only some may be unsupported),
417 as well as some others that should never be marked unsupported
418 * don't retry in CCECCommandHandler if the command has been marked as
420 * don't request the PA of devices when handling an incoming CEC command, or
421 it'll block things while waiting for a response. if that response never
422 comes, or comes late, then other incoming commands will be timed out
423 before they are handled
424 * optimisation - strip unneeded virtual keywords from top level
426 * use the vlcommandhandler for the primary device that is handled by libCEC
427 when a panasonic tv is detected, so delayed activate source commands are
428 using the correct handler. bugzid: 723
429 * set the power status of device controlled by libCEC to
431 instead of IN_TRANSITION_STANDBY_TO_ON. reset the device status of a
432 device if it was detected as removed. bugzid: 755
433 * potentially uninitialised values in cec_command
434 * delay the 'active source' command for panasonic, until the vendor command
435 that reports that the TV is powered on has been received. bugzid: 723
436 * only respond to Give Physical Address with Report Physical Address.
438 This fixes several reports of the TV improperly switching to the libcec
439 device after it has previously switched to another source. Fix confirmed
440 with Panasonic and also reported to be an issue with Samsung and
442 * check whether callback methods are set to a valid ptr
443 * number of retries for polls
444 * win32: fix build in paths with spaces. bugzid: 730
445 * LibCecSharp: free the alert GC callback when cleaning up
446 * the wrong setting was being read when powering on devices
447 * close the connection when a comm error was detected, and notify the
449 * don't segfault when calling ThreadsWait() without a valid thread
450 * lib/platform: fixed memleak
451 * leak in CCECAdapterMessageQueue::Write
452 * don't send commands if we know them to be unsupported. bugzid: 725
454 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Apr 2012 11:30:00 +0100
456 libcec (1.6-2) unstable; urgency=low
459 * fixed typo in CUSBCECAdapterCommands::RequestSettings() that prevented
460 the settings from being read. the settings were still written, but never
461 read when bGetSettingsFromROM = 1.
463 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Apr 2012 11:30:00 +0100
465 libcec (1.6-1) unstable; urgency=medium
468 * full firmware V2 support
469 * -o/--osdname argument for cec-client to set a custom osd name
470 * added the firmware version to cec-client's -l / --list-devices command.
472 * added power on command for Samsung AVR devices. bugzid: 361
473 * added buttoncode for 'channels list' on Samsung (0x96)
474 * don't check for the windows ddk when a prebuilt driver installer is
476 * respond to Get Menu Language. bugzid: 547. In the event that the menu
477 language is undefined in libcec (currently the default), the response
478 will be a feature abort.
481 * added the firmware version to libcec_configuration (read-only). bumped
482 server version to 1.6.0. fixed 'unknown server version' message on
484 * added a new setting to control whether to put the TV in standby when the
485 player is put in standby. added some missing bits (version numbers,
486 config) to LibCecSharp. bugzid: 558
487 * added an alert callback. bugzid: 462
488 * added bShutdownOnStandby to libcec_configuration. bugzid: 660. This
489 setting tells the client to shutdown when the TV switches off and is
490 complimentary to bPowerOffOnStandby, which tells the PC to suspend.
491 They are kept separate to maintain backwards compatability.
494 * gcc 4.7 compilation
495 * poll doesn't have an opcode. bugzid: 591
496 * wait for MSGEND when data was received when opening the connection.
498 * mark the correct device as active source after a stream path change.
499 if the new address is not found, but the old address is, then mark the
500 old address as inactive. fixes TV switching back to the old active source
501 when it scans for devices. bugzid: 592
502 * ensure that the vendor ID is sent before trying to activate any SL device
504 * fixed possible crash when in CLibCEC::IsLibCECActiveSource() when libCEC
505 doesn't know which device is the active source. bugzid: 479
506 * correct handling CEC_USER_CONTROL_CODE_POWER. This ensures that the power
507 code always operates as a toggle, depending on the current state, and
508 that SetCurrentButton is always called for a valid user control code.
510 * frequency wasn't checked in GetTimeMs(), leading to incorrect wait times
511 on some windows systems
512 * refactored USB adapter communication. less locks, shorter locks, added
513 documentation, lots of clean ups and no more incoming messages that are
515 * the destructor of CSerialSocket didn't call Close()
516 * added guards in CSerialPort
517 * reset m_socket to INVALID_SERIAL_SOCKET_VALUE after closing the
519 * always wait for thread exit in CThread's desctructor
520 * crash on exit after GetDeviceInformation()
521 * check whether the destination is valid before setting anything in
522 m_bWaitingForAck. fixes heap corruption and crash on exit. bugzid: 479
523 * bUseTVMenuLanguage from libcec_configuration wasn't copied in
524 SetConfiguration(), so this setting was reset to the default value
525 (enabled) every time. bugzid: 617
526 * request the vendor id of a device if needed when the device status is
527 changed into 'present'. bugzid: 361
528 * give priority to messages from the TV. removed the global lock in
529 CCECProcessor when sending. this is no longer needed. bugzid: 238
530 * add some bounds checking to the HDMI port number. bugzid: 508
531 * fixed usbser.sys copying in the driver .INF. bugzid: 503
532 * only update the physical address when it has actually changed. bugzid:
534 * moved the static variables in os-threads from the header to a separate
535 cpp file, or it could lead to problems when included multiple times
536 * don't send an active source command when the physical address couldn't be
537 set, or it might confuse other CEC devices
538 * serial socket timeouts. bugzid: 654
539 * fixed possible crash when trying to request a vendor id of a device when
540 the address of libCEC isn't known yet. bugzid: 654
541 * extra guard so no commands are transmitted without a valid initiator.
543 * moved the timed ping to a separate thread. bugzid: 654
544 * persist settings directly when they're changed, only persist settings
545 that actually changed, only instruct the device to persist the settings
546 in eeprom when something changed, and don't persist settings on exit.
548 * cec-config-gui: persist settings both in the eeprom and in the settings
550 * validate the input in CCECProcessor::IsActiveSource(). fixes potential
551 crash when the active source isn't known. bugzid: 671
553 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 16 Apr 2012 18:03:00 +0100
555 libcec (1.5-4) unstable; urgency=low
558 * OS-X installation requirements and pointer
559 * full v2 firmware support:
560 * ping the adapter every 15 seconds. bugzid: 541
561 * added v2 msgcodes. bugzid: 543
562 * implemented the write methods for the v2 configuration. bugzid: 543
563 * included the logical addresses in the persisted configuration for v2.
565 * persist the configuration before closing the connection. only try to
566 persist the configuration when talking to a v2 firmware. bugzid: 543
567 * added GetSetting() to CUSBCECAdapterCommunication. bugzid: 543
568 * read the persisted settings from the ROM, and update it in
569 libcec_configuration if found. bugzid: 543
570 * cec-client: set bGetSettingsFromROM to 1 in cec-client. bugzid: 543
571 * cec-client: only read persisted EEPROM settings when -r or --rom is
572 provided as cmdline arg. bugzid: 543
573 * call SetControlledMode(false) as last command when closing the
574 connection in v2. bugzid: 542
575 * initial FreeBSD support: simply try to use ttyU*
578 * set controlled mode and retry to send the previous command if it failed
579 with MSGCODE_COMMAND_REJECTED
580 * m_iLineTimeout was never initialised and used. fixes MSGCODE_REJECTED
581 when transmitting a message and incorrect line timeouts being used
582 * mac configure compile bugzid: 157
583 * cec-config-gui: fixed application exit when the user clicked 'no' when
584 asked to reconnect. bugzid: 556
585 * only wait for multiple 'command accepted' response when sending a
586 transmit command, and only to 1 in other cases. bugzid: 543
587 * set the correct logical address mask before switching to autonomous mode.
589 * re-added SetLineTimeout(). bugzid: 543
590 * CUSBCECAdapterCommunication::SetControlledMode checked for the wrong sent
592 * os-x: don't add 0.5 before dividing in GetTimeMs()
593 * os-x: struct timespec now values weren't set correctly
595 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 16 Mar 2012 10:12:00 +0100
597 libcec (1.5-3) unstable; urgency=low
601 * default to firmware version 1 after 3 tries. some versions didn't send a
603 * fixed cec-config win32 compilation
605 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 03 Mar 2012 15:21:00 +0100
607 libcec (1.5-2) unstable; urgency=low
610 * added Toshiba's vendor id, and set the device ID of the primary device to
611 Toshiba's and transmit it when starting
612 * lock in SyncedBuffer
613 * added a timeout to StopThread()
614 * also add commands to unsupported features when receiving
615 CEC_ABORT_REASON_REFUSED
616 * cec-config-gui: set cbPortNumber enabled when the physical address
617 override isn't checked instead
618 * cec-config-gui: added support for the new 'send inactive source' setting
621 * added an 'send inactive source' option to libcec_configuration, only
622 supported by client/server 1.5.1 and up. bugzid: 439
623 * added a command to the interface to start the bootloader directly,
624 without going through all checks. bugzid: 218
625 * LibCecSharp: implemented support for the new 'send inactive source'
629 * don't send an updated configuration when libCEC hasn't been initialised
631 * don't send an updated configuration back when initialising. let the
632 client call the GetCurrentConfiguration() method. bugzid: 459
633 * configuration updates from libCEC. bugzid: 459
634 * fixed accidental double deref. the method parameter already does that.
636 * use CLOCK_MONOTONIC for timing info, since gettimeofday is affected by
637 ntp and by manually adjusting the system time
638 * the timeout value of pthread_cond_timedwait has to be referenced to
640 * don't add data to the input buffer in CUSBCECAdapterCommunication before
641 it's fully initialised
642 * fixed return value of CUSBCECAdapterCommunication::ParseMessage(). fixes
643 messages not being parsed in certain occasions
644 * don't try to transmit when the processor is being stopped
645 * set the server version in the LibCEC's constructor, since this is
646 checked by clients. fixes 'invalid libCEC version' popup when inserting
648 * don't wait for the full timeout to pass in CCECProcessor::
649 OpenConnection(), but retry to connect 2 times. fixes 'port busy' errors
650 when initialising libCEC. bugzid: 436
651 * use the correct Sleep() method in CCECProcessor::OpenConnection(). the
652 thread hasn't been started there yet, so the sleep wasn't working. fixes
653 'device or resource busy' when plugging in the adapter. bugzid: 436
654 * check the adapter ping and firmware before starting the reader thread, so
655 we really leave the com port alone for a second when it fails because of
656 a busy error. bugzid: 436
657 * ensure that the connection is really closed before retrying to connect.
659 * LibCecSharp: recreate the delegates properly when (re)connecting to
662 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 28 Feb 2012 21:19:00 +0100
664 libcec (1.5-1) unstable; urgency=low
667 * a new libcec_configuration structs, which allows the client app to pass
668 a number of new options, like waking multiple devices on startup,
669 overriding the vendor id, etc.
670 * a new configuration GUI for Windows (.NET). this allows you to set
671 libCEC's configuration for XBMC in a convenient GUI.
672 * a CLI configuration tool (unfinished) for other platforms. will be
673 finished in an update.
674 * implemented power up for LG devices other than a TV
675 * win32: don't install libcec to the system directory by default, and
676 delete previous (testing) copies if present
677 * wait for multiple responses, not just for one at a time
678 * set the ackmask to 0 when closing the connection
679 * don't send 'image view on' when calling SetActiveSource()
680 * don't send power on, acitve source and standby commands by default in
682 * platform: added CTryLockObject
683 * platform: added an Init() method in CTimeout, so it can be reset
686 * added a new initialiser method: CecInitialise()/cec_initialise(), that
687 accepts a "libc_configuration" struct as parameter. this way, the
688 signature of the init method can stay the same when adding new options.
689 in LibCecSharp, the new method appears as a new constructor.
690 * added CanPersistConfiguration()/cec_can_persist_configuration()
691 * added PersistConfiguration()/cec_persist_configuration()
692 * added GetCurrentConfiguration()/cec_get_current_configuration()
693 * added SetConfiguration()/cec_set_configuration()
694 * added GetLogicalAddresses()/cec_get_logical_addresses(): returns the list
695 of addresses controlled by libCEC
696 * added RescanDevices()/cec_rescan_devices(): lets libCEC force polls to
697 all logical addresses.
698 * added a callback that is called when libCEC's configuration changed.
699 * moved the autodetect address api call to libcec_configuration. only send
700 power up commands to non-tv devices when the power state is not
701 on/transition->on. let players call the power up/power down command.
702 * return the anynet return keycode directly instead of translating it to
703 'return' for v1.5.0+ clients
704 * extracted CecSharpTypes.h in LibCecSharp. LibCecSharp is now in the
706 * include the local cectypes.h in cec.h and cecc.h instead of system wide
707 * deprecated GetLibVersion() methods. use libcec_configuration instead
708 * removed deprecated CECCreate() method
711 * fixed a lot of LG specific issues
712 * fixed OS-X compilation. credits: Dustin Cooper
713 * fixed a couple of possible deadlocks, e.g. when closing the connection
715 * cleaned up existing code
716 * libCEC no longer puts incoming data in a fifo buffer, but tries to
717 process it directly, which fixes issues like libCEC blocking processing
718 new commands while waiting for transmission acks.
719 * 'unsupported command' marking in CCECBusDevice
720 * ensure that the ackmask is always set to 0 when closing the connection
721 and that the call doesn't block the Close() call
722 * don't try to read or write in CUSBCECAdapterCommunication when the
723 connection has been closed
724 * LibCecSharp: added quotes to the linker statement for libcec.lib. fixes
725 compilation in paths with spaces. closes #20
726 * LibCecSharp: set the callback methods in libcec to NULL before closing
727 the connection, since these might already have been destroyed in .NET
728 * LibCecSharp: delete the internal callback struct when closing the
730 * LibCecSharp: pass correctly formatted logical address lists
731 * ensure that the vendor id is requested first when requesting info from a
732 device, so we are using the correct handler
733 * keep the 'busy state' of the command handler in CCECBusDevice
734 * poll the next device when the current is handled by libCEC.
735 * check the vendor id of a device before sending a power on command
736 * ensure that there always is at least one device type set
737 * transmit a keypress and key release as power on command when the target
739 * don't do a full reinit when not needed
740 * fix active source switches for the standard CEC implementation
741 * ensure that we don't send data to ourself
742 * check whether the port is open, not whether libCEC is initialised in
744 * platform: fixed return value from CCondition::Wait()
745 * platform: don't broadcast but wake one thread in
746 CProtectedSocket::MarkReady()
747 * platform: include stdint.h in windows/os-types.h instead of typedef'ing
749 * platform: fixed tcp socket error handling and return value.
750 * platform: fixed return values of socket operations in lib/platform
751 * platform: added predicate in CCondition
752 * deleted the signed driver from the tree, since that doesn't work. let the
753 installer create a new signed driver on the production build system
755 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 19 Feb 2012 01:04:00 +0100
757 libcec (1.4-4) unstable; urgency=low
760 * added tcp client sockets to lib/platform (WIP)
761 * clean up lib/platform
762 * added: set controlled mode on after opening a connection to the adapter
764 * added an IAdapterCommunicationCallback interface an use a callback method
765 to pass newly received cec_commands to CCECProcessor
766 * added "driver only" and "driver + libcec" sections to the installer
767 * added a signed driver
768 * created a separate driver installer, which is included in the libCEC
769 installer. uninstalls the old unsigned version of libCEC and the driver
770 when it's found and installs the new one in C:\Program Files(x86)\
771 Pulse Eight\USB-CEC Adapter.
772 * don't sign development binaries with a temporary key. devs can do that
773 themselves when they want LibCecSharp in the GAC
775 * added SetStreamPath()/cec_set_stream_path_logical()/
776 cec_set_stream_path_physical() to the interface, to send a
777 "set stream path" command over the CEC bus, used to activate another
780 * transmit 'menu state activated' after the stream path has been set to a
781 device that is handled by libCEC. should fix remote commands not working
782 properly on Panasonic TVs and after another source has been active.
784 * set the ackmask to 0x0 when trying to find a free logical address
785 * keep trying to reconnect to the com port until the timeout runs out.
787 * wait 500 ms before trying to retransmit a command. always wait for the
788 result of a transmission in CCECCommandHandler::Transmit()
789 * receive and send full cec_commands, not CCECAdapterMessages in
790 CAdapterCommunication. extract an IAdapterCommunication interface. fixed
791 potentially missed data in CAdapterCommunication
792 * close and delete the connection when the processor thread ends. fixes
793 reconnect after standby (access denied / connection already opened)
794 * don't replace handlers when not initialised, or the primary device's
795 logical addres isn't known yet, which can lead to crashes. don't call
796 handlers directly in CCECProcessor without holding a lock on them
797 * fixed possible crash when command handler were switched while it was
799 * keep the mutex locked when calling ReplaceHandlers() in CCECProcessor
800 * win32: also timeout when data is received in SocketRead()
801 * win32: fixed < vista runtime and compilation
802 * win32: ping the adapter and request the firmware version in
803 CUSBCECAdapterCommunication instead of CCECProcesssor. fixes failed
805 * win32: fixed crash on exit in LibCecSharp
807 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 6 Feb 2012 14:26:00 +0100
809 libcec (1.4-3) unstable; urgency=low
812 * try to ping the device and grab the firmware version until the connect
813 timeout runs out. fixes failed reconnect after standby, when the adapter
814 is still being initialised
816 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 27 Jan 2012 13:05:00 +0100
818 libcec (1.4-2) unstable; urgency=low
821 * added a firmware flash script for linux.
822 usage: ./support/cec-flash-device.sh /path/to/firware.hex
823 * refactored threading/locking - added windows native instead of
824 pthread-win32, so we can compile native x64 too
825 * check whether the adapter responds when connecting to it and report the
826 firmware version of the adapter after connecting
827 * moved create-installer.cmd to support/
828 * completely removed AM_SILENT_RULES
830 * compile LibCecSharp against .NET framework 2.0 and sign the assembly
832 * only the key release events were sent, not keypresses, which appeared in
833 clients as laggy keypresses
834 * fixed reconnect after standby
835 * wait for active tranmission to finish when opening a connection to the
836 adapter. fixes initialisation errors
837 * set the default transmit timeout properly instead of using 0
838 * fixed possible deadlock because of a negative timeout in
839 CAdapterCommunication::WaitForTransmitSucceeded()
840 * fixed error message in cec-client (unable to open the device on port ...)
841 * exit cec-client after entering bootloader mode
842 * MSGCODE_START_BOOTLOADER doesn't respond with MSGCODE_COMMAND_ACCEPTED
844 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 25 Jan 2012 23:28:00 +0100
846 libcec (1.4-1) unstable; urgency=low
849 * added the vendor id for Sony
850 * always refresh the power state of a device when it hasn't been updated
852 * do silent builds by default
854 * added optional callback methods to libCEC. enable them by calling
855 EnableCallbacks(ICECCallbacks *callbacks) /
856 cec_enable_callbacks(ICECCallbacks *callbacks). after this method is
857 called, the GetNext...() methods will not return any data
858 * added the same callbacks to LibCecSharp. implement CecCallbackMethods
859 and override the methods in there
861 * use the given timeout when trying to open a connection to the CEC
863 * resolved difference between method name in LibCECC.cpp and cecc.h.
864 credits: Doug Johnson
865 * don't transmit physical addresses while holding a lock in CCECProcessor
866 * don't hold a lock when sending an active source message.
867 * unload libCEC when the lib version is invalid
868 * "unused" warnings suppressed
870 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 12 Jan 2012 19:06:00 +0100
872 libcec (1.3-3) unstable; urgency=low
875 * place in libudev include in an extern C block. fixes compilations on
876 older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann
877 * added pkg-config to the dependencies list. issue #15
878 * updated README. closes #14
879 * added a script that tests some basic functions of the CEC adapter:
880 /support/cec-test-device.sh
882 * don't make libCEC the active source when changing the physical address.
883 don't send active source messages on startup, when not the active source
884 fixes unwanted device power ups
885 * replace the command handler directly after receiving a changed vendor
886 id. change the primary type from recording device to playback device
888 * don't send a deck status update when sending an active source message
890 * only switch handlers once when using the generic handler
891 * don't switch handlers when not needed
892 * hold a lock in CCECProcessor::SetHDMIPort()
893 * don't send deck status updates when sending an active source message by
896 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 3 Jan 2012 22:48:00 +0100
898 libcec (1.3-2) unstable; urgency=low
901 * copy libcec.dll to the XBMC installation dir when XBMC is found
902 * disable background polling. let the client request this info when needed
903 * update the power status of a device when it's set to
904 CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON
905 * wait for the correct response when requesting something, not just any
907 * don't keep trying the same command/request after receiving a feature
910 * change the previously unused boolean parameter in volume control methods
911 to bSendRelease, and only send a key release when it's true. default to
914 * don't send the power up/down keypress to listeners when in the initial
915 device state (powered off). fixes unexpected shutdown in XBMC when
916 connecting to the CEC adapter.
917 * send a 'menu state activated' command when starting up. bugzid: 113
918 * don't wait for a response when not needed
919 * don't hold a lock while waiting for a response. fixes failed libCEC
920 inits and slow responses
921 * don't replace a command handler when it's being used. fixes possible
923 * don't try to do anything before the processor thread has started
924 * don't transmit active source messages when the physical address is
926 * don't init the default handler before the physical address is known
928 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 29 Dec 2011 03:05:00 +0100
930 libcec (1.3-1) unstable; urgency=low
933 * make libudev optional. if libudev is not available on linux, adapter
934 autodetection will also not be available. fixes compilation on Hardy/ATV1
935 * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET
937 * added vendor support for LG
938 * added vendor support for Philips
939 * added vendor support for Yamaha
940 * added vendor support for Onkyo
941 * added 'scan' command to cec-client, that displays info about devices on
942 the bus. made all ToString() methods available on the interface.
943 * added '-s' or '--single-command' to cec-client. starting cec-client with
944 this parameter executes a single command in cec-client and does not power
945 on devices on startup and power them off on exit. this way, you can use
946 cec-client in a shell script. since there's some handshaking involved at
947 startup, this is not very fast. to execute a command and only display the
948 result and any error/warning, execute it with
949 RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch
950 files are a bit different)
951 * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to
952 cec-client's parameters
953 * handle image view on and text view on
954 * handle routing information and report physical address opcodes
955 * handle audio status updates
956 * send ping and bootloader commands via the output queue
957 * scan the CEC bus for devices when starting libcec
958 * pass all commands that are directed at libcec to listeners
960 * added GetActiveSource()/cec_get_active_source()
961 * added IsActiveSource()/cec_is_active_source()
962 * added GetDevicePhysicalAddress()/cec_get_device_physical_address()
963 * added GetDeviceOSDName()/cec_get_osd_name()
964 * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/
965 cec_send_key_release()
966 * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(),
967 MuteAudio()/cec_mute_audio()
968 * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/
969 cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type().
970 * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load
971 and when a device with the same physical address is detected, libcec will
972 use the selected hdmi port on that device. should fix source selection on
973 other devices, like an amplifier
974 * added a hook in libcec for physical address autodetection
976 * don't request the physical address from the tv (it's always 0x0000)
977 * set the proper ackmask before doing anything else
978 * don't unlock the transmit mutex in CCECProcessor while waiting for an
981 * refactor CEC read/write. keep a single lock for all writes, not one per
983 * ignore other data while waiting for a response
984 * retry failed tranmissions
985 * don't delete a message before it's been sent when starting the bootloader
986 * or when sending a ping
987 * fixed possible segfault when switching the command handler after a vendor
989 * handle audio opcodes correctly
990 * inactive source should be directly addressed at the TV
991 * don't report a changed physical address when it hasn't changed
992 * routing information sets the stream path, not the physical address
993 * don't scan the whole bus in CCECProcessor::IsActiveDeviceType()
994 * don't request the vendor id from devices that are handled by libcec
995 * mark device status as present when a command was received from a device
996 * always send a power on command in CCECBusDevice::PowerOn()
997 * don't request updates statusses unless needed
998 * report physical address sends 3 parameters, not 2. check whether the
999 device type is correct
1000 * devices can send vendor commands from other vendors, so don't assume the
1001 device is of a certain vendor when it sends commands with a vendor id
1002 * thread safety fixes. bugzid: 19
1003 * clear any previous input when opening a connection to the adapter.
1005 * use the correct source address in CSLCommandHandler::HandleVendorCommand()
1006 * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5
1007 * renamed enum methods. fixes potential macro collision with isset().
1009 * don't change the active device when receiving stream path changed
1010 messages. fixes wrong source selection when powering after the TV.
1012 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 09 Dec 2011 12:16:00 +0100
1014 libcec (1.2-1) unstable; urgency=low
1017 * pass the deck_control command to libcec listeners
1018 * check whether the initiator is valid in CCECProcessor::ParseCommand().
1019 fixes possible segfault when parsing invalid data
1021 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 12 Nov 2011 13:36:00 +0100
1023 libcec (1.1-3) unstable; urgency=low
1025 * fixed return value in CCECProcessor::SetStreamPath(), which prevented
1026 active source and menu state from being sent
1028 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 23:36:00 +0100
1030 libcec (1.1-2) unstable; urgency=low
1032 * forgot to update the headers to v1.1
1034 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 18:56:00 +0100
1036 libcec (1.1-1) unstable; urgency=low
1038 * interface changes:
1039 * added logical address autodetection and let libcec handle multiple types
1040 simultaniously. for logical address autodetection, you have to use
1041 CECInit()/cec_init_typed() instead of CECCreate()/cec_init()
1042 * added SetActiveSource()/cec_set_active_source() to the interface.
1043 deprecated SetActiveView()/cec_set_active_view()
1044 * added SetMenuState()
1045 * added PollDevice()/cec_poll_device()
1046 * removed duplicate method SetActiveSource() / SetActiveView()
1047 * added SetDeckControlMode() and SetDeckInfo()
1049 * added vendor detection for panasonic and broadcast active view and set
1050 menu state when a panasonic device sets the stream path. thanks for the
1052 * added vendor code for pioneer
1053 * osd string is 13 chars max. don't send more
1054 * send the correct cec version for each device
1055 * switch to panasonic specific cec implementation if a panasonic device was
1057 * send the correct device type in TransmitPhysicalAddress()
1058 * send a reply from the correct device when the stream path is requested
1059 * opcode 0x80 means the stream path changed, not the physical address
1060 * don't poll for a vendor ID in monitoring mode
1061 * fixed parameter parsing in SetVendorId()
1062 * buffer up commands that are received while waiting for an ack. only send
1063 'active source' message for the actual active source
1064 * win32: prepend the com port path with '\\.\', so com ports > 9 can be
1065 accessed. thanks smolesen
1066 * audio systems cannot be an active source, so don't transmit active
1067 source message from this device
1068 * only send 'active source' when powered on
1069 * only set the osd name for the primary device. use default values for
1071 * increase physical address with 0x100 per device
1072 * win32: removed unneeded afxres.h include in the resource files, which
1073 is not present when using studio express. thanks Ghuron
1075 * mark the active source as active and other devices as inactive
1076 * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER
1077 * transmit the menu state as (active) when the stream path is set
1079 * changed copyright of boblight files with permission of the original
1081 * partial handling of audio related opcodes
1082 * more consistent log messages
1083 * set a device type and name for each CCECBusDevice
1084 * keep a power and menu state per device
1085 * renamed all Broadcast...() and Report...() methods to Transmit...()
1086 * renamed SetOSDString() to TransmitOSDString()
1087 * changed debug level of 'did not receive ack' from error to debug
1088 * only set the power status to 'on' for the primary device
1089 * moved method decriptions from cecc.h to cec.h
1090 * only send a power on command when a device isn't on already and set
1091 the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while
1093 * handle CEC_OPCODE_STANDBY
1094 * handle CEC_OPCODE_ACTIVE_SOURCE
1095 * always start in standby mode and let the tv (or other device) send the
1097 * renamed the last few enums
1098 * handle deck related opcodes.
1099 * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown'
1101 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 17:42:00 +0100
1103 libcec (1.0-1) unstable; urgency=low
1105 * interface changes:
1106 * set lib interface version back to 1.0 and rename GetLibVersion() to
1107 GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion()
1108 * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor
1111 * samsung's vendor specific remote keypresses don't send key releases. added
1112 call to AddKey() directly after the keypress
1113 * always reset the button press time in CLibCEC::AddKey()
1114 * always wait for a signal in CCECProcessor::Transmit()
1116 * drop shared_ptr and use a normal pointer. removed boost dependency
1118 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 04 Nov 2011 00:14:00 +0100
1120 libcec (0.8-2) unstable; urgency=low
1122 * added 'libboost-dev' to build deps
1124 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 23:31:00 +0100
1126 libcec (0.8-1) unstable; urgency=low
1128 * interface changes:
1129 * added GetDevicePowerStatus()/cec_get_device_power_status()
1130 * added GetDeviceVendorId()/cec_get_device_vendor_id()
1131 * added GetDeviceMenuLanguage()/cec_get_device_menu_language()
1132 * added GetDeviceCecVersion()/cec_get_device_cec_version()
1133 * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when
1134 monitoring is enabled, the device will only log the data it received,
1135 but will not respond to any message
1136 * removed timeout parameter in Transmit() and included the ack timeout in
1137 the cec_command struct
1138 * made the vendor id -> vendor name translation available
1139 * made CEC_LOG levels powers of 2
1140 * introduced CEC_LOG_TRAFFIC log level
1142 * set the correct ackmask on startup
1143 * wait for ack while keeping a lock
1144 * wait for the processor thread to start before continueing on startup
1145 * wait for messages to be transmitted before continueing in
1146 CCECProcessor::Transmit()
1147 * only set the logical address once when it has changed
1148 * correct source for broadcast messages
1149 * win32: create Release type installer
1151 * make all reads and write in CAdapterCommunication go through buffers.
1152 * poll for a vendor ID of connected devices and switch to a non-standard
1153 CEC implementation if needed.
1154 * added vendor detection of Samsung and LG devices
1155 * handle samsung remote command 'return'
1157 * added -la and --logical-address to the command line params
1158 * added -d and --log-level params to cec-client
1159 * added -sf and --short-log-file, which only log the actual messages, not
1160 the level and timestamp
1161 * added -f and --log-file parameters to cec-client
1162 * added option to change the log level to cec-client
1164 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 22:58:00 +0100
1166 libcec (0.7-1) unstable; urgency=low
1168 * send a keypress with 0 duration when a key is pressed and with a duration
1169 set when it's released
1170 * added SetOSDString() to the interface (not supported by all tvs)
1171 * fixed: 'routing change' is a broadcast message. log routing changes, but
1172 don't send a 'set active view' message, so the active input won't be
1174 * log keypresses in the debug log
1175 * added 'pa' command to cec-client, to change the physical address
1176 * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so
1177 the HDMI port number to use can be changed
1178 * fixed: put the message processing code from WaitForAck() in ParseMessage().
1179 fixes missing incoming message logging of non-data messages when not
1181 * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK
1183 * fixed: set initiator and destination first in cec_command::push_back().
1184 fixes 'tx' command in cec-client
1185 * fixed: keep trying to connect while iTimeout isn't reached (default 10
1186 seconds). fixes exit with a 'permission denied' error when the device isn't
1187 ready yet. remove CEC_SETTLE_DOWN_TIME
1188 * fixed: don't call SetActiveView() when reporting the power status. fixes
1189 loop which causes some TVs to report failed connections
1190 * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed.
1191 * fixed: add the device type as parameter when sending the physical address.
1193 * fixed: typo in libcec.pc.in
1194 * added optional strLib parameter to LoadLibCec(), so the location of the
1195 shared library can be specified
1196 * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB
1197 * use int instead of bool on the public C interface and remove stdbool.h include
1198 * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h =>
1199 cecloader.h, CECTypes.h => cectypes.h
1200 * updated debian package. split up libcec and libcec-dev
1201 * fixed: changed to use dlopen instead of static linkage. shuffled headers a
1202 bit. bumped interface to version 7
1203 * removed 'rt' from libraries. it's not needed (anymore)
1204 * fixed: reset the active view after a routing change. issue #1
1205 * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an
1206 error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear
1207 * added contributors link
1209 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 14 Oct 2011 17:34:00 +0200
1211 libcec (0.6-1) unstable; urgency=low
1213 * bumped interface version to 6
1214 * fixed packet output (reporting the OSD name correctly now)
1215 * refactored packet structs: split up in cec commands and adapter messages
1217 * added Darwin support (thanks Davilla!)
1218 * fixed WaitForAck()
1219 * fixed possible deadlock when starting a new thread
1220 * implemented vendor id and device class parsing. full detection will follow
1221 * added "on" and "standby" commands to the test client
1222 * retransmit packets if needed
1223 * fix GetTimeMs() on linux
1224 * added timestamp to log messages
1226 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 09 Oct 2011 15:15:00 +0200
1228 libcec (0.5-1) unstable; urgency=low
1230 * bumped interface version to 5
1231 * don't pass std::string and std::vector accross the interface
1232 * fixed heap corruption crashes on windows
1233 * fixed some memory leaks
1234 * reset all structs to default values before doing with them
1236 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 07 Oct 2011 22:00:00 +0200
1238 libcec (0.4-3) unstable; urgency=low
1241 * fixed some threading related bugs
1242 * fixed deadlock on exit
1243 * fixed wrongly reported physical address
1245 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 06 Oct 2011 00:19:00 +0200
1247 libcec (0.4-2) unstable; urgency=low
1249 * fixed int parameter sizes and some signed/unsigned warnings
1250 * check whether m_port isn't NULL in ReadFromDevice
1251 * stop the processor thread and delete the CSerialPort instance on exit
1252 * added mutex in CSerialPort
1253 * fix segfault on exit
1254 * renamed libPlatform -> platform.
1255 * stuck everything from libCEC in the CEC namespace to avoid namespace
1258 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 23:45:00 +0200
1260 libcec (0.4-1) unstable; urgency=low
1262 * bumped interface version to 4
1263 * timeout parameter removed from Close()/cec_close(). return type changed to
1265 * added cec_destroy() method
1266 * removed timeout parameter from Transmit()
1267 * change the default argument of PowerOnDevices() to CECDEVICE_TV
1268 * removed PowerOffDevices(). use StandbyDevices() instead
1269 * removed obsolete methods from the interface
1270 * fixed bug: pthread_cond_wait was called without the mutex locked
1271 * fixed possible deadlock: don't send messages and wait for an ack with the
1272 mutex locked in CCECParser
1273 * created a separate reader thread and fixed the 'lock timeout' bug
1274 * testclient: use CECDEVICE_TV instead of the default argument
1275 (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices()
1277 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 00:48:00 +0200
1279 libcec (0.3-1) unstable; urgency=low
1281 * added device detection support for Windows
1283 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 02 Oct 2011 12:09:33 +0200
1285 libcec (0.2-1) unstable; urgency=low
1287 * added a Close() method to the interface
1288 * Added CEC command that were received by the adapter in a buffer that can be
1289 read by a client with GetNextCommand()/cec_get_next_command(). added a
1290 'help' command to the test client, that displays all available commands
1291 * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use
1292 SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to
1293 the testclient to set the logical address of the cec adapter
1294 * Added optional logical and physical address parameters to
1295 LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace
1296 close tag in CECExports.h. updated interface documentation. bumped
1297 interface version to 2.
1298 * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the
1299 test client. the previous one was too long and being rejected
1301 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 28 Sep 2011 01:33:00 +0200
1303 libcec (0.1-1) unstable; urgency=low
1305 * Initial release v0.1
1307 -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 28 Sep 2011 23:55:48 +0200