debian/changelog

   1 libcec (1.3-2) unstable; urgency=low
   2
   3    * changed/added:
   4      * copy libcec.dll to the XBMC installation dir when XBMC is found
   5      * disable background polling. let the client request this info when needed
   6      * update the power status of a device when it's set to
   7        CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON
   8      * wait for the correct response when requesting something, not just any
   9        response
  10      * don't keep trying the same command/request after receiving a feature
  11        abort message
  12    * interface changes:
  13      * change the previously unused boolean parameter in volume control methods
  14        to bSendRelease, and only send a key release when it's true. default to
  15        true
  16    * fixed:
  17      * don't send the power up/down keypress to listeners when in the initial
  18        device state (powered off). fixes unexpected shutdown in XBMC when
  19        connecting to the CEC adapter.
  20      * send a 'menu state activated' command when starting up. bugzid: 113
  21      * don't wait for a response when not needed
  22      * don't hold a lock while waiting for a response. fixes failed libCEC
  23        inits and slow responses
  24      * don't replace a command handler when it's being used. fixes possible
  25        crash on startup
  26      * don't try to do anything before the processor thread has started
  27      * don't transmit active source messages when the physical address is
  28        still 0xFFFF
  29      * don't init the default handler before the physical address is known
  30
  31  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 29 Dec 2011 03:05:00 +0100
  32
  33 libcec (1.3-1) unstable; urgency=low
  34
  35   * changed/added:
  36     * make libudev optional. if libudev is not available on linux, adapter
  37       autodetection will also not be available. fixes compilation on Hardy/ATV1
  38     * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET
  39       language
  40     * added vendor support for LG
  41     * added vendor support for Philips
  42     * added vendor support for Yamaha
  43     * added vendor support for Onkyo
  44     * added 'scan' command to cec-client, that displays info about devices on
  45       the bus. made all ToString() methods available on the interface.
  46     * added '-s' or '--single-command' to cec-client. starting cec-client with
  47       this parameter executes a single command in cec-client and does not power
  48       on devices on startup and power them off on exit. this way, you can use
  49       cec-client in a shell script. since there's some handshaking involved at
  50       startup, this is not very fast. to execute a command and only display the
  51       result and any error/warning, execute it with
  52       RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch
  53       files are a bit different)
  54     * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to
  55       cec-client's parameters
  56     * handle image view on and text view on
  57     * handle routing information and report physical address opcodes
  58     * handle audio status updates
  59     * send ping and bootloader commands via the output queue
  60     * scan the CEC bus for devices when starting libcec
  61     * pass all commands that are directed at libcec to listeners
  62   * interface changes:
  63     * added GetActiveSource()/cec_get_active_source()
  64     * added IsActiveSource()/cec_is_active_source()
  65     * added GetDevicePhysicalAddress()/cec_get_device_physical_address()
  66     * added GetDeviceOSDName()/cec_get_osd_name()
  67     * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/
  68       cec_send_key_release()
  69     * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(),
  70       MuteAudio()/cec_mute_audio()
  71     * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/
  72       cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type().
  73     * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load
  74       and when a device with the same physical address is detected, libcec will
  75       use the selected hdmi port on that device. should fix source selection on
  76       other devices, like an amplifier
  77     * added a hook in libcec for physical address autodetection
  78   * fixed:
  79     * don't request the physical address from the tv (it's always 0x0000)
  80     * set the proper ackmask before doing anything else
  81     * don't unlock the transmit mutex in CCECProcessor while waiting for an
  82       answer
  83     * fix device polling
  84     * refactor CEC read/write. keep a single lock for all writes, not one per
  85       device
  86     * ignore other data while waiting for a response
  87     * retry failed tranmissions
  88     * don't delete a message before it's been sent when starting the bootloader
  89     * or when sending a ping
  90     * fixed possible segfault when switching the command handler after a vendor
  91     * id changed
  92     * handle audio opcodes correctly
  93     * inactive source should be directly addressed at the TV
  94     * don't report a changed physical address when it hasn't changed
  95     * routing information sets the stream path, not the physical address
  96     * don't scan the whole bus in CCECProcessor::IsActiveDeviceType()
  97     * don't request the vendor id from devices that are handled by libcec
  98     * mark device status as present when a command was received from a device
  99     * always send a power on command in CCECBusDevice::PowerOn()
 100     * don't request updates statusses unless needed
 101     * report physical address sends 3 parameters, not 2. check whether the
 102       device type is correct
 103     * devices can send vendor commands from other vendors, so don't assume the
 104       device is of a certain vendor when it sends commands with a vendor id
 105     * thread safety fixes. bugzid: 19
 106     * clear any previous input when opening a connection to the adapter.
 107       bugzid: 54
 108     * use the correct source address in CSLCommandHandler::HandleVendorCommand()
 109     * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5
 110     * renamed enum methods. fixes potential macro collision with isset().
 111       thanks davilla
 112     * don't change the active device when receiving stream path changed
 113       messages. fixes wrong source selection when powering after the TV.
 114
 115  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 09 Dec 2011 12:16:00 +0100
 116
 117 libcec (1.2-1) unstable; urgency=low
 118
 119   * bugfixes:
 120     * pass the deck_control command to libcec listeners
 121     * check whether the initiator is valid in CCECProcessor::ParseCommand().
 122       fixes possible segfault when parsing invalid data
 123
 124  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sat, 12 Nov 2011 13:36:00 +0100
 125
 126 libcec (1.1-3) unstable; urgency=low
 127
 128   * fixed return value in CCECProcessor::SetStreamPath(), which prevented
 129     active source and menu state from being sent
 130
 131  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 23:36:00 +0100
 132
 133 libcec (1.1-2) unstable; urgency=low
 134
 135   * forgot to update the headers to v1.1
 136
 137  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 18:56:00 +0100
 138
 139 libcec (1.1-1) unstable; urgency=low
 140
 141   * interface changes:
 142     * added logical address autodetection and let libcec handle multiple types
 143       simultaniously. for logical address autodetection, you have to use
 144       CECInit()/cec_init_typed() instead of CECCreate()/cec_init()
 145     * added SetActiveSource()/cec_set_active_source() to the interface.
 146       deprecated SetActiveView()/cec_set_active_view()
 147     * added SetMenuState()
 148     * added PollDevice()/cec_poll_device()
 149     * removed duplicate method SetActiveSource() / SetActiveView()
 150     * added SetDeckControlMode() and SetDeckInfo()
 151   * fixed:
 152     * added vendor detection for panasonic and broadcast active view and set
 153       menu state when a panasonic device sets the stream path. thanks for the
 154       pointer cptcoconut.
 155     * added vendor code for pioneer
 156     * osd string is 13 chars max. don't send more
 157     * send the correct cec version for each device
 158     * switch to panasonic specific cec implementation if a panasonic device was
 159       detected
 160     * send the correct device type in TransmitPhysicalAddress()
 161     * send a reply from the correct device when the stream path is requested
 162     * opcode 0x80 means the stream path changed, not the physical address
 163     * don't poll for a vendor ID in monitoring mode
 164     * fixed parameter parsing in SetVendorId()
 165     * buffer up commands that are received while waiting for an ack. only send
 166       'active source' message for the actual active source
 167     * win32: prepend the com port path with '\\.\', so com ports > 9 can be
 168       accessed. thanks smolesen
 169     * audio systems cannot be an active source, so don't transmit active
 170       source message from this device
 171     * only send 'active source' when powered on
 172     * only set the osd name for the primary device. use default values for
 173       others
 174     * increase physical address with 0x100 per device
 175     * win32: removed unneeded afxres.h include in the resource files, which
 176       is not present when using studio express. thanks Ghuron
 177     * fixed C headers
 178     * mark the active source as active and other devices as inactive
 179     * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER
 180     * transmit the menu state as (active) when the stream path is set
 181   * changed:
 182     * changed copyright of boblight files with permission of the original
 183       author
 184     * partial handling of audio related opcodes
 185     * more consistent log messages
 186     * set a device type and name for each CCECBusDevice
 187     * keep a power and menu state per device
 188     * renamed all Broadcast...() and Report...() methods to Transmit...()
 189     * renamed SetOSDString() to TransmitOSDString()
 190     * changed debug level of 'did not receive ack' from error to debug
 191     * only set the power status to 'on' for the primary device
 192     * moved method decriptions from cecc.h to cec.h
 193     * only send a power on command when a device isn't on already and set
 194       the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while
 195       powering on
 196     * handle CEC_OPCODE_STANDBY
 197     * handle CEC_OPCODE_ACTIVE_SOURCE
 198     * always start in standby mode and let the tv (or other device) send the
 199       power on command
 200     * renamed the last few enums
 201     * handle deck related opcodes.
 202     * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown'
 203
 204  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 17:42:00 +0100
 205
 206 libcec (1.0-1) unstable; urgency=low
 207
 208   * interface changes:
 209     * set lib interface version back to 1.0 and rename GetLibVersion() to
 210       GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion()
 211     * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor
 212       version number to 1
 213   * fixed:
 214     * samsung's vendor specific remote keypresses don't send key releases. added
 215       call to AddKey() directly after the keypress
 216     * always reset the button press time in CLibCEC::AddKey()
 217     * always wait for a signal in CCECProcessor::Transmit()
 218   * changed:
 219     * drop shared_ptr and use a normal pointer. removed boost dependency
 220
 221  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 04 Nov 2011 00:14:00 +0100
 222
 223 libcec (0.8-2) unstable; urgency=low
 224
 225   * added 'libboost-dev' to build deps
 226
 227  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 01 Nov 2011 23:31:00 +0100
 228
 229 libcec (0.8-1) unstable; urgency=low
 230
 231   * interface changes:
 232     * added GetDevicePowerStatus()/cec_get_device_power_status()
 233     * added GetDeviceVendorId()/cec_get_device_vendor_id()
 234     * added GetDeviceMenuLanguage()/cec_get_device_menu_language()
 235     * added GetDeviceCecVersion()/cec_get_device_cec_version()
 236     * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when
 237       monitoring is enabled, the device will only log the data it received,
 238       but will not respond to any message
 239     * removed timeout parameter in Transmit() and included the ack timeout in
 240        the cec_command struct
 241     * made the vendor id -> vendor name translation available
 242     * made CEC_LOG levels powers of 2
 243     * introduced CEC_LOG_TRAFFIC log level
 244   * fixed:
 245     * set the correct ackmask on startup
 246     * wait for ack while keeping a lock
 247     * wait for the processor thread to start before continueing on startup
 248     * wait for messages to be transmitted before continueing in
 249       CCECProcessor::Transmit()
 250     * only set the logical address once when it has changed
 251     * correct source for broadcast messages
 252     * win32: create Release type installer
 253   * changed:
 254     * make all reads and write in CAdapterCommunication go through buffers.
 255     * poll for a vendor ID of connected devices and switch to a non-standard
 256       CEC implementation if needed.
 257     * added vendor detection of Samsung and LG devices
 258     * handle samsung remote command 'return'
 259   * cec-client:
 260     * added -la and --logical-address to the command line params
 261     * added -d and --log-level params to cec-client
 262     * added -sf and --short-log-file, which only log the actual messages, not
 263       the level and timestamp
 264     * added -f and --log-file parameters to cec-client
 265     * added option to change the log level to cec-client
 266
 267  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 01 Nov 2011 22:58:00 +0100
 268
 269 libcec (0.7-1) unstable; urgency=low
 270
 271   * send a keypress with 0 duration when a key is pressed and with a duration
 272     set when it's released
 273   * added SetOSDString() to the interface (not supported by all tvs)
 274   * fixed: 'routing change' is a broadcast message. log routing changes, but
 275     don't send a 'set active view' message, so the active input won't be
 276     changed
 277   * log keypresses in the debug log
 278   * added 'pa' command to cec-client, to change the physical address
 279   * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so
 280     the HDMI port number to use can be changed
 281   * fixed: put the message processing code from WaitForAck() in ParseMessage().
 282     fixes missing incoming message logging of non-data messages when not
 283     waiting for an ACK
 284   * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK
 285     before returning
 286   * fixed: set initiator and destination first in cec_command::push_back().
 287     fixes 'tx' command in cec-client
 288   * fixed: keep trying to connect while iTimeout isn't reached (default 10
 289     seconds). fixes exit with a 'permission denied' error when the device isn't
 290     ready yet. remove CEC_SETTLE_DOWN_TIME
 291   * fixed: don't call SetActiveView() when reporting the power status. fixes
 292     loop which causes some TVs to report failed connections
 293   * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed.
 294   * fixed: add the device type as parameter when sending the physical address.
 295     thanks bobo1on1
 296   * fixed: typo in libcec.pc.in
 297   * added optional strLib parameter to LoadLibCec(), so the location of the
 298     shared library can be specified
 299   * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB
 300   * use int instead of bool on the public C interface and remove stdbool.h include
 301   * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h =>
 302     cecloader.h, CECTypes.h => cectypes.h
 303   * updated debian package. split up libcec and libcec-dev
 304   * fixed: changed to use dlopen instead of static linkage. shuffled headers a
 305     bit. bumped interface to version 7
 306   * removed 'rt' from libraries. it's not needed (anymore)
 307   * fixed: reset the active view after a routing change. issue #1
 308   * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an
 309     error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear
 310   * added contributors link
 311
 312  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 14 Oct 2011 17:34:00 +0200
 313
 314 libcec (0.6-1) unstable; urgency=low
 315
 316   * bumped interface version to 6
 317   * fixed packet output (reporting the OSD name correctly now)
 318   * refactored packet structs: split up in cec commands and adapter messages
 319   * fixed i/o timings
 320   * added Darwin support (thanks Davilla!)
 321   * fixed WaitForAck()
 322   * fixed possible deadlock when starting a new thread
 323   * implemented vendor id and device class parsing. full detection will follow
 324   * added "on" and "standby" commands to the test client
 325   * retransmit packets if needed
 326   * fix GetTimeMs() on linux
 327   * added timestamp to log messages
 328
 329  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sun, 09 Oct 2011 15:15:00 +0200
 330
 331 libcec (0.5-1) unstable; urgency=low
 332
 333   * bumped interface version to 5
 334   * don't pass std::string and std::vector accross the interface
 335   * fixed heap corruption crashes on windows
 336   * fixed some memory leaks
 337   * reset all structs to default values before doing with them
 338
 339  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 07 Oct 2011 22:00:00 +0200
 340
 341 libcec (0.4-3) unstable; urgency=low
 342
 343   * fixed reconnect
 344   * fixed some threading related bugs
 345   * fixed deadlock on exit
 346   * fixed wrongly reported physical address
 347
 348  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 06 Oct 2011 00:19:00 +0200
 349
 350 libcec (0.4-2) unstable; urgency=low
 351
 352   * fixed int parameter sizes and some signed/unsigned warnings
 353   * check whether m_port isn't NULL in ReadFromDevice
 354   * stop the processor thread and delete the CSerialPort instance on exit
 355   * added mutex in CSerialPort
 356   * fix segfault on exit
 357   * renamed libPlatform -> platform.
 358   * stuck everything from libCEC in the CEC namespace to avoid namespace
 359     polution
 360
 361  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 04 Oct 2011 23:45:00 +0200
 362
 363 libcec (0.4-1) unstable; urgency=low
 364
 365   * bumped interface version to 4
 366   * timeout parameter removed from Close()/cec_close(). return type changed to
 367     void
 368   * added cec_destroy() method
 369   * removed timeout parameter from Transmit()
 370   * change the default argument of PowerOnDevices() to CECDEVICE_TV
 371   * removed PowerOffDevices(). use StandbyDevices() instead
 372   * removed obsolete methods from the interface
 373   * fixed bug: pthread_cond_wait was called without the mutex locked
 374   * fixed possible deadlock: don't send messages and wait for an ack with the
 375     mutex locked in CCECParser
 376   * created a separate reader thread and fixed the 'lock timeout' bug
 377   * testclient: use CECDEVICE_TV instead of the default argument
 378     (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices()
 379
 380  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 04 Oct 2011 00:48:00 +0200
 381
 382 libcec (0.3-1) unstable; urgency=low
 383
 384   * added device detection support for Windows
 385
 386  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sun, 02 Oct 2011 12:09:33 +0200
 387
 388 libcec (0.2-1) unstable; urgency=low
 389
 390   * added a Close() method to the interface
 391   * Added CEC command that were received by the adapter in a buffer that can be
 392     read by a client with GetNextCommand()/cec_get_next_command(). added a
 393     'help' command to the test client, that displays all available commands
 394   * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use
 395     SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to
 396     the testclient to set the logical address of the cec adapter
 397   * Added optional logical and physical address parameters to
 398     LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace
 399     close tag in CECExports.h. updated interface documentation. bumped
 400     interface version to 2.
 401   * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the
 402     test client. the previous one was too long and being rejected
 403
 404  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 28 Sep 2011 01:33:00 +0200
 405
 406 libcec (0.1-1) unstable; urgency=low
 407
 408   * Initial release v0.1
 409
 410  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Wed, 28 Sep 2011 23:55:48 +0200