debian/changelog

   1 libcec (1.4-3) unstable; urgency=low
   2
   3   * fixed:
   4     * try to ping the device and grab the firmware version until the connect
   5       timeout runs out. fixes failed reconnect after standby, when the adapter
   6       is still being initialised
   7
   8  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 27 Jan 2012 13:05:00 +0100
   9
  10 libcec (1.4-2) unstable; urgency=low
  11
  12    * changed/added:
  13      * added a firmware flash script for linux.
  14        usage: ./support/cec-flash-device.sh /path/to/firware.hex
  15      * refactored threading/locking - added windows native instead of
  16        pthread-win32, so we can compile native x64 too
  17      * check whether the adapter responds when connecting to it and report the
  18        firmware version of the adapter after connecting
  19      * moved create-installer.cmd to support/
  20      * completely removed AM_SILENT_RULES
  21    * interface changes:
  22      * compile LibCecSharp against .NET framework 2.0 and sign the assembly
  23    * fixed:
  24     * only the key release events were sent, not keypresses, which appeared in
  25       clients as laggy keypresses
  26     * fixed reconnect after standby
  27     * wait for active tranmission to finish when opening a connection to the
  28       adapter. fixes initialisation errors
  29     * set the default transmit timeout properly instead of using 0
  30     * fixed possible deadlock because of a negative timeout in
  31       CAdapterCommunication::WaitForTransmitSucceeded()
  32     * fixed error message in cec-client (unable to open the device on port ...)
  33     * exit cec-client after entering bootloader mode
  34     * MSGCODE_START_BOOTLOADER doesn't respond with MSGCODE_COMMAND_ACCEPTED
  35
  36  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 25 Jan 2012 23:28:00 +0100
  37
  38 libcec (1.4-1) unstable; urgency=low
  39
  40    * changed/added:
  41      * added the vendor id for Sony
  42      * always refresh the power state of a device when it hasn't been updated
  43        for 30 seconds
  44      * do silent builds by default
  45    * interface changes:
  46      * added optional callback methods to libCEC. enable them by calling
  47        EnableCallbacks(ICECCallbacks *callbacks) /
  48        cec_enable_callbacks(ICECCallbacks *callbacks). after this method is
  49        called, the GetNext...() methods will not return any data
  50      * added the same callbacks to LibCecSharp. implement CecCallbackMethods
  51        and override the methods in there
  52    * fixed:
  53      * use the given timeout when trying to open a connection to the CEC
  54        adapter
  55      * resolved difference between method name in LibCECC.cpp and cecc.h.
  56        credits: Doug Johnson
  57      * don't transmit physical addresses while holding a lock in CCECProcessor
  58      * don't hold a lock when sending an active source message.
  59      * unload libCEC when the lib version is invalid
  60      * "unused" warnings suppressed
  61
  62  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 12 Jan 2012 19:06:00 +0100
  63
  64 libcec (1.3-3) unstable; urgency=low
  65
  66    * changed/added:
  67      * place in libudev include in an extern C block. fixes compilations on
  68        older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann
  69      * added pkg-config to the dependencies list. issue #15
  70      * updated README. closes #14
  71      * added a script that tests some basic functions of the CEC adapter:
  72        /support/cec-test-device.sh
  73    * fixed:
  74      * don't make libCEC the active source when changing the physical address.
  75        don't send active source messages on startup, when not the active source
  76        fixes unwanted device power ups
  77      * replace the command handler directly after receiving a changed vendor
  78        id. change the primary type from recording device to playback device
  79        for panasonic TVs
  80      * don't send a deck status update when sending an active source message
  81        for panasonic TVs
  82      * only switch handlers once when using the generic handler
  83      * don't switch handlers when not needed
  84      * hold a lock in CCECProcessor::SetHDMIPort()
  85      * don't send deck status updates when sending an active source message by
  86        default
  87
  88  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 3 Jan 2012 22:48:00 +0100
  89
  90 libcec (1.3-2) unstable; urgency=low
  91
  92    * changed/added:
  93      * copy libcec.dll to the XBMC installation dir when XBMC is found
  94      * disable background polling. let the client request this info when needed
  95      * update the power status of a device when it's set to
  96        CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON
  97      * wait for the correct response when requesting something, not just any
  98        response
  99      * don't keep trying the same command/request after receiving a feature
 100        abort message
 101    * interface changes:
 102      * change the previously unused boolean parameter in volume control methods
 103        to bSendRelease, and only send a key release when it's true. default to
 104        true
 105    * fixed:
 106      * don't send the power up/down keypress to listeners when in the initial
 107        device state (powered off). fixes unexpected shutdown in XBMC when
 108        connecting to the CEC adapter.
 109      * send a 'menu state activated' command when starting up. bugzid: 113
 110      * don't wait for a response when not needed
 111      * don't hold a lock while waiting for a response. fixes failed libCEC
 112        inits and slow responses
 113      * don't replace a command handler when it's being used. fixes possible
 114        crash on startup
 115      * don't try to do anything before the processor thread has started
 116      * don't transmit active source messages when the physical address is
 117        still 0xFFFF
 118      * don't init the default handler before the physical address is known
 119
 120  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 29 Dec 2011 03:05:00 +0100
 121
 122 libcec (1.3-1) unstable; urgency=low
 123
 124   * changed/added:
 125     * make libudev optional. if libudev is not available on linux, adapter
 126       autodetection will also not be available. fixes compilation on Hardy/ATV1
 127     * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET
 128       language
 129     * added vendor support for LG
 130     * added vendor support for Philips
 131     * added vendor support for Yamaha
 132     * added vendor support for Onkyo
 133     * added 'scan' command to cec-client, that displays info about devices on
 134       the bus. made all ToString() methods available on the interface.
 135     * added '-s' or '--single-command' to cec-client. starting cec-client with
 136       this parameter executes a single command in cec-client and does not power
 137       on devices on startup and power them off on exit. this way, you can use
 138       cec-client in a shell script. since there's some handshaking involved at
 139       startup, this is not very fast. to execute a command and only display the
 140       result and any error/warning, execute it with
 141       RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch
 142       files are a bit different)
 143     * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to
 144       cec-client's parameters
 145     * handle image view on and text view on
 146     * handle routing information and report physical address opcodes
 147     * handle audio status updates
 148     * send ping and bootloader commands via the output queue
 149     * scan the CEC bus for devices when starting libcec
 150     * pass all commands that are directed at libcec to listeners
 151   * interface changes:
 152     * added GetActiveSource()/cec_get_active_source()
 153     * added IsActiveSource()/cec_is_active_source()
 154     * added GetDevicePhysicalAddress()/cec_get_device_physical_address()
 155     * added GetDeviceOSDName()/cec_get_osd_name()
 156     * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/
 157       cec_send_key_release()
 158     * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(),
 159       MuteAudio()/cec_mute_audio()
 160     * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/
 161       cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type().
 162     * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load
 163       and when a device with the same physical address is detected, libcec will
 164       use the selected hdmi port on that device. should fix source selection on
 165       other devices, like an amplifier
 166     * added a hook in libcec for physical address autodetection
 167   * fixed:
 168     * don't request the physical address from the tv (it's always 0x0000)
 169     * set the proper ackmask before doing anything else
 170     * don't unlock the transmit mutex in CCECProcessor while waiting for an
 171       answer
 172     * fix device polling
 173     * refactor CEC read/write. keep a single lock for all writes, not one per
 174       device
 175     * ignore other data while waiting for a response
 176     * retry failed tranmissions
 177     * don't delete a message before it's been sent when starting the bootloader
 178     * or when sending a ping
 179     * fixed possible segfault when switching the command handler after a vendor
 180     * id changed
 181     * handle audio opcodes correctly
 182     * inactive source should be directly addressed at the TV
 183     * don't report a changed physical address when it hasn't changed
 184     * routing information sets the stream path, not the physical address
 185     * don't scan the whole bus in CCECProcessor::IsActiveDeviceType()
 186     * don't request the vendor id from devices that are handled by libcec
 187     * mark device status as present when a command was received from a device
 188     * always send a power on command in CCECBusDevice::PowerOn()
 189     * don't request updates statusses unless needed
 190     * report physical address sends 3 parameters, not 2. check whether the
 191       device type is correct
 192     * devices can send vendor commands from other vendors, so don't assume the
 193       device is of a certain vendor when it sends commands with a vendor id
 194     * thread safety fixes. bugzid: 19
 195     * clear any previous input when opening a connection to the adapter.
 196       bugzid: 54
 197     * use the correct source address in CSLCommandHandler::HandleVendorCommand()
 198     * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5
 199     * renamed enum methods. fixes potential macro collision with isset().
 200       thanks davilla
 201     * don't change the active device when receiving stream path changed
 202       messages. fixes wrong source selection when powering after the TV.
 203
 204  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 09 Dec 2011 12:16:00 +0100
 205
 206 libcec (1.2-1) unstable; urgency=low
 207
 208   * bugfixes:
 209     * pass the deck_control command to libcec listeners
 210     * check whether the initiator is valid in CCECProcessor::ParseCommand().
 211       fixes possible segfault when parsing invalid data
 212
 213  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sat, 12 Nov 2011 13:36:00 +0100
 214
 215 libcec (1.1-3) unstable; urgency=low
 216
 217   * fixed return value in CCECProcessor::SetStreamPath(), which prevented
 218     active source and menu state from being sent
 219
 220  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 23:36:00 +0100
 221
 222 libcec (1.1-2) unstable; urgency=low
 223
 224   * forgot to update the headers to v1.1
 225
 226  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 18:56:00 +0100
 227
 228 libcec (1.1-1) unstable; urgency=low
 229
 230   * interface changes:
 231     * added logical address autodetection and let libcec handle multiple types
 232       simultaniously. for logical address autodetection, you have to use
 233       CECInit()/cec_init_typed() instead of CECCreate()/cec_init()
 234     * added SetActiveSource()/cec_set_active_source() to the interface.
 235       deprecated SetActiveView()/cec_set_active_view()
 236     * added SetMenuState()
 237     * added PollDevice()/cec_poll_device()
 238     * removed duplicate method SetActiveSource() / SetActiveView()
 239     * added SetDeckControlMode() and SetDeckInfo()
 240   * fixed:
 241     * added vendor detection for panasonic and broadcast active view and set
 242       menu state when a panasonic device sets the stream path. thanks for the
 243       pointer cptcoconut.
 244     * added vendor code for pioneer
 245     * osd string is 13 chars max. don't send more
 246     * send the correct cec version for each device
 247     * switch to panasonic specific cec implementation if a panasonic device was
 248       detected
 249     * send the correct device type in TransmitPhysicalAddress()
 250     * send a reply from the correct device when the stream path is requested
 251     * opcode 0x80 means the stream path changed, not the physical address
 252     * don't poll for a vendor ID in monitoring mode
 253     * fixed parameter parsing in SetVendorId()
 254     * buffer up commands that are received while waiting for an ack. only send
 255       'active source' message for the actual active source
 256     * win32: prepend the com port path with '\\.\', so com ports > 9 can be
 257       accessed. thanks smolesen
 258     * audio systems cannot be an active source, so don't transmit active
 259       source message from this device
 260     * only send 'active source' when powered on
 261     * only set the osd name for the primary device. use default values for
 262       others
 263     * increase physical address with 0x100 per device
 264     * win32: removed unneeded afxres.h include in the resource files, which
 265       is not present when using studio express. thanks Ghuron
 266     * fixed C headers
 267     * mark the active source as active and other devices as inactive
 268     * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER
 269     * transmit the menu state as (active) when the stream path is set
 270   * changed:
 271     * changed copyright of boblight files with permission of the original
 272       author
 273     * partial handling of audio related opcodes
 274     * more consistent log messages
 275     * set a device type and name for each CCECBusDevice
 276     * keep a power and menu state per device
 277     * renamed all Broadcast...() and Report...() methods to Transmit...()
 278     * renamed SetOSDString() to TransmitOSDString()
 279     * changed debug level of 'did not receive ack' from error to debug
 280     * only set the power status to 'on' for the primary device
 281     * moved method decriptions from cecc.h to cec.h
 282     * only send a power on command when a device isn't on already and set
 283       the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while
 284       powering on
 285     * handle CEC_OPCODE_STANDBY
 286     * handle CEC_OPCODE_ACTIVE_SOURCE
 287     * always start in standby mode and let the tv (or other device) send the
 288       power on command
 289     * renamed the last few enums
 290     * handle deck related opcodes.
 291     * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown'
 292
 293  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 17:42:00 +0100
 294
 295 libcec (1.0-1) unstable; urgency=low
 296
 297   * interface changes:
 298     * set lib interface version back to 1.0 and rename GetLibVersion() to
 299       GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion()
 300     * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor
 301       version number to 1
 302   * fixed:
 303     * samsung's vendor specific remote keypresses don't send key releases. added
 304       call to AddKey() directly after the keypress
 305     * always reset the button press time in CLibCEC::AddKey()
 306     * always wait for a signal in CCECProcessor::Transmit()
 307   * changed:
 308     * drop shared_ptr and use a normal pointer. removed boost dependency
 309
 310  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 04 Nov 2011 00:14:00 +0100
 311
 312 libcec (0.8-2) unstable; urgency=low
 313
 314   * added 'libboost-dev' to build deps
 315
 316  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 01 Nov 2011 23:31:00 +0100
 317
 318 libcec (0.8-1) unstable; urgency=low
 319
 320   * interface changes:
 321     * added GetDevicePowerStatus()/cec_get_device_power_status()
 322     * added GetDeviceVendorId()/cec_get_device_vendor_id()
 323     * added GetDeviceMenuLanguage()/cec_get_device_menu_language()
 324     * added GetDeviceCecVersion()/cec_get_device_cec_version()
 325     * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when
 326       monitoring is enabled, the device will only log the data it received,
 327       but will not respond to any message
 328     * removed timeout parameter in Transmit() and included the ack timeout in
 329        the cec_command struct
 330     * made the vendor id -> vendor name translation available
 331     * made CEC_LOG levels powers of 2
 332     * introduced CEC_LOG_TRAFFIC log level
 333   * fixed:
 334     * set the correct ackmask on startup
 335     * wait for ack while keeping a lock
 336     * wait for the processor thread to start before continueing on startup
 337     * wait for messages to be transmitted before continueing in
 338       CCECProcessor::Transmit()
 339     * only set the logical address once when it has changed
 340     * correct source for broadcast messages
 341     * win32: create Release type installer
 342   * changed:
 343     * make all reads and write in CAdapterCommunication go through buffers.
 344     * poll for a vendor ID of connected devices and switch to a non-standard
 345       CEC implementation if needed.
 346     * added vendor detection of Samsung and LG devices
 347     * handle samsung remote command 'return'
 348   * cec-client:
 349     * added -la and --logical-address to the command line params
 350     * added -d and --log-level params to cec-client
 351     * added -sf and --short-log-file, which only log the actual messages, not
 352       the level and timestamp
 353     * added -f and --log-file parameters to cec-client
 354     * added option to change the log level to cec-client
 355
 356  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 01 Nov 2011 22:58:00 +0100
 357
 358 libcec (0.7-1) unstable; urgency=low
 359
 360   * send a keypress with 0 duration when a key is pressed and with a duration
 361     set when it's released
 362   * added SetOSDString() to the interface (not supported by all tvs)
 363   * fixed: 'routing change' is a broadcast message. log routing changes, but
 364     don't send a 'set active view' message, so the active input won't be
 365     changed
 366   * log keypresses in the debug log
 367   * added 'pa' command to cec-client, to change the physical address
 368   * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so
 369     the HDMI port number to use can be changed
 370   * fixed: put the message processing code from WaitForAck() in ParseMessage().
 371     fixes missing incoming message logging of non-data messages when not
 372     waiting for an ACK
 373   * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK
 374     before returning
 375   * fixed: set initiator and destination first in cec_command::push_back().
 376     fixes 'tx' command in cec-client
 377   * fixed: keep trying to connect while iTimeout isn't reached (default 10
 378     seconds). fixes exit with a 'permission denied' error when the device isn't
 379     ready yet. remove CEC_SETTLE_DOWN_TIME
 380   * fixed: don't call SetActiveView() when reporting the power status. fixes
 381     loop which causes some TVs to report failed connections
 382   * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed.
 383   * fixed: add the device type as parameter when sending the physical address.
 384     thanks bobo1on1
 385   * fixed: typo in libcec.pc.in
 386   * added optional strLib parameter to LoadLibCec(), so the location of the
 387     shared library can be specified
 388   * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB
 389   * use int instead of bool on the public C interface and remove stdbool.h include
 390   * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h =>
 391     cecloader.h, CECTypes.h => cectypes.h
 392   * updated debian package. split up libcec and libcec-dev
 393   * fixed: changed to use dlopen instead of static linkage. shuffled headers a
 394     bit. bumped interface to version 7
 395   * removed 'rt' from libraries. it's not needed (anymore)
 396   * fixed: reset the active view after a routing change. issue #1
 397   * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an
 398     error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear
 399   * added contributors link
 400
 401  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 14 Oct 2011 17:34:00 +0200
 402
 403 libcec (0.6-1) unstable; urgency=low
 404
 405   * bumped interface version to 6
 406   * fixed packet output (reporting the OSD name correctly now)
 407   * refactored packet structs: split up in cec commands and adapter messages
 408   * fixed i/o timings
 409   * added Darwin support (thanks Davilla!)
 410   * fixed WaitForAck()
 411   * fixed possible deadlock when starting a new thread
 412   * implemented vendor id and device class parsing. full detection will follow
 413   * added "on" and "standby" commands to the test client
 414   * retransmit packets if needed
 415   * fix GetTimeMs() on linux
 416   * added timestamp to log messages
 417
 418  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sun, 09 Oct 2011 15:15:00 +0200
 419
 420 libcec (0.5-1) unstable; urgency=low
 421
 422   * bumped interface version to 5
 423   * don't pass std::string and std::vector accross the interface
 424   * fixed heap corruption crashes on windows
 425   * fixed some memory leaks
 426   * reset all structs to default values before doing with them
 427
 428  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 07 Oct 2011 22:00:00 +0200
 429
 430 libcec (0.4-3) unstable; urgency=low
 431
 432   * fixed reconnect
 433   * fixed some threading related bugs
 434   * fixed deadlock on exit
 435   * fixed wrongly reported physical address
 436
 437  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 06 Oct 2011 00:19:00 +0200
 438
 439 libcec (0.4-2) unstable; urgency=low
 440
 441   * fixed int parameter sizes and some signed/unsigned warnings
 442   * check whether m_port isn't NULL in ReadFromDevice
 443   * stop the processor thread and delete the CSerialPort instance on exit
 444   * added mutex in CSerialPort
 445   * fix segfault on exit
 446   * renamed libPlatform -> platform.
 447   * stuck everything from libCEC in the CEC namespace to avoid namespace
 448     polution
 449
 450  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 04 Oct 2011 23:45:00 +0200
 451
 452 libcec (0.4-1) unstable; urgency=low
 453
 454   * bumped interface version to 4
 455   * timeout parameter removed from Close()/cec_close(). return type changed to
 456     void
 457   * added cec_destroy() method
 458   * removed timeout parameter from Transmit()
 459   * change the default argument of PowerOnDevices() to CECDEVICE_TV
 460   * removed PowerOffDevices(). use StandbyDevices() instead
 461   * removed obsolete methods from the interface
 462   * fixed bug: pthread_cond_wait was called without the mutex locked
 463   * fixed possible deadlock: don't send messages and wait for an ack with the
 464     mutex locked in CCECParser
 465   * created a separate reader thread and fixed the 'lock timeout' bug
 466   * testclient: use CECDEVICE_TV instead of the default argument
 467     (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices()
 468
 469  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 04 Oct 2011 00:48:00 +0200
 470
 471 libcec (0.3-1) unstable; urgency=low
 472
 473   * added device detection support for Windows
 474
 475  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sun, 02 Oct 2011 12:09:33 +0200
 476
 477 libcec (0.2-1) unstable; urgency=low
 478
 479   * added a Close() method to the interface
 480   * Added CEC command that were received by the adapter in a buffer that can be
 481     read by a client with GetNextCommand()/cec_get_next_command(). added a
 482     'help' command to the test client, that displays all available commands
 483   * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use
 484     SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to
 485     the testclient to set the logical address of the cec adapter
 486   * Added optional logical and physical address parameters to
 487     LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace
 488     close tag in CECExports.h. updated interface documentation. bumped
 489     interface version to 2.
 490   * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the
 491     test client. the previous one was too long and being rejected
 492
 493  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 28 Sep 2011 01:33:00 +0200
 494
 495 libcec (0.1-1) unstable; urgency=low
 496
 497   * Initial release v0.1
 498
 499  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Wed, 28 Sep 2011 23:55:48 +0200