3 * Copyright (c) 2002 Fabrice Bellard
5 * This file is part of FFmpeg.
7 * FFmpeg is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU Lesser General Public
9 * License as published by the Free Software Foundation; either
10 * version 2.1 of the License, or (at your option) any later version.
12 * FFmpeg is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * Lesser General Public License for more details.
17 * You should have received a copy of the GNU Lesser General Public
18 * License along with FFmpeg; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
21 #ifndef AVFORMAT_RTSP_H
22 #define AVFORMAT_RTSP_H
26 #include "rtspcodes.h"
31 #include "libavutil/log.h"
32 #include "libavutil/opt.h"
35 * Network layer over which RTP/etc packet data will be transported.
37 enum RTSPLowerTransport
{
38 RTSP_LOWER_TRANSPORT_UDP
= 0, /**< UDP/unicast */
39 RTSP_LOWER_TRANSPORT_TCP
= 1, /**< TCP; interleaved in RTSP */
40 RTSP_LOWER_TRANSPORT_UDP_MULTICAST
= 2, /**< UDP/multicast */
41 RTSP_LOWER_TRANSPORT_NB
,
42 RTSP_LOWER_TRANSPORT_HTTP
= 8, /**< HTTP tunneled - not a proper
43 transport mode as such,
44 only for use via AVOptions */
45 RTSP_LOWER_TRANSPORT_CUSTOM
= 16, /**< Custom IO - not a public
46 option for lower_transport_mask,
47 but set in the SDP demuxer based
52 * Packet profile of the data that we will be receiving. Real servers
53 * commonly send RDT (although they can sometimes send RTP as well),
54 * whereas most others will send RTP.
57 RTSP_TRANSPORT_RTP
, /**< Standards-compliant RTP */
58 RTSP_TRANSPORT_RDT
, /**< Realmedia Data Transport */
59 RTSP_TRANSPORT_RAW
, /**< Raw data (over UDP) */
64 * Transport mode for the RTSP data. This may be plain, or
65 * tunneled, which is done over HTTP.
67 enum RTSPControlTransport
{
68 RTSP_MODE_PLAIN
, /**< Normal RTSP */
69 RTSP_MODE_TUNNEL
/**< RTSP over HTTP (tunneling) */
72 #define RTSP_DEFAULT_PORT 554
73 #define RTSPS_DEFAULT_PORT 322
74 #define RTSP_MAX_TRANSPORTS 8
75 #define RTSP_TCP_MAX_PACKET_SIZE 1472
76 #define RTSP_DEFAULT_NB_AUDIO_CHANNELS 1
77 #define RTSP_DEFAULT_AUDIO_SAMPLERATE 44100
78 #define RTSP_RTP_PORT_MIN 5000
79 #define RTSP_RTP_PORT_MAX 65000
82 * This describes a single item in the "Transport:" line of one stream as
83 * negotiated by the SETUP RTSP command. Multiple transports are comma-
84 * separated ("Transport: x-read-rdt/tcp;interleaved=0-1,rtp/avp/udp;
85 * client_port=1000-1001;server_port=1800-1801") and described in separate
86 * RTSPTransportFields.
88 typedef struct RTSPTransportField
{
89 /** interleave ids, if TCP transport; each TCP/RTSP data packet starts
90 * with a '$', stream length and stream ID. If the stream ID is within
91 * the range of this interleaved_min-max, then the packet belongs to
93 int interleaved_min
, interleaved_max
;
95 /** UDP multicast port range; the ports to which we should connect to
96 * receive multicast UDP data. */
97 int port_min
, port_max
;
99 /** UDP client ports; these should be the local ports of the UDP RTP
100 * (and RTCP) sockets over which we receive RTP/RTCP data. */
101 int client_port_min
, client_port_max
;
103 /** UDP unicast server port range; the ports to which we should connect
104 * to receive unicast UDP RTP/RTCP data. */
105 int server_port_min
, server_port_max
;
107 /** time-to-live value (required for multicast); the amount of HOPs that
108 * packets will be allowed to make before being discarded. */
111 /** transport set to record data */
114 struct sockaddr_storage destination
; /**< destination IP address */
115 char source
[INET6_ADDRSTRLEN
+ 1]; /**< source IP address */
117 /** data/packet transport protocol; e.g. RTP or RDT */
118 enum RTSPTransport transport
;
120 /** network layer transport protocol; e.g. TCP or UDP uni-/multicast */
121 enum RTSPLowerTransport lower_transport
;
122 } RTSPTransportField
;
125 * This describes the server response to each RTSP command.
127 typedef struct RTSPMessageHeader
{
128 /** length of the data following this header */
131 enum RTSPStatusCode status_code
; /**< response code from server */
133 /** number of items in the 'transports' variable below */
136 /** Time range of the streams that the server will stream. In
137 * AV_TIME_BASE unit, AV_NOPTS_VALUE if not used */
138 int64_t range_start
, range_end
;
140 /** describes the complete "Transport:" line of the server in response
141 * to a SETUP RTSP command by the client */
142 RTSPTransportField transports
[RTSP_MAX_TRANSPORTS
];
144 int seq
; /**< sequence number */
146 /** the "Session:" field. This value is initially set by the server and
147 * should be re-transmitted by the client in every RTSP command. */
148 char session_id
[512];
150 /** the "Location:" field. This value is used to handle redirection.
154 /** the "RealChallenge1:" field from the server */
155 char real_challenge
[64];
157 /** the "Server: field, which can be used to identify some special-case
158 * servers that are not 100% standards-compliant. We use this to identify
159 * Windows Media Server, which has a value "WMServer/v.e.r.sion", where
160 * version is a sequence of digits (e.g. 9.0.0.3372). Helix/Real servers
161 * use something like "Helix [..] Server Version v.e.r.sion (platform)
162 * (RealServer compatible)" or "RealServer Version v.e.r.sion (platform)",
163 * where platform is the output of $uname -msr | sed 's/ /-/g'. */
166 /** The "timeout" comes as part of the server response to the "SETUP"
167 * command, in the "Session: <xyz>[;timeout=<value>]" line. It is the
168 * time, in seconds, that the server will go without traffic over the
169 * RTSP/TCP connection before it closes the connection. To prevent
170 * this, sent dummy requests (e.g. OPTIONS) with intervals smaller
171 * than this value. */
174 /** The "Notice" or "X-Notice" field value. See
175 * http://tools.ietf.org/html/draft-stiemerling-rtsp-announce-00
176 * for a complete list of supported values. */
179 /** The "reason" is meant to specify better the meaning of the error code
185 * Content type header
187 char content_type
[64];
191 * Client state, i.e. whether we are currently receiving data (PLAYING) or
192 * setup-but-not-receiving (PAUSED). State can be changed in applications
193 * by calling av_read_play/pause().
195 enum RTSPClientState
{
196 RTSP_STATE_IDLE
, /**< not initialized */
197 RTSP_STATE_STREAMING
, /**< initialized and sending/receiving data */
198 RTSP_STATE_PAUSED
, /**< initialized, but not receiving data */
199 RTSP_STATE_SEEKING
, /**< initialized, requesting a seek */
203 * Identify particular servers that require special handling, such as
204 * standards-incompliant "Transport:" lines in the SETUP request.
206 enum RTSPServerType
{
207 RTSP_SERVER_RTP
, /**< Standards-compliant RTP-server */
208 RTSP_SERVER_REAL
, /**< Realmedia-style server */
209 RTSP_SERVER_WMS
, /**< Windows Media server */
214 * Private data for the RTSP demuxer.
216 * @todo Use AVIOContext instead of URLContext
218 typedef struct RTSPState
{
219 const AVClass
*class; /**< Class for private options. */
220 URLContext
*rtsp_hd
; /* RTSP TCP connection handle */
222 /** number of items in the 'rtsp_streams' variable */
225 struct RTSPStream
**rtsp_streams
; /**< streams in this session */
227 /** indicator of whether we are currently receiving data from the
228 * server. Basically this isn't more than a simple cache of the
229 * last PLAY/PAUSE command sent to the server, to make sure we don't
230 * send 2x the same unexpectedly or commands in the wrong state. */
231 enum RTSPClientState state
;
233 /** the seek value requested when calling av_seek_frame(). This value
234 * is subsequently used as part of the "Range" parameter when emitting
235 * the RTSP PLAY command. If we are currently playing, this command is
236 * called instantly. If we are currently paused, this command is called
237 * whenever we resume playback. Either way, the value is only used once,
238 * see rtsp_read_play() and rtsp_read_seek(). */
239 int64_t seek_timestamp
;
241 int seq
; /**< RTSP command sequence number */
243 /** copy of RTSPMessageHeader->session_id, i.e. the server-provided session
244 * identifier that the client should re-transmit in each RTSP command */
245 char session_id
[512];
247 /** copy of RTSPMessageHeader->timeout, i.e. the time (in seconds) that
248 * the server will go without traffic on the RTSP/TCP line before it
249 * closes the connection. */
252 /** timestamp of the last RTSP command that we sent to the RTSP server.
253 * This is used to calculate when to send dummy commands to keep the
254 * connection alive, in conjunction with timeout. */
255 int64_t last_cmd_time
;
257 /** the negotiated data/packet transport protocol; e.g. RTP or RDT */
258 enum RTSPTransport transport
;
260 /** the negotiated network layer transport protocol; e.g. TCP or UDP
262 enum RTSPLowerTransport lower_transport
;
264 /** brand of server that we're talking to; e.g. WMS, REAL or other.
265 * Detected based on the value of RTSPMessageHeader->server or the presence
266 * of RTSPMessageHeader->real_challenge */
267 enum RTSPServerType server_type
;
269 /** the "RealChallenge1:" field from the server */
270 char real_challenge
[64];
272 /** plaintext authorization line (username:password) */
275 /** authentication state */
276 HTTPAuthState auth_state
;
278 /** The last reply of the server to a RTSP command */
279 char last_reply
[2048]; /* XXX: allocate ? */
281 /** RTSPStream->transport_priv of the last stream that we read a
283 void *cur_transport_priv
;
285 /** The following are used for Real stream selection */
287 /** whether we need to send a "SET_PARAMETER Subscribe:" command */
288 int need_subscription
;
290 /** stream setup during the last frame read. This is used to detect if
291 * we need to subscribe or unsubscribe to any new streams. */
292 enum AVDiscard
*real_setup_cache
;
294 /** current stream setup. This is a temporary buffer used to compare
295 * current setup to previous frame setup. */
296 enum AVDiscard
*real_setup
;
298 /** the last value of the "SET_PARAMETER Subscribe:" RTSP command.
299 * this is used to send the same "Unsubscribe:" if stream setup changed,
300 * before sending a new "Subscribe:" command. */
301 char last_subscription
[1024];
304 /** The following are used for RTP/ASF streams */
306 /** ASF demuxer context for the embedded ASF stream from WMS servers */
307 AVFormatContext
*asf_ctx
;
309 /** cache for position of the asf demuxer, since we load a new
310 * data packet in the bytecontext for each incoming RTSP packet. */
314 /** some MS RTSP streams contain a URL in the SDP that we need to use
315 * for all subsequent RTSP requests, rather than the input URI; in
316 * other cases, this is a copy of AVFormatContext->filename. */
317 char control_uri
[1024];
319 /** The following are used for parsing raw mpegts in udp */
321 struct MpegTSContext
*ts
;
326 /** Additional output handle, used when input and output are done
327 * separately, eg for HTTP tunneling. */
328 URLContext
*rtsp_hd_out
;
330 /** RTSP transport mode, such as plain or tunneled. */
331 enum RTSPControlTransport control_transport
;
333 /* Number of RTCP BYE packets the RTSP session has received.
334 * An EOF is propagated back if nb_byes == nb_streams.
335 * This is reset after a seek. */
338 /** Reusable buffer for receiving packets */
342 * A mask with all requested transport methods
344 int lower_transport_mask
;
347 * The number of returned packets
352 * Polling array for udp
357 * Whether the server supports the GET_PARAMETER method.
359 int get_parameter_supported
;
362 * Do not begin to play the stream immediately.
367 * Option flags for the chained RTP muxer.
371 /** Whether the server accepts the x-Dynamic-Rate header */
372 int accept_dynamic_rate
;
375 * Various option flags for the RTSP muxer/demuxer.
380 * Mask of all requested media types
385 * Minimum and maximum local UDP ports.
387 int rtp_port_min
, rtp_port_max
;
390 * Timeout to wait for incoming connections.
395 * timeout of socket i/o operations.
400 * Size of RTP packet reordering queue.
402 int reordering_queue_size
;
410 #define RTSP_FLAG_FILTER_SRC 0x1 /**< Filter incoming UDP packets -
411 receive packets only from the right
412 source address and port. */
413 #define RTSP_FLAG_LISTEN 0x2 /**< Wait for incoming connections. */
414 #define RTSP_FLAG_CUSTOM_IO 0x4 /**< Do all IO via the AVIOContext. */
415 #define RTSP_FLAG_RTCP_TO_SOURCE 0x8 /**< Send RTCP packets to the source
416 address of received packets. */
417 #define RTSP_FLAG_PREFER_TCP 0x10 /**< Try RTP via TCP first if possible. */
419 typedef struct RTSPSource
{
420 char addr
[128]; /**< Source-specific multicast include source IP address (from SDP content) */
424 * Describe a single stream, as identified by a single m= line block in the
425 * SDP content. In the case of RDT, one RTSPStream can represent multiple
426 * AVStreams. In this case, each AVStream in this set has similar content
427 * (but different codec/bitrate).
429 typedef struct RTSPStream
{
430 URLContext
*rtp_handle
; /**< RTP stream handle (if UDP) */
431 void *transport_priv
; /**< RTP/RDT parse context if input, RTP AVFormatContext if output */
433 /** corresponding stream index, if any. -1 if none (MPEG2TS case) */
436 /** interleave IDs; copies of RTSPTransportField->interleaved_min/max
437 * for the selected transport. Only used for TCP. */
438 int interleaved_min
, interleaved_max
;
440 char control_url
[1024]; /**< url for this stream (from SDP) */
442 /** The following are used only in SDP, not RTSP */
444 int sdp_port
; /**< port (from SDP content) */
445 struct sockaddr_storage sdp_ip
; /**< IP address (from SDP content) */
446 int nb_include_source_addrs
; /**< Number of source-specific multicast include source IP addresses (from SDP content) */
447 struct RTSPSource
**include_source_addrs
; /**< Source-specific multicast include source IP addresses (from SDP content) */
448 int nb_exclude_source_addrs
; /**< Number of source-specific multicast exclude source IP addresses (from SDP content) */
449 struct RTSPSource
**exclude_source_addrs
; /**< Source-specific multicast exclude source IP addresses (from SDP content) */
450 int sdp_ttl
; /**< IP Time-To-Live (from SDP content) */
451 int sdp_payload_type
; /**< payload type */
454 /** The following are used for dynamic protocols (rtpdec_*.c/rdt.c) */
456 /** handler structure */
457 RTPDynamicProtocolHandler
*dynamic_handler
;
459 /** private data associated with the dynamic protocol */
460 PayloadContext
*dynamic_protocol_context
;
463 /** Enable sending RTCP feedback messages according to RFC 4585 */
466 char crypto_suite
[40];
467 char crypto_params
[100];
470 void ff_rtsp_parse_line(RTSPMessageHeader
*reply
, const char *buf
,
471 RTSPState
*rt
, const char *method
);
474 * Send a command to the RTSP server without waiting for the reply.
476 * @see rtsp_send_cmd_with_content_async
478 int ff_rtsp_send_cmd_async(AVFormatContext
*s
, const char *method
,
479 const char *url
, const char *headers
);
482 * Send a command to the RTSP server and wait for the reply.
484 * @param s RTSP (de)muxer context
485 * @param method the method for the request
486 * @param url the target url for the request
487 * @param headers extra header lines to include in the request
488 * @param reply pointer where the RTSP message header will be stored
489 * @param content_ptr pointer where the RTSP message body, if any, will
490 * be stored (length is in reply)
491 * @param send_content if non-null, the data to send as request body content
492 * @param send_content_length the length of the send_content data, or 0 if
493 * send_content is null
495 * @return zero if success, nonzero otherwise
497 int ff_rtsp_send_cmd_with_content(AVFormatContext
*s
,
498 const char *method
, const char *url
,
500 RTSPMessageHeader
*reply
,
501 unsigned char **content_ptr
,
502 const unsigned char *send_content
,
503 int send_content_length
);
506 * Send a command to the RTSP server and wait for the reply.
508 * @see rtsp_send_cmd_with_content
510 int ff_rtsp_send_cmd(AVFormatContext
*s
, const char *method
,
511 const char *url
, const char *headers
,
512 RTSPMessageHeader
*reply
, unsigned char **content_ptr
);
515 * Read a RTSP message from the server, or prepare to read data
516 * packets if we're reading data interleaved over the TCP/RTSP
517 * connection as well.
519 * @param s RTSP (de)muxer context
520 * @param reply pointer where the RTSP message header will be stored
521 * @param content_ptr pointer where the RTSP message body, if any, will
522 * be stored (length is in reply)
523 * @param return_on_interleaved_data whether the function may return if we
524 * encounter a data marker ('$'), which precedes data
525 * packets over interleaved TCP/RTSP connections. If this
526 * is set, this function will return 1 after encountering
527 * a '$'. If it is not set, the function will skip any
528 * data packets (if they are encountered), until a reply
529 * has been fully parsed. If no more data is available
530 * without parsing a reply, it will return an error.
531 * @param method the RTSP method this is a reply to. This affects how
532 * some response headers are acted upon. May be NULL.
534 * @return 1 if a data packets is ready to be received, -1 on error,
537 int ff_rtsp_read_reply(AVFormatContext
*s
, RTSPMessageHeader
*reply
,
538 unsigned char **content_ptr
,
539 int return_on_interleaved_data
, const char *method
);
542 * Skip a RTP/TCP interleaved packet.
544 void ff_rtsp_skip_packet(AVFormatContext
*s
);
547 * Connect to the RTSP server and set up the individual media streams.
548 * This can be used for both muxers and demuxers.
550 * @param s RTSP (de)muxer context
552 * @return 0 on success, < 0 on error. Cleans up all allocations done
553 * within the function on error.
555 int ff_rtsp_connect(AVFormatContext
*s
);
558 * Close and free all streams within the RTSP (de)muxer
560 * @param s RTSP (de)muxer context
562 void ff_rtsp_close_streams(AVFormatContext
*s
);
565 * Close all connection handles within the RTSP (de)muxer
567 * @param s RTSP (de)muxer context
569 void ff_rtsp_close_connections(AVFormatContext
*s
);
572 * Get the description of the stream and set up the RTSPStream child
575 int ff_rtsp_setup_input_streams(AVFormatContext
*s
, RTSPMessageHeader
*reply
);
578 * Announce the stream to the server and set up the RTSPStream child
579 * objects for each media stream.
581 int ff_rtsp_setup_output_streams(AVFormatContext
*s
, const char *addr
);
584 * Parse RTSP commands (OPTIONS, PAUSE and TEARDOWN) during streaming in
587 int ff_rtsp_parse_streaming_commands(AVFormatContext
*s
);
590 * Parse an SDP description of streams by populating an RTSPState struct
591 * within the AVFormatContext; also allocate the RTP streams and the
592 * pollfd array used for UDP streams.
594 int ff_sdp_parse(AVFormatContext
*s
, const char *content
);
597 * Receive one RTP packet from an TCP interleaved RTSP stream.
599 int ff_rtsp_tcp_read_packet(AVFormatContext
*s
, RTSPStream
**prtsp_st
,
600 uint8_t *buf
, int buf_size
);
603 * Send buffered packets over TCP.
605 int ff_rtsp_tcp_write_packet(AVFormatContext
*s
, RTSPStream
*rtsp_st
);
608 * Receive one packet from the RTSPStreams set up in the AVFormatContext
609 * (which should contain a RTSPState struct as priv_data).
611 int ff_rtsp_fetch_packet(AVFormatContext
*s
, AVPacket
*pkt
);
614 * Do the SETUP requests for each stream for the chosen
615 * lower transport mode.
616 * @return 0 on success, <0 on error, 1 if protocol is unavailable
618 int ff_rtsp_make_setup_request(AVFormatContext
*s
, const char *host
, int port
,
619 int lower_transport
, const char *real_challenge
);
622 * Undo the effect of ff_rtsp_make_setup_request, close the
623 * transport_priv and rtp_handle fields.
625 void ff_rtsp_undo_setup(AVFormatContext
*s
, int send_packets
);
628 * Open RTSP transport context.
630 int ff_rtsp_open_transport_ctx(AVFormatContext
*s
, RTSPStream
*rtsp_st
);
632 extern const AVOption ff_rtsp_options
[];
634 #endif /* AVFORMAT_RTSP_H */