+libcec (1.5-2) unstable; urgency=low
+
+ * changed/added:
+ * added Toshiba's vendor id, and set the device ID of the primary device to
+ Toshiba's and transmit it when starting
+ * lock in SyncedBuffer
+ * added a timeout to StopThread()
+ * also add commands to unsupported features when receiving
+ CEC_ABORT_REASON_REFUSED
+ * cec-config-gui: set cbPortNumber enabled when the physical address
+ override isn't checked instead
+ * cec-config-gui: added support for the new 'send inactive source' setting
+
+ * interface changes:
+ * added an 'send inactive source' option to libcec_configuration, only
+ supported by client/server 1.5.1 and up. bugzid: 439
+ * added a command to the interface to start the bootloader directly,
+ without going through all checks. bugzid: 218
+ * LibCecSharp: implemented support for the new 'send inactive source'
+ setting
+
+ * fixed:
+ * don't send an updated configuration when libCEC hasn't been initialised
+ fully. bugzid: 459
+ * don't send an updated configuration back when initialising. let the
+ client call the GetCurrentConfiguration() method. bugzid: 459
+ * configuration updates from libCEC. bugzid: 459
+ * fixed accidental double deref. the method parameter already does that.
+ github #24
+ * use CLOCK_MONOTONIC for timing info, since gettimeofday is affected by
+ ntp and by manually adjusting the system time
+ * the timeout value of pthread_cond_timedwait has to be referenced to
+ CLOCK_REALTIME
+ * don't add data to the input buffer in CUSBCECAdapterCommunication before
+ it's fully initialised
+ * fixed return value of CUSBCECAdapterCommunication::ParseMessage(). fixes
+ messages not being parsed in certain occasions
+ * don't try to transmit when the processor is being stopped
+ * set the server version in the LibCEC's constructor, since this is
+ checked by clients. fixes 'invalid libCEC version' popup when inserting
+ the adapter
+ * don't wait for the full timeout to pass in CCECProcessor::
+ OpenConnection(), but retry to connect 2 times. fixes 'port busy' errors
+ when initialising libCEC. bugzid: 436
+ * use the correct Sleep() method in CCECProcessor::OpenConnection(). the
+ thread hasn't been started there yet, so the sleep wasn't working. fixes
+ 'device or resource busy' when plugging in the adapter. bugzid: 436
+ * check the adapter ping and firmware before starting the reader thread, so
+ we really leave the com port alone for a second when it fails because of
+ a busy error. bugzid: 436
+ * ensure that the connection is really closed before retrying to connect.
+ bugzid: 436
+ * LibCecSharp: recreate the delegates properly when (re)connecting to
+ LibCecSharp
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 28 Feb 2012 21:19:00 +0100
+
libcec (1.5-1) unstable; urgency=low
* changed/added:
* a new libcec_configuration structs, which allows the client app to pass
- a number of new options, like waking multiple devices on startup,
- overriding the vendor id, etc.
- * a new configuration GUI for Windows (.NET). this allows you to set
- libCEC's configuration for XBMC in a convenient GUI.
- * a CLI configuration tool (unfinished) for other platforms. will be
- finished in an update.
+ a number of new options, like waking multiple devices on startup,
+ overriding the vendor id, etc.
+ * a new configuration GUI for Windows (.NET). this allows you to set
+ libCEC's configuration for XBMC in a convenient GUI.
+ * a CLI configuration tool (unfinished) for other platforms. will be
+ finished in an update.
* implemented power up for LG devices other than a TV
- * win32: don't install libcec to the system directory by default, and
- delete previous (testing) copies if present
- * wait for multiple responses, not just for one at a time
- * set the ackmask to 0 when closing the connection
- * don't send 'image view on' when calling SetActiveSource()
- * don't send power on, acitve source and standby commands by default in
- cec-client
- * platform: added CTryLockObject
- * platform: added an Init() method in CTimeout, so it can be reset
-
+ * win32: don't install libcec to the system directory by default, and
+ delete previous (testing) copies if present
+ * wait for multiple responses, not just for one at a time
+ * set the ackmask to 0 when closing the connection
+ * don't send 'image view on' when calling SetActiveSource()
+ * don't send power on, acitve source and standby commands by default in
+ cec-client
+ * platform: added CTryLockObject
+ * platform: added an Init() method in CTimeout, so it can be reset
+
* interface changes:
* added a new initialiser method: CecInitialise()/cec_initialise(), that
- accepts a "libc_configuration" struct as parameter. this way, the
- signature of the init method can stay the same when adding new options.
- in LibCecSharp, the new method appears as a new constructor.
- * added CanPersistConfiguration()/cec_can_persist_configuration()
- * added PersistConfiguration()/cec_persist_configuration()
+ accepts a "libc_configuration" struct as parameter. this way, the
+ signature of the init method can stay the same when adding new options.
+ in LibCecSharp, the new method appears as a new constructor.
+ * added CanPersistConfiguration()/cec_can_persist_configuration()
+ * added PersistConfiguration()/cec_persist_configuration()
* added GetCurrentConfiguration()/cec_get_current_configuration()
- * added SetConfiguration()/cec_set_configuration()
+ * added SetConfiguration()/cec_set_configuration()
* added GetLogicalAddresses()/cec_get_logical_addresses(): returns the list
- of addresses controlled by libCEC
+ of addresses controlled by libCEC
* added RescanDevices()/cec_rescan_devices(): lets libCEC force polls to
- all logical addresses.
- * added a callback that is called when libCEC's configuration changed.
- * moved the autodetect address api call to libcec_configuration. only send
- power up commands to non-tv devices when the power state is not
- on/transition->on. let players call the power up/power down command.
- * return the anynet return keycode directly instead of translating it to
- 'return' for v1.5.0+ clients
- * extracted CecSharpTypes.h in LibCecSharp. LibCecSharp is now in the
- CecSharp namespace
+ all logical addresses.
+ * added a callback that is called when libCEC's configuration changed.
+ * moved the autodetect address api call to libcec_configuration. only send
+ power up commands to non-tv devices when the power state is not
+ on/transition->on. let players call the power up/power down command.
+ * return the anynet return keycode directly instead of translating it to
+ 'return' for v1.5.0+ clients
+ * extracted CecSharpTypes.h in LibCecSharp. LibCecSharp is now in the
+ CecSharp namespace
* include the local cectypes.h in cec.h and cecc.h instead of system wide
- * deprecated GetLibVersion() methods. use libcec_configuration instead
- * removed deprecated CECCreate() method
+ * deprecated GetLibVersion() methods. use libcec_configuration instead
+ * removed deprecated CECCreate() method
* fixed:
* fixed a lot of LG specific issues
- * fixed OS-X compilation. credits: Dustin Cooper
+ * fixed OS-X compilation. credits: Dustin Cooper
* fixed a couple of possible deadlocks, e.g. when closing the connection
- while receiving data
- * cleaned up existing code
+ while receiving data
+ * cleaned up existing code
* libCEC no longer puts incoming data in a fifo buffer, but tries to
- process it directly, which fixes issues like libCEC blocking processing
- new commands while waiting for transmission acks.
- * 'unsupported command' marking in CCECBusDevice
- * ensure that the ackmask is always set to 0 when closing the connection
- and that the call doesn't block the Close() call
- * don't try to read or write in CUSBCECAdapterCommunication when the
- connection has been closed
- * LibCecSharp: added quotes to the linker statement for libcec.lib. fixes
- compilation in paths with spaces. closes #20
- * LibCecSharp: set the callback methods in libcec to NULL before closing
- the connection, since these might already have been destroyed in .NET
- * LibCecSharp: delete the internal callback struct when closing the
- connection
- * LibCecSharp: pass correctly formatted logical address lists
- * ensure that the vendor id is requested first when requesting info from a
- device, so we are using the correct handler
- * keep the 'busy state' of the command handler in CCECBusDevice
- * poll the next device when the current is handled by libCEC.
- * check the vendor id of a device before sending a power on command
- * ensure that there always is at least one device type set
- * transmit a keypress and key release as power on command when the target
- device isn't the TV
- * don't do a full reinit when not needed
- * fix active source switches for the standard CEC implementation
- * ensure that we don't send data to ourself
- * check whether the port is open, not whether libCEC is initialised in
- Transmit()
- * platform: fixed return value from CCondition::Wait()
- * platform: don't broadcast but wake one thread in
- CProtectedSocket::MarkReady()
- * platform: include stdint.h in windows/os-types.h instead of typedef'ing
- ints
- * platform: fixed tcp socket error handling and return value.
- * platform: fixed return values of socket operations in lib/platform
+ process it directly, which fixes issues like libCEC blocking processing
+ new commands while waiting for transmission acks.
+ * 'unsupported command' marking in CCECBusDevice
+ * ensure that the ackmask is always set to 0 when closing the connection
+ and that the call doesn't block the Close() call
+ * don't try to read or write in CUSBCECAdapterCommunication when the
+ connection has been closed
+ * LibCecSharp: added quotes to the linker statement for libcec.lib. fixes
+ compilation in paths with spaces. closes #20
+ * LibCecSharp: set the callback methods in libcec to NULL before closing
+ the connection, since these might already have been destroyed in .NET
+ * LibCecSharp: delete the internal callback struct when closing the
+ connection
+ * LibCecSharp: pass correctly formatted logical address lists
+ * ensure that the vendor id is requested first when requesting info from a
+ device, so we are using the correct handler
+ * keep the 'busy state' of the command handler in CCECBusDevice
+ * poll the next device when the current is handled by libCEC.
+ * check the vendor id of a device before sending a power on command
+ * ensure that there always is at least one device type set
+ * transmit a keypress and key release as power on command when the target
+ device isn't the TV
+ * don't do a full reinit when not needed
+ * fix active source switches for the standard CEC implementation
+ * ensure that we don't send data to ourself
+ * check whether the port is open, not whether libCEC is initialised in
+ Transmit()
+ * platform: fixed return value from CCondition::Wait()
+ * platform: don't broadcast but wake one thread in
+ CProtectedSocket::MarkReady()
+ * platform: include stdint.h in windows/os-types.h instead of typedef'ing
+ ints
+ * platform: fixed tcp socket error handling and return value.
+ * platform: fixed return values of socket operations in lib/platform
* platform: added predicate in CCondition
- * deleted the signed driver from the tree, since that doesn't work. let the
- installer create a new signed driver on the production build system
+ * deleted the signed driver from the tree, since that doesn't work. let the
+ installer create a new signed driver on the production build system
-- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 19 Feb 2012 01:04:00 +0100