+libcec (2.1.4-2) unstable; urgency=low
+
+ * fixed:
+ * OS X build
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Dec 2013 02:14:00 +0100
+
+libcec (2.1.4-1) unstable; urgency=low
+
+ * changed / added:
+ * set the vendor id of devices handled by libCEC to our vendor id
+ * added protection against standby without a notification from XBMC and
+ clock changes. issue #186
+ * update system audio mode when audio system devices are activated
+ * added vendor id and name 'Harman/Kardon'
+ * added vendor id and name 'Marantz'
+ * cec-tray: support for away mode
+ * cec-tray: support for screensaver events
+ * fixed:
+ * fixed potential crash when SendCommand returns NULL
+ * fixed crash when CCECProcessor::Transmit was called after
+ CCECProcessor::Close
+ * always call the SourceActivated() callback in
+ CCECBusDevice::MarkAsActiveSource(), even when we were already active,
+ and let clients handle dupes. this prevented the screensaver from
+ being cancelled in XBMC
+ * send our vendor id when the tv sends it's vendor id
+ * transmit our physical address when the TV sends it's physical address
+ * potential deadlock
+ * leak on exit in CWaitForResponse::Clear()
+ * also transmit an active source message as response to a set stream path
+ command when we were already marked as active. bugzid: 3116
+ * only send an active source message when receiving a routing change to an
+ address handled by libCEC. issue #56
+ * HandleVendorRemoteButtonUp -> HandleUserControlRelease for all vendors
+ * silence warning for xx:a0:00:09:b0:00:80:20. bugzid: 2559
+ * fixed comboKeyTimeout=0. closes #168
+ * Panasonic: doesn't request the active source status when powered up, but
+ it does send a vendor command. send an active source message when we're
+ marked as active source after receiving this command. issue #192
+ * possible crash when the tv does not respond to polls and the client isn't
+ registered yet. don't poll the tv in monitoring mode. closes #163
+ * Panasonic: standby command
+ * Panasonic: silence 'unmapped code' warning. bugzid: 2375
+ * LG: clean up and attempt to fix issue #176
+ * LG: newer firmwares don't send a second power status request after it's
+ been requested once and replied with 'standby -> on' like previous
+ versions. send an active source message in an attempt to fix this. issue:
+ #176
+ * Sharp: check whether the 'auto power on' option is disabled and tell the
+ user how to enable it
+ * Samsung: respond to vendor command 0x23 sent by samsung. attempt to fix
+ bugzid: 2164
+ * cec-client: try to reconnect when the connection was lost
+ * cec-tray: crash on load (MissingManifestResourceException)
+ * cec-tray: crash or deadlock on exit
+ * cec-tray: crash when the connection to the adapter was lost
+ * cec-tray: display TV not responding warning on top
+ * windows: build libCEC and cec-client against toolset v100 (VS2010)
+ * FreeBSD: proper the adapter detection. credits @fneufneu
+ * suppress mangling warning. credits @warped-rudi. closes #190
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 13 Dec 2013 16:02:00 +0100
+
+libcec (2.1.3-1) unstable; urgency=low
+
+ * changed / added:
+ * ask users to send an email when receiving an unhandled vendor command
+ * toshiba: map top menu and dvd menu buttons. closes #148
+ * LibCecSharp: sync alert types
+ * LibCecSharp: added CurrentVersion to the version enum
+ * CecSharpClient: use CurrentVersion instead of a hardcoded version
+ * CecTray: power management
+ * CecTray: split up asyncform
+ * CecTray: try/catch xml exceptions when reading the xml config. bugzid:
+ 2082
+ * CecTray: use CurrentVersion instead of a hardcoded version
+ * CecTray: display a warning if we can't poll the TV
+ * CecTray: display alerts from libCEC
+ * CecTray: don't use lazy loading for the main controller, but pass the
+ instance. bugzid: 2082
+ * windows: converted to vs2012
+ * fixed:
+ * toshiba: toshiba handler wasn't initialised, and toshiba uses more than
+ one vendor id
+ * libCEC marked itself as inactive source when the stream path changed to
+ a device with a different physical address. bugzid: 2157
+ * TDA995x: report proper firmware revision (credits: @warped-rudi)
+ * TDA995x: avoid callback when already stopped (credits: @warped-rudi)
+ * windows: fix resource files and backwards compat dll names
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 11 May 2013 10:06:00 +0000
+
+libcec (2.1.1-1) unstable; urgency=low
+
+ * changed / added:
+ * send an alert when the TV does not respond to polls
+ * fixed:
+ * LG didn't switch sources after the TV powered up
+ * always poll a device when the status is unknown, and don't try to
+ determine whether it needs to be polled by checking the status of other
+ devices
+ * don't mark a device as inactive when receiving a routing change message,
+ only when another device was made acive. fixes the issue that rc
+ passthrough doesn't work when a tv sends a quick routing change to
+ another port before requesting the active source when coming out of
+ standby
+ * LibCecSharp: fixed 14 char long OSD name (wasn't \0 terminated)
+ * LibCecSharp: fixed return value of GetActiveDevices(). issue #131
+ * cec-tray: fixed index out of range exception in CECSettingNumeric.cs.
+ bugzid: 2082
+ * cec-tray: ensure that the tray app only initialises once. bugzid: 2082
+ * rpi: don't set the physical address to 1.0.0.0 when receiving
+ VC_HDMI_UNPLUGGED. it may wake up device when they were just sent to
+ standby. issue #142
+ * osx: use the correct dylib name in cecloader.h, used by cec-client
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 8 Mar 2013 17:21:00 +0100
+
+ libcec (2.1.0-1) unstable; urgency=low
+
+ * changed / added:
+ * added vendor id for Denon
+ * added DetectAdapters() method, that returns all device information for
+ detected adapters, not just the com port
+ * added new method PowerOnScreensaver. credits: @jmarcet
+ * LibCECTray: Added ability to send modifiers by nesting commands in
+ KeyInput.cs. credits: Nate Burr
+ * rpi: Added /opt/vc/include/interface/vmcs_host/linux to rpi_cflags to fix
+ building on 'next' firmware branch. credits: Nedim Lisica
+ * fixed:
+ * don't send two active source message sequences to philips. issue #118
+ * don't send deck status updates to philips when activating the source
+ * update the active source status correctly after a manual switch to
+ another source. closes #124
+ * rename cec_audio_status() to cec_audio_get_status() to avoid conflict
+ with the cec_audio_status enum. This makes the C API compile again.
+ credits: Dave Chapman
+ * LibCECTray: Fixed bug with libcec adding the keyup for button commands
+ and making sure they are still executed. credits: Nate Burr
+ * rpi: register callback for HPD. re-read the physical address when we
+ received VC_HDMI_ATTACHED. issue #109
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 26 Feb 2013 23:06:00 +0100
+
+libcec (2.0.5-1) unstable; urgency=low
+
+ * changed:
+ * also try polls at least twice when it failed
+ * added methods to get the audiostatus and toggle the mute status from the
+ amplifier (if connected)
+ * added comboKey and iComboKeyTimeoutMs to libcec_configuration
+ * force cec_user_control_code_unknown to 0xFF
+ * fixed:
+ * check unsupported features properly
+ * only send an active source message when the stream path changed and we
+ weren't the active source yet
+ * don't mark as inactive source on routing changes
+ * press & hold
+ * never mark user control opcodes as unsupported
+ * report our OSD name to the TV, since some TVs don't request it
+ * initial audiostatus value
+ * don't log a no longer relevant FIXME
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 6 Dec 2012 20:58:00 +0100
+
+libcec (2.0.4-1) unstable; urgency=low
+
+ * changed:
+ * dropped obsolete cec-config
+ * added CEC_CLIENT_VERSION_CURRENT and CEC_SERVER_VERSION_CURRENT. closes
+ #88
+ * support colon separated data for the 'tx' command in cec-client
+ * mark the adapter as (in)active source for firmware v3+
+ * added 'is' command to cec-client, to mark libCEC as inactive source
+ * fixed:
+ * only change the handler of the primary device if the tv has a quirks mode
+ not for other devices
+ * send an active source message when the route was set to the physical
+ address that is handled by libCEC
+ * default double tap timeout wasn't set for panasonic
+ * philips TVs sometimes keep sending key presses without key releases
+ * philips TVs ignore 'image view on' right after they were sent into
+ standby. check the power status of the tv every 5 seconds, until it
+ reports to have powered on
+ * mark a device as powered on when receiving a stream path or routing
+ change
+ * update the active source status correctly on stream path changes
+ * ensure that we only send 'image view on' when needed
+ * mark the TV as 'in transition standby -> on' after sending
+ 'image view on', so we don't spam the TV with 'image view on' command
+ while waiting for it to finish powering up. bugzid: 1603. bugzid: 1609.
+ bugzid: 1592
+ * request the active source before requesting device information in
+ cec-client, or it'll display incorrect information when called the first
+ time
+ * update the value of CCECProcessor::m_bMonitor when registering a client.
+ SetControlled() wasn't called on exit, so it took 30 seconds until it was
+ auto-enabled
+ * silence 'unused' warning properly. closes #86
+ * only change the type of the client to 'playback device' instead of
+ 'recorder' for panasonic if the TV is a panasonic. issue #84
+ * always poll the TV if it's marked as not present. issue #83. issue #84
+ * only set m_iCurrentButton when the duration isn't known yet. fixes
+ duplicate key press for vendor remote codes. closes #81
+ * delete the right registry key
+ * send active source message when we received a routing change with a
+ device that is handled by libCEC as address. issue #89
+ * return value wasn't updated in GetLogicalAddresses()
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 15 Nov 2012 02:26:00 +0100
+
+libcec (2.0.3-1) unstable; urgency=low
+
+ * changed:
+ * log unhandled vendor remote keycodes in the log, so they get logged
+ without debugging enabled
+ * double tap timeout increased from 200ms to 250ms
+ * CuBox/NXP* renamed to TDA995x*
+ * fixed:
+ * handling of active route changes. github issue #56 and issue #58
+ * new combo key handling broke samsung's vendor specific remote buttons.
+ github issue #54
+ * don't try to set controlled mode when using firmware version 1 and crash.
+ github issue #76
+ * fix for LG models that send a vendor key up after a normal key down.
+ github issue #71
+ * some TVs send keypresses to us without making us the active source. mark
+ us as active source when this happens. github issue #71
+ * LG doesn't send routing changes, and marks the TV as active source when
+ switching to another source that's not been selected in the simplink menu
+ instead. this change keeps libCEC marked as powered on and keep the deck
+ state set to CEC_DECK_INFO_OTHER_STATUS_LG. fixes keypresses not working
+ after switching to another source and back to libCEC's hdmi port via the
+ source select menu instead of the simplink menu. github issue #71
+ * don't respond with an abort message when receiving a vendor remote button
+ command
+ * respond with CEC_ABORT_REASON_INVALID_OPERAND when receiving a keypress
+ without a parameter
+ * typo in stop+pause combo key that prevented one of the keys from working
+ * rpi: log what data we received exactly when we receive an response from
+ the pi's firmware that doesn't match any command that we sent. issue #77
+ * cubox: added adapter ID interface
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 31 Oct 2012 15:57:00 +0100
+
+libcec (2.0.2-2) unstable; urgency=medium
+
+ * fixed:
+ * updating the device status after a poll was broken and could reset the
+ status of devices that were marked as handled by libCEC to 'not
+ present'
+ * don't keep spamming the bus with a vendor command when an active source
+ switch is pending for panasonic, but only send it when needed
+ * reset CVLCommandHandler::m_bCapabilitiesSent when the TV goes to standby
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 15 Oct 2012 13:52:00 +0100
+
+libcec (2.0.2-1) unstable; urgency=low
+
+ * changed/added:
+ * missing from the previous changelog: added support for the CuBox TDA995x
+ credits: warped-rudi
+ * lower retry timeout for source switches
+ * cec-client: wait for the source switch to finish when cec-client is
+ called with the -s switch
+ * request the power status of the TV directly after registering a new
+ client
+ * fixed:
+ * don't keep trying to send 'image view on' commands to the TV when no TV
+ is connected, and just send the 'set active source' command. fixes source
+ switch and debug log spam for people without a TV connected
+ * don't keep waiting for an updated power status from the TV for Panasonic,
+ but request a status update once every 5 seconds, or we can possibly wait
+ forever for the tv to send it
+ * log what we received exactly when logging FIXME
+ * typo in CVLCommandHandler::VendorPreActivateSourceHook. bugzid: 1087
+ * if we failed to get the physical address of the device that we are
+ connected to in the config, then try to use the address that was
+ persisted in the eeprom before resetting to the default value, 1.0.0.0.
+ closes #50.
+ * don't update the device status of unregistered/broadcast
+ * log all device status changes
+ * CCECClient::IsLibCECActiveSource returns false now while the active
+ source command is pending
+ * log failed acks and other errors in the debug log again
+ * don't send 'image view on' when the TV is already powering up
+ * reset the delayed source switch timeout properly, so we don't spam
+ commands every second
+ * don't change the device status when sending a delayed source switch
+ * don't send out commands to a device that is marked as not present or
+ handled by libCEC
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 11 Oct 2012 15:48:00 +0100
+
+libcec (2.0.1-1) unstable; urgency=low
+
+ * changed/added:
+ * added Loewe support
+ * added signal handlers to client applications
+ * Documentation updated
+ * replaced cec-config-gui by libCEC tray
+ * log the exact data for failed transmissions, not the opcode
+ * don't log every frame, unless debugging was enabled in ./configure or
+ visual studio
+ * changed some log levels from NOTICE to DEBUG, so the non-debugging output
+ is less spammy
+ * interface changes:
+ * WARNING: breaking API changes
+ * clean up: deprecated methods and fields removed
+ * callback parameters changed to fix plain C compilation
+ * added GetAdapterProductId()+GetAdapterVendorId()/
+ cec_get_adapter_product_id()+cec_get_adapter_vendor_id()
+ * added iDoubleTapTimeoutMs to libcec_configuration
+ * remove all pre-v2.0 compatibility checks
+ * fixed:
+ * fix plain C compilation
+ * prevent sending directly addressed commands from being sent to broadcast
+ * don't wait for a response when sending a reply, so we don't block message
+ handling
+ * message response signaling and logging
+ * prevent double taps by not sending the same key press twice within 200ms
+ * fall back to the primary client when
+ CCECProcessor::HandleLogicalAddressLost() and no client could be found
+ * no more delay up to 2 seconds when exiting libCEC
+ * don't get caught in a loop in CVLCommandHandler when the source switch
+ was not allowed and no power status request was sent
+ * always send image view on to the tv, don't check the power status
+ * only respond to vendor commands for panasonic if we are the destination
+ * rpi: current firmware first sends a change to logical address 'broadcast'
+ and then signals us that the address was lost. libCEC then failed to
+ re-register, because it didn't know any client at this address
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 8 Oct 2012 21:30:00 +0100
+
+libcec (1.9.1-1) unstable; urgency=low
+
+ * changed/added:
+ * added the type of adapter to libcec_configuration,
+ and display the type in cec-client -l
+ * added device detection support for composite usb devices on windows.
+ needs the windows ddk, and it's expected to be found in
+ C:\WinDDK\7600.16385.1
+
+ * interface changes:
+ * adapter type was added to libcec_configuration
+ * moved cec_adapter_messagecode from cectypes.h to USBCECAdapterMessage.h
+
+ * fixed:
+ * retry m_port->Read(..) if an EINTR errror occurs instead of closing the
+ connection. credits @Obruni. closes #38
+ * make cec-client include cecloader.h from our project, not from system
+ * fixed duplicate entries check in CUSBCECAdapterDetection
+ * fixed missing cec_version updates in libcec_configuration
+ * transmit an active source message after <set stream path> to a device
+ that's handled by libCEC. closes #43
+ * rpi: handle vendor specific remote control presses. closes #42
+ * rpi: handle VC_CEC_LOGICAL_ADDR_LOST, sent by the Pi's firmware when
+ the logical address was taken while CEC was being reinitialised
+ * panasonic: send out an active source message when the tv started up
+ because it sometimes doesn't request this
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 5 Sep 2012 16:54:00 +0100
+