+libcec (2.0.5-1) unstable; urgency=low
+
+ * changed:
+ * also try polls at least twice when it failed
+ * added methods to get the audiostatus and toggle the mute status from the
+ amplifier (if connected)
+ * added comboKey and iComboKeyTimeoutMs to libcec_configuration
+ * force cec_user_control_code_unknown to 0xFF
+ * fixed:
+ * check unsupported features properly
+ * only send an active source message when the stream path changed and we
+ weren't the active source yet
+ * don't mark as inactive source on routing changes
+ * press & hold
+ * never mark user control opcodes as unsupported
+ * report our OSD name to the TV, since some TVs don't request it
+ * initial audiostatus value
+ * don't log a no longer relevant FIXME
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 6 Dec 2012 20:58:00 +0100
+
+libcec (2.0.4-1) unstable; urgency=low
+
+ * changed:
+ * dropped obsolete cec-config
+ * added CEC_CLIENT_VERSION_CURRENT and CEC_SERVER_VERSION_CURRENT. closes
+ #88
+ * support colon separated data for the 'tx' command in cec-client
+ * mark the adapter as (in)active source for firmware v3+
+ * added 'is' command to cec-client, to mark libCEC as inactive source
+ * fixed:
+ * only change the handler of the primary device if the tv has a quirks mode
+ not for other devices
+ * send an active source message when the route was set to the physical
+ address that is handled by libCEC
+ * default double tap timeout wasn't set for panasonic
+ * philips TVs sometimes keep sending key presses without key releases
+ * philips TVs ignore 'image view on' right after they were sent into
+ standby. check the power status of the tv every 5 seconds, until it
+ reports to have powered on
+ * mark a device as powered on when receiving a stream path or routing
+ change
+ * update the active source status correctly on stream path changes
+ * ensure that we only send 'image view on' when needed
+ * mark the TV as 'in transition standby -> on' after sending
+ 'image view on', so we don't spam the TV with 'image view on' command
+ while waiting for it to finish powering up. bugzid: 1603. bugzid: 1609.
+ bugzid: 1592
+ * request the active source before requesting device information in
+ cec-client, or it'll display incorrect information when called the first
+ time
+ * update the value of CCECProcessor::m_bMonitor when registering a client.
+ SetControlled() wasn't called on exit, so it took 30 seconds until it was
+ auto-enabled
+ * silence 'unused' warning properly. closes #86
+ * only change the type of the client to 'playback device' instead of
+ 'recorder' for panasonic if the TV is a panasonic. issue #84
+ * always poll the TV if it's marked as not present. issue #83. issue #84
+ * only set m_iCurrentButton when the duration isn't known yet. fixes
+ duplicate key press for vendor remote codes. closes #81
+ * delete the right registry key
+ * send active source message when we received a routing change with a
+ device that is handled by libCEC as address. issue #89
+ * return value wasn't updated in GetLogicalAddresses()
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 15 Nov 2012 02:26:00 +0100
+
+libcec (2.0.3-1) unstable; urgency=low
+
+ * changed:
+ * log unhandled vendor remote keycodes in the log, so they get logged
+ without debugging enabled
+ * double tap timeout increased from 200ms to 250ms
+ * CuBox/NXP* renamed to TDA995x*
+ * fixed:
+ * handling of active route changes. github issue #56 and issue #58
+ * new combo key handling broke samsung's vendor specific remote buttons.
+ github issue #54
+ * don't try to set controlled mode when using firmware version 1 and crash.
+ github issue #76
+ * fix for LG models that send a vendor key up after a normal key down.
+ github issue #71
+ * some TVs send keypresses to us without making us the active source. mark
+ us as active source when this happens. github issue #71
+ * LG doesn't send routing changes, and marks the TV as active source when
+ switching to another source that's not been selected in the simplink menu
+ instead. this change keeps libCEC marked as powered on and keep the deck
+ state set to CEC_DECK_INFO_OTHER_STATUS_LG. fixes keypresses not working
+ after switching to another source and back to libCEC's hdmi port via the
+ source select menu instead of the simplink menu. github issue #71
+ * don't respond with an abort message when receiving a vendor remote button
+ command
+ * respond with CEC_ABORT_REASON_INVALID_OPERAND when receiving a keypress
+ without a parameter
+ * typo in stop+pause combo key that prevented one of the keys from working
+ * rpi: log what data we received exactly when we receive an response from
+ the pi's firmware that doesn't match any command that we sent. issue #77
+ * cubox: added adapter ID interface
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 31 Oct 2012 15:57:00 +0100
+
+libcec (2.0.2-2) unstable; urgency=medium
+
+ * fixed:
+ * updating the device status after a poll was broken and could reset the
+ status of devices that were marked as handled by libCEC to 'not
+ present'
+ * don't keep spamming the bus with a vendor command when an active source
+ switch is pending for panasonic, but only send it when needed
+ * reset CVLCommandHandler::m_bCapabilitiesSent when the TV goes to standby
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 15 Oct 2012 13:52:00 +0100
+
+libcec (2.0.2-1) unstable; urgency=low
+
+ * changed/added:
+ * missing from the previous changelog: added support for the CuBox TDA995x
+ credits: warped-rudi
+ * lower retry timeout for source switches
+ * cec-client: wait for the source switch to finish when cec-client is
+ called with the -s switch
+ * request the power status of the TV directly after registering a new
+ client
+ * fixed:
+ * don't keep trying to send 'image view on' commands to the TV when no TV
+ is connected, and just send the 'set active source' command. fixes source
+ switch and debug log spam for people without a TV connected
+ * don't keep waiting for an updated power status from the TV for Panasonic,
+ but request a status update once every 5 seconds, or we can possibly wait
+ forever for the tv to send it
+ * log what we received exactly when logging FIXME
+ * typo in CVLCommandHandler::VendorPreActivateSourceHook. bugzid: 1087
+ * if we failed to get the physical address of the device that we are
+ connected to in the config, then try to use the address that was
+ persisted in the eeprom before resetting to the default value, 1.0.0.0.
+ closes #50.
+ * don't update the device status of unregistered/broadcast
+ * log all device status changes
+ * CCECClient::IsLibCECActiveSource returns false now while the active
+ source command is pending
+ * log failed acks and other errors in the debug log again
+ * don't send 'image view on' when the TV is already powering up
+ * reset the delayed source switch timeout properly, so we don't spam
+ commands every second
+ * don't change the device status when sending a delayed source switch
+ * don't send out commands to a device that is marked as not present or
+ handled by libCEC
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 11 Oct 2012 15:48:00 +0100
+