+
+int CVLCommandHandler::HandleDeviceVendorCommandWithId(const cec_command &command)
+{
+ if (command.parameters[0] != 0x00 ||
+ command.parameters[1] != 0x80 ||
+ command.parameters[2] != 0x45)
+ return CEC_ABORT_REASON_INVALID_OPERAND;
+
+ // XXX this is also sent when the TV is powered off
+#if 0
+ if (command.initiator == CECDEVICE_TV &&
+ command.parameters.At(3) == VL_UNKNOWN1)
+ {
+ // set the power up event time
+ {
+ CLockObject lock(m_mutex);
+ if (m_iPowerUpEventReceived == 0)
+ m_iPowerUpEventReceived = GetTimeMs();
+ }
+ // mark the TV as powered on
+ m_processor->GetTV()->SetPowerStatus(CEC_POWER_STATUS_ON);
+ }
+ else
+#endif
+ if (command.initiator == CECDEVICE_TV &&
+ command.destination == CECDEVICE_BROADCAST &&
+ command.parameters.At(3) == VL_POWER_CHANGE)
+ {
+ if (command.parameters.At(4) == VL_POWERED_UP)
+ {
+ // set the power up event time
+ {
+ CLockObject lock(m_mutex);
+ if (m_iPowerUpEventReceived == 0)
+ m_iPowerUpEventReceived = GetTimeMs();
+ }
+ // mark the TV as powered on
+ m_processor->GetTV()->SetPowerStatus(CEC_POWER_STATUS_ON);
+
+ // send capabilties
+ SendVendorCommandCapabilities(m_processor->GetLogicalAddress(), command.initiator);
+
+ // reactivate the source, so the tv switches channels
+ if (m_processor->IsActiveSource(m_processor->GetLogicalAddress()))
+ m_processor->GetDevice(m_processor->GetLogicalAddress())->TransmitActiveSource(false);
+ }
+ else if (command.parameters.At(4) == VL_POWERED_DOWN)
+ {
+ // reset the power up event time
+ {
+ CLockObject lock(m_mutex);
+ m_iPowerUpEventReceived = 0;
+ }
+ // mark the TV as powered off
+ m_processor->GetTV()->SetPowerStatus(CEC_POWER_STATUS_STANDBY);
+ }
+ else
+ LIB_CEC->AddLog(CEC_LOG_DEBUG, "skipping unknown vendor command");
+
+ return COMMAND_HANDLED;
+ }
+
+ return CCECCommandHandler::HandleDeviceVendorCommandWithId(command);
+}
+
+bool CVLCommandHandler::PowerUpEventReceived(void)
+{
+ bool bPowerUpEventReceived(true);
+
+ if (m_busDevice->GetLogicalAddress() != CECDEVICE_TV)
+ {
+ // get the status from the TV
+ CCECBusDevice *tv = m_processor->GetTV();
+ if (tv && tv->GetCurrentVendorId() == CEC_VENDOR_PANASONIC)
+ {
+ CVLCommandHandler *handler = static_cast<CVLCommandHandler *>(tv->GetHandler());
+ bPowerUpEventReceived = handler ? handler->PowerUpEventReceived() : false;
+ tv->MarkHandlerReady();
+ }
+ }
+ else
+ {
+ // get the current status
+ {
+ CLockObject lock(m_mutex);
+ bPowerUpEventReceived = m_iPowerUpEventReceived > 0 &&
+ GetTimeMs() - m_iPowerUpEventReceived > SOURCE_SWITCH_DELAY_MS;
+ }
+
+ // if we didn't receive the event, check if the TV is already marked as powered on
+ if (!bPowerUpEventReceived && m_busDevice->GetCurrentPowerStatus() == CEC_POWER_STATUS_ON)
+ {
+ CLockObject lock(m_mutex);
+ m_iPowerUpEventReceived = GetTimeMs();
+ bPowerUpEventReceived = true;
+ }
+ }
+
+ return bPowerUpEventReceived;
+}
+
+int CVLCommandHandler::HandleStandby(const cec_command &command)
+{
+ // reset the power up event time
+ {
+ CLockObject lock(m_mutex);
+ m_iPowerUpEventReceived = 0;
+ }
+
+ return CCECCommandHandler::HandleStandby(command);
+}
+
+void CVLCommandHandler::VendorPreActivateSourceHook(void)
+{
+ bool bTransmit(false);
+ {
+ CLockObject lock(m_mutex);
+ bTransmit = m_bCapabilitiesSent;
+ }
+ if (bTransmit)
+ SendVendorCommandCapabilities(m_processor->GetLogicalAddress(), CECDEVICE_TV);
+}
+
+void CVLCommandHandler::SendVendorCommandCapabilities(const cec_logical_address initiator, const cec_logical_address destination)
+{
+ cec_command response;
+ cec_command::Format(response, initiator, destination, CEC_OPCODE_VENDOR_COMMAND);
+ uint8_t iResponseData[] = {0x10, 0x02, 0xFF, 0xFF, 0x00, 0x05, 0x05, 0x45, 0x55, 0x5c, 0x58, 0x32};
+ response.PushArray(12, iResponseData);
+
+ if (Transmit(response, false, true))
+ {
+ if (PowerUpEventReceived())
+ {
+ CLockObject lock(m_mutex);
+ m_bCapabilitiesSent = true;
+ }
+ }
+}
+
+int CVLCommandHandler::HandleVendorCommand(const cec_command &command)
+{
+ // some vendor command voodoo that will enable more buttons on the remote
+ if (command.parameters.size == 3 &&
+ command.parameters[0] == 0x10 &&
+ command.parameters[1] == 0x01 &&
+ command.parameters[2] == 0x05)
+ {
+ SendVendorCommandCapabilities(m_processor->GetLogicalAddress(), command.initiator);
+ return COMMAND_HANDLED;
+ }
+
+ return CEC_ABORT_REASON_INVALID_OPERAND;
+}
+
+bool CVLCommandHandler::SourceSwitchAllowed(void)
+{
+ return PowerUpEventReceived();
+}
+
+int CVLCommandHandler::HandleSystemAudioModeRequest(const cec_command &command)
+{
+ if (command.initiator == CECDEVICE_TV)
+ {
+ // set the power up event time
+ {
+ CLockObject lock(m_mutex);
+ if (m_iPowerUpEventReceived == 0)
+ m_iPowerUpEventReceived = GetTimeMs();
+ }
+ // mark the TV as powered on
+ m_processor->GetTV()->SetPowerStatus(CEC_POWER_STATUS_ON);
+ }
+
+ return CCECCommandHandler::HandleSystemAudioModeRequest(command);
+}
+
+int CVLCommandHandler::HandleReportPowerStatus(const cec_command &command)
+{
+ if (command.initiator == m_busDevice->GetLogicalAddress() &&
+ command.parameters.size == 1 &&
+ (cec_power_status)command.parameters[0] == CEC_POWER_STATUS_ON)
+ {
+ CLockObject lock(m_mutex);
+ if (m_iPowerUpEventReceived == 0)
+ m_iPowerUpEventReceived = GetTimeMs();
+ }
+
+ return CCECCommandHandler::HandleReportPowerStatus(command);
+}