+libcec (1.8.2-1) unstable; urgency=low
+
+ * changed/added:
+ * p8: match to the response provided by the firmware when checking
+ responses (added in firmware v2 rev6)
+
+ * fixed:
+ * windows: update the error message when an error occurs while writing to
+ the serial port
+ * delayed source switch time was reset, resulting in an attempt every
+ second until it succeeded
+ * ensure that the vendor commands are always sent for panasonic, and that
+ the deck status for lg isn't reset. fixes some buttons not working after
+ a second or delayed source switch
+ * added guard so ReplaceHandler() doesn't accidently try to replace a
+ handler for the broadcast address
+ * wait until the commandhandler is replaced before registering a client,
+ so we don't register a client and replace it directly afterwards if the
+ tv doesn't support the device type
+ * ensure that the command handler of the tv is replaced before registering
+ a client, or it might result in a double eeprom write attempt
+ * p8: don't disable controlled mode when switching to monitoring mode
+ * p8: do delayed eeprom writes async or it'll block processing other input
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 3 Aug 2012 02:35:00 +0100
+
+libcec (1.8.1-1) unstable; urgency=low
+
+ * changed/added:
+ * added support for the Raspberry Pi.
+ * added cec-client -i / cec-client --info that calls GetLibInfo()
+ * header cleanups
+ * added CAdapterFactory, to create IAdapterCommunication instances
+ * added --debug to configure, to include -ggdb
+
+ * interface changes:
+ * added GetLibInfo()/cec_get_lib_info(), that shows how libCEC was compiled
+ and with which features included.
+ * added ToString(cec_user_control_code_key) to the interface
+
+ * fixed:
+ * disallow sending CEC_OPCODE_SET_STREAM_PATH - not allowed by the CEC spec
+ * persist the configuration in the eeprom after initialising the client.
+ fixes wrong/old settings being used in autonomous mode, which broke the
+ wake on cec funtion
+ * persist the new configuration when the hdmi port setting changed
+ * cleaned locks around callbacks
+ * always set controlled mode to false when unregistering the last client.
+ fixes 30 second timeout before controlled mode gets deactivated
+ * updated the cached device type setting properly when persisting new
+ settings. correct return value from WriteEEPROM(). lock a mutex when
+ updating the state
+ * LibCecSharp: set the primary LA in CecLogicalAddresses
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 25 Jul 2012 13:05:00 +0100
+
+libcec (1.7.2-1) unstable; urgency=low
+
+ * changed/added:
+ * display a warning message if libCEC was not compiled with adapter
+ detection for the target platform
+ * panasonic: added a vendor command for panasonic that will enable routing
+ of some more buttons on the remote (guide, text, ...)
+ * standby command won't be forwarded more than once every 10 seconds
+ * added vendor ids for Akai, AOC, Benq, Daewoo, Grundig, Medion, Sharp and
+ Vizio
+ * cec-client: don't display debug output by default in 'cec-client -l'
+
+ * interface changes:
+ * added a callback for clients that is called when a source is
+ (de)activated, so the client can respond to this action
+ * added cec_command::PushArray()
+
+ * fixed:
+ * command forwarding. fixes player not going into standby mode
+ * missing virtual keyword in CCECCommandHandler::
+ GetReplacementDeviceType()
+ * replace the handler (if needed) in GetHandler()
+ * reply with abort reason 'invalid operand' to vendor commands that we
+ don't understand
+ * changed all Handle...() commands to return a cec_abort_reason and send
+ the correct abort reason to the initiator as a response to directly
+ addressed messages
+ * changed 'couldn't change the ackmask: the connection is closed' into a
+ debug message
+ * don't send active source commands when the physical address is invalid or
+ unknown
+ * set the power status of a device to 'powered on' after it sends a stream
+ path change. can save an unneeded power state update request
+ * removed dupe code around delayed activate source commands. check for
+ delayed active source commands every 5 seconds instead of 15 seconds.
+ * panasonic: reset m_bPowerUpEventReceived in CVLCommandHandler when the
+ device lets us know it went into standby mode. fixes possibly failed
+ active source switches after it succeeded once
+ * panasonic: fixed delayed source switch for panasonic
+ * panasonic: mark the tv as powered up once it sends the audiomode request
+ * set the physical address of each device controlled by a CCECClient if
+ it's valid
+ * Windows could get stuck in a loop in case there an error occured while
+ reading registry entries
+ * ABI fixes (binary compat with v1.2 for Windows and v1.5.2 for others)
+ * replace the handler directly after getting the vendor id of a device when
+ registering a client
+ * copy the class member values of the old handler when creating a new
+ command handler, or a delayed activate source will get lost when the
+ handler is switched
+ * cec-client: wrong client version
+ * Makefile cleanups. don't link cec-client and cec-config against libudev
+ and liblockdev
+ * pin libcec to the same version as libcec1
+ * LibCecSharp: update the local configuration after connecting
+ * LibCecSharp: better handling of callbacks
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 27 Jun 2012 02:06:00 +0100
+
libcec (1.7.1-1) unstable; urgency=low
* changed/added:
repositories / deb_libcec.git / blobdiff