+libcec (2.1.0-1) unstable; urgency=low
+
+ * changed / added:
+ * added vendor id for Denon
+ * added DetectAdapters() method, that returns all device information for
+ detected adapters, not just the com port
+ * added new method PowerOnScreensaver. credits: @jmarcet
+ * LibCECTray: Added ability to send modifiers by nesting commands in
+ KeyInput.cs. credits: Nate Burr
+ * rpi: Added /opt/vc/include/interface/vmcs_host/linux to rpi_cflags to fix
+ building on 'next' firmware branch. credits: Nedim Lisica
+ * fixed:
+ * don't send two active source message sequences to philips. issue #118
+ * don't send deck status updates to philips when activating the source
+ * update the active source status correctly after a manual switch to
+ another source. closes #124
+ * rename cec_audio_status() to cec_audio_get_status() to avoid conflict
+ with the cec_audio_status enum. This makes the C API compile again.
+ credits: Dave Chapman
+ * LibCECTray: Fixed bug with libcec adding the keyup for button commands
+ and making sure they are still executed. credits: Nate Burr
+ * rpi: register callback for HPD. re-read the physical address when we
+ received VC_HDMI_ATTACHED. issue #109
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 26 Feb 2013 23:06:00 +0100
+
+libcec (2.0.5-1) unstable; urgency=low
+
+ * changed:
+ * also try polls at least twice when it failed
+ * added methods to get the audiostatus and toggle the mute status from the
+ amplifier (if connected)
+ * added comboKey and iComboKeyTimeoutMs to libcec_configuration
+ * force cec_user_control_code_unknown to 0xFF
+ * fixed:
+ * check unsupported features properly
+ * only send an active source message when the stream path changed and we
+ weren't the active source yet
+ * don't mark as inactive source on routing changes
+ * press & hold
+ * never mark user control opcodes as unsupported
+ * report our OSD name to the TV, since some TVs don't request it
+ * initial audiostatus value
+ * don't log a no longer relevant FIXME
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 6 Dec 2012 20:58:00 +0100
+
libcec (2.0.4-1) unstable; urgency=low
* changed:
#88
* support colon separated data for the 'tx' command in cec-client
* mark the adapter as (in)active source for firmware v3+
+ * added 'is' command to cec-client, to mark libCEC as inactive source
* fixed:
* only change the handler of the primary device if the tv has a quirks mode
not for other devices
* only set m_iCurrentButton when the duration isn't known yet. fixes
duplicate key press for vendor remote codes. closes #81
* delete the right registry key
+ * send active source message when we received a routing change with a
+ device that is handled by libCEC as address. issue #89
+ * return value wasn't updated in GetLogicalAddresses()
- -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 14 Nov 2012 18:34:00 +0100
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 15 Nov 2012 02:26:00 +0100
libcec (2.0.3-1) unstable; urgency=low