+libcec (1.5-1) unstable; urgency=low
+
+ * changed/added:
+ * a new libcec_configuration structs, which allows the client app to pass
+ a number of new options, like waking multiple devices on startup,
+ overriding the vendor id, etc.
+ * a new configuration GUI for Windows (.NET). this allows you to set
+ libCEC's configuration for XBMC in a convenient GUI.
+ * a CLI configuration tool (unfinished) for other platforms. will be
+ finished in an update.
+ * implemented power up for LG devices other than a TV
+ * win32: don't install libcec to the system directory by default, and
+ delete previous (testing) copies if present
+ * wait for multiple responses, not just for one at a time
+ * set the ackmask to 0 when closing the connection
+ * don't send 'image view on' when calling SetActiveSource()
+ * don't send power on, acitve source and standby commands by default in
+ cec-client
+ * platform: added CTryLockObject
+ * platform: added an Init() method in CTimeout, so it can be reset
+
+ * interface changes:
+ * added a new initialiser method: CecInitialise()/cec_initialise(), that
+ accepts a "libc_configuration" struct as parameter. this way, the
+ signature of the init method can stay the same when adding new options.
+ in LibCecSharp, the new method appears as a new constructor.
+ * added CanPersistConfiguration()/cec_can_persist_configuration()
+ * added PersistConfiguration()/cec_persist_configuration()
+ * added GetCurrentConfiguration()/cec_get_current_configuration()
+ * added SetConfiguration()/cec_set_configuration()
+ * added GetLogicalAddresses()/cec_get_logical_addresses(): returns the list
+ of addresses controlled by libCEC
+ * added RescanDevices()/cec_rescan_devices(): lets libCEC force polls to
+ all logical addresses.
+ * added a callback that is called when libCEC's configuration changed.
+ * moved the autodetect address api call to libcec_configuration. only send
+ power up commands to non-tv devices when the power state is not
+ on/transition->on. let players call the power up/power down command.
+ * return the anynet return keycode directly instead of translating it to
+ 'return' for v1.5.0+ clients
+ * extracted CecSharpTypes.h in LibCecSharp. LibCecSharp is now in the
+ CecSharp namespace
+ * include the local cectypes.h in cec.h and cecc.h instead of system wide
+ * deprecated GetLibVersion() methods. use libcec_configuration instead
+ * removed deprecated CECCreate() method
+
+ * fixed:
+ * fixed a lot of LG specific issues
+ * fixed OS-X compilation. credits: Dustin Cooper
+ * fixed a couple of possible deadlocks, e.g. when closing the connection
+ while receiving data
+ * cleaned up existing code
+ * libCEC no longer puts incoming data in a fifo buffer, but tries to
+ process it directly, which fixes issues like libCEC blocking processing
+ new commands while waiting for transmission acks.
+ * 'unsupported command' marking in CCECBusDevice
+ * ensure that the ackmask is always set to 0 when closing the connection
+ and that the call doesn't block the Close() call
+ * don't try to read or write in CUSBCECAdapterCommunication when the
+ connection has been closed
+ * LibCecSharp: added quotes to the linker statement for libcec.lib. fixes
+ compilation in paths with spaces. closes #20
+ * LibCecSharp: set the callback methods in libcec to NULL before closing
+ the connection, since these might already have been destroyed in .NET
+ * LibCecSharp: delete the internal callback struct when closing the
+ connection
+ * LibCecSharp: pass correctly formatted logical address lists
+ * ensure that the vendor id is requested first when requesting info from a
+ device, so we are using the correct handler
+ * keep the 'busy state' of the command handler in CCECBusDevice
+ * poll the next device when the current is handled by libCEC.
+ * check the vendor id of a device before sending a power on command
+ * ensure that there always is at least one device type set
+ * transmit a keypress and key release as power on command when the target
+ device isn't the TV
+ * don't do a full reinit when not needed
+ * fix active source switches for the standard CEC implementation
+ * ensure that we don't send data to ourself
+ * check whether the port is open, not whether libCEC is initialised in
+ Transmit()
+ * platform: fixed return value from CCondition::Wait()
+ * platform: don't broadcast but wake one thread in
+ CProtectedSocket::MarkReady()
+ * platform: include stdint.h in windows/os-types.h instead of typedef'ing
+ ints
+ * platform: fixed tcp socket error handling and return value.
+ * platform: fixed return values of socket operations in lib/platform
+ * platform: added predicate in CCondition
+ * deleted the signed driver from the tree, since that doesn't work. let the
+ installer create a new signed driver on the production build system
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 19 Feb 2012 01:04:00 +0100
+
+libcec (1.4-4) unstable; urgency=low
+
+ * changed/added:
+ * added tcp client sockets to lib/platform (WIP)
+ * clean up lib/platform
+ * added: set controlled mode on after opening a connection to the adapter
+ (for firmware v2)
+ * added an IAdapterCommunicationCallback interface an use a callback method
+ to pass newly received cec_commands to CCECProcessor
+ * added "driver only" and "driver + libcec" sections to the installer
+ * added a signed driver
+ * created a separate driver installer, which is included in the libCEC
+ installer. uninstalls the old unsigned version of libCEC and the driver
+ when it's found and installs the new one in C:\Program Files(x86)\
+ Pulse Eight\USB-CEC Adapter.
+ * don't sign development binaries with a temporary key. devs can do that
+ themselves when they want LibCecSharp in the GAC
+ * interface changes:
+ * added SetStreamPath()/cec_set_stream_path_logical()/
+ cec_set_stream_path_physical() to the interface, to send a
+ "set stream path" command over the CEC bus, used to activate another
+ source.
+ * fixed:
+ * transmit 'menu state activated' after the stream path has been set to a
+ device that is handled by libCEC. should fix remote commands not working
+ properly on Panasonic TVs and after another source has been active.
+ bugzid: 233
+ * set the ackmask to 0x0 when trying to find a free logical address
+ * keep trying to reconnect to the com port until the timeout runs out.
+ bugzid: 230
+ * wait 500 ms before trying to retransmit a command. always wait for the
+ result of a transmission in CCECCommandHandler::Transmit()
+ * receive and send full cec_commands, not CCECAdapterMessages in
+ CAdapterCommunication. extract an IAdapterCommunication interface. fixed
+ potentially missed data in CAdapterCommunication
+ * close and delete the connection when the processor thread ends. fixes
+ reconnect after standby (access denied / connection already opened)
+ * don't replace handlers when not initialised, or the primary device's
+ logical addres isn't known yet, which can lead to crashes. don't call
+ handlers directly in CCECProcessor without holding a lock on them
+ * fixed possible crash when command handler were switched while it was
+ being used
+ * keep the mutex locked when calling ReplaceHandlers() in CCECProcessor
+ * win32: also timeout when data is received in SocketRead()
+ * win32: fixed < vista runtime and compilation
+ * win32: ping the adapter and request the firmware version in
+ CUSBCECAdapterCommunication instead of CCECProcesssor. fixes failed
+ libCEC inits
+ * win32: fixed crash on exit in LibCecSharp
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 6 Feb 2012 14:26:00 +0100
+
+libcec (1.4-3) unstable; urgency=low
+
+ * fixed:
+ * try to ping the device and grab the firmware version until the connect
+ timeout runs out. fixes failed reconnect after standby, when the adapter
+ is still being initialised
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 27 Jan 2012 13:05:00 +0100
+
+libcec (1.4-2) unstable; urgency=low
+
+ * changed/added:
+ * added a firmware flash script for linux.
+ usage: ./support/cec-flash-device.sh /path/to/firware.hex
+ * refactored threading/locking - added windows native instead of
+ pthread-win32, so we can compile native x64 too
+ * check whether the adapter responds when connecting to it and report the
+ firmware version of the adapter after connecting
+ * moved create-installer.cmd to support/
+ * completely removed AM_SILENT_RULES
+ * interface changes:
+ * compile LibCecSharp against .NET framework 2.0 and sign the assembly
+ * fixed:
+ * only the key release events were sent, not keypresses, which appeared in
+ clients as laggy keypresses
+ * fixed reconnect after standby
+ * wait for active tranmission to finish when opening a connection to the
+ adapter. fixes initialisation errors
+ * set the default transmit timeout properly instead of using 0
+ * fixed possible deadlock because of a negative timeout in
+ CAdapterCommunication::WaitForTransmitSucceeded()
+ * fixed error message in cec-client (unable to open the device on port ...)
+ * exit cec-client after entering bootloader mode
+ * MSGCODE_START_BOOTLOADER doesn't respond with MSGCODE_COMMAND_ACCEPTED
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 25 Jan 2012 23:28:00 +0100
+
+libcec (1.4-1) unstable; urgency=low
+
+ * changed/added:
+ * added the vendor id for Sony
+ * always refresh the power state of a device when it hasn't been updated
+ for 30 seconds
+ * do silent builds by default
+ * interface changes:
+ * added optional callback methods to libCEC. enable them by calling
+ EnableCallbacks(ICECCallbacks *callbacks) /
+ cec_enable_callbacks(ICECCallbacks *callbacks). after this method is
+ called, the GetNext...() methods will not return any data
+ * added the same callbacks to LibCecSharp. implement CecCallbackMethods
+ and override the methods in there
+ * fixed:
+ * use the given timeout when trying to open a connection to the CEC
+ adapter
+ * resolved difference between method name in LibCECC.cpp and cecc.h.
+ credits: Doug Johnson
+ * don't transmit physical addresses while holding a lock in CCECProcessor
+ * don't hold a lock when sending an active source message.
+ * unload libCEC when the lib version is invalid
+ * "unused" warnings suppressed
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 12 Jan 2012 19:06:00 +0100
+
+libcec (1.3-3) unstable; urgency=low
+
+ * changed/added:
+ * place in libudev include in an extern C block. fixes compilations on
+ older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann
+ * added pkg-config to the dependencies list. issue #15
+ * updated README. closes #14
+ * added a script that tests some basic functions of the CEC adapter:
+ /support/cec-test-device.sh
+ * fixed:
+ * don't make libCEC the active source when changing the physical address.
+ don't send active source messages on startup, when not the active source
+ fixes unwanted device power ups
+ * replace the command handler directly after receiving a changed vendor
+ id. change the primary type from recording device to playback device
+ for panasonic TVs
+ * don't send a deck status update when sending an active source message
+ for panasonic TVs
+ * only switch handlers once when using the generic handler
+ * don't switch handlers when not needed
+ * hold a lock in CCECProcessor::SetHDMIPort()
+ * don't send deck status updates when sending an active source message by
+ default
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 3 Jan 2012 22:48:00 +0100
+
+libcec (1.3-2) unstable; urgency=low
+
+ * changed/added:
+ * copy libcec.dll to the XBMC installation dir when XBMC is found
+ * disable background polling. let the client request this info when needed
+ * update the power status of a device when it's set to
+ CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON
+ * wait for the correct response when requesting something, not just any
+ response
+ * don't keep trying the same command/request after receiving a feature
+ abort message
+ * interface changes:
+ * change the previously unused boolean parameter in volume control methods
+ to bSendRelease, and only send a key release when it's true. default to
+ true
+ * fixed:
+ * don't send the power up/down keypress to listeners when in the initial
+ device state (powered off). fixes unexpected shutdown in XBMC when
+ connecting to the CEC adapter.
+ * send a 'menu state activated' command when starting up. bugzid: 113
+ * don't wait for a response when not needed
+ * don't hold a lock while waiting for a response. fixes failed libCEC
+ inits and slow responses
+ * don't replace a command handler when it's being used. fixes possible
+ crash on startup
+ * don't try to do anything before the processor thread has started
+ * don't transmit active source messages when the physical address is
+ still 0xFFFF
+ * don't init the default handler before the physical address is known
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 29 Dec 2011 03:05:00 +0100
+
+libcec (1.3-1) unstable; urgency=low
+
+ * changed/added:
+ * make libudev optional. if libudev is not available on linux, adapter
+ autodetection will also not be available. fixes compilation on Hardy/ATV1
+ * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET
+ language
+ * added vendor support for LG
+ * added vendor support for Philips
+ * added vendor support for Yamaha
+ * added vendor support for Onkyo
+ * added 'scan' command to cec-client, that displays info about devices on
+ the bus. made all ToString() methods available on the interface.
+ * added '-s' or '--single-command' to cec-client. starting cec-client with
+ this parameter executes a single command in cec-client and does not power
+ on devices on startup and power them off on exit. this way, you can use
+ cec-client in a shell script. since there's some handshaking involved at
+ startup, this is not very fast. to execute a command and only display the
+ result and any error/warning, execute it with
+ RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch
+ files are a bit different)
+ * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to
+ cec-client's parameters
+ * handle image view on and text view on
+ * handle routing information and report physical address opcodes
+ * handle audio status updates
+ * send ping and bootloader commands via the output queue
+ * scan the CEC bus for devices when starting libcec
+ * pass all commands that are directed at libcec to listeners
+ * interface changes:
+ * added GetActiveSource()/cec_get_active_source()
+ * added IsActiveSource()/cec_is_active_source()
+ * added GetDevicePhysicalAddress()/cec_get_device_physical_address()
+ * added GetDeviceOSDName()/cec_get_osd_name()
+ * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/
+ cec_send_key_release()
+ * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(),
+ MuteAudio()/cec_mute_audio()
+ * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/
+ cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type().
+ * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load
+ and when a device with the same physical address is detected, libcec will
+ use the selected hdmi port on that device. should fix source selection on
+ other devices, like an amplifier
+ * added a hook in libcec for physical address autodetection
+ * fixed:
+ * don't request the physical address from the tv (it's always 0x0000)
+ * set the proper ackmask before doing anything else
+ * don't unlock the transmit mutex in CCECProcessor while waiting for an
+ answer
+ * fix device polling
+ * refactor CEC read/write. keep a single lock for all writes, not one per
+ device
+ * ignore other data while waiting for a response
+ * retry failed tranmissions
+ * don't delete a message before it's been sent when starting the bootloader
+ * or when sending a ping
+ * fixed possible segfault when switching the command handler after a vendor
+ * id changed
+ * handle audio opcodes correctly
+ * inactive source should be directly addressed at the TV
+ * don't report a changed physical address when it hasn't changed
+ * routing information sets the stream path, not the physical address
+ * don't scan the whole bus in CCECProcessor::IsActiveDeviceType()
+ * don't request the vendor id from devices that are handled by libcec
+ * mark device status as present when a command was received from a device
+ * always send a power on command in CCECBusDevice::PowerOn()
+ * don't request updates statusses unless needed
+ * report physical address sends 3 parameters, not 2. check whether the
+ device type is correct
+ * devices can send vendor commands from other vendors, so don't assume the
+ device is of a certain vendor when it sends commands with a vendor id
+ * thread safety fixes. bugzid: 19
+ * clear any previous input when opening a connection to the adapter.
+ bugzid: 54
+ * use the correct source address in CSLCommandHandler::HandleVendorCommand()
+ * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5
+ * renamed enum methods. fixes potential macro collision with isset().
+ thanks davilla
+ * don't change the active device when receiving stream path changed
+ messages. fixes wrong source selection when powering after the TV.
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 09 Dec 2011 12:16:00 +0100
+
+libcec (1.2-1) unstable; urgency=low
+
+ * bugfixes:
+ * pass the deck_control command to libcec listeners
+ * check whether the initiator is valid in CCECProcessor::ParseCommand().
+ fixes possible segfault when parsing invalid data
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 12 Nov 2011 13:36:00 +0100
+
+libcec (1.1-3) unstable; urgency=low
+
+ * fixed return value in CCECProcessor::SetStreamPath(), which prevented
+ active source and menu state from being sent
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 23:36:00 +0100
+
+libcec (1.1-2) unstable; urgency=low
+
+ * forgot to update the headers to v1.1
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 18:56:00 +0100
+
+libcec (1.1-1) unstable; urgency=low
+
+ * interface changes:
+ * added logical address autodetection and let libcec handle multiple types
+ simultaniously. for logical address autodetection, you have to use
+ CECInit()/cec_init_typed() instead of CECCreate()/cec_init()
+ * added SetActiveSource()/cec_set_active_source() to the interface.
+ deprecated SetActiveView()/cec_set_active_view()
+ * added SetMenuState()
+ * added PollDevice()/cec_poll_device()
+ * removed duplicate method SetActiveSource() / SetActiveView()
+ * added SetDeckControlMode() and SetDeckInfo()
+ * fixed:
+ * added vendor detection for panasonic and broadcast active view and set
+ menu state when a panasonic device sets the stream path. thanks for the
+ pointer cptcoconut.
+ * added vendor code for pioneer
+ * osd string is 13 chars max. don't send more
+ * send the correct cec version for each device
+ * switch to panasonic specific cec implementation if a panasonic device was
+ detected
+ * send the correct device type in TransmitPhysicalAddress()
+ * send a reply from the correct device when the stream path is requested
+ * opcode 0x80 means the stream path changed, not the physical address
+ * don't poll for a vendor ID in monitoring mode
+ * fixed parameter parsing in SetVendorId()
+ * buffer up commands that are received while waiting for an ack. only send
+ 'active source' message for the actual active source
+ * win32: prepend the com port path with '\\.\', so com ports > 9 can be
+ accessed. thanks smolesen
+ * audio systems cannot be an active source, so don't transmit active
+ source message from this device
+ * only send 'active source' when powered on
+ * only set the osd name for the primary device. use default values for
+ others
+ * increase physical address with 0x100 per device
+ * win32: removed unneeded afxres.h include in the resource files, which
+ is not present when using studio express. thanks Ghuron
+ * fixed C headers
+ * mark the active source as active and other devices as inactive
+ * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER
+ * transmit the menu state as (active) when the stream path is set
+ * changed:
+ * changed copyright of boblight files with permission of the original
+ author
+ * partial handling of audio related opcodes
+ * more consistent log messages
+ * set a device type and name for each CCECBusDevice
+ * keep a power and menu state per device
+ * renamed all Broadcast...() and Report...() methods to Transmit...()
+ * renamed SetOSDString() to TransmitOSDString()
+ * changed debug level of 'did not receive ack' from error to debug
+ * only set the power status to 'on' for the primary device
+ * moved method decriptions from cecc.h to cec.h
+ * only send a power on command when a device isn't on already and set
+ the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while
+ powering on
+ * handle CEC_OPCODE_STANDBY
+ * handle CEC_OPCODE_ACTIVE_SOURCE
+ * always start in standby mode and let the tv (or other device) send the
+ power on command
+ * renamed the last few enums
+ * handle deck related opcodes.
+ * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown'
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 17:42:00 +0100
+
+libcec (1.0-1) unstable; urgency=low
+
+ * interface changes:
+ * set lib interface version back to 1.0 and rename GetLibVersion() to
+ GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion()
+ * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor
+ version number to 1
+ * fixed:
+ * samsung's vendor specific remote keypresses don't send key releases. added
+ call to AddKey() directly after the keypress
+ * always reset the button press time in CLibCEC::AddKey()
+ * always wait for a signal in CCECProcessor::Transmit()
+ * changed:
+ * drop shared_ptr and use a normal pointer. removed boost dependency
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 04 Nov 2011 00:14:00 +0100
+
+libcec (0.8-2) unstable; urgency=low
+
+ * added 'libboost-dev' to build deps
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 23:31:00 +0100
+
+libcec (0.8-1) unstable; urgency=low
+
+ * interface changes:
+ * added GetDevicePowerStatus()/cec_get_device_power_status()
+ * added GetDeviceVendorId()/cec_get_device_vendor_id()
+ * added GetDeviceMenuLanguage()/cec_get_device_menu_language()
+ * added GetDeviceCecVersion()/cec_get_device_cec_version()
+ * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when
+ monitoring is enabled, the device will only log the data it received,
+ but will not respond to any message
+ * removed timeout parameter in Transmit() and included the ack timeout in
+ the cec_command struct
+ * made the vendor id -> vendor name translation available
+ * made CEC_LOG levels powers of 2
+ * introduced CEC_LOG_TRAFFIC log level
+ * fixed:
+ * set the correct ackmask on startup
+ * wait for ack while keeping a lock
+ * wait for the processor thread to start before continueing on startup
+ * wait for messages to be transmitted before continueing in
+ CCECProcessor::Transmit()
+ * only set the logical address once when it has changed
+ * correct source for broadcast messages
+ * win32: create Release type installer
+ * changed:
+ * make all reads and write in CAdapterCommunication go through buffers.
+ * poll for a vendor ID of connected devices and switch to a non-standard
+ CEC implementation if needed.
+ * added vendor detection of Samsung and LG devices
+ * handle samsung remote command 'return'
+ * cec-client:
+ * added -la and --logical-address to the command line params
+ * added -d and --log-level params to cec-client
+ * added -sf and --short-log-file, which only log the actual messages, not
+ the level and timestamp
+ * added -f and --log-file parameters to cec-client
+ * added option to change the log level to cec-client
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 22:58:00 +0100
+
+libcec (0.7-1) unstable; urgency=low
+
+ * send a keypress with 0 duration when a key is pressed and with a duration
+ set when it's released
+ * added SetOSDString() to the interface (not supported by all tvs)
+ * fixed: 'routing change' is a broadcast message. log routing changes, but
+ don't send a 'set active view' message, so the active input won't be
+ changed
+ * log keypresses in the debug log
+ * added 'pa' command to cec-client, to change the physical address
+ * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so
+ the HDMI port number to use can be changed
+ * fixed: put the message processing code from WaitForAck() in ParseMessage().
+ fixes missing incoming message logging of non-data messages when not
+ waiting for an ACK
+ * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK
+ before returning
+ * fixed: set initiator and destination first in cec_command::push_back().
+ fixes 'tx' command in cec-client
+ * fixed: keep trying to connect while iTimeout isn't reached (default 10
+ seconds). fixes exit with a 'permission denied' error when the device isn't
+ ready yet. remove CEC_SETTLE_DOWN_TIME
+ * fixed: don't call SetActiveView() when reporting the power status. fixes
+ loop which causes some TVs to report failed connections
+ * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed.
+ * fixed: add the device type as parameter when sending the physical address.
+ thanks bobo1on1
+ * fixed: typo in libcec.pc.in
+ * added optional strLib parameter to LoadLibCec(), so the location of the
+ shared library can be specified
+ * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB
+ * use int instead of bool on the public C interface and remove stdbool.h include
+ * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h =>
+ cecloader.h, CECTypes.h => cectypes.h
+ * updated debian package. split up libcec and libcec-dev
+ * fixed: changed to use dlopen instead of static linkage. shuffled headers a
+ bit. bumped interface to version 7
+ * removed 'rt' from libraries. it's not needed (anymore)
+ * fixed: reset the active view after a routing change. issue #1
+ * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an
+ error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear
+ * added contributors link
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 14 Oct 2011 17:34:00 +0200
+
+libcec (0.6-1) unstable; urgency=low
+
+ * bumped interface version to 6
+ * fixed packet output (reporting the OSD name correctly now)
+ * refactored packet structs: split up in cec commands and adapter messages
+ * fixed i/o timings
+ * added Darwin support (thanks Davilla!)
+ * fixed WaitForAck()
+ * fixed possible deadlock when starting a new thread
+ * implemented vendor id and device class parsing. full detection will follow
+ * added "on" and "standby" commands to the test client
+ * retransmit packets if needed
+ * fix GetTimeMs() on linux
+ * added timestamp to log messages
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 09 Oct 2011 15:15:00 +0200
+
+libcec (0.5-1) unstable; urgency=low
+
+ * bumped interface version to 5
+ * don't pass std::string and std::vector accross the interface
+ * fixed heap corruption crashes on windows
+ * fixed some memory leaks
+ * reset all structs to default values before doing with them
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 07 Oct 2011 22:00:00 +0200
+
+libcec (0.4-3) unstable; urgency=low
+
+ * fixed reconnect
+ * fixed some threading related bugs
+ * fixed deadlock on exit
+ * fixed wrongly reported physical address
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 06 Oct 2011 00:19:00 +0200
+
+libcec (0.4-2) unstable; urgency=low
+
+ * fixed int parameter sizes and some signed/unsigned warnings
+ * check whether m_port isn't NULL in ReadFromDevice
+ * stop the processor thread and delete the CSerialPort instance on exit
+ * added mutex in CSerialPort
+ * fix segfault on exit
+ * renamed libPlatform -> platform.
+ * stuck everything from libCEC in the CEC namespace to avoid namespace
+ polution
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 23:45:00 +0200
+
+libcec (0.4-1) unstable; urgency=low
+
+ * bumped interface version to 4
+ * timeout parameter removed from Close()/cec_close(). return type changed to
+ void
+ * added cec_destroy() method
+ * removed timeout parameter from Transmit()
+ * change the default argument of PowerOnDevices() to CECDEVICE_TV
+ * removed PowerOffDevices(). use StandbyDevices() instead
+ * removed obsolete methods from the interface
+ * fixed bug: pthread_cond_wait was called without the mutex locked
+ * fixed possible deadlock: don't send messages and wait for an ack with the
+ mutex locked in CCECParser
+ * created a separate reader thread and fixed the 'lock timeout' bug
+ * testclient: use CECDEVICE_TV instead of the default argument
+ (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices()
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 00:48:00 +0200
+
+libcec (0.3-1) unstable; urgency=low
+
+ * added device detection support for Windows
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 02 Oct 2011 12:09:33 +0200
+
+libcec (0.2-1) unstable; urgency=low
+
+ * added a Close() method to the interface
+ * Added CEC command that were received by the adapter in a buffer that can be
+ read by a client with GetNextCommand()/cec_get_next_command(). added a
+ 'help' command to the test client, that displays all available commands
+ * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use
+ SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to
+ the testclient to set the logical address of the cec adapter
+ * Added optional logical and physical address parameters to
+ LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace
+ close tag in CECExports.h. updated interface documentation. bumped
+ interface version to 2.
+ * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the
+ test client. the previous one was too long and being rejected
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 28 Sep 2011 01:33:00 +0200
+
libcec (0.1-1) unstable; urgency=low
* Initial release v0.1
- -- Lars Op den Kamp <info@pulse-eight.com> Wed, 28 Sep 2011 21:42:48 +0200
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 28 Sep 2011 23:55:48 +0200
repositories / deb_libcec.git / blobdiff