+libcec (1.8.1-1) unstable; urgency=low
+
+ * changed/added:
+ * added support for the Raspberry Pi.
+ * added cec-client -i / cec-client --info that calls GetLibInfo()
+ * header cleanups
+ * added CAdapterFactory, to create IAdapterCommunication instances
+ * added --debug to configure, to include -ggdb
+
+ * interface changes:
+ * added GetLibInfo()/cec_get_lib_info(), that shows how libCEC was compiled
+ and with which features included.
+ * added ToString(cec_user_control_code_key) to the interface
+
+ * fixed:
+ * disallow sending CEC_OPCODE_SET_STREAM_PATH - not allowed by the CEC spec
+ * persist the configuration in the eeprom after initialising the client.
+ fixes wrong/old settings being used in autonomous mode, which broke the
+ wake on cec funtion
+ * persist the new configuration when the hdmi port setting changed
+ * cleaned locks around callbacks
+ * always set controlled mode to false when unregistering the last client.
+ fixes 30 second timeout before controlled mode gets deactivated
+ * updated the cached device type setting properly when persisting new
+ settings. correct return value from WriteEEPROM(). lock a mutex when
+ updating the state
+ * LibCecSharp: set the primary LA in CecLogicalAddresses
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 25 Jul 2012 13:05:00 +0100
+
+libcec (1.7.2-1) unstable; urgency=low
+
+ * changed/added:
+ * display a warning message if libCEC was not compiled with adapter
+ detection for the target platform
+ * panasonic: added a vendor command for panasonic that will enable routing
+ of some more buttons on the remote (guide, text, ...)
+ * standby command won't be forwarded more than once every 10 seconds
+ * added vendor ids for Akai, AOC, Benq, Daewoo, Grundig, Medion, Sharp and
+ Vizio
+ * cec-client: don't display debug output by default in 'cec-client -l'
+
+ * interface changes:
+ * added a callback for clients that is called when a source is
+ (de)activated, so the client can respond to this action
+ * added cec_command::PushArray()
+
+ * fixed:
+ * command forwarding. fixes player not going into standby mode
+ * missing virtual keyword in CCECCommandHandler::
+ GetReplacementDeviceType()
+ * replace the handler (if needed) in GetHandler()
+ * reply with abort reason 'invalid operand' to vendor commands that we
+ don't understand
+ * changed all Handle...() commands to return a cec_abort_reason and send
+ the correct abort reason to the initiator as a response to directly
+ addressed messages
+ * changed 'couldn't change the ackmask: the connection is closed' into a
+ debug message
+ * don't send active source commands when the physical address is invalid or
+ unknown
+ * set the power status of a device to 'powered on' after it sends a stream
+ path change. can save an unneeded power state update request
+ * removed dupe code around delayed activate source commands. check for
+ delayed active source commands every 5 seconds instead of 15 seconds.
+ * panasonic: reset m_bPowerUpEventReceived in CVLCommandHandler when the
+ device lets us know it went into standby mode. fixes possibly failed
+ active source switches after it succeeded once
+ * panasonic: fixed delayed source switch for panasonic
+ * panasonic: mark the tv as powered up once it sends the audiomode request
+ * set the physical address of each device controlled by a CCECClient if
+ it's valid
+ * Windows could get stuck in a loop in case there an error occured while
+ reading registry entries
+ * ABI fixes (binary compat with v1.2 for Windows and v1.5.2 for others)
+ * replace the handler directly after getting the vendor id of a device when
+ registering a client
+ * copy the class member values of the old handler when creating a new
+ command handler, or a delayed activate source will get lost when the
+ handler is switched
+ * cec-client: wrong client version
+ * Makefile cleanups. don't link cec-client and cec-config against libudev
+ and liblockdev
+ * pin libcec to the same version as libcec1
+ * LibCecSharp: update the local configuration after connecting
+ * LibCecSharp: better handling of callbacks
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 27 Jun 2012 02:06:00 +0100
+
+libcec (1.7.1-1) unstable; urgency=low
+
+ * changed/added:
+ * added physical address detection via ADL for AMD graphics cards
+ * attempt to get the edid from nvidia's graphics card driver on linux via
+ /proc/acpi/video/NGFX/HDMI/EDID
+ * attempt to get the PA from the registry on windows if we fail to get the
+ physical address from the display driver
+ * changed the order in CCECClient::SetPhysicalAddress() so it first checks
+ whether a PA override is set in libcec_configuration.iPhysicalAddress,
+ then checks whether the address can be detected, and if both failed it'll
+ use the HDMI port + base device setting
+ * cec-client: only active the source when reconnecting if libcec was the
+ active source before closing the connection
+ * platform: added tcp server sockets for posix
+
+ * interface changes:
+ * libcec_configuration.bAutodetectAddress is now read-only, and will be set
+ to 1 by libCEC if the PA was autodetected
+ * LibCecSharp: don't use an int but a CecUserControlCode in a CecKeypress
+
+ * fixed:
+ * don't unregister clients in CLibCEC when disconnecting, but only in
+ CCECProcessor. fixes reconnect after close
+ * MSGCODE_TIMEOUT_ERROR is a response to a transmission
+ * retry 'activate source' every 10 seconds if it failed
+ * don't respond with a poll from the broadcast address when receiving
+ in CSLCommandHandler::HandleDeviceVendorId(), but use the primary LA of
+ the client as source instead
+ * hold a lock when changing the ackmask in
+ CUSBCECAdapterCommunication::Open
+ * don't respond with a feature abort to opcode play messages. bugzid: 873
+ * get the vendor id of the TV before allocating logical addresses, so we
+ can determine if the TV supports the requested device type directly
+ * TransmitImageViewOn() and TransmitActiveSource() always returned true,
+ even if sending the command failed, so the retry for failed source
+ activations was never triggered
+ * open libcec.so.1 instead of libcec.so in cecloader.h. credits @coling.
+ github issue #30.
+ * fixed missing firmware version and build date in cec-client -l /
+ GetDeviceInformation()
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 10 Jun 2012 13:39:00 +0100
+
+libcec (1.6.1-5) unstable; urgency=low
+
+ * synced /debian directory with the one in precise (with a couple of changes)
+ * changed/added:
+ * serial port locking on linux
+ * cec-client: added -m/--monitor startup options, which will start a
+ monitor-only client. use 'mon 0' to switch to a normal client
+ * display an alert message when the firmware of the adapter can be upgraded
+ * added CEC 1.4 opcodes
+ * send a feature abort again for all unhandled commands
+ * refactored CLibCEC so a client registers itself within CCECProcessor,
+ which then allocates one or more logical addresses for it.
+
+ * interface changes:
+ * added a new setting, bMonitorOnly, which will start a monitor-only client
+
+ * fixed:
+ * ensure that we don't crash out when trying to stop a thread that hasn't
+ been started yet
+ * don't send a 'disconnected' alert when the close method is called
+ * use the correct source when transmitting an abort message as a reposonse
+ to a vendor command with id
+ * removed statics
+ * check the client version, not the server version in
+ libcec_configuration::operator==()
+ * cec-config: fix physical address detection
+ * LibCecSharp: fixed buffer overrun when copying libcec_configuration.
+ fixes crash when trying to save the configuration in the config gui.
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 14 May 2012 22:39:00 +0100
+
+libcec (1.6.1-2) unstable; urgency=low
+
+ * Build depends on pkg-config. (Closes: #669919)
+ * libudev-dev only optionally needed for Linux.
+
+ -- Andres Mejia <amejia@debian.org> Sat, 21 Apr 2012 19:03:19 -0400
+
+libcec (1.6.1-1) unstable; urgency=low
+
+ [ Mario Limonciello ]
+ * New upstream version (LP: #982272)
+
+ [ Andres Mejia ]
+ * New release fixes build failure with GCC-4.7. (Closes: #667241)
+ * Bump to Standards-Version 3.9.3.
+
+ -- Andres Mejia <amejia@debian.org> Sat, 21 Apr 2012 00:02:08 -0400
+
+libcec (1.3.2-3) unstable; urgency=low
+
+ * Make dpkg-source options default for packaging.
+
+ -- Andres Mejia <amejia@debian.org> Tue, 10 Jan 2012 18:12:57 -0500
+
+libcec (1.3.2-2) unstable; urgency=low
+
+ * Add options to pass to dpkg-source.
+
+ -- Andres Mejia <amejia@debian.org> Sun, 08 Jan 2012 22:59:34 -0500
+
+libcec (1.3.2-1) unstable; urgency=low
+
+ * Initial release. (Closes: #655143)
+
+ -- Andres Mejia <amejia@debian.org> Sun, 08 Jan 2012 15:36:49 -0500
+
libcec (1.6-3) unstable; urgency=low
* changed/added:
repositories / deb_libcec.git / blobdiff