+libcec (1.7.1-1) unstable; urgency=low
+
+ * changed/added:
+ * added physical address detection via ADL for AMD graphics cards
+ * attempt to get the edid from nvidia's graphics card driver on linux via
+ /proc/acpi/video/NGFX/HDMI/EDID
+ * attempt to get the PA from the registry on windows if we fail to get the
+ physical address from the display driver
+ * changed the order in CCECClient::SetPhysicalAddress() so it first checks
+ whether a PA override is set in libcec_configuration.iPhysicalAddress,
+ then checks whether the address can be detected, and if both failed it'll
+ use the HDMI port + base device setting
+ * cec-client: only active the source when reconnecting if libcec was the
+ active source before closing the connection
+ * platform: added tcp server sockets for posix
+
+ * interface changes:
+ * libcec_configuration.bAutodetectAddress is now read-only, and will be set
+ to 1 by libCEC if the PA was autodetected
+ * LibCecSharp: don't use an int but a CecUserControlCode in a CecKeypress
+
+ * fixed:
+ * don't unregister clients in CLibCEC when disconnecting, but only in
+ CCECProcessor. fixes reconnect after close
+ * MSGCODE_TIMEOUT_ERROR is a response to a transmission
+ * retry 'activate source' every 10 seconds if it failed
+ * don't respond with a poll from the broadcast address when receiving
+ in CSLCommandHandler::HandleDeviceVendorId(), but use the primary LA of
+ the client as source instead
+ * hold a lock when changing the ackmask in
+ CUSBCECAdapterCommunication::Open
+ * don't respond with a feature abort to opcode play messages. bugzid: 873
+ * get the vendor id of the TV before allocating logical addresses, so we
+ can determine if the TV supports the requested device type directly
+ * TransmitImageViewOn() and TransmitActiveSource() always returned true,
+ even if sending the command failed, so the retry for failed source
+ activations was never triggered
+ * open libcec.so.1 instead of libcec.so in cecloader.h. credits @coling.
+ github issue #30.
+ * fixed missing firmware version and build date in cec-client -l /
+ GetDeviceInformation()
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 10 Jun 2012 13:39:00 +0100
+
+libcec (1.6.1-5) unstable; urgency=low
+
+ * synced /debian directory with the one in precise (with a couple of changes)
+ * changed/added:
+ * serial port locking on linux
+ * cec-client: added -m/--monitor startup options, which will start a
+ monitor-only client. use 'mon 0' to switch to a normal client
+ * display an alert message when the firmware of the adapter can be upgraded
+ * added CEC 1.4 opcodes
+ * send a feature abort again for all unhandled commands
+ * refactored CLibCEC so a client registers itself within CCECProcessor,
+ which then allocates one or more logical addresses for it.
+
+ * interface changes:
+ * added a new setting, bMonitorOnly, which will start a monitor-only client
+
+ * fixed:
+ * ensure that we don't crash out when trying to stop a thread that hasn't
+ been started yet
+ * don't send a 'disconnected' alert when the close method is called
+ * use the correct source when transmitting an abort message as a reposonse
+ to a vendor command with id
+ * removed statics
+ * check the client version, not the server version in
+ libcec_configuration::operator==()
+ * cec-config: fix physical address detection
+ * LibCecSharp: fixed buffer overrun when copying libcec_configuration.
+ fixes crash when trying to save the configuration in the config gui.
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 14 May 2012 22:39:00 +0100
+
+libcec (1.6.1-2) unstable; urgency=low
+
+ * Build depends on pkg-config. (Closes: #669919)
+ * libudev-dev only optionally needed for Linux.
+
+ -- Andres Mejia <amejia@debian.org> Sat, 21 Apr 2012 19:03:19 -0400
+
+libcec (1.6.1-1) unstable; urgency=low
+
+ [ Mario Limonciello ]
+ * New upstream version (LP: #982272)
+
+ [ Andres Mejia ]
+ * New release fixes build failure with GCC-4.7. (Closes: #667241)
+ * Bump to Standards-Version 3.9.3.
+
+ -- Andres Mejia <amejia@debian.org> Sat, 21 Apr 2012 00:02:08 -0400
+
+libcec (1.3.2-3) unstable; urgency=low
+
+ * Make dpkg-source options default for packaging.
+
+ -- Andres Mejia <amejia@debian.org> Tue, 10 Jan 2012 18:12:57 -0500
+
+libcec (1.3.2-2) unstable; urgency=low
+
+ * Add options to pass to dpkg-source.
+
+ -- Andres Mejia <amejia@debian.org> Sun, 08 Jan 2012 22:59:34 -0500
+
+libcec (1.3.2-1) unstable; urgency=low
+
+ * Initial release. (Closes: #655143)
+
+ -- Andres Mejia <amejia@debian.org> Sun, 08 Jan 2012 15:36:49 -0500
+
+libcec (1.6-3) unstable; urgency=low
+
+ * changed/added:
+ * cec-client: show the firmware build date if available in cec-client -l
+ * cec-client: don't activate the source when starting
+ * cec-client: group up the output of the 'scan' command, and add the
+ currently active source to the output
+ * log the libCEC version in the 'connected to the CEC adapter' log entry,
+ and add the firmware build date to the line if it's available, so all
+ relevant version info is available in 1 log line.
+ * async writes for CUSBCECAdapterCommunication. less locks and polls, more
+ speed
+ * added 'make docs' target, that updates the doxygen documentation
+
+ * interface changes:
+ * added operator == and != for libcec_configuration
+ * added GetResponseOpcode(cec_opcode opcode) to cec_command
+ * added the firmware build date to libcec_configuration, so it can be
+ displayed by the client too.
+ * added static CLibCEC::Alert() method and CEC_ALERT_CONNECTION_LOST value
+ * added a callback to handle menu state changes. if the callback method
+ returns 1, then the change is processed by the CCECBusDevice too. if 0,
+ then the CCECBusDevice will always have menu state 'activated', so
+ keypresses are routed. bugzid: 724
+ * added a default menu language to libcec_configuration and set this
+ language for devices controlled by libcec. bugzid: 69
+
+ * fixed
+ * CCECProcessor::IsActiveSource() - TV was never checked
+ * don't call the deprecated SetActiveView() method in cec-client
+ * request the active source if unknown in CCECProcessor::GetActiveSource()
+ * don't try to match a device with PA 0xFFFF.
+ * don't change the power status of a device when changing the stream path
+ * don't set the power status to 'powered off' when marking the source
+ managed by libcec as inactive, or the tv will might send a power control
+ keycode when making it active again, potentially shutting down the system
+ * potential segfault in CCECProcessor::GetDeviceByPhysicalAddress()
+ * stream path changes when changed to the TV source (PA 0)
+ * clear the unsupported features list in CCECBusDevice::ResetDeviceStatus()
+ * never mark vendor commands as unsupported (only some may be unsupported),
+ as well as some others that should never be marked unsupported
+ * don't retry in CCECCommandHandler if the command has been marked as
+ unsupported
+ * don't request the PA of devices when handling an incoming CEC command, or
+ it'll block things while waiting for a response. if that response never
+ comes, or comes late, then other incoming commands will be timed out
+ before they are handled
+ * optimisation - strip unneeded virtual keywords from top level
+ implementations
+ * use the vlcommandhandler for the primary device that is handled by libCEC
+ when a panasonic tv is detected, so delayed activate source commands are
+ using the correct handler. bugzid: 723
+ * set the power status of device controlled by libCEC to
+ CEC_POWER_STATUS_ON
+ instead of IN_TRANSITION_STANDBY_TO_ON. reset the device status of a
+ device if it was detected as removed. bugzid: 755
+ * potentially uninitialised values in cec_command
+ * delay the 'active source' command for panasonic, until the vendor command
+ that reports that the TV is powered on has been received. bugzid: 723
+ * only respond to Give Physical Address with Report Physical Address.
+ bugzid: 592
+ This fixes several reports of the TV improperly switching to the libcec
+ device after it has previously switched to another source. Fix confirmed
+ with Panasonic and also reported to be an issue with Samsung and
+ Philips.
+ * check whether callback methods are set to a valid ptr
+ * number of retries for polls
+ * win32: fix build in paths with spaces. bugzid: 730
+ * LibCecSharp: free the alert GC callback when cleaning up
+ * the wrong setting was being read when powering on devices
+ * close the connection when a comm error was detected, and notify the
+ client via an alert
+ * don't segfault when calling ThreadsWait() without a valid thread
+ * lib/platform: fixed memleak
+ * leak in CCECAdapterMessageQueue::Write
+ * don't send commands if we know them to be unsupported. bugzid: 725
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Apr 2012 11:30:00 +0100
+
+libcec (1.6-2) unstable; urgency=low
+
+ * fixed:
+ * fixed typo in CUSBCECAdapterCommands::RequestSettings() that prevented
+ the settings from being read. the settings were still written, but never
+ read when bGetSettingsFromROM = 1.
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Apr 2012 11:30:00 +0100
+
+libcec (1.6-1) unstable; urgency=medium
+
+ * changed/added:
+ * full firmware V2 support
+ * -o/--osdname argument for cec-client to set a custom osd name
+ * added the firmware version to cec-client's -l / --list-devices command.
+ bugzid: 631
+ * added power on command for Samsung AVR devices. bugzid: 361
+ * added buttoncode for 'channels list' on Samsung (0x96)
+ * don't check for the windows ddk when a prebuilt driver installer is
+ present
+ * respond to Get Menu Language. bugzid: 547. In the event that the menu
+ language is undefined in libcec (currently the default), the response
+ will be a feature abort.
+
+ * interface changes:
+ * added the firmware version to libcec_configuration (read-only). bumped
+ server version to 1.6.0. fixed 'unknown server version' message on
+ startup. bugzid: 631
+ * added a new setting to control whether to put the TV in standby when the
+ player is put in standby. added some missing bits (version numbers,
+ config) to LibCecSharp. bugzid: 558
+ * added an alert callback. bugzid: 462
+ * added bShutdownOnStandby to libcec_configuration. bugzid: 660. This
+ setting tells the client to shutdown when the TV switches off and is
+ complimentary to bPowerOffOnStandby, which tells the PC to suspend.
+ They are kept separate to maintain backwards compatability.
+
+ * fixed
+ * gcc 4.7 compilation
+ * poll doesn't have an opcode. bugzid: 591
+ * wait for MSGEND when data was received when opening the connection.
+ bugzid: 536
+ * mark the correct device as active source after a stream path change.
+ if the new address is not found, but the old address is, then mark the
+ old address as inactive. fixes TV switching back to the old active source
+ when it scans for devices. bugzid: 592
+ * ensure that the vendor ID is sent before trying to activate any SL device
+ bugzid: 574
+ * fixed possible crash when in CLibCEC::IsLibCECActiveSource() when libCEC
+ doesn't know which device is the active source. bugzid: 479
+ * correct handling CEC_USER_CONTROL_CODE_POWER. This ensures that the power
+ code always operates as a toggle, depending on the current state, and
+ that SetCurrentButton is always called for a valid user control code.
+ bugzid: 570
+ * frequency wasn't checked in GetTimeMs(), leading to incorrect wait times
+ on some windows systems
+ * refactored USB adapter communication. less locks, shorter locks, added
+ documentation, lots of clean ups and no more incoming messages that are
+ skipped
+ * the destructor of CSerialSocket didn't call Close()
+ * added guards in CSerialPort
+ * reset m_socket to INVALID_SERIAL_SOCKET_VALUE after closing the
+ connection
+ * always wait for thread exit in CThread's desctructor
+ * crash on exit after GetDeviceInformation()
+ * check whether the destination is valid before setting anything in
+ m_bWaitingForAck. fixes heap corruption and crash on exit. bugzid: 479
+ * bUseTVMenuLanguage from libcec_configuration wasn't copied in
+ SetConfiguration(), so this setting was reset to the default value
+ (enabled) every time. bugzid: 617
+ * request the vendor id of a device if needed when the device status is
+ changed into 'present'. bugzid: 361
+ * give priority to messages from the TV. removed the global lock in
+ CCECProcessor when sending. this is no longer needed. bugzid: 238
+ * add some bounds checking to the HDMI port number. bugzid: 508
+ * fixed usbser.sys copying in the driver .INF. bugzid: 503
+ * only update the physical address when it has actually changed. bugzid:
+ 672
+ * moved the static variables in os-threads from the header to a separate
+ cpp file, or it could lead to problems when included multiple times
+ * don't send an active source command when the physical address couldn't be
+ set, or it might confuse other CEC devices
+ * serial socket timeouts. bugzid: 654
+ * fixed possible crash when trying to request a vendor id of a device when
+ the address of libCEC isn't known yet. bugzid: 654
+ * extra guard so no commands are transmitted without a valid initiator.
+ bugzid: 654
+ * moved the timed ping to a separate thread. bugzid: 654
+ * persist settings directly when they're changed, only persist settings
+ that actually changed, only instruct the device to persist the settings
+ in eeprom when something changed, and don't persist settings on exit.
+ bugzid: 715
+ * cec-config-gui: persist settings both in the eeprom and in the settings
+ xml file
+ * validate the input in CCECProcessor::IsActiveSource(). fixes potential
+ crash when the active source isn't known. bugzid: 671
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 16 Apr 2012 18:03:00 +0100
+
+libcec (1.5-4) unstable; urgency=low
+
+ * changed/added:
+ * OS-X installation requirements and pointer
+ * full v2 firmware support:
+ * ping the adapter every 15 seconds. bugzid: 541
+ * added v2 msgcodes. bugzid: 543
+ * implemented the write methods for the v2 configuration. bugzid: 543
+ * included the logical addresses in the persisted configuration for v2.
+ bugzid: 543
+ * persist the configuration before closing the connection. only try to
+ persist the configuration when talking to a v2 firmware. bugzid: 543
+ * added GetSetting() to CUSBCECAdapterCommunication. bugzid: 543
+ * read the persisted settings from the ROM, and update it in
+ libcec_configuration if found. bugzid: 543
+ * cec-client: set bGetSettingsFromROM to 1 in cec-client. bugzid: 543
+ * cec-client: only read persisted EEPROM settings when -r or --rom is
+ provided as cmdline arg. bugzid: 543
+ * call SetControlledMode(false) as last command when closing the
+ connection in v2. bugzid: 542
+ * initial FreeBSD support: simply try to use ttyU*
+
+ * fixed:
+ * set controlled mode and retry to send the previous command if it failed
+ with MSGCODE_COMMAND_REJECTED
+ * m_iLineTimeout was never initialised and used. fixes MSGCODE_REJECTED
+ when transmitting a message and incorrect line timeouts being used
+ * mac configure compile bugzid: 157
+ * cec-config-gui: fixed application exit when the user clicked 'no' when
+ asked to reconnect. bugzid: 556
+ * only wait for multiple 'command accepted' response when sending a
+ transmit command, and only to 1 in other cases. bugzid: 543
+ * set the correct logical address mask before switching to autonomous mode.
+ bugzid: 543
+ * re-added SetLineTimeout(). bugzid: 543
+ * CUSBCECAdapterCommunication::SetControlledMode checked for the wrong sent
+ state
+ * os-x: don't add 0.5 before dividing in GetTimeMs()
+ * os-x: struct timespec now values weren't set correctly
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 16 Mar 2012 10:12:00 +0100
+
+libcec (1.5-3) unstable; urgency=low
+
+ * fixed:
+ * OS-X compilation
+ * default to firmware version 1 after 3 tries. some versions didn't send a
+ version.
+ * fixed cec-config win32 compilation
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 03 Mar 2012 15:21:00 +0100
+
+libcec (1.5-2) unstable; urgency=low
+
+ * changed/added:
+ * added Toshiba's vendor id, and set the device ID of the primary device to
+ Toshiba's and transmit it when starting
+ * lock in SyncedBuffer
+ * added a timeout to StopThread()
+ * also add commands to unsupported features when receiving
+ CEC_ABORT_REASON_REFUSED
+ * cec-config-gui: set cbPortNumber enabled when the physical address
+ override isn't checked instead
+ * cec-config-gui: added support for the new 'send inactive source' setting
+
+ * interface changes:
+ * added an 'send inactive source' option to libcec_configuration, only
+ supported by client/server 1.5.1 and up. bugzid: 439
+ * added a command to the interface to start the bootloader directly,
+ without going through all checks. bugzid: 218
+ * LibCecSharp: implemented support for the new 'send inactive source'
+ setting
+
+ * fixed:
+ * don't send an updated configuration when libCEC hasn't been initialised
+ fully. bugzid: 459
+ * don't send an updated configuration back when initialising. let the
+ client call the GetCurrentConfiguration() method. bugzid: 459
+ * configuration updates from libCEC. bugzid: 459
+ * fixed accidental double deref. the method parameter already does that.
+ github #24
+ * use CLOCK_MONOTONIC for timing info, since gettimeofday is affected by
+ ntp and by manually adjusting the system time
+ * the timeout value of pthread_cond_timedwait has to be referenced to
+ CLOCK_REALTIME
+ * don't add data to the input buffer in CUSBCECAdapterCommunication before
+ it's fully initialised
+ * fixed return value of CUSBCECAdapterCommunication::ParseMessage(). fixes
+ messages not being parsed in certain occasions
+ * don't try to transmit when the processor is being stopped
+ * set the server version in the LibCEC's constructor, since this is
+ checked by clients. fixes 'invalid libCEC version' popup when inserting
+ the adapter
+ * don't wait for the full timeout to pass in CCECProcessor::
+ OpenConnection(), but retry to connect 2 times. fixes 'port busy' errors
+ when initialising libCEC. bugzid: 436
+ * use the correct Sleep() method in CCECProcessor::OpenConnection(). the
+ thread hasn't been started there yet, so the sleep wasn't working. fixes
+ 'device or resource busy' when plugging in the adapter. bugzid: 436
+ * check the adapter ping and firmware before starting the reader thread, so
+ we really leave the com port alone for a second when it fails because of
+ a busy error. bugzid: 436
+ * ensure that the connection is really closed before retrying to connect.
+ bugzid: 436
+ * LibCecSharp: recreate the delegates properly when (re)connecting to
+ LibCecSharp
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 28 Feb 2012 21:19:00 +0100
+
+libcec (1.5-1) unstable; urgency=low
+
+ * changed/added:
+ * a new libcec_configuration structs, which allows the client app to pass
+ a number of new options, like waking multiple devices on startup,
+ overriding the vendor id, etc.
+ * a new configuration GUI for Windows (.NET). this allows you to set
+ libCEC's configuration for XBMC in a convenient GUI.
+ * a CLI configuration tool (unfinished) for other platforms. will be
+ finished in an update.
+ * implemented power up for LG devices other than a TV
+ * win32: don't install libcec to the system directory by default, and
+ delete previous (testing) copies if present
+ * wait for multiple responses, not just for one at a time
+ * set the ackmask to 0 when closing the connection
+ * don't send 'image view on' when calling SetActiveSource()
+ * don't send power on, acitve source and standby commands by default in
+ cec-client
+ * platform: added CTryLockObject
+ * platform: added an Init() method in CTimeout, so it can be reset
+
+ * interface changes:
+ * added a new initialiser method: CecInitialise()/cec_initialise(), that
+ accepts a "libc_configuration" struct as parameter. this way, the
+ signature of the init method can stay the same when adding new options.
+ in LibCecSharp, the new method appears as a new constructor.
+ * added CanPersistConfiguration()/cec_can_persist_configuration()
+ * added PersistConfiguration()/cec_persist_configuration()
+ * added GetCurrentConfiguration()/cec_get_current_configuration()
+ * added SetConfiguration()/cec_set_configuration()
+ * added GetLogicalAddresses()/cec_get_logical_addresses(): returns the list
+ of addresses controlled by libCEC
+ * added RescanDevices()/cec_rescan_devices(): lets libCEC force polls to
+ all logical addresses.
+ * added a callback that is called when libCEC's configuration changed.
+ * moved the autodetect address api call to libcec_configuration. only send
+ power up commands to non-tv devices when the power state is not
+ on/transition->on. let players call the power up/power down command.
+ * return the anynet return keycode directly instead of translating it to
+ 'return' for v1.5.0+ clients
+ * extracted CecSharpTypes.h in LibCecSharp. LibCecSharp is now in the
+ CecSharp namespace
+ * include the local cectypes.h in cec.h and cecc.h instead of system wide
+ * deprecated GetLibVersion() methods. use libcec_configuration instead
+ * removed deprecated CECCreate() method
+
+ * fixed:
+ * fixed a lot of LG specific issues
+ * fixed OS-X compilation. credits: Dustin Cooper
+ * fixed a couple of possible deadlocks, e.g. when closing the connection
+ while receiving data
+ * cleaned up existing code
+ * libCEC no longer puts incoming data in a fifo buffer, but tries to
+ process it directly, which fixes issues like libCEC blocking processing
+ new commands while waiting for transmission acks.
+ * 'unsupported command' marking in CCECBusDevice
+ * ensure that the ackmask is always set to 0 when closing the connection
+ and that the call doesn't block the Close() call
+ * don't try to read or write in CUSBCECAdapterCommunication when the
+ connection has been closed
+ * LibCecSharp: added quotes to the linker statement for libcec.lib. fixes
+ compilation in paths with spaces. closes #20
+ * LibCecSharp: set the callback methods in libcec to NULL before closing
+ the connection, since these might already have been destroyed in .NET
+ * LibCecSharp: delete the internal callback struct when closing the
+ connection
+ * LibCecSharp: pass correctly formatted logical address lists
+ * ensure that the vendor id is requested first when requesting info from a
+ device, so we are using the correct handler
+ * keep the 'busy state' of the command handler in CCECBusDevice
+ * poll the next device when the current is handled by libCEC.
+ * check the vendor id of a device before sending a power on command
+ * ensure that there always is at least one device type set
+ * transmit a keypress and key release as power on command when the target
+ device isn't the TV
+ * don't do a full reinit when not needed
+ * fix active source switches for the standard CEC implementation
+ * ensure that we don't send data to ourself
+ * check whether the port is open, not whether libCEC is initialised in
+ Transmit()
+ * platform: fixed return value from CCondition::Wait()
+ * platform: don't broadcast but wake one thread in
+ CProtectedSocket::MarkReady()
+ * platform: include stdint.h in windows/os-types.h instead of typedef'ing
+ ints
+ * platform: fixed tcp socket error handling and return value.
+ * platform: fixed return values of socket operations in lib/platform
+ * platform: added predicate in CCondition
+ * deleted the signed driver from the tree, since that doesn't work. let the
+ installer create a new signed driver on the production build system
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 19 Feb 2012 01:04:00 +0100
+
+libcec (1.4-4) unstable; urgency=low
+
+ * changed/added:
+ * added tcp client sockets to lib/platform (WIP)
+ * clean up lib/platform
+ * added: set controlled mode on after opening a connection to the adapter
+ (for firmware v2)
+ * added an IAdapterCommunicationCallback interface an use a callback method
+ to pass newly received cec_commands to CCECProcessor
+ * added "driver only" and "driver + libcec" sections to the installer
+ * added a signed driver
+ * created a separate driver installer, which is included in the libCEC
+ installer. uninstalls the old unsigned version of libCEC and the driver
+ when it's found and installs the new one in C:\Program Files(x86)\
+ Pulse Eight\USB-CEC Adapter.
+ * don't sign development binaries with a temporary key. devs can do that
+ themselves when they want LibCecSharp in the GAC
+ * interface changes:
+ * added SetStreamPath()/cec_set_stream_path_logical()/
+ cec_set_stream_path_physical() to the interface, to send a
+ "set stream path" command over the CEC bus, used to activate another
+ source.
+ * fixed:
+ * transmit 'menu state activated' after the stream path has been set to a
+ device that is handled by libCEC. should fix remote commands not working
+ properly on Panasonic TVs and after another source has been active.
+ bugzid: 233
+ * set the ackmask to 0x0 when trying to find a free logical address
+ * keep trying to reconnect to the com port until the timeout runs out.
+ bugzid: 230
+ * wait 500 ms before trying to retransmit a command. always wait for the
+ result of a transmission in CCECCommandHandler::Transmit()
+ * receive and send full cec_commands, not CCECAdapterMessages in
+ CAdapterCommunication. extract an IAdapterCommunication interface. fixed
+ potentially missed data in CAdapterCommunication
+ * close and delete the connection when the processor thread ends. fixes
+ reconnect after standby (access denied / connection already opened)
+ * don't replace handlers when not initialised, or the primary device's
+ logical addres isn't known yet, which can lead to crashes. don't call
+ handlers directly in CCECProcessor without holding a lock on them
+ * fixed possible crash when command handler were switched while it was
+ being used
+ * keep the mutex locked when calling ReplaceHandlers() in CCECProcessor
+ * win32: also timeout when data is received in SocketRead()
+ * win32: fixed < vista runtime and compilation
+ * win32: ping the adapter and request the firmware version in
+ CUSBCECAdapterCommunication instead of CCECProcesssor. fixes failed
+ libCEC inits
+ * win32: fixed crash on exit in LibCecSharp
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 6 Feb 2012 14:26:00 +0100
+
+libcec (1.4-3) unstable; urgency=low
+
+ * fixed:
+ * try to ping the device and grab the firmware version until the connect
+ timeout runs out. fixes failed reconnect after standby, when the adapter
+ is still being initialised
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 27 Jan 2012 13:05:00 +0100
+
+libcec (1.4-2) unstable; urgency=low
+
+ * changed/added:
+ * added a firmware flash script for linux.
+ usage: ./support/cec-flash-device.sh /path/to/firware.hex
+ * refactored threading/locking - added windows native instead of
+ pthread-win32, so we can compile native x64 too
+ * check whether the adapter responds when connecting to it and report the
+ firmware version of the adapter after connecting
+ * moved create-installer.cmd to support/
+ * completely removed AM_SILENT_RULES
+ * interface changes:
+ * compile LibCecSharp against .NET framework 2.0 and sign the assembly
+ * fixed:
+ * only the key release events were sent, not keypresses, which appeared in
+ clients as laggy keypresses
+ * fixed reconnect after standby
+ * wait for active tranmission to finish when opening a connection to the
+ adapter. fixes initialisation errors
+ * set the default transmit timeout properly instead of using 0
+ * fixed possible deadlock because of a negative timeout in
+ CAdapterCommunication::WaitForTransmitSucceeded()
+ * fixed error message in cec-client (unable to open the device on port ...)
+ * exit cec-client after entering bootloader mode
+ * MSGCODE_START_BOOTLOADER doesn't respond with MSGCODE_COMMAND_ACCEPTED
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 25 Jan 2012 23:28:00 +0100
+
+libcec (1.4-1) unstable; urgency=low
+
+ * changed/added:
+ * added the vendor id for Sony
+ * always refresh the power state of a device when it hasn't been updated
+ for 30 seconds
+ * do silent builds by default
+ * interface changes:
+ * added optional callback methods to libCEC. enable them by calling
+ EnableCallbacks(ICECCallbacks *callbacks) /
+ cec_enable_callbacks(ICECCallbacks *callbacks). after this method is
+ called, the GetNext...() methods will not return any data
+ * added the same callbacks to LibCecSharp. implement CecCallbackMethods
+ and override the methods in there
+ * fixed:
+ * use the given timeout when trying to open a connection to the CEC
+ adapter
+ * resolved difference between method name in LibCECC.cpp and cecc.h.
+ credits: Doug Johnson
+ * don't transmit physical addresses while holding a lock in CCECProcessor
+ * don't hold a lock when sending an active source message.
+ * unload libCEC when the lib version is invalid
+ * "unused" warnings suppressed
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 12 Jan 2012 19:06:00 +0100
+
+libcec (1.3-3) unstable; urgency=low
+
+ * changed/added:
+ * place in libudev include in an extern C block. fixes compilations on
+ older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann
+ * added pkg-config to the dependencies list. issue #15
+ * updated README. closes #14
+ * added a script that tests some basic functions of the CEC adapter:
+ /support/cec-test-device.sh
+ * fixed:
+ * don't make libCEC the active source when changing the physical address.
+ don't send active source messages on startup, when not the active source
+ fixes unwanted device power ups
+ * replace the command handler directly after receiving a changed vendor
+ id. change the primary type from recording device to playback device
+ for panasonic TVs
+ * don't send a deck status update when sending an active source message
+ for panasonic TVs
+ * only switch handlers once when using the generic handler
+ * don't switch handlers when not needed
+ * hold a lock in CCECProcessor::SetHDMIPort()
+ * don't send deck status updates when sending an active source message by
+ default
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 3 Jan 2012 22:48:00 +0100
+
+libcec (1.3-2) unstable; urgency=low
+
+ * changed/added:
+ * copy libcec.dll to the XBMC installation dir when XBMC is found
+ * disable background polling. let the client request this info when needed
+ * update the power status of a device when it's set to
+ CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON
+ * wait for the correct response when requesting something, not just any
+ response
+ * don't keep trying the same command/request after receiving a feature
+ abort message
+ * interface changes:
+ * change the previously unused boolean parameter in volume control methods
+ to bSendRelease, and only send a key release when it's true. default to
+ true
+ * fixed:
+ * don't send the power up/down keypress to listeners when in the initial
+ device state (powered off). fixes unexpected shutdown in XBMC when
+ connecting to the CEC adapter.
+ * send a 'menu state activated' command when starting up. bugzid: 113
+ * don't wait for a response when not needed
+ * don't hold a lock while waiting for a response. fixes failed libCEC
+ inits and slow responses
+ * don't replace a command handler when it's being used. fixes possible
+ crash on startup
+ * don't try to do anything before the processor thread has started
+ * don't transmit active source messages when the physical address is
+ still 0xFFFF
+ * don't init the default handler before the physical address is known
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 29 Dec 2011 03:05:00 +0100
+
+libcec (1.3-1) unstable; urgency=low
+
+ * changed/added:
+ * make libudev optional. if libudev is not available on linux, adapter
+ autodetection will also not be available. fixes compilation on Hardy/ATV1
+ * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET
+ language
+ * added vendor support for LG
+ * added vendor support for Philips
+ * added vendor support for Yamaha
+ * added vendor support for Onkyo
+ * added 'scan' command to cec-client, that displays info about devices on
+ the bus. made all ToString() methods available on the interface.
+ * added '-s' or '--single-command' to cec-client. starting cec-client with
+ this parameter executes a single command in cec-client and does not power
+ on devices on startup and power them off on exit. this way, you can use
+ cec-client in a shell script. since there's some handshaking involved at
+ startup, this is not very fast. to execute a command and only display the
+ result and any error/warning, execute it with
+ RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch
+ files are a bit different)
+ * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to
+ cec-client's parameters
+ * handle image view on and text view on
+ * handle routing information and report physical address opcodes
+ * handle audio status updates
+ * send ping and bootloader commands via the output queue
+ * scan the CEC bus for devices when starting libcec
+ * pass all commands that are directed at libcec to listeners
+ * interface changes:
+ * added GetActiveSource()/cec_get_active_source()
+ * added IsActiveSource()/cec_is_active_source()
+ * added GetDevicePhysicalAddress()/cec_get_device_physical_address()
+ * added GetDeviceOSDName()/cec_get_osd_name()
+ * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/
+ cec_send_key_release()
+ * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(),
+ MuteAudio()/cec_mute_audio()
+ * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/
+ cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type().
+ * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load
+ and when a device with the same physical address is detected, libcec will
+ use the selected hdmi port on that device. should fix source selection on
+ other devices, like an amplifier
+ * added a hook in libcec for physical address autodetection
+ * fixed:
+ * don't request the physical address from the tv (it's always 0x0000)
+ * set the proper ackmask before doing anything else
+ * don't unlock the transmit mutex in CCECProcessor while waiting for an
+ answer
+ * fix device polling
+ * refactor CEC read/write. keep a single lock for all writes, not one per
+ device
+ * ignore other data while waiting for a response
+ * retry failed tranmissions
+ * don't delete a message before it's been sent when starting the bootloader
+ * or when sending a ping
+ * fixed possible segfault when switching the command handler after a vendor
+ * id changed
+ * handle audio opcodes correctly
+ * inactive source should be directly addressed at the TV
+ * don't report a changed physical address when it hasn't changed
+ * routing information sets the stream path, not the physical address
+ * don't scan the whole bus in CCECProcessor::IsActiveDeviceType()
+ * don't request the vendor id from devices that are handled by libcec
+ * mark device status as present when a command was received from a device
+ * always send a power on command in CCECBusDevice::PowerOn()
+ * don't request updates statusses unless needed
+ * report physical address sends 3 parameters, not 2. check whether the
+ device type is correct
+ * devices can send vendor commands from other vendors, so don't assume the
+ device is of a certain vendor when it sends commands with a vendor id
+ * thread safety fixes. bugzid: 19
+ * clear any previous input when opening a connection to the adapter.
+ bugzid: 54
+ * use the correct source address in CSLCommandHandler::HandleVendorCommand()
+ * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5
+ * renamed enum methods. fixes potential macro collision with isset().
+ thanks davilla
+ * don't change the active device when receiving stream path changed
+ messages. fixes wrong source selection when powering after the TV.
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 09 Dec 2011 12:16:00 +0100
+
+libcec (1.2-1) unstable; urgency=low
+
+ * bugfixes:
+ * pass the deck_control command to libcec listeners
+ * check whether the initiator is valid in CCECProcessor::ParseCommand().
+ fixes possible segfault when parsing invalid data
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 12 Nov 2011 13:36:00 +0100
+
+libcec (1.1-3) unstable; urgency=low
+
+ * fixed return value in CCECProcessor::SetStreamPath(), which prevented
+ active source and menu state from being sent
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 23:36:00 +0100
+
+libcec (1.1-2) unstable; urgency=low
+
+ * forgot to update the headers to v1.1
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 18:56:00 +0100
+
+libcec (1.1-1) unstable; urgency=low
+
+ * interface changes:
+ * added logical address autodetection and let libcec handle multiple types
+ simultaniously. for logical address autodetection, you have to use
+ CECInit()/cec_init_typed() instead of CECCreate()/cec_init()
+ * added SetActiveSource()/cec_set_active_source() to the interface.
+ deprecated SetActiveView()/cec_set_active_view()
+ * added SetMenuState()
+ * added PollDevice()/cec_poll_device()
+ * removed duplicate method SetActiveSource() / SetActiveView()
+ * added SetDeckControlMode() and SetDeckInfo()
+ * fixed:
+ * added vendor detection for panasonic and broadcast active view and set
+ menu state when a panasonic device sets the stream path. thanks for the
+ pointer cptcoconut.
+ * added vendor code for pioneer
+ * osd string is 13 chars max. don't send more
+ * send the correct cec version for each device
+ * switch to panasonic specific cec implementation if a panasonic device was
+ detected
+ * send the correct device type in TransmitPhysicalAddress()
+ * send a reply from the correct device when the stream path is requested
+ * opcode 0x80 means the stream path changed, not the physical address
+ * don't poll for a vendor ID in monitoring mode
+ * fixed parameter parsing in SetVendorId()
+ * buffer up commands that are received while waiting for an ack. only send
+ 'active source' message for the actual active source
+ * win32: prepend the com port path with '\\.\', so com ports > 9 can be
+ accessed. thanks smolesen
+ * audio systems cannot be an active source, so don't transmit active
+ source message from this device
+ * only send 'active source' when powered on
+ * only set the osd name for the primary device. use default values for
+ others
+ * increase physical address with 0x100 per device
+ * win32: removed unneeded afxres.h include in the resource files, which
+ is not present when using studio express. thanks Ghuron
+ * fixed C headers
+ * mark the active source as active and other devices as inactive
+ * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER
+ * transmit the menu state as (active) when the stream path is set
+ * changed:
+ * changed copyright of boblight files with permission of the original
+ author
+ * partial handling of audio related opcodes
+ * more consistent log messages
+ * set a device type and name for each CCECBusDevice
+ * keep a power and menu state per device
+ * renamed all Broadcast...() and Report...() methods to Transmit...()
+ * renamed SetOSDString() to TransmitOSDString()
+ * changed debug level of 'did not receive ack' from error to debug
+ * only set the power status to 'on' for the primary device
+ * moved method decriptions from cecc.h to cec.h
+ * only send a power on command when a device isn't on already and set
+ the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while
+ powering on
+ * handle CEC_OPCODE_STANDBY
+ * handle CEC_OPCODE_ACTIVE_SOURCE
+ * always start in standby mode and let the tv (or other device) send the
+ power on command
+ * renamed the last few enums
+ * handle deck related opcodes.
+ * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown'
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 17:42:00 +0100
+
+libcec (1.0-1) unstable; urgency=low
+
+ * interface changes:
+ * set lib interface version back to 1.0 and rename GetLibVersion() to
+ GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion()
+ * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor
+ version number to 1
+ * fixed:
+ * samsung's vendor specific remote keypresses don't send key releases. added
+ call to AddKey() directly after the keypress
+ * always reset the button press time in CLibCEC::AddKey()
+ * always wait for a signal in CCECProcessor::Transmit()
+ * changed:
+ * drop shared_ptr and use a normal pointer. removed boost dependency
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 04 Nov 2011 00:14:00 +0100
+
+libcec (0.8-2) unstable; urgency=low
+
+ * added 'libboost-dev' to build deps
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 23:31:00 +0100
+
+libcec (0.8-1) unstable; urgency=low
+
+ * interface changes:
+ * added GetDevicePowerStatus()/cec_get_device_power_status()
+ * added GetDeviceVendorId()/cec_get_device_vendor_id()
+ * added GetDeviceMenuLanguage()/cec_get_device_menu_language()
+ * added GetDeviceCecVersion()/cec_get_device_cec_version()
+ * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when
+ monitoring is enabled, the device will only log the data it received,
+ but will not respond to any message
+ * removed timeout parameter in Transmit() and included the ack timeout in
+ the cec_command struct
+ * made the vendor id -> vendor name translation available
+ * made CEC_LOG levels powers of 2
+ * introduced CEC_LOG_TRAFFIC log level
+ * fixed:
+ * set the correct ackmask on startup
+ * wait for ack while keeping a lock
+ * wait for the processor thread to start before continueing on startup
+ * wait for messages to be transmitted before continueing in
+ CCECProcessor::Transmit()
+ * only set the logical address once when it has changed
+ * correct source for broadcast messages
+ * win32: create Release type installer
+ * changed:
+ * make all reads and write in CAdapterCommunication go through buffers.
+ * poll for a vendor ID of connected devices and switch to a non-standard
+ CEC implementation if needed.
+ * added vendor detection of Samsung and LG devices
+ * handle samsung remote command 'return'
+ * cec-client:
+ * added -la and --logical-address to the command line params
+ * added -d and --log-level params to cec-client
+ * added -sf and --short-log-file, which only log the actual messages, not
+ the level and timestamp
+ * added -f and --log-file parameters to cec-client
+ * added option to change the log level to cec-client
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 22:58:00 +0100
+
libcec (0.7-1) unstable; urgency=low
* send a keypress with 0 duration when a key is pressed and with a duration