+libcec (1.7.1-1) unstable; urgency=low
+
+ * changed/added:
+ * added physical address detection via ADL for AMD graphics cards
+ * attempt to get the edid from nvidia's graphics card driver on linux via
+ /proc/acpi/video/NGFX/HDMI/EDID
+ * attempt to get the PA from the registry on windows if we fail to get the
+ physical address from the display driver
+ * changed the order in CCECClient::SetPhysicalAddress() so it first checks
+ whether a PA override is set in libcec_configuration.iPhysicalAddress,
+ then checks whether the address can be detected, and if both failed it'll
+ use the HDMI port + base device setting
+ * cec-client: only active the source when reconnecting if libcec was the
+ active source before closing the connection
+ * platform: added tcp server sockets for posix
+
+ * interface changes:
+ * libcec_configuration.bAutodetectAddress is now read-only, and will be set
+ to 1 by libCEC if the PA was autodetected
+ * LibCecSharp: don't use an int but a CecUserControlCode in a CecKeypress
+
+ * fixed:
+ * don't unregister clients in CLibCEC when disconnecting, but only in
+ CCECProcessor. fixes reconnect after close
+ * MSGCODE_TIMEOUT_ERROR is a response to a transmission
+ * retry 'activate source' every 10 seconds if it failed
+ * don't respond with a poll from the broadcast address when receiving
+ in CSLCommandHandler::HandleDeviceVendorId(), but use the primary LA of
+ the client as source instead
+ * hold a lock when changing the ackmask in
+ CUSBCECAdapterCommunication::Open
+ * don't respond with a feature abort to opcode play messages. bugzid: 873
+ * get the vendor id of the TV before allocating logical addresses, so we
+ can determine if the TV supports the requested device type directly
+ * TransmitImageViewOn() and TransmitActiveSource() always returned true,
+ even if sending the command failed, so the retry for failed source
+ activations was never triggered
+ * open libcec.so.1 instead of libcec.so in cecloader.h. credits @coling.
+ github issue #30.
+ * fixed missing firmware version and build date in cec-client -l /
+ GetDeviceInformation()
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 10 Jun 2012 13:39:00 +0100
+
+libcec (1.6.1-5) unstable; urgency=low
+
+ * synced /debian directory with the one in precise (with a couple of changes)
+ * changed/added:
+ * serial port locking on linux
+ * cec-client: added -m/--monitor startup options, which will start a
+ monitor-only client. use 'mon 0' to switch to a normal client
+ * display an alert message when the firmware of the adapter can be upgraded
+ * added CEC 1.4 opcodes
+ * send a feature abort again for all unhandled commands
+ * refactored CLibCEC so a client registers itself within CCECProcessor,
+ which then allocates one or more logical addresses for it.
+
+ * interface changes:
+ * added a new setting, bMonitorOnly, which will start a monitor-only client
+
+ * fixed:
+ * ensure that we don't crash out when trying to stop a thread that hasn't
+ been started yet
+ * don't send a 'disconnected' alert when the close method is called
+ * use the correct source when transmitting an abort message as a reposonse
+ to a vendor command with id
+ * removed statics
+ * check the client version, not the server version in
+ libcec_configuration::operator==()
+ * cec-config: fix physical address detection
+ * LibCecSharp: fixed buffer overrun when copying libcec_configuration.
+ fixes crash when trying to save the configuration in the config gui.
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 14 May 2012 22:39:00 +0100
+
+libcec (1.6.1-2) unstable; urgency=low
+
+ * Build depends on pkg-config. (Closes: #669919)
+ * libudev-dev only optionally needed for Linux.
+
+ -- Andres Mejia <amejia@debian.org> Sat, 21 Apr 2012 19:03:19 -0400
+
+libcec (1.6.1-1) unstable; urgency=low
+
+ [ Mario Limonciello ]
+ * New upstream version (LP: #982272)
+
+ [ Andres Mejia ]
+ * New release fixes build failure with GCC-4.7. (Closes: #667241)
+ * Bump to Standards-Version 3.9.3.
+
+ -- Andres Mejia <amejia@debian.org> Sat, 21 Apr 2012 00:02:08 -0400
+
+libcec (1.3.2-3) unstable; urgency=low
+
+ * Make dpkg-source options default for packaging.
+
+ -- Andres Mejia <amejia@debian.org> Tue, 10 Jan 2012 18:12:57 -0500
+
+libcec (1.3.2-2) unstable; urgency=low
+
+ * Add options to pass to dpkg-source.
+
+ -- Andres Mejia <amejia@debian.org> Sun, 08 Jan 2012 22:59:34 -0500
+
+libcec (1.3.2-1) unstable; urgency=low
+
+ * Initial release. (Closes: #655143)
+
+ -- Andres Mejia <amejia@debian.org> Sun, 08 Jan 2012 15:36:49 -0500
+
+libcec (1.6-3) unstable; urgency=low
+
+ * changed/added:
+ * cec-client: show the firmware build date if available in cec-client -l
+ * cec-client: don't activate the source when starting
+ * cec-client: group up the output of the 'scan' command, and add the
+ currently active source to the output
+ * log the libCEC version in the 'connected to the CEC adapter' log entry,
+ and add the firmware build date to the line if it's available, so all
+ relevant version info is available in 1 log line.
+ * async writes for CUSBCECAdapterCommunication. less locks and polls, more
+ speed
+ * added 'make docs' target, that updates the doxygen documentation
+
+ * interface changes:
+ * added operator == and != for libcec_configuration
+ * added GetResponseOpcode(cec_opcode opcode) to cec_command
+ * added the firmware build date to libcec_configuration, so it can be
+ displayed by the client too.
+ * added static CLibCEC::Alert() method and CEC_ALERT_CONNECTION_LOST value
+ * added a callback to handle menu state changes. if the callback method
+ returns 1, then the change is processed by the CCECBusDevice too. if 0,
+ then the CCECBusDevice will always have menu state 'activated', so
+ keypresses are routed. bugzid: 724
+ * added a default menu language to libcec_configuration and set this
+ language for devices controlled by libcec. bugzid: 69
+
+ * fixed
+ * CCECProcessor::IsActiveSource() - TV was never checked
+ * don't call the deprecated SetActiveView() method in cec-client
+ * request the active source if unknown in CCECProcessor::GetActiveSource()
+ * don't try to match a device with PA 0xFFFF.
+ * don't change the power status of a device when changing the stream path
+ * don't set the power status to 'powered off' when marking the source
+ managed by libcec as inactive, or the tv will might send a power control
+ keycode when making it active again, potentially shutting down the system
+ * potential segfault in CCECProcessor::GetDeviceByPhysicalAddress()
+ * stream path changes when changed to the TV source (PA 0)
+ * clear the unsupported features list in CCECBusDevice::ResetDeviceStatus()
+ * never mark vendor commands as unsupported (only some may be unsupported),
+ as well as some others that should never be marked unsupported
+ * don't retry in CCECCommandHandler if the command has been marked as
+ unsupported
+ * don't request the PA of devices when handling an incoming CEC command, or
+ it'll block things while waiting for a response. if that response never
+ comes, or comes late, then other incoming commands will be timed out
+ before they are handled
+ * optimisation - strip unneeded virtual keywords from top level
+ implementations
+ * use the vlcommandhandler for the primary device that is handled by libCEC
+ when a panasonic tv is detected, so delayed activate source commands are
+ using the correct handler. bugzid: 723
+ * set the power status of device controlled by libCEC to
+ CEC_POWER_STATUS_ON
+ instead of IN_TRANSITION_STANDBY_TO_ON. reset the device status of a
+ device if it was detected as removed. bugzid: 755
+ * potentially uninitialised values in cec_command
+ * delay the 'active source' command for panasonic, until the vendor command
+ that reports that the TV is powered on has been received. bugzid: 723
+ * only respond to Give Physical Address with Report Physical Address.
+ bugzid: 592
+ This fixes several reports of the TV improperly switching to the libcec
+ device after it has previously switched to another source. Fix confirmed
+ with Panasonic and also reported to be an issue with Samsung and
+ Philips.
+ * check whether callback methods are set to a valid ptr
+ * number of retries for polls
+ * win32: fix build in paths with spaces. bugzid: 730
+ * LibCecSharp: free the alert GC callback when cleaning up
+ * the wrong setting was being read when powering on devices
+ * close the connection when a comm error was detected, and notify the
+ client via an alert
+ * don't segfault when calling ThreadsWait() without a valid thread
+ * lib/platform: fixed memleak
+ * leak in CCECAdapterMessageQueue::Write
+ * don't send commands if we know them to be unsupported. bugzid: 725
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Apr 2012 11:30:00 +0100
+
libcec (1.6-2) unstable; urgency=low
* fixed:
repositories / deb_libcec.git / blobdiff