+libcec (1.6-3) unstable; urgency=low
+
+ * changed/added:
+ * cec-client: show the firmware build date if available in cec-client -l
+ * cec-client: don't activate the source when starting
+ * cec-client: group up the output of the 'scan' command, and add the
+ currently active source to the output
+ * log the libCEC version in the 'connected to the CEC adapter' log entry,
+ and add the firmware build date to the line if it's available, so all
+ relevant version info is available in 1 log line.
+ * async writes for CUSBCECAdapterCommunication. less locks and polls, more
+ speed
+ * added 'make docs' target, that updates the doxygen documentation
+
+ * interface changes:
+ * added operator == and != for libcec_configuration
+ * added GetResponseOpcode(cec_opcode opcode) to cec_command
+ * added the firmware build date to libcec_configuration, so it can be
+ displayed by the client too.
+ * added static CLibCEC::Alert() method and CEC_ALERT_CONNECTION_LOST value
+ * added a callback to handle menu state changes. if the callback method
+ returns 1, then the change is processed by the CCECBusDevice too. if 0,
+ then the CCECBusDevice will always have menu state 'activated', so
+ keypresses are routed. bugzid: 724
+ * added a default menu language to libcec_configuration and set this
+ language for devices controlled by libcec. bugzid: 69
+
+ * fixed
+ * CCECProcessor::IsActiveSource() - TV was never checked
+ * don't call the deprecated SetActiveView() method in cec-client
+ * request the active source if unknown in CCECProcessor::GetActiveSource()
+ * don't try to match a device with PA 0xFFFF.
+ * don't change the power status of a device when changing the stream path
+ * don't set the power status to 'powered off' when marking the source
+ managed by libcec as inactive, or the tv will might send a power control
+ keycode when making it active again, potentially shutting down the system
+ * potential segfault in CCECProcessor::GetDeviceByPhysicalAddress()
+ * stream path changes when changed to the TV source (PA 0)
+ * clear the unsupported features list in CCECBusDevice::ResetDeviceStatus()
+ * never mark vendor commands as unsupported (only some may be unsupported),
+ as well as some others that should never be marked unsupported
+ * don't retry in CCECCommandHandler if the command has been marked as
+ unsupported
+ * don't request the PA of devices when handling an incoming CEC command, or
+ it'll block things while waiting for a response. if that response never
+ comes, or comes late, then other incoming commands will be timed out
+ before they are handled
+ * optimisation - strip unneeded virtual keywords from top level
+ implementations
+ * use the vlcommandhandler for the primary device that is handled by libCEC
+ when a panasonic tv is detected, so delayed activate source commands are
+ using the correct handler. bugzid: 723
+ * set the power status of device controlled by libCEC to
+ CEC_POWER_STATUS_ON
+ instead of IN_TRANSITION_STANDBY_TO_ON. reset the device status of a
+ device if it was detected as removed. bugzid: 755
+ * potentially uninitialised values in cec_command
+ * delay the 'active source' command for panasonic, until the vendor command
+ that reports that the TV is powered on has been received. bugzid: 723
+ * only respond to Give Physical Address with Report Physical Address.
+ bugzid: 592
+ This fixes several reports of the TV improperly switching to the libcec
+ device after it has previously switched to another source. Fix confirmed
+ with Panasonic and also reported to be an issue with Samsung and
+ Philips.
+ * check whether callback methods are set to a valid ptr
+ * number of retries for polls
+ * win32: fix build in paths with spaces. bugzid: 730
+ * LibCecSharp: free the alert GC callback when cleaning up
+ * the wrong setting was being read when powering on devices
+ * close the connection when a comm error was detected, and notify the
+ client via an alert
+ * don't segfault when calling ThreadsWait() without a valid thread
+ * lib/platform: fixed memleak
+ * leak in CCECAdapterMessageQueue::Write
+ * don't send commands if we know them to be unsupported. bugzid: 725
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Apr 2012 11:30:00 +0100
+
+libcec (1.6-2) unstable; urgency=low
+
+ * fixed:
+ * fixed typo in CUSBCECAdapterCommands::RequestSettings() that prevented
+ the settings from being read. the settings were still written, but never
+ read when bGetSettingsFromROM = 1.
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Apr 2012 11:30:00 +0100
+
+libcec (1.6-1) unstable; urgency=medium
+
+ * changed/added:
+ * full firmware V2 support
+ * -o/--osdname argument for cec-client to set a custom osd name
+ * added the firmware version to cec-client's -l / --list-devices command.
+ bugzid: 631
+ * added power on command for Samsung AVR devices. bugzid: 361
+ * added buttoncode for 'channels list' on Samsung (0x96)
+ * don't check for the windows ddk when a prebuilt driver installer is
+ present
+ * respond to Get Menu Language. bugzid: 547. In the event that the menu
+ language is undefined in libcec (currently the default), the response
+ will be a feature abort.
+
+ * interface changes:
+ * added the firmware version to libcec_configuration (read-only). bumped
+ server version to 1.6.0. fixed 'unknown server version' message on
+ startup. bugzid: 631
+ * added a new setting to control whether to put the TV in standby when the
+ player is put in standby. added some missing bits (version numbers,
+ config) to LibCecSharp. bugzid: 558
+ * added an alert callback. bugzid: 462
+ * added bShutdownOnStandby to libcec_configuration. bugzid: 660. This
+ setting tells the client to shutdown when the TV switches off and is
+ complimentary to bPowerOffOnStandby, which tells the PC to suspend.
+ They are kept separate to maintain backwards compatability.
+
+ * fixed
+ * gcc 4.7 compilation
+ * poll doesn't have an opcode. bugzid: 591
+ * wait for MSGEND when data was received when opening the connection.
+ bugzid: 536
+ * mark the correct device as active source after a stream path change.
+ if the new address is not found, but the old address is, then mark the
+ old address as inactive. fixes TV switching back to the old active source
+ when it scans for devices. bugzid: 592
+ * ensure that the vendor ID is sent before trying to activate any SL device
+ bugzid: 574
+ * fixed possible crash when in CLibCEC::IsLibCECActiveSource() when libCEC
+ doesn't know which device is the active source. bugzid: 479
+ * correct handling CEC_USER_CONTROL_CODE_POWER. This ensures that the power
+ code always operates as a toggle, depending on the current state, and
+ that SetCurrentButton is always called for a valid user control code.
+ bugzid: 570
+ * frequency wasn't checked in GetTimeMs(), leading to incorrect wait times
+ on some windows systems
+ * refactored USB adapter communication. less locks, shorter locks, added
+ documentation, lots of clean ups and no more incoming messages that are
+ skipped
+ * the destructor of CSerialSocket didn't call Close()
+ * added guards in CSerialPort
+ * reset m_socket to INVALID_SERIAL_SOCKET_VALUE after closing the
+ connection
+ * always wait for thread exit in CThread's desctructor
+ * crash on exit after GetDeviceInformation()
+ * check whether the destination is valid before setting anything in
+ m_bWaitingForAck. fixes heap corruption and crash on exit. bugzid: 479
+ * bUseTVMenuLanguage from libcec_configuration wasn't copied in
+ SetConfiguration(), so this setting was reset to the default value
+ (enabled) every time. bugzid: 617
+ * request the vendor id of a device if needed when the device status is
+ changed into 'present'. bugzid: 361
+ * give priority to messages from the TV. removed the global lock in
+ CCECProcessor when sending. this is no longer needed. bugzid: 238
+ * add some bounds checking to the HDMI port number. bugzid: 508
+ * fixed usbser.sys copying in the driver .INF. bugzid: 503
+ * only update the physical address when it has actually changed. bugzid:
+ 672
+ * moved the static variables in os-threads from the header to a separate
+ cpp file, or it could lead to problems when included multiple times
+ * don't send an active source command when the physical address couldn't be
+ set, or it might confuse other CEC devices
+ * serial socket timeouts. bugzid: 654
+ * fixed possible crash when trying to request a vendor id of a device when
+ the address of libCEC isn't known yet. bugzid: 654
+ * extra guard so no commands are transmitted without a valid initiator.
+ bugzid: 654
+ * moved the timed ping to a separate thread. bugzid: 654
+ * persist settings directly when they're changed, only persist settings
+ that actually changed, only instruct the device to persist the settings
+ in eeprom when something changed, and don't persist settings on exit.
+ bugzid: 715
+ * cec-config-gui: persist settings both in the eeprom and in the settings
+ xml file
+ * validate the input in CCECProcessor::IsActiveSource(). fixes potential
+ crash when the active source isn't known. bugzid: 671
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 16 Apr 2012 18:03:00 +0100
+
+libcec (1.5-4) unstable; urgency=low
+
+ * changed/added:
+ * OS-X installation requirements and pointer
+ * full v2 firmware support:
+ * ping the adapter every 15 seconds. bugzid: 541
+ * added v2 msgcodes. bugzid: 543
+ * implemented the write methods for the v2 configuration. bugzid: 543
+ * included the logical addresses in the persisted configuration for v2.
+ bugzid: 543
+ * persist the configuration before closing the connection. only try to
+ persist the configuration when talking to a v2 firmware. bugzid: 543
+ * added GetSetting() to CUSBCECAdapterCommunication. bugzid: 543
+ * read the persisted settings from the ROM, and update it in
+ libcec_configuration if found. bugzid: 543
+ * cec-client: set bGetSettingsFromROM to 1 in cec-client. bugzid: 543
+ * cec-client: only read persisted EEPROM settings when -r or --rom is
+ provided as cmdline arg. bugzid: 543
+ * call SetControlledMode(false) as last command when closing the
+ connection in v2. bugzid: 542
+ * initial FreeBSD support: simply try to use ttyU*
+
+ * fixed:
+ * set controlled mode and retry to send the previous command if it failed
+ with MSGCODE_COMMAND_REJECTED
+ * m_iLineTimeout was never initialised and used. fixes MSGCODE_REJECTED
+ when transmitting a message and incorrect line timeouts being used
+ * mac configure compile bugzid: 157
+ * cec-config-gui: fixed application exit when the user clicked 'no' when
+ asked to reconnect. bugzid: 556
+ * only wait for multiple 'command accepted' response when sending a
+ transmit command, and only to 1 in other cases. bugzid: 543
+ * set the correct logical address mask before switching to autonomous mode.
+ bugzid: 543
+ * re-added SetLineTimeout(). bugzid: 543
+ * CUSBCECAdapterCommunication::SetControlledMode checked for the wrong sent
+ state
+ * os-x: don't add 0.5 before dividing in GetTimeMs()
+ * os-x: struct timespec now values weren't set correctly
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 16 Mar 2012 10:12:00 +0100
+
libcec (1.5-3) unstable; urgency=low
* fixed:
repositories / deb_libcec.git / blobdiff