#define CEC_BUTTON_TIMEOUT 500
#define CEC_POWER_STATE_REFRESH_TIME 30000
#define CEC_FW_VERSION_UNKNOWN 0xFFFF
+#define CEC_FW_BUILD_UNKNOWN 0
#define CEC_CONNECT_TRIES 3
+#define CEC_PHYSICAL_ADDRESS_TV 0
+#define CEC_MIN_PHYSICAL_ADDRESS 0x1000
+#define CEC_MAX_PHYSICAL_ADDRESS 0xFFFE
+#define CEC_INVALID_PHYSICAL_ADDRESS 0xFFFF
+
+#define CEC_MIN_VENDORID 1
+#define CEC_MAX_VENDORID 0xFFFFFE
+#define CEC_INVALID_VENDORID 0xFFFFFF
+
+#define CEC_MIN_HDMI_PORTNUMBER 1
+#define CEC_MAX_HDMI_PORTNUMBER 15
+#define CEC_HDMI_PORTNUMBER_NONE 0
+
#define CEC_DEFAULT_SETTING_USE_TV_MENU_LANGUAGE 1
#define CEC_DEFAULT_SETTING_ACTIVATE_SOURCE 1
#define CEC_DEFAULT_SETTING_POWER_OFF_SHUTDOWN 1
#define CEC_DEFAULT_SETTING_SEND_INACTIVE_SOURCE 1
#define CEC_DEFAULT_SETTING_POWER_OFF_DEVICES_STANDBY 1
#define CEC_DEFAULT_DEVICE_LANGUAGE "eng"
-#define CEC_DEFAULT_FIRMWARE_BUILD_DATE 0
+#define CEC_DEFAULT_SETTING_AUTODETECT_ADDRESS 1
+#define CEC_DEFAULT_SETTING_GET_SETTINGS_FROM_ROM 0
#define CEC_DEFAULT_TRANSMIT_RETRY_WAIT 500
#define CEC_DEFAULT_TRANSMIT_TIMEOUT 1000
-#define CEC_DEFAULT_TRANSMIT_WAIT 2000
+#define CEC_DEFAULT_TRANSMIT_WAIT 1000
#define CEC_DEFAULT_TRANSMIT_RETRIES 1
+#define CEC_DEFAULT_CONNECT_TIMEOUT 10000
+#define CEC_DEFAULT_CONNECT_RETRY_WAIT 1000
+#define CEC_SERIAL_DEFAULT_BAUDRATE 38400
+#define CEC_CLEAR_INPUT_DEFAULT_WAIT 1000
+
#define CEC_MIN_LIB_VERSION 1
#define CEC_LIB_VERSION_MAJOR 1
#define CEC_LIB_VERSION_MINOR 6
CEC_OPCODE_SYSTEM_AUDIO_MODE_REQUEST = 0x70,
CEC_OPCODE_SYSTEM_AUDIO_MODE_STATUS = 0x7E,
CEC_OPCODE_SET_AUDIO_RATE = 0x9A,
+
+ /* CEC 1.4 */
+ CEC_OPCODE_START_ARC = 0xC0,
+ CEC_OPCODE_REPORT_ARC_STARTED = 0xC1,
+ CEC_OPCODE_REPORT_ARC_ENDED = 0xC2,
+ CEC_OPCODE_REQUEST_ARC_START = 0xC3,
+ CEC_OPCODE_REQUEST_ARC_END = 0xC4,
+ CEC_OPCODE_END_ARC = 0xC5,
+ CEC_OPCODE_CDC = 0xF8,
/* when this opcode is set, no opcode will be sent to the device. this is one of the reserved numbers */
CEC_OPCODE_NONE = 0xFD
} cec_opcode;
case CEC_OPCODE_GIVE_DEVICE_VENDOR_ID:
return CEC_OPCODE_DEVICE_VENDOR_ID;
case CEC_OPCODE_GIVE_OSD_NAME:
- return CEC_OPCODE_GIVE_OSD_NAME;
+ return CEC_OPCODE_SET_OSD_NAME;
case CEC_OPCODE_MENU_REQUEST:
return CEC_OPCODE_MENU_STATUS;
case CEC_OPCODE_GIVE_DEVICE_POWER_STATUS:
break;
}
- return CEC_OPCODE_FEATURE_ABORT;
+ return CEC_OPCODE_NONE;
}
#endif
} cec_command;
*/
void Clear(void)
{
- primary = CECDEVICE_UNKNOWN;
+ primary = CECDEVICE_UNREGISTERED;
for (unsigned int iPtr = 0; iPtr < 16; iPtr++)
addresses[iPtr] = 0;
}
*/
bool IsEmpty(void) const
{
- return primary == CECDEVICE_UNKNOWN;
+ return primary == CECDEVICE_UNREGISTERED;
}
/*!
*/
void Set(cec_logical_address address)
{
- if (primary == CECDEVICE_UNKNOWN)
+ if (primary == CECDEVICE_UNREGISTERED)
primary = address;
addresses[(int) address] = 1;
* @brief Mark a logical address as 'unset'
* @param address The logical address to remove from this list.
*/
- void Unset(cec_logical_address address)
+ void Unset(const cec_logical_address address)
{
if (primary == address)
- primary = CECDEVICE_UNKNOWN;
+ primary = CECDEVICE_UNREGISTERED;
addresses[(int) address] = 0;
}
typedef enum libcec_parameter_type
{
- CEC_PARAMETER_TYPE_STRING
+ CEC_PARAMETER_TYPE_STRING,
+ CEC_PARAMETER_TYPE_UNKOWN
} libcec_parameter_type;
struct libcec_parameter
CEC_CLIENT_VERSION_1_5_3 = 0x1503,
CEC_CLIENT_VERSION_1_6_0 = 0x1600,
CEC_CLIENT_VERSION_1_6_1 = 0x1601,
- CEC_CLIENT_VERSION_1_6_2 = 0x1602
+ CEC_CLIENT_VERSION_1_6_2 = 0x1602,
+ CEC_CLIENT_VERSION_1_6_3 = 0x1603
} cec_client_version;
typedef enum cec_server_version
CEC_SERVER_VERSION_1_5_3 = 0x1503,
CEC_SERVER_VERSION_1_6_0 = 0x1600,
CEC_SERVER_VERSION_1_6_1 = 0x1601,
- CEC_SERVER_VERSION_1_6_2 = 0x1602
+ CEC_SERVER_VERSION_1_6_2 = 0x1602,
+ CEC_SERVER_VERSION_1_6_3 = 0x1603
} cec_server_version;
typedef struct libcec_configuration
uint8_t bShutdownOnStandby; /*!< shutdown this PC when the TV is switched off. only used when bPowerOffOnStandby = 0. added in 1.6.0 */
char strDeviceLanguage[3]; /*!< the menu language used by the client. 3 character ISO 639-2 country code. see http://http://www.loc.gov/standards/iso639-2/ added in 1.6.2 */
uint32_t iFirmwareBuildDate; /*!< the build date of the firmware, in seconds since epoch. if not available, this value will be set to 0. added in 1.6.2 */
+ uint8_t bMonitorOnly; /*!< won't allocate a CCECClient when starting the connection when set (same as monitor mode). added in 1.6.3 */
#ifdef __cplusplus
libcec_configuration(void) { Clear(); }
~libcec_configuration(void) { Clear(); }
+ bool operator==(const libcec_configuration &other) const
+ {
+ return ( clientVersion == other.clientVersion &&
+ !strncmp(strDeviceName, other.strDeviceName, 13) &&
+ deviceTypes == other.deviceTypes &&
+ bAutodetectAddress == other.bAutodetectAddress &&
+ iPhysicalAddress == other.iPhysicalAddress &&
+ baseDevice == other.baseDevice &&
+ iHDMIPort == other.iHDMIPort &&
+ tvVendor == other.tvVendor &&
+ wakeDevices == other.wakeDevices &&
+ powerOffDevices == other.powerOffDevices &&
+ serverVersion == other.serverVersion &&
+ bGetSettingsFromROM == other.bGetSettingsFromROM &&
+ bUseTVMenuLanguage == other.bUseTVMenuLanguage &&
+ bActivateSource == other.bActivateSource &&
+ bPowerOffScreensaver == other.bPowerOffScreensaver &&
+ bPowerOffOnStandby == other.bPowerOffOnStandby &&
+ bSendInactiveSource == other.bSendInactiveSource &&
+ /* libcec 1.5.3+ */
+ (other.clientVersion < CEC_CLIENT_VERSION_1_5_3 || logicalAddresses == other.logicalAddresses) &&
+ /* libcec 1.6.0+ */
+ (other.clientVersion < CEC_CLIENT_VERSION_1_6_0 || iFirmwareVersion == other.iFirmwareVersion) &&
+ (other.clientVersion < CEC_CLIENT_VERSION_1_6_0 || bPowerOffDevicesOnStandby == other.bPowerOffDevicesOnStandby) &&
+ (other.clientVersion < CEC_CLIENT_VERSION_1_6_0 || bShutdownOnStandby == other.bShutdownOnStandby) &&
+ /* libcec 1.6.2+ */
+ (other.clientVersion < CEC_CLIENT_VERSION_1_6_2 || !strncmp(strDeviceLanguage, other.strDeviceLanguage, 3)) &&
+ (other.clientVersion < CEC_CLIENT_VERSION_1_6_2 || iFirmwareBuildDate == other.iFirmwareBuildDate) &&
+ /* libcec 1.6.3+ */
+ (other.clientVersion < CEC_CLIENT_VERSION_1_6_3 || bMonitorOnly == other.bMonitorOnly));
+ }
+
+ bool operator!=(const libcec_configuration &other) const
+ {
+ return !(*this == other);
+ }
+
/*!
* @brief Reset this configution struct to the default values.
*/
void Clear(void)
{
- iPhysicalAddress = 0;
+ iPhysicalAddress = CEC_PHYSICAL_ADDRESS_TV;
baseDevice = (cec_logical_address)CEC_DEFAULT_BASE_DEVICE;
iHDMIPort = CEC_DEFAULT_HDMI_PORT;
tvVendor = (uint64_t)CEC_VENDOR_UNKNOWN;
clientVersion = (uint32_t)CEC_CLIENT_VERSION_PRE_1_5;
serverVersion = (uint32_t)CEC_SERVER_VERSION_PRE_1_5;
- bAutodetectAddress = 1;
- bGetSettingsFromROM = 0;
+ bAutodetectAddress = CEC_DEFAULT_SETTING_AUTODETECT_ADDRESS;
+ bGetSettingsFromROM = CEC_DEFAULT_SETTING_GET_SETTINGS_FROM_ROM;
bUseTVMenuLanguage = CEC_DEFAULT_SETTING_USE_TV_MENU_LANGUAGE;
bActivateSource = CEC_DEFAULT_SETTING_ACTIVATE_SOURCE;
bPowerOffScreensaver = CEC_DEFAULT_SETTING_POWER_OFF_SCREENSAVER;
iFirmwareVersion = CEC_FW_VERSION_UNKNOWN;
bPowerOffDevicesOnStandby = CEC_DEFAULT_SETTING_POWER_OFF_DEVICES_STANDBY;
memcpy(strDeviceLanguage, CEC_DEFAULT_DEVICE_LANGUAGE, 3);
- iFirmwareBuildDate = CEC_DEFAULT_FIRMWARE_BUILD_DATE;
+ iFirmwareBuildDate = CEC_FW_BUILD_UNKNOWN;
+ bMonitorOnly = 0;
memset(strDeviceName, 0, 13);
deviceTypes.clear();
repositories / deb_libcec.git / blobdiff