public CecSharpClient()
{
CecDeviceTypeList types = new CecDeviceTypeList();
- types.Types[0] = CecDeviceType.PlaybackDevice;
+ types.Types[0] = CecDeviceType.RecordingDevice;
Lib = new LibCecSharp("CEC Tester", types);
LogLevel = (int) CecLogLevel.All;
"================================================================================" + System.Environment.NewLine +
"Available commands:" + System.Environment.NewLine +
System.Environment.NewLine +
- "tx {bytes} transfer bytes over the CEC line." + System.Environment.NewLine +
- "txn {bytes} transfer bytes but don't wait for transmission ACK." + System.Environment.NewLine +
- "[tx 40 00 FF 11 22 33] sends bytes 0x40 0x00 0xFF 0x11 0x22 0x33" + System.Environment.NewLine +
- System.Environment.NewLine +
- "on {address} power on the device with the given logical address." + System.Environment.NewLine +
- "[on 5] power on a connected audio system" + System.Environment.NewLine +
- System.Environment.NewLine +
- "standby {address} put the device with the given address in standby mode." + System.Environment.NewLine +
- "[standby 0] powers off the TV" + System.Environment.NewLine +
- System.Environment.NewLine +
- "la {logical_address} change the logical address of the CEC adapter." + System.Environment.NewLine +
- "[la 4] logical address 4" + System.Environment.NewLine +
- System.Environment.NewLine +
- "pa {physical_address} change the physical address of the CEC adapter." + System.Environment.NewLine +
- "[pa 1000] physical address 1.0.0.0" + System.Environment.NewLine +
- System.Environment.NewLine +
- "osd {addr} {string} set OSD message on the specified device." + System.Environment.NewLine +
- "[osd 0 Test Message] displays 'Test Message' on the TV" + System.Environment.NewLine +
- System.Environment.NewLine +
- "ver {addr} get the CEC version of the specified device." + System.Environment.NewLine +
- "[ver 0] get the CEC version of the TV" + System.Environment.NewLine +
- System.Environment.NewLine +
- "ven {addr} get the vendor ID of the specified device." + System.Environment.NewLine +
- "[ven 0] get the vendor ID of the TV" + System.Environment.NewLine +
- System.Environment.NewLine +
- "lang {addr} get the menu language of the specified device." + System.Environment.NewLine +
- "[lang 0] get the menu language of the TV" + System.Environment.NewLine +
- System.Environment.NewLine +
- "pow {addr} get the power status of the specified device." + System.Environment.NewLine +
- "[pow 0] get the power status of the TV" + System.Environment.NewLine +
- System.Environment.NewLine +
- "poll {addr} poll the specified device." + System.Environment.NewLine +
- "[poll 0] sends a poll message to the TV" + System.Environment.NewLine +
- System.Environment.NewLine +
+ "[tx] {bytes} transfer bytes over the CEC line." + System.Environment.NewLine +
+ "[txn] {bytes} transfer bytes but don't wait for transmission ACK." + System.Environment.NewLine +
+ "[on] {address} power on the device with the given logical address." + System.Environment.NewLine +
+ "[standby] {address} put the device with the given address in standby mode." + System.Environment.NewLine +
+ "[la] {logical_address} change the logical address of the CEC adapter." + System.Environment.NewLine +
+ "[pa] {physical_address} change the physical address of the CEC adapter." + System.Environment.NewLine +
+ "[osd] {addr} {string} set OSD message on the specified device." + System.Environment.NewLine +
+ "[ver] {addr} get the CEC version of the specified device." + System.Environment.NewLine +
+ "[ven] {addr} get the vendor ID of the specified device." + System.Environment.NewLine +
+ "[lang] {addr} get the menu language of the specified device." + System.Environment.NewLine +
+ "[pow] {addr} get the power status of the specified device." + System.Environment.NewLine +
+ "[poll] {addr} poll the specified device." + System.Environment.NewLine +
+ "[scan] scan the CEC bus and display device info" + System.Environment.NewLine +
"[mon] {1|0} enable or disable CEC bus monitoring." + System.Environment.NewLine +
"[log] {1 - 31} change the log level. see cectypes.h for values." + System.Environment.NewLine +
- System.Environment.NewLine +
"[ping] send a ping command to the CEC adapter." + System.Environment.NewLine +
"[bl] to let the adapter enter the bootloader, to upgrade" + System.Environment.NewLine +
" the flash rom." + System.Environment.NewLine +
string command;
while (bContinue)
{
+ FlushLog();
Console.WriteLine("waiting for input");
command = Console.ReadLine();
{
if (splitCommand.Length > 1)
{
- ulong vendor = Lib.GetDeviceVendorId((CecLogicalAddress)byte.Parse(splitCommand[1], System.Globalization.NumberStyles.HexNumber));
- Console.WriteLine("Vendor ID: " + vendor);
+ CecVendorId vendor = Lib.GetDeviceVendorId((CecLogicalAddress)byte.Parse(splitCommand[1], System.Globalization.NumberStyles.HexNumber));
+ Console.WriteLine("Vendor ID: " + Lib.ToString(vendor));
}
}
else if (splitCommand[0] == "ver")
if (splitCommand.Length > 1)
{
CecVersion version = Lib.GetDeviceCecVersion((CecLogicalAddress)byte.Parse(splitCommand[1], System.Globalization.NumberStyles.HexNumber));
- switch (version)
- {
- case CecVersion.V1_2:
- Console.WriteLine("CEC version 1.2");
- break;
- case CecVersion.V1_2A:
- Console.WriteLine("CEC version 1.2a");
- break;
- case CecVersion.V1_3:
- Console.WriteLine("CEC version 1.3");
- break;
- case CecVersion.V1_3A:
- Console.WriteLine("CEC version 1.3a");
- break;
- case CecVersion.V1_4:
- Console.WriteLine("CEC version 1.4");
- break;
- default:
- Console.WriteLine("unknown CEC version");
- break;
- }
+ Console.WriteLine("CEC version: " + Lib.ToString(version));
}
}
else if (splitCommand[0] == "pow")
if (splitCommand.Length > 1)
{
CecPowerStatus power = Lib.GetDevicePowerStatus((CecLogicalAddress)byte.Parse(splitCommand[1], System.Globalization.NumberStyles.HexNumber));
- switch (power)
- {
- case CecPowerStatus.On:
- Console.WriteLine("powered on");
- break;
- case CecPowerStatus.InTransitionOnToStandby:
- Console.WriteLine("on -> standby");
- break;
- case CecPowerStatus.InTransitionStandbyToOn:
- Console.WriteLine("standby -> on");
- break;
- case CecPowerStatus.Standby:
- Console.WriteLine("standby");
- break;
- default:
- Console.WriteLine("unknown power status");
- break;
- }
+ Console.WriteLine("power status: " + Lib.ToString(power));
}
}
else if (splitCommand[0] == "r")
Console.WriteLine("setting active source");
Lib.SetActiveSource(CecDeviceType.PlaybackDevice);
}
+ else if (splitCommand[0] == "scan")
+ {
+ Console.WriteLine("CEC bus information");
+ Console.WriteLine("===================");
+ CecLogicalAddresses addresses = Lib.GetActiveDevices();
+ for (int iPtr = 0; iPtr < addresses.Addresses.Count(); iPtr++)
+ {
+ CecLogicalAddress address = (CecLogicalAddress)iPtr;
+ if (!addresses.IsSet(address))
+ continue;
+
+ CecVendorId iVendorId = Lib.GetDeviceVendorId(address);
+ bool bActive = Lib.IsActiveDevice(address);
+ ushort iPhysicalAddress = Lib.GetDevicePhysicalAddress(address);
+ string strAddr = string.Format("{0,4:X}", iPhysicalAddress);
+ CecVersion iCecVersion = Lib.GetDeviceCecVersion(address);
+ CecPowerStatus power = Lib.GetDevicePowerStatus(address);
+ string osdName = Lib.GetDeviceOSDName(address);
+ string lang = Lib.GetDeviceMenuLanguage(address);
+
+ StringBuilder output = new StringBuilder();
+ output.AppendLine("device #" + iPtr + ": " + Lib.ToString(address));
+ output.AppendLine("address: " + strAddr);
+ output.AppendLine("active source: " + (bActive ? "yes" : "no"));
+ output.AppendLine("vendor: " + Lib.ToString(iVendorId));
+ output.AppendLine("osd string: " + osdName);
+ output.AppendLine("CEC version: " + Lib.ToString(iCecVersion));
+ output.AppendLine("power status: " + Lib.ToString(power));
+ if (!string.IsNullOrEmpty(lang))
+ output.AppendLine("language: " + lang);
+
+ Console.WriteLine(output.ToString());
+ }
+ }
else if (splitCommand[0] == "h" || splitCommand[0] == "help")
ShowConsoleHelp();
else if (splitCommand[0] == "q" || splitCommand[0] == "quit")
bContinue = false;
else if (splitCommand[0] == "log" && splitCommand.Length > 1)
- LogLevel = int.Parse(splitCommand[1]);
-
- FlushLog();
+ LogLevel = int.Parse(splitCommand[1]);
}
}