CMutex g_outputMutex;
-CMutex g_responseMutex;
-CCondition g_responseCondtion;
+CEvent g_responseEvent;
cec_opcode g_lastCommand = CEC_OPCODE_NONE;
-CMutex g_keyMutex;
-CCondition g_keyCondtion;
+CEvent g_keyEvent;
cec_user_control_code g_lastKey = CEC_USER_CONTROL_CODE_UNKNOWN;
ICECCallbacks g_callbacks;
libcec_configuration g_config;
ICECAdapter * g_parser;
-cec_logical_address g_primaryAddress;
inline void PrintToStdOut(const char *strFormat, ...)
{
int CecKeyPress(void *UNUSED(cbParam), const cec_keypress &key)
{
- CLockObject lock(g_keyMutex);
g_lastKey = key.keycode;
- g_keyCondtion.Signal();
+ g_keyEvent.Signal();
return 0;
}
int CecCommand(void *UNUSED(cbParam), const cec_command &command)
{
- CLockObject lock(g_responseMutex);
g_lastCommand = command.opcode;
- g_responseCondtion.Signal();
+ g_responseEvent.Signal();
return 0;
}
-void EnableCallbacks(ICECAdapter *adapter)
-{
- g_callbacks.CBCecLogMessage = &CecLogMessage;
- g_callbacks.CBCecKeyPress = &CecKeyPress;
- g_callbacks.CBCecCommand = &CecCommand;
- adapter->EnableCallbacks(NULL, &g_callbacks);
-}
-
-ICECAdapter *CreateParser(cec_device_type_list typeList)
-{
- ICECAdapter *parser = LibCecInit("ButtonConfig", typeList);
- if (!parser)
- {
- #ifdef __WINDOWS__
- PrintToStdOut("Cannot load libcec.dll");
- #else
- PrintToStdOut("Cannot load libcec.so");
- #endif
- return NULL;
- }
-
- PrintToStdOut("CEC Parser created - libcec version %d.%d", parser->GetLibVersionMajor(), parser->GetLibVersionMinor());
-
- return parser;
-}
-
bool ProcessConsoleCommand(string &input)
{
if (!input.empty())
g_config.Clear();
snprintf(g_config.strDeviceName, 13, "CEC-config");
g_config.callbackParam = NULL;
- g_config.clientVersion = CEC_CLIENT_VERSION_1_5_0;
+ g_config.clientVersion = (uint32_t)CEC_CLIENT_VERSION_1_6_2;
g_callbacks.CBCecLogMessage = &CecLogMessage;
g_callbacks.CBCecKeyPress = &CecKeyPress;
g_callbacks.CBCecCommand = &CecCommand;
return false;
}
- cec_logical_addresses addr = g_parser->GetLogicalAddresses();
- g_primaryAddress = addr.primary;
+ g_parser->GetCurrentConfiguration(&g_config);
+ PrintToStdOut("CEC Parser created - libCEC version %s", g_parser->ToString((cec_server_version)g_config.serverVersion));
- PrintToStdOut("cec device opened. using logical address %X", g_primaryAddress);
return true;
}
int8_t FindPhysicalAddressPortNumber(void)
{
- PrintToStdOut("Enter the HDMI port number to which you connected your CEC adapter, followed by <enter>. Only port 1, 2, 3 or 4 are supported. Anything else will cancel this wizard.");
+ PrintToStdOut("Enter the HDMI port number to which you connected your CEC adapter, followed by <enter>. Valid ports are in the range 1-15. Anything else will cancel this wizard.");
string input;
getline(cin, input);
cin.clear();
- if (input.empty() || (input != "1" && input != "2" && input != "3" && input != "4"))
+ if (input.empty())
return -1;
- return (int8_t)atoi(input.c_str());
+
+ int hdmiport = atoi(input.c_str());
+ return (hdmiport < 1 || hdmiport > 15) ? -1 : (int8_t)hdmiport;
}
cec_logical_address FindPhysicalAddressBaseDevice(void)
{
- PrintToStdOut("Press 1 of your CEC adapter is connected to your TV or\npress 2 if it's connected to an AVR, followed by <enter>. Anything else will cancel this wizard.");
+ PrintToStdOut("Press 1 if your CEC adapter is connected to your TV or\nPress 2 if it's connected to an AVR, followed by <enter>. Anything else will cancel this wizard.");
string input;
getline(cin, input);
uint16_t FindPhysicalAddress(void)
{
PrintToStdOut("=== Physical Address Configuration ===\n");
- uint16_t iAddress(0xFFFF);
+ uint16_t iAddress(CEC_INVALID_PHYSICAL_ADDRESS);
PrintToStdOut("Do you want to let libCEC try to autodetect the address (y/n)?");
string input;
PrintToStdOut("Failed. Please enter the address manually, or restart this wizard and use different settings.");
else
{
- iAddress = g_parser->GetDevicePhysicalAddress(g_primaryAddress);
- if (iAddress == 0 || iAddress == 0xFFFF)
+ g_parser->GetCurrentConfiguration(&g_config);
+ iAddress = g_parser->GetDevicePhysicalAddress(g_config.logicalAddresses.primary);
+ if (iAddress == 0 || iAddress == CEC_INVALID_PHYSICAL_ADDRESS)
PrintToStdOut("Failed. Please enter the address manually, or restart this wizard and use different settings.");
}
}
- if (iAddress == 0 || iAddress == 0xFFFF)
+ if (iAddress == 0 || iAddress == CEC_INVALID_PHYSICAL_ADDRESS)
{
- PrintToStdOut("Please enter the physical address (0000 - FFFF), followed by <enter>.");
+ PrintToStdOut("Please enter the physical address (0001 - FFFE), followed by <enter>.");
getline(cin, input);
cin.clear();
int iAddressTmp;
if (sscanf(input.c_str(), "%x", &iAddressTmp) == 1)
{
- if (iAddressTmp < 0 || iAddressTmp > 0xFFFF)
- iAddressTmp = 0xFFFF;
+ if (iAddressTmp <= CEC_PHYSICAL_ADDRESS_TV || iAddressTmp > CEC_MAX_PHYSICAL_ADDRESS)
+ iAddressTmp = CEC_INVALID_PHYSICAL_ADDRESS;
iAddress = (uint16_t)iAddressTmp;
}
}
+ if (iAddress != 0)
+ {
+ g_parser->SetPhysicalAddress(iAddress);
+ g_parser->SetActiveSource(g_config.deviceTypes[0]);
+ }
+
return iAddress;
}
g_parser->PowerOnDevices(CECDEVICE_TV);
while (iTarget > iNow)
{
- CLockObject lock(g_responseMutex);
- g_responseCondtion.Wait(g_responseMutex, (uint32_t)(iTarget - iNow));
+ g_responseEvent.Wait((uint32_t)(iTarget - iNow));
if (g_lastCommand == CEC_OPCODE_REQUEST_ACTIVE_SOURCE)
break;
iNow = GetTimeMs();
return currentTvPower == CEC_POWER_STATUS_ON;
}
-int main (int argc, char *argv[])
+int main (int UNUSED(argc), char *UNUSED(argv[]))
{
PrintToStdOut("=== USB-CEC Adapter Configuration ===\n");
if (!OpenConnection())
}
{
- PrintToStdOut("Do you want to power on CEC devices when starting the application (y/n)?");
+ PrintToStdOut("Do you want to make the CEC adapter the active source when starting the application (y/n)?");
string input;
getline(cin, input);
cin.clear();
- g_config.bPowerOnStartup = (input == "y" || input == "Y") ? 1 : 0;
+ g_config.bActivateSource = (input == "y" || input == "Y") ? 1 : 0;
+ }
+
+ {
+ PrintToStdOut("Do you want to power on the TV when starting the application (y/n)?");
+ string input;
+ getline(cin, input);
+ cin.clear();
+ if (input == "y" || input == "Y")
+ g_config.wakeDevices.Set(CECDEVICE_TV);
}
{
string input;
getline(cin, input);
cin.clear();
- g_config.bPowerOffShutdown = (input == "y" || input == "Y") ? 1 : 0;
+ if (input == "y" || input == "Y")
+ g_config.powerOffDevices.Set(CECDEVICE_TV);
}
{
string input;
getline(cin, input);
cin.clear();
- g_config.bPowerOffOnStandby = (input == "y" || input == "Y");
+ g_config.bPowerOffOnStandby = (input == "y" || input == "Y") ? 1 : 0;
+ }
+
+ {
+ PrintToStdOut("Do you want to send an inactive source message when stopping the application (y/n)?");
+ string input;
+ getline(cin, input);
+ cin.clear();
+ g_config.bSendInactiveSource = (input == "y" || input == "Y") ? 1 : 0;
}
PrintToStdOut("\n\n=== USB-CEC Adapter Configuration Summary ===");
PrintToStdOut("Connected to HDMI device: %X", (uint8_t)g_config.baseDevice);
PrintToStdOut("Physical address: %4X", g_config.iPhysicalAddress);
PrintToStdOut("Use the TV's language setting: %s", g_config.bUseTVMenuLanguage ? "yes" : "no");
- PrintToStdOut("Power on the TV when starting XBMC: %s", g_config.bPowerOnStartup ? "yes" : "no");
- PrintToStdOut("Power off devices when stopping XBMC: %s", g_config.bPowerOffShutdown ? "yes" : "no");
+ PrintToStdOut("Make the adapter the active source when starting XBMC: %s", g_config.bActivateSource ? "yes" : "no");
+ PrintToStdOut("Power on the TV when starting XBMC: %s", g_config.wakeDevices.IsSet(CECDEVICE_BROADCAST) ? "yes" : "no");
+ PrintToStdOut("Power off devices when stopping XBMC: %s", g_config.powerOffDevices.IsSet(CECDEVICE_BROADCAST) ? "yes" : "no");
PrintToStdOut("Put devices in standby mode when activating screensaver: %s", g_config.bPowerOffScreensaver ? "yes" : "no");
- PrintToStdOut("Put this PC in standby mode when the TV is switched off: %s\n\n", g_config.bPowerOffOnStandby ? "yes" : "no");
+ PrintToStdOut("Put this PC in standby mode when the TV is switched off: %s", g_config.bPowerOffOnStandby ? "yes" : "no");
+ PrintToStdOut("Send an inactive source message when stopping XBMC: %s\n\n", g_config.bSendInactiveSource ? "yes" : "no");
- if (g_parser->CanPersistConfiguration())
- {
- PrintToStdOut("Do you want to store these settings in the adapter (y/n)?");
- string input;
- getline(cin, input);
- cin.clear();
- if (input == "y" || input == "Y")
- {
- PrintToStdOut("Storing settings ...");
- if (g_parser->PersistConfiguration(&g_config))
- PrintToStdOut("Settings stored.");
- else
- PrintToStdOut("The settings could not be stored");
- }
- }
+ PrintToStdOut("Storing settings ...");
+ if (g_parser->PersistConfiguration(&g_config))
+ PrintToStdOut("Settings stored.");
else
+ PrintToStdOut("The settings could not be stored");
+
+ ofstream configOutput;
+ configOutput.open("usb_2548_1001.xml");
+ if (configOutput.is_open())
{
- PrintToStdOut("This adapter doesn't support settings persistence. Please set up these settings in your media player application.");
+ CStdString strWakeDevices;
+ for (uint8_t iPtr = 0; iPtr < 16; iPtr++)
+ if (g_config.wakeDevices[iPtr])
+ strWakeDevices.AppendFormat(" %d" + iPtr);
+ CStdString strStandbyDevices;
+ for (uint8_t iPtr = 0; iPtr < 16; iPtr++)
+ if (g_config.powerOffDevices[iPtr])
+ strStandbyDevices.AppendFormat(" %d" + iPtr);
+
+ configOutput <<
+ "<settings>\n" <<
+ "\t<setting id=\"enabled\" value=\"1\" />\n" <<
+ "\t<setting id=\"activate_source\" value=\"" << (int)g_config.bActivateSource << "\" />\n" <<
+ "\t<setting id=\"wake_devices\" value=\"" << strWakeDevices.c_str() << "\" />\n" <<
+ "\t<setting id=\"standby_devices\" value=\"" << strStandbyDevices.c_str() << "\" />\n" <<
+ "\t<setting id=\"cec_standby_screensaver\" value=\"" << (int)g_config.bPowerOffScreensaver << "\" />\n" <<
+ "\t<setting id=\"standby_pc_on_tv_standby\" value=\"" << (int)g_config.bPowerOffOnStandby << "\" />\n" <<
+ "\t<setting id=\"use_tv_menu_language\" value=\"" << (int)g_config.bUseTVMenuLanguage << "\" />\n" <<
+ "\t<setting id=\"physical_address\" value=\"" << hex << g_config.iPhysicalAddress << "\" />\n" <<
+ "\t<setting id=\"cec_hdmi_port\" value=\"" << g_config.iHDMIPort << "\" />\n" <<
+ "\t<setting id=\"connected_device\" value=\"" << (int)g_config.baseDevice << "\" />\n" <<
+ "\t<setting id=\"port\" value=\"\" />\n" <<
+ "\t<setting id=\"send_inactive_source\" value=\"" << (int)g_config.bSendInactiveSource << "\" />\n" <<
+ "</settings>";
+ configOutput.close();
+
+ PrintToStdOut("The configuration has been stored in 'usb_2548_1001.xml'. Copy this file to ~/.userdata/peripheral_data to use it in XBMC");
}
g_parser->StandbyDevices();