return true;
}
-void flush_log(ICECAdapter *cecParser)
+void FlushLog(ICECAdapter *cecParser)
{
cec_log_message message;
while (cecParser && cecParser->GetNextLogMessage(&message))
}
}
-void list_devices(ICECAdapter *parser)
+void ListDevices(ICECAdapter *parser)
{
cec_adapter *devices = new cec_adapter[10];
uint8_t iDevicesFound = parser->FindAdapters(devices, 10, NULL);
}
}
-void show_help(const char* strExec)
+void ShowHelpCommandLine(const char* strExec)
{
cout << endl <<
strExec << " {-h|--help|-l|--list-devices|[COM PORT]}" << endl <<
" -h --help Shows this help text" << endl <<
" -l --list-devices List all devices on this system" << endl <<
" -t --type {p|r|t|a} The device type to use. More than one is possible." << endl <<
+ " -p --port {int} The HDMI port to use as active source." << endl <<
" -f --log-file {file} Writes all libCEC log message to a file" << endl <<
" -sf --short-log-file {file} Writes all libCEC log message without timestamps" << endl <<
" and log levels to a file." << endl <<
" -d --log-level {level} Sets the log level. See cectypes.h for values." << endl <<
+ " -s --single-command Execute a single command and exit. Does not power" << endl <<
+ " on devices on startup and power them off on exit." << endl <<
" [COM PORT] The com port to connect to. If no COM" << endl <<
" port is given, the client tries to connect to the" << endl <<
" first device that is detected." << endl <<
"available commands" << endl;
}
-ICECAdapter *create_parser(cec_device_type_list typeList)
+ICECAdapter *CreateParser(cec_device_type_list typeList)
{
ICECAdapter *parser = LibCecInit("CECTester", typeList);
if (!parser || parser->GetMinLibVersion() > CEC_TEST_CLIENT_VERSION)
return parser;
}
-void show_console_help(void)
+void ShowHelpConsole(void)
{
cout << endl <<
"================================================================================" << endl <<
"Available commands:" << endl <<
endl <<
- "tx {bytes} transfer bytes over the CEC line." << endl <<
- "txn {bytes} transfer bytes but don't wait for transmission ACK." << endl <<
- "[tx 40 00 FF 11 22 33] sends bytes 0x40 0x00 0xFF 0x11 0x22 0x33" << endl <<
- endl <<
- "on {address} power on the device with the given logical address." << endl <<
- "[on 5] power on a connected audio system" << endl <<
- endl <<
- "standby {address} put the device with the given address in standby mode." << endl <<
- "[standby 0] powers off the TV" << endl <<
- endl <<
- "la {logical_address} change the logical address of the CEC adapter." << endl <<
- "[la 4] logical address 4" << endl <<
- endl <<
- "pa {physical_address} change the physical address of the CEC adapter." << endl <<
- "[pa 10 00] physical address 1.0.0.0" << endl <<
- endl <<
- "osd {addr} {string} set OSD message on the specified device." << endl <<
- "[osd 0 Test Message] displays 'Test Message' on the TV" << endl <<
- endl <<
- "ver {addr} get the CEC version of the specified device." << endl <<
- "[ver 0] get the CEC version of the TV" << endl <<
- endl <<
- "ven {addr} get the vendor ID of the specified device." << endl <<
- "[ven 0] get the vendor ID of the TV" << endl <<
- endl <<
- "lang {addr} get the menu language of the specified device." << endl <<
- "[lang 0] get the menu language of the TV" << endl <<
- endl <<
- "pow {addr} get the power status of the specified device." << endl <<
- "[pow 0] get the power status of the TV" << endl <<
- endl <<
- "poll {addr} poll the specified device." << endl <<
- "[poll 0] sends a poll message to the TV" << endl <<
- endl <<
+ "[tx] {bytes} transfer bytes over the CEC line." << endl <<
+ "[txn] {bytes} transfer bytes but don't wait for transmission ACK." << endl <<
+ "[on] {address} power on the device with the given logical address." << endl <<
+ "[standby] {address} put the device with the given address in standby mode." << endl <<
+ "[la] {logical address} change the logical address of the CEC adapter." << endl <<
+ "[p] {port number} change the HDMI port number of the CEC adapter." << endl <<
+ "[pa] {physical address} change the physical address of the CEC adapter." << endl <<
+ "[osd] {addr} {string} set OSD message on the specified device." << endl <<
+ "[ver] {addr} get the CEC version of the specified device." << endl <<
+ "[ven] {addr} get the vendor ID of the specified device." << endl <<
+ "[lang] {addr} get the menu language of the specified device." << endl <<
+ "[pow] {addr} get the power status of the specified device." << endl <<
+ "[name] {addr} get the OSD name of the specified device." << endl <<
+ "[poll] {addr} poll the specified device." << endl <<
+ "[lad] lists active devices on the bus" << endl <<
+ "[ad] {addr} checks whether the specified device is active." << endl <<
+ "[at] {type} checks whether the specified device type is active." << endl <<
+ "[volup] send a volume up command to the amp if present" << endl <<
+ "[voldown] send a volume down command to the amp if present" << endl <<
+ "[mute] send a mute/unmute command to the amp if present" << endl <<
"[mon] {1|0} enable or disable CEC bus monitoring." << endl <<
"[log] {1 - 31} change the log level. see cectypes.h for values." << endl <<
"[ping] send a ping command to the CEC adapter." << endl <<
int main (int argc, char *argv[])
{
+ int8_t iHDMIPort(-1);
cec_device_type_list typeList;
typeList.clear();
int iArgPtr = 1;
+ bool bSingleCommand(false);
while (iArgPtr < argc)
{
if (argc >= iArgPtr + 1)
if (iNewLevel >= CEC_LOG_ERROR && iNewLevel <= CEC_LOG_ALL)
{
g_cecLogLevel = iNewLevel;
- cout << "log level set to " << argv[iArgPtr + 1] << endl;
+ if (!bSingleCommand)
+ cout << "log level set to " << argv[iArgPtr + 1] << endl;
}
else
{
{
if (!strcmp(argv[iArgPtr + 1], "p"))
{
- cout << "== using device type 'playback device'" << endl;
+ if (!bSingleCommand)
+ cout << "== using device type 'playback device'" << endl;
typeList.add(CEC_DEVICE_TYPE_PLAYBACK_DEVICE);
}
else if (!strcmp(argv[iArgPtr + 1], "r"))
{
- cout << "== using device type 'recording device'" << endl;
+ if (!bSingleCommand)
+ cout << "== using device type 'recording device'" << endl;
typeList.add(CEC_DEVICE_TYPE_RECORDING_DEVICE);
}
else if (!strcmp(argv[iArgPtr + 1], "t"))
{
- cout << "== using device type 'tuner'" << endl;
+ if (!bSingleCommand)
+ cout << "== using device type 'tuner'" << endl;
typeList.add(CEC_DEVICE_TYPE_TUNER);
}
else if (!strcmp(argv[iArgPtr + 1], "a"))
{
- cout << "== using device type 'audio system'" << endl;
+ if (!bSingleCommand)
+ cout << "== using device type 'audio system'" << endl;
typeList.add(CEC_DEVICE_TYPE_AUDIO_SYSTEM);
}
else
else if (!strcmp(argv[iArgPtr], "--list-devices") ||
!strcmp(argv[iArgPtr], "-l"))
{
- ICECAdapter *parser = create_parser(typeList);
+ ICECAdapter *parser = CreateParser(typeList);
if (parser)
{
- list_devices(parser);
+ ListDevices(parser);
UnloadLibCec(parser);
}
return 0;
}
+ else if (!strcmp(argv[iArgPtr], "--single-command") ||
+ !strcmp(argv[iArgPtr], "-s"))
+ {
+ bSingleCommand = true;
+ ++iArgPtr;
+ }
else if (!strcmp(argv[iArgPtr], "--help") ||
!strcmp(argv[iArgPtr], "-h"))
{
- show_help(argv[0]);
+ ShowHelpCommandLine(argv[0]);
return 0;
}
+ else if (!strcmp(argv[iArgPtr], "-p") ||
+ !strcmp(argv[iArgPtr], "--port"))
+ {
+ if (argc >= iArgPtr + 2)
+ {
+ iHDMIPort = (int8_t)atoi(argv[iArgPtr + 1]);
+ cout << "using HDMI port '" << iHDMIPort << "'" << endl;
+ ++iArgPtr;
+ }
+ ++iArgPtr;
+ }
else
{
g_strPort = argv[iArgPtr++];
}
}
- if (typeList.empty())
+ if (typeList.IsEmpty())
{
- cout << "No device type given. Using 'playback device'" << endl;
- typeList.add(CEC_DEVICE_TYPE_PLAYBACK_DEVICE);
+ if (!bSingleCommand)
+ cout << "No device type given. Using 'recording device'" << endl;
+ typeList.add(CEC_DEVICE_TYPE_RECORDING_DEVICE);
}
ICECAdapter *parser = LibCecInit("CECTester", typeList);
#endif
return 1;
}
- CStdString strLog;
- strLog.Format("CEC Parser created - libcec version %d.%d", parser->GetLibVersionMajor(), parser->GetLibVersionMinor());
- cout << strLog.c_str() << endl;
- //make stdin non-blocking
-#ifndef __WINDOWS__
- int flags = fcntl(0, F_GETFL, 0);
- flags |= O_NONBLOCK;
- fcntl(0, F_SETFL, flags);
-#endif
+ if (!bSingleCommand)
+ {
+ CStdString strLog;
+ strLog.Format("CEC Parser created - libcec version %d.%d", parser->GetLibVersionMajor(), parser->GetLibVersionMinor());
+ cout << strLog.c_str() << endl;
+
+ //make stdin non-blocking
+ #ifndef __WINDOWS__
+ int flags = fcntl(0, F_GETFL, 0);
+ flags |= O_NONBLOCK;
+ fcntl(0, F_SETFL, flags);
+ #endif
+ }
if (g_strPort.IsEmpty())
{
- cout << "no serial port given. trying autodetect: ";
+ if (!bSingleCommand)
+ cout << "no serial port given. trying autodetect: ";
cec_adapter devices[10];
uint8_t iDevicesFound = parser->FindAdapters(devices, 10, NULL);
if (iDevicesFound <= 0)
{
+ if (bSingleCommand)
+ cout << "autodetect ";
cout << "FAILED" << endl;
UnloadLibCec(parser);
return 1;
}
else
{
- cout << endl << " path: " << devices[0].path << endl <<
- " com port: " << devices[0].comm << endl << endl;
+ if (!bSingleCommand)
+ {
+ cout << endl << " path: " << devices[0].path << endl <<
+ " com port: " << devices[0].comm << endl << endl;
+ }
g_strPort = devices[0].comm;
}
}
+ if (iHDMIPort > 0)
+ {
+ parser->SetHDMIPort((uint8_t)iHDMIPort);
+ FlushLog(parser);
+ }
+
+ cout << "scanning the CEC bus..." << endl;
+
if (!parser->Open(g_strPort.c_str()))
{
cout << "unable to open the device on port " << g_strPort << endl;
- flush_log(parser);
+ FlushLog(parser);
UnloadLibCec(parser);
return 1;
}
- cout << "cec device opened" << endl;
+ if (!bSingleCommand)
+ {
+ cout << "cec device opened" << endl;
- parser->PowerOnDevices(CECDEVICE_TV);
- flush_log(parser);
+ parser->PowerOnDevices(CECDEVICE_TV);
+ FlushLog(parser);
- parser->SetActiveSource();
- flush_log(parser);
+ parser->SetActiveSource();
+ FlushLog(parser);
+
+ cout << "waiting for input" << endl;
+ }
bool bContinue(true);
- cout << "waiting for input" << endl;
while (bContinue)
{
- flush_log(parser);
+ if (bSingleCommand)
+ bContinue = false;
+
+ FlushLog(parser);
/* just ignore the command buffer and clear it */
cec_command dummy;
string strvalue;
uint8_t ivalue;
cec_command bytes;
- bytes.clear();
+ bytes.Clear();
while (GetWord(input, strvalue) && HexStrToInt(strvalue, ivalue))
- bytes.push_back(ivalue);
+ bytes.PushBack(ivalue);
if (command == "txn")
bytes.transmit_timeout = 0;
parser->SetLogicalAddress((cec_logical_address) atoi(strvalue.c_str()));
}
}
+ else if (command == "p")
+ {
+ string strvalue;
+ if (GetWord(input, strvalue))
+ {
+ parser->SetHDMIPort((uint8_t)atoi(strvalue.c_str()));
+ }
+ }
else if (command == "pa")
{
string strB1, strB2;
{
parser->PingAdapter();
}
+ else if (command == "volup")
+ {
+ CStdString strLog;
+ strLog.Format("volume up: %2X", parser->VolumeUp());
+ cout << strLog.c_str() << endl;
+ }
+ else if (command == "voldown")
+ {
+ CStdString strLog;
+ strLog.Format("volume up: %2X", parser->VolumeDown());
+ cout << strLog.c_str() << endl;
+ }
+ else if (command == "mute")
+ {
+ CStdString strLog;
+ strLog.Format("mute: %2X", parser->MuteAudio());
+ cout << strLog.c_str() << endl;
+ }
else if (command == "mon")
{
CStdString strEnable;
}
}
}
+ else if (command == "name")
+ {
+ CStdString strDev;
+ if (GetWord(input, strDev))
+ {
+ int iDev = atoi(strDev);
+ if (iDev >= 0 && iDev < 15)
+ {
+ cec_osd_name name = parser->GetOSDName((cec_logical_address)iDev);
+ cout << "OSD name of device " << iDev << " is '" << name.name << "'" << endl;
+ }
+ }
+ }
+ else if (command == "lad")
+ {
+ cout << "listing active devices:" << endl;
+ cec_logical_addresses addresses = parser->GetActiveDevices();
+ for (uint8_t iPtr = 0; iPtr < 16; iPtr++)
+ if (addresses[iPtr])
+ cout << "logical address " << iPtr << endl;
+ }
+ else if (command == "ad")
+ {
+ CStdString strDev;
+ if (GetWord(input, strDev))
+ {
+ int iDev = atoi(strDev);
+ if (iDev >= 0 && iDev < 15)
+ cout << "logical address " << iDev << " is " << (parser->IsActiveDevice((cec_logical_address)iDev) ? "active" : "not active") << endl;
+ }
+ }
+ else if (command == "at")
+ {
+ CStdString strType;
+ if (GetWord(input, strType))
+ {
+ cec_device_type type = CEC_DEVICE_TYPE_TV;
+ if (strType.Equals("a"))
+ type = CEC_DEVICE_TYPE_AUDIO_SYSTEM;
+ else if (strType.Equals("p"))
+ type = CEC_DEVICE_TYPE_PLAYBACK_DEVICE;
+ else if (strType.Equals("r"))
+ type = CEC_DEVICE_TYPE_RECORDING_DEVICE;
+ else if (strType.Equals("t"))
+ type = CEC_DEVICE_TYPE_TUNER;
+ cout << "device " << type << " is " << (parser->IsActiveDeviceType(type) ? "active" : "not active") << endl;
+ }
+ }
else if (command == "r")
{
cout << "closing the connection" << endl;
parser->Close();
- flush_log(parser);
+ FlushLog(parser);
cout << "opening a new connection" << endl;
parser->Open(g_strPort.c_str());
- flush_log(parser);
+ FlushLog(parser);
cout << "setting active source" << endl;
parser->SetActiveSource();
}
else if (command == "h" || command == "help")
{
- show_console_help();
+ ShowHelpConsole();
}
else if (command == "q" || command == "quit")
{
if (bContinue)
cout << "waiting for input" << endl;
}
- CCondition::Sleep(50);
+
+ if (bContinue)
+ CCondition::Sleep(50);
}
- parser->StandbyDevices(CECDEVICE_BROADCAST);
+ if (!bSingleCommand)
+ parser->StandbyDevices(CECDEVICE_BROADCAST);
+
parser->Close();
- flush_log(parser);
+ FlushLog(parser);
UnloadLibCec(parser);
if (g_logOutput.is_open())