X-Git-Url: https://git.piment-noir.org/?a=blobdiff_plain;f=ChangeLog;h=49b0e7eebe6e1d8b4232d81fc26c3d67d77b1509;hb=24048d575419fe909fade9110fab48d17370ee6f;hp=5d2c3dd5912fcb46133e26eaacfd4474f72cc02f;hpb=dfb08039104f9477f7a974977ec31ce30a4fa92c;p=deb_libcec.git diff --git a/ChangeLog b/ChangeLog index 5d2c3dd..49b0e7e 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,5 +1,126 @@ +libcec (1.4-3) unstable; urgency=low + + * fixed: + * try to ping the device and grab the firmware version until the connect + timeout runs out. fixes failed reconnect after standby, when the adapter + is still being initialised + + -- Pulse-Eight Packaging Thu, 27 Jan 2012 13:05:00 +0100 + +libcec (1.4-2) unstable; urgency=low + + * changed/added: + * added a firmware flash script for linux. + usage: ./support/cec-flash-device.sh /path/to/firware.hex + * refactored threading/locking - added windows native instead of + pthread-win32, so we can compile native x64 too + * check whether the adapter responds when connecting to it and report the + firmware version of the adapter after connecting + * moved create-installer.cmd to support/ + * completely removed AM_SILENT_RULES + * interface changes: + * compile LibCecSharp against .NET framework 2.0 and sign the assembly + * fixed: + * only the key release events were sent, not keypresses, which appeared in + clients as laggy keypresses + * fixed reconnect after standby + * wait for active tranmission to finish when opening a connection to the + adapter. fixes initialisation errors + * set the default transmit timeout properly instead of using 0 + * fixed possible deadlock because of a negative timeout in + CAdapterCommunication::WaitForTransmitSucceeded() + * fixed error message in cec-client (unable to open the device on port ...) + * exit cec-client after entering bootloader mode + * MSGCODE_START_BOOTLOADER doesn't respond with MSGCODE_COMMAND_ACCEPTED + + -- Pulse-Eight Packaging Thu, 25 Jan 2012 23:28:00 +0100 + libcec (1.4-1) unstable; urgency=low + * changed/added: + * added the vendor id for Sony + * always refresh the power state of a device when it hasn't been updated + for 30 seconds + * do silent builds by default + * interface changes: + * added optional callback methods to libCEC. enable them by calling + EnableCallbacks(ICECCallbacks *callbacks) / + cec_enable_callbacks(ICECCallbacks *callbacks). after this method is + called, the GetNext...() methods will not return any data + * added the same callbacks to LibCecSharp. implement CecCallbackMethods + and override the methods in there + * fixed: + * use the given timeout when trying to open a connection to the CEC + adapter + * resolved difference between method name in LibCECC.cpp and cecc.h. + credits: Doug Johnson + * don't transmit physical addresses while holding a lock in CCECProcessor + * don't hold a lock when sending an active source message. + * unload libCEC when the lib version is invalid + * "unused" warnings suppressed + + -- Pulse-Eight Packaging Thu, 12 Jan 2012 19:06:00 +0100 + +libcec (1.3-3) unstable; urgency=low + + * changed/added: + * place in libudev include in an extern C block. fixes compilations on + older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann + * added pkg-config to the dependencies list. issue #15 + * updated README. closes #14 + * added a script that tests some basic functions of the CEC adapter: + /support/cec-test-device.sh + * fixed: + * don't make libCEC the active source when changing the physical address. + don't send active source messages on startup, when not the active source + fixes unwanted device power ups + * replace the command handler directly after receiving a changed vendor + id. change the primary type from recording device to playback device + for panasonic TVs + * don't send a deck status update when sending an active source message + for panasonic TVs + * only switch handlers once when using the generic handler + * don't switch handlers when not needed + * hold a lock in CCECProcessor::SetHDMIPort() + * don't send deck status updates when sending an active source message by + default + + -- Pulse-Eight Packaging Thu, 3 Jan 2012 22:48:00 +0100 + +libcec (1.3-2) unstable; urgency=low + + * changed/added: + * copy libcec.dll to the XBMC installation dir when XBMC is found + * disable background polling. let the client request this info when needed + * update the power status of a device when it's set to + CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON + * wait for the correct response when requesting something, not just any + response + * don't keep trying the same command/request after receiving a feature + abort message + * interface changes: + * change the previously unused boolean parameter in volume control methods + to bSendRelease, and only send a key release when it's true. default to + true + * fixed: + * don't send the power up/down keypress to listeners when in the initial + device state (powered off). fixes unexpected shutdown in XBMC when + connecting to the CEC adapter. + * send a 'menu state activated' command when starting up. bugzid: 113 + * don't wait for a response when not needed + * don't hold a lock while waiting for a response. fixes failed libCEC + inits and slow responses + * don't replace a command handler when it's being used. fixes possible + crash on startup + * don't try to do anything before the processor thread has started + * don't transmit active source messages when the physical address is + still 0xFFFF + * don't init the default handler before the physical address is known + + -- Pulse-Eight Packaging Thu, 29 Dec 2011 03:05:00 +0100 + +libcec (1.3-1) unstable; urgency=low + * changed/added: * make libudev optional. if libudev is not available on linux, adapter autodetection will also not be available. fixes compilation on Hardy/ATV1 @@ -19,8 +140,8 @@ libcec (1.4-1) unstable; urgency=low result and any error/warning, execute it with RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch files are a bit different) - * added physical address option to cec-client. credits @joshua-nord. - closes #3 + * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to + cec-client's parameters * handle image view on and text view on * handle routing information and report physical address opcodes * handle audio status updates @@ -77,8 +198,10 @@ libcec (1.4-1) unstable; urgency=low * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5 * renamed enum methods. fixes potential macro collision with isset(). thanks davilla + * don't change the active device when receiving stream path changed + messages. fixes wrong source selection when powering after the TV. - -- Pulse-Eight Packaging Sat, 12 Nov 2011 13:36:00 +0100 + -- Pulse-Eight Packaging Fri, 09 Dec 2011 12:16:00 +0100 libcec (1.2-1) unstable; urgency=low