X-Git-Url: https://git.piment-noir.org/?a=blobdiff_plain;f=ChangeLog;h=5c43fc20b5dd1b370c7b40a907e21901832f9a4b;hb=3b106c7d018681dec102db878a9ca4cbd213c1e2;hp=2ec5e1bc0569ef24b9ceefa567c0501561e35bfb;hpb=347f7adb71ac80290639a3764b598c94b828f3f4;p=deb_libcec.git

diff --git a/ChangeLog b/ChangeLog
index 2ec5e1b..5c43fc2 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,59 @@
+libcec (1.8.2-1) unstable; urgency=low
+
+  * changed/added:
+    * p8: match to the response provided by the firmware when checking
+      responses (added in firmware v2 rev6)
+
+  * fixed:
+    * windows: update the error message when an error occurs while writing to
+      the serial port
+    * delayed source switch time was reset, resulting in an attempt every
+      second until it succeeded
+    * ensure that the vendor commands are always sent for panasonic, and that
+      the deck status for lg isn't reset. fixes some buttons not working after
+      a second or delayed source switch
+    * added guard so ReplaceHandler() doesn't accidently try to replace a
+      handler for the broadcast address
+    * wait until the commandhandler is replaced before registering a client,
+      so we don't register a client and replace it directly afterwards if the
+      tv doesn't support the device type
+    * ensure that the command handler of the tv is replaced before registering
+      a client, or it might result in a double eeprom write attempt
+    * p8: don't disable controlled mode when switching to monitoring mode
+    * p8: do delayed eeprom writes async or it'll block processing other input
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 3 Aug 2012 02:35:00 +0100
+
+libcec (1.8.1-1) unstable; urgency=low
+
+  * changed/added:
+    * added support for the Raspberry Pi.
+    * added cec-client -i / cec-client --info that calls GetLibInfo()
+    * header cleanups
+    * added CAdapterFactory, to create IAdapterCommunication instances
+    * added --debug to configure, to include -ggdb
+
+  * interface changes:
+    * added GetLibInfo()/cec_get_lib_info(), that shows how libCEC was compiled
+      and with which features included.
+    * added ToString(cec_user_control_code_key) to the interface
+
+  * fixed:
+    * disallow sending CEC_OPCODE_SET_STREAM_PATH - not allowed by the CEC spec
+    * persist the configuration in the eeprom after initialising the client.
+      fixes wrong/old settings being used in autonomous mode, which broke the
+      wake on cec funtion
+    * persist the new configuration when the hdmi port setting changed
+    * cleaned locks around callbacks
+    * always set controlled mode to false when unregistering the last client.
+      fixes 30 second timeout before controlled mode gets deactivated
+    * updated the cached device type setting properly when persisting new
+      settings. correct return value from WriteEEPROM(). lock a mutex when
+      updating the state
+    * LibCecSharp: set the primary LA in CecLogicalAddresses
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 25 Jul 2012 13:05:00 +0100
+
 libcec (1.7.2-1) unstable; urgency=low
 
   * changed/added:
@@ -5,12 +61,18 @@ libcec (1.7.2-1) unstable; urgency=low
       detection for the target platform
     * panasonic: added a vendor command for panasonic that will enable routing
       of some more buttons on the remote (guide, text, ...)
+    * standby command won't be forwarded more than once every 10 seconds
+    * added vendor ids for Akai, AOC, Benq, Daewoo, Grundig, Medion, Sharp and
+      Vizio
     * cec-client: don't display debug output by default in 'cec-client -l'
 
   * interface changes:
+    * added a callback for clients that is called when a source is
+      (de)activated, so the client can respond to this action
     * added cec_command::PushArray()
 
   * fixed:
+    * command forwarding. fixes player not going into standby mode
     * missing virtual keyword in CCECCommandHandler::
       GetReplacementDeviceType()
     * replace the handler (if needed) in GetHandler()
@@ -31,11 +93,25 @@ libcec (1.7.2-1) unstable; urgency=low
       device lets us know it went into standby mode. fixes possibly failed
       active source switches after it succeeded once
     * panasonic: fixed delayed source switch for panasonic
+    * panasonic: mark the tv as powered up once it sends the audiomode request
+    * set the physical address of each device controlled by a CCECClient if
+      it's valid
+    * Windows could get stuck in a loop in case there an error occured while
+      reading registry entries
+    * ABI fixes (binary compat with v1.2 for Windows and v1.5.2 for others)
+    * replace the handler directly after getting the vendor id of a device when
+      registering a client
+    * copy the class member values of the old handler when creating a new
+      command handler, or a delayed activate source will get lost when the
+      handler is switched
     * cec-client: wrong client version
     * Makefile cleanups. don't link cec-client and cec-config against libudev
       and liblockdev
+    * pin libcec to the same version as libcec1
+    * LibCecSharp: update the local configuration after connecting
+    * LibCecSharp: better handling of callbacks
 
- -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 21 Jun 2012 16:01:00 +0100
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Wed, 27 Jun 2012 02:06:00 +0100
 
 libcec (1.7.1-1) unstable; urgency=low