X-Git-Url: https://git.piment-noir.org/?a=blobdiff_plain;f=debian%2Fchangelog;h=83e86264ffe3a49b63b77b570d6e037d81c17bb2;hb=2c7804018856ae3cbfc937b7c9b4cf9b00bc0e8d;hp=8b4cdf5a65c6b9648f38eff7d1fa848fc68bbafc;hpb=722869e27e6f6ef9db09fa9114994e167b7e8894;p=deb_libcec.git diff --git a/debian/changelog b/debian/changelog index 8b4cdf5..83e8626 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,283 @@ +libcec (1.4-1) unstable; urgency=low + + * changed/added: + * added the vendor id for Sony + * always refresh the power state of a device when it hasn't been updated + for 30 seconds + * do silent builds by default + * interface changes: + * added optional callback methods to libCEC. enable them by calling + EnableCallbacks(ICECCallbacks *callbacks) / + cec_enable_callbacks(ICECCallbacks *callbacks). after this method is + called, the GetNext...() methods will not return any data + * added the same callbacks to LibCecSharp. implement CecCallbackMethods + and override the methods in there + * fixed: + * use the given timeout when trying to open a connection to the CEC + adapter + * resolved difference between method name in LibCECC.cpp and cecc.h. + credits: Doug Johnson + * don't transmit physical addresses while holding a lock in CCECProcessor + * don't hold a lock when sending an active source message. + * unload libCEC when the lib version is invalid + * "unused" warnings suppressed + + -- Pulse-Eight Packaging Thu, 12 Jan 2012 19:06:00 +0100 + +libcec (1.3-3) unstable; urgency=low + + * changed/added: + * place in libudev include in an extern C block. fixes compilations on + older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann + * added pkg-config to the dependencies list. issue #15 + * updated README. closes #14 + * added a script that tests some basic functions of the CEC adapter: + /support/cec-test-device.sh + * fixed: + * don't make libCEC the active source when changing the physical address. + don't send active source messages on startup, when not the active source + fixes unwanted device power ups + * replace the command handler directly after receiving a changed vendor + id. change the primary type from recording device to playback device + for panasonic TVs + * don't send a deck status update when sending an active source message + for panasonic TVs + * only switch handlers once when using the generic handler + * don't switch handlers when not needed + * hold a lock in CCECProcessor::SetHDMIPort() + * don't send deck status updates when sending an active source message by + default + + -- Pulse-Eight Packaging Thu, 3 Jan 2012 22:48:00 +0100 + +libcec (1.3-2) unstable; urgency=low + + * changed/added: + * copy libcec.dll to the XBMC installation dir when XBMC is found + * disable background polling. let the client request this info when needed + * update the power status of a device when it's set to + CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON + * wait for the correct response when requesting something, not just any + response + * don't keep trying the same command/request after receiving a feature + abort message + * interface changes: + * change the previously unused boolean parameter in volume control methods + to bSendRelease, and only send a key release when it's true. default to + true + * fixed: + * don't send the power up/down keypress to listeners when in the initial + device state (powered off). fixes unexpected shutdown in XBMC when + connecting to the CEC adapter. + * send a 'menu state activated' command when starting up. bugzid: 113 + * don't wait for a response when not needed + * don't hold a lock while waiting for a response. fixes failed libCEC + inits and slow responses + * don't replace a command handler when it's being used. fixes possible + crash on startup + * don't try to do anything before the processor thread has started + * don't transmit active source messages when the physical address is + still 0xFFFF + * don't init the default handler before the physical address is known + + -- Pulse-Eight Packaging Thu, 29 Dec 2011 03:05:00 +0100 + +libcec (1.3-1) unstable; urgency=low + + * changed/added: + * make libudev optional. if libudev is not available on linux, adapter + autodetection will also not be available. fixes compilation on Hardy/ATV1 + * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET + language + * added vendor support for LG + * added vendor support for Philips + * added vendor support for Yamaha + * added vendor support for Onkyo + * added 'scan' command to cec-client, that displays info about devices on + the bus. made all ToString() methods available on the interface. + * added '-s' or '--single-command' to cec-client. starting cec-client with + this parameter executes a single command in cec-client and does not power + on devices on startup and power them off on exit. this way, you can use + cec-client in a shell script. since there's some handshaking involved at + startup, this is not very fast. to execute a command and only display the + result and any error/warning, execute it with + RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch + files are a bit different) + * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to + cec-client's parameters + * handle image view on and text view on + * handle routing information and report physical address opcodes + * handle audio status updates + * send ping and bootloader commands via the output queue + * scan the CEC bus for devices when starting libcec + * pass all commands that are directed at libcec to listeners + * interface changes: + * added GetActiveSource()/cec_get_active_source() + * added IsActiveSource()/cec_is_active_source() + * added GetDevicePhysicalAddress()/cec_get_device_physical_address() + * added GetDeviceOSDName()/cec_get_osd_name() + * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/ + cec_send_key_release() + * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(), + MuteAudio()/cec_mute_audio() + * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/ + cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type(). + * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load + and when a device with the same physical address is detected, libcec will + use the selected hdmi port on that device. should fix source selection on + other devices, like an amplifier + * added a hook in libcec for physical address autodetection + * fixed: + * don't request the physical address from the tv (it's always 0x0000) + * set the proper ackmask before doing anything else + * don't unlock the transmit mutex in CCECProcessor while waiting for an + answer + * fix device polling + * refactor CEC read/write. keep a single lock for all writes, not one per + device + * ignore other data while waiting for a response + * retry failed tranmissions + * don't delete a message before it's been sent when starting the bootloader + * or when sending a ping + * fixed possible segfault when switching the command handler after a vendor + * id changed + * handle audio opcodes correctly + * inactive source should be directly addressed at the TV + * don't report a changed physical address when it hasn't changed + * routing information sets the stream path, not the physical address + * don't scan the whole bus in CCECProcessor::IsActiveDeviceType() + * don't request the vendor id from devices that are handled by libcec + * mark device status as present when a command was received from a device + * always send a power on command in CCECBusDevice::PowerOn() + * don't request updates statusses unless needed + * report physical address sends 3 parameters, not 2. check whether the + device type is correct + * devices can send vendor commands from other vendors, so don't assume the + device is of a certain vendor when it sends commands with a vendor id + * thread safety fixes. bugzid: 19 + * clear any previous input when opening a connection to the adapter. + bugzid: 54 + * use the correct source address in CSLCommandHandler::HandleVendorCommand() + * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5 + * renamed enum methods. fixes potential macro collision with isset(). + thanks davilla + * don't change the active device when receiving stream path changed + messages. fixes wrong source selection when powering after the TV. + + -- Pulse-Eight Packaging Fri, 09 Dec 2011 12:16:00 +0100 + +libcec (1.2-1) unstable; urgency=low + + * bugfixes: + * pass the deck_control command to libcec listeners + * check whether the initiator is valid in CCECProcessor::ParseCommand(). + fixes possible segfault when parsing invalid data + + -- Pulse-Eight Packaging Sat, 12 Nov 2011 13:36:00 +0100 + +libcec (1.1-3) unstable; urgency=low + + * fixed return value in CCECProcessor::SetStreamPath(), which prevented + active source and menu state from being sent + + -- Pulse-Eight Packaging Fri, 11 Nov 2011 23:36:00 +0100 + +libcec (1.1-2) unstable; urgency=low + + * forgot to update the headers to v1.1 + + -- Pulse-Eight Packaging Fri, 11 Nov 2011 18:56:00 +0100 + +libcec (1.1-1) unstable; urgency=low + + * interface changes: + * added logical address autodetection and let libcec handle multiple types + simultaniously. for logical address autodetection, you have to use + CECInit()/cec_init_typed() instead of CECCreate()/cec_init() + * added SetActiveSource()/cec_set_active_source() to the interface. + deprecated SetActiveView()/cec_set_active_view() + * added SetMenuState() + * added PollDevice()/cec_poll_device() + * removed duplicate method SetActiveSource() / SetActiveView() + * added SetDeckControlMode() and SetDeckInfo() + * fixed: + * added vendor detection for panasonic and broadcast active view and set + menu state when a panasonic device sets the stream path. thanks for the + pointer cptcoconut. + * added vendor code for pioneer + * osd string is 13 chars max. don't send more + * send the correct cec version for each device + * switch to panasonic specific cec implementation if a panasonic device was + detected + * send the correct device type in TransmitPhysicalAddress() + * send a reply from the correct device when the stream path is requested + * opcode 0x80 means the stream path changed, not the physical address + * don't poll for a vendor ID in monitoring mode + * fixed parameter parsing in SetVendorId() + * buffer up commands that are received while waiting for an ack. only send + 'active source' message for the actual active source + * win32: prepend the com port path with '\\.\', so com ports > 9 can be + accessed. thanks smolesen + * audio systems cannot be an active source, so don't transmit active + source message from this device + * only send 'active source' when powered on + * only set the osd name for the primary device. use default values for + others + * increase physical address with 0x100 per device + * win32: removed unneeded afxres.h include in the resource files, which + is not present when using studio express. thanks Ghuron + * fixed C headers + * mark the active source as active and other devices as inactive + * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER + * transmit the menu state as (active) when the stream path is set + * changed: + * changed copyright of boblight files with permission of the original + author + * partial handling of audio related opcodes + * more consistent log messages + * set a device type and name for each CCECBusDevice + * keep a power and menu state per device + * renamed all Broadcast...() and Report...() methods to Transmit...() + * renamed SetOSDString() to TransmitOSDString() + * changed debug level of 'did not receive ack' from error to debug + * only set the power status to 'on' for the primary device + * moved method decriptions from cecc.h to cec.h + * only send a power on command when a device isn't on already and set + the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while + powering on + * handle CEC_OPCODE_STANDBY + * handle CEC_OPCODE_ACTIVE_SOURCE + * always start in standby mode and let the tv (or other device) send the + power on command + * renamed the last few enums + * handle deck related opcodes. + * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown' + + -- Pulse-Eight Packaging Fri, 11 Nov 2011 17:42:00 +0100 + +libcec (1.0-1) unstable; urgency=low + + * interface changes: + * set lib interface version back to 1.0 and rename GetLibVersion() to + GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion() + * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor + version number to 1 + * fixed: + * samsung's vendor specific remote keypresses don't send key releases. added + call to AddKey() directly after the keypress + * always reset the button press time in CLibCEC::AddKey() + * always wait for a signal in CCECProcessor::Transmit() + * changed: + * drop shared_ptr and use a normal pointer. removed boost dependency + + -- Pulse-Eight Packaging Fri, 04 Nov 2011 00:14:00 +0100 + +libcec (0.8-2) unstable; urgency=low + + * added 'libboost-dev' to build deps + + -- Pulse-Eight Packaging Tue, 01 Nov 2011 23:31:00 +0100 + libcec (0.8-1) unstable; urgency=low * interface changes: @@ -6,10 +286,10 @@ libcec (0.8-1) unstable; urgency=low * added GetDeviceMenuLanguage()/cec_get_device_menu_language() * added GetDeviceCecVersion()/cec_get_device_cec_version() * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when - monitoring is enabled, the device will only log the data it received, - but will not respond to any message + monitoring is enabled, the device will only log the data it received, + but will not respond to any message * removed timeout parameter in Transmit() and included the ack timeout in - the cec_command struct + the cec_command struct * made the vendor id -> vendor name translation available * made CEC_LOG levels powers of 2 * introduced CEC_LOG_TRAFFIC log level @@ -18,25 +298,25 @@ libcec (0.8-1) unstable; urgency=low * wait for ack while keeping a lock * wait for the processor thread to start before continueing on startup * wait for messages to be transmitted before continueing in - CCECProcessor::Transmit() + CCECProcessor::Transmit() * only set the logical address once when it has changed * correct source for broadcast messages * win32: create Release type installer * changed: * make all reads and write in CAdapterCommunication go through buffers. * poll for a vendor ID of connected devices and switch to a non-standard - CEC implementation if needed. + CEC implementation if needed. * added vendor detection of Samsung and LG devices * handle samsung remote command 'return' * cec-client: * added -la and --logical-address to the command line params * added -d and --log-level params to cec-client * added -sf and --short-log-file, which only log the actual messages, not - the level and timestamp + the level and timestamp * added -f and --log-file parameters to cec-client * added option to change the log level to cec-client --- Pulse-Eight Packaging Tue, 01 Nov 2011 22:58:00 +0200 + -- Pulse-Eight Packaging Tue, 01 Nov 2011 22:58:00 +0100 libcec (0.7-1) unstable; urgency=low