tabs -> spaces

diff --git a/ChangeLog b/ChangeLog
index 1bdf5a7430b67d760b5b435b96922d2f6e33a960..ab93e67103474a54af6068a0c39bfca0a31119a4 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -4,23 +4,23 @@ libcec (2.1.1-1) unstable; urgency=low
     * send an alert when the TV does not respond to polls
   * fixed:
     * LG didn't switch sources after the TV powered up
     * send an alert when the TV does not respond to polls
   * fixed:
     * LG didn't switch sources after the TV powered up

-       * always poll a device when the status is unknown, and don't try to
-         determine whether it needs to be polled by checking the status of other
-         devices
-       * don't mark a device as inactive when receiving a routing change message,
-         only when another device was made acive. fixes the issue that rc
-         passthrough doesn't work when a tv sends a quick routing change to
-         another port before requesting the active source when coming out of
-         standby
+    * always poll a device when the status is unknown, and don't try to
+      determine whether it needs to be polled by checking the status of other
+      devices
+    * don't mark a device as inactive when receiving a routing change message,
+      only when another device was made acive. fixes the issue that rc
+      passthrough doesn't work when a tv sends a quick routing change to
+      another port before requesting the active source when coming out of
+      standby

     * LibCecSharp: fixed 14 char long OSD name (wasn't \0 terminated)
     * LibCecSharp: fixed 14 char long OSD name (wasn't \0 terminated)

-       * LibCecSharp: fixed return value of GetActiveDevices(). issue #131
-       * cec-tray: fixed index out of range exception in CECSettingNumeric.cs.
-         bugzid: 2082
-       * cec-tray: ensure that the tray app only initialises once. bugzid: 2082
-       * rpi: don't set the physical address to 1.0.0.0 when receiving
-         VC_HDMI_UNPLUGGED. it may wake up device when they were just sent to
-         standby. issue #142
-       * osx: use the correct dylib name in cecloader.h, used by cec-client
+    * LibCecSharp: fixed return value of GetActiveDevices(). issue #131
+    * cec-tray: fixed index out of range exception in CECSettingNumeric.cs.
+      bugzid: 2082
+    * cec-tray: ensure that the tray app only initialises once. bugzid: 2082
+    * rpi: don't set the physical address to 1.0.0.0 when receiving
+      VC_HDMI_UNPLUGGED. it may wake up device when they were just sent to
+      standby. issue #142
+    * osx: use the correct dylib name in cecloader.h, used by cec-client

 
  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 8 Mar 2013 17:21:00 +0100
  
 
  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 8 Mar 2013 17:21:00 +0100
  

diff --git a/debian/changelog b/debian/changelog
index 1bdf5a7430b67d760b5b435b96922d2f6e33a960..ab93e67103474a54af6068a0c39bfca0a31119a4 100644 (file)
--- a/debian/changelog
+++ b/debian/changelog
@@ -4,23 +4,23 @@ libcec (2.1.1-1) unstable; urgency=low
     * send an alert when the TV does not respond to polls
   * fixed:
     * LG didn't switch sources after the TV powered up
     * send an alert when the TV does not respond to polls
   * fixed:
     * LG didn't switch sources after the TV powered up

-       * always poll a device when the status is unknown, and don't try to
-         determine whether it needs to be polled by checking the status of other
-         devices
-       * don't mark a device as inactive when receiving a routing change message,
-         only when another device was made acive. fixes the issue that rc
-         passthrough doesn't work when a tv sends a quick routing change to
-         another port before requesting the active source when coming out of
-         standby
+    * always poll a device when the status is unknown, and don't try to
+      determine whether it needs to be polled by checking the status of other
+      devices
+    * don't mark a device as inactive when receiving a routing change message,
+      only when another device was made acive. fixes the issue that rc
+      passthrough doesn't work when a tv sends a quick routing change to
+      another port before requesting the active source when coming out of
+      standby

     * LibCecSharp: fixed 14 char long OSD name (wasn't \0 terminated)
     * LibCecSharp: fixed 14 char long OSD name (wasn't \0 terminated)

-       * LibCecSharp: fixed return value of GetActiveDevices(). issue #131
-       * cec-tray: fixed index out of range exception in CECSettingNumeric.cs.
-         bugzid: 2082
-       * cec-tray: ensure that the tray app only initialises once. bugzid: 2082
-       * rpi: don't set the physical address to 1.0.0.0 when receiving
-         VC_HDMI_UNPLUGGED. it may wake up device when they were just sent to
-         standby. issue #142
-       * osx: use the correct dylib name in cecloader.h, used by cec-client
+    * LibCecSharp: fixed return value of GetActiveDevices(). issue #131
+    * cec-tray: fixed index out of range exception in CECSettingNumeric.cs.
+      bugzid: 2082
+    * cec-tray: ensure that the tray app only initialises once. bugzid: 2082
+    * rpi: don't set the physical address to 1.0.0.0 when receiving
+      VC_HDMI_UNPLUGGED. it may wake up device when they were just sent to
+      standby. issue #142
+    * osx: use the correct dylib name in cecloader.h, used by cec-client

 
  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 8 Mar 2013 17:21:00 +0100
  
 
  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 8 Mar 2013 17:21:00 +0100