+.TH X265 "1" "AUGUST 2014" "v1.4" "User Commands"
+.SH NAME
+x265 \- H.265/HEVC video encoder
+
+.SH SYNOPSIS
+.B x265 \fR[options] \fIinfile \fR[\-o] \fIoutfile
+.br
+Bit depth: 8
+.PP
+.B x265\-10bit \fR[options] \fIinfile \fR[\-o] \fIoutfile
+.br
+Bit depth: 10
+.PP
+infile can be YUV or Y4M
+.br
+outfile is raw HEVC bitstream
+
+.SH DESCRIPTION
+Increasing demand for high definition and ultra\-high definition video,
+along with an increasing desire for video on demand has led to
+exponential growth in demand for bandwidth and storage requirements.
+These challenges can be met by the new High Efficiency Video Coding
+(HEVC) standard, also known as H.265. The x265 HEVC encoder project was
+launched by MulticoreWare in 2013, aiming to provide the most efficient,
+highest performance HEVC video encoder.
+.SS About HEVC
+The High Efficiency Video Coding (HEVC) was developed by the ISO/IEC
+Moving Picture Experts Group (MPEG) and ITU\-T Video Coding Experts Group
+(VCEG), through their Joint Collaborative Team on Video Coding (JCT\-VC).
+HEVC is also known as ISO/IEC 23008\-2 MPEG\-H Part 2 and ITU\-T H.265.
+HEVC provides superior video quality and up to twice the data
+compression as the previous standard (H.264/MPEG\-4 AVC). HEVC can
+support 8K Ultra High Definition video, with a picture size up to
+8192x4320 pixels.
+.SS About x265
+The primary objective of x265 is to become the best H.265/HEVC encoder
+available anywhere, offering the highest compression efficiency and the
+highest performance on a wide variety of hardware platforms. The x265
+encoder is available as an open source library, published under the
+GPLv2 license. It is also available under a commercial license, enabling
+commercial companies to utilize and distribute x265 in their solutions
+without being subject to the restrictions of the GPL license.
+
+.SH OPTIONS
+.TP
+\fB\-h/\-\-help
+Show this help text and exit
+.TP
+\fB\-V/\-\-version
+Show version info and exit
+
+.SS "Output Options:"
+.TP
+\fB\-\-output <filename>
+Bitstream output file name
+.TP
+\fB\-\-log\-level <string>
+Logging level: none error warning info debug full. Default info
+.TP
+\fB\-\-no\-progress
+Disable CLI progress reports
+.TP
+\fB\-\-[no\-]cu\-stats
+Enable logging stats about distribution of cu across all modes. Default disabled
+.TP
+\fB\-\-csv <filename>
+Comma separated log file, log level >= 3 frame log, else one line per run
+
+.SS "Input Options:"
+.TP
+\fB\-\-input <filename>
+Raw YUV or Y4M input file name. `\-` for stdin
+.TP
+\fB\-\-y4m
+Force parsing of input stream as YUV4MPEG2 regardless of file extension
+.TP
+\fB\-\-fps <float|rational>
+Source frame rate (float or num/denom), auto\-detected if Y4M
+.TP
+\fB\-\-input\-res WxH
+Source picture size [w x h], auto\-detected if Y4M
+.TP
+\fB\-\-input\-depth <integer>
+Bit\-depth of input file. Default 8
+.TP
+\fB\-\-input\-csp <string>
+Source color space: i420, i444 or i422, auto\-detected if Y4M. Default: i420
+.TP
+\fB\-f/\-\-frames <integer>
+Maximum number of frames to encode. Default all
+.TP
+\fB\-\-seek <integer>
+First frame to encode
+.TP
+\fB\-\-[no\-]interlace <bff|tff>
+Indicate input pictures are interlace fields in temporal order. Default progressive
+.TP
+\fB\-\-dither
+Enable dither if downscaling to 8 bit pixels. Default disabled
+
+.SS "Quality reporting metrics:"
+.TP
+\fB\-\-[no\-]ssim
+Enable reporting SSIM metric scores. Default disabled
+.TP
+\fB\-\-[no\-]psnr
+Enable reporting PSNR metric scores. Default disabled
+
+.SS "Profile, Level, Tier:"
+.TP
+\fB\-\-profile <string>
+Enforce an encode profile: main, main10, mainstillpicture
+.TP
+\fB\-\-level\-idc <integer|float>
+Force a minumum required decoder level (as '5.0' or '50')
+.TP
+\fB\-\-[no\-]high\-tier
+If a decoder level is specified, this modifier selects High tier of that level
+
+.SS "Threading, performance:"
+.TP
+\fB\-\-threads <integer>
+Number of threads for thread pool (0: detect CPU core count, default)
+.TP
+\fB\-F/\-\-frame\-threads <integer>
+Number of concurrently encoded frames. 0: auto\-determined by core count
+.TP
+\fB\-\-[no\-]wpp
+Enable Wavefront Parallel Processing. Default enabled
+.TP
+\fB\-\-[no\-]pmode
+Parallel mode analysis. Default disabled
+.TP
+\fB\-\-[no\-]pme
+Parallel motion estimation. Default disabled
+.TP
+\fB\-\-[no\-]asm <bool|int|string>
+Override CPU detection. Default: auto
+
+.SS Presets:
+.TP
+\fB\-p/\-\-preset <string>
+Trade off performance for compression efficiency. Default medium
+.br
+ultrafast, superfast, veryfast, faster, fast, medium, slow, slower, veryslow, or placebo
+.TP
+\fB\-t/--tune <string>
+Tune the settings for a particular type of source or situation:"
+.br
+psnr, ssim, zerolatency, or fastdecode
+
+.SS "Quad-Tree size and depth:"
+.TP
+\fB\-s/\-\-ctu <64|32|16>
+Maximum CU size (default: 64x64). Default 64
+.TP
+\fB\-\-tu\-intra\-depth <integer>
+Max TU recursive depth for intra CUs. Default 1
+.TP
+\fB\-\-tu\-inter\-depth <integer>
+Max TU recursive depth for inter CUs. Default 1
+.TP
+\fB\-\-[no\-]rect
+Enable rectangular motion partitions Nx2N and 2NxN. Default disabled
+.TP
+\fB\-\-[no\-]amp
+Enable asymmetric motion partitions, requires \fB\-\-rect\fR. Default disabled
+.TP
+\fB\-\-rd <0..6>
+Level of RD in mode decision 0:least....6:full RDO. Default 3
+.TP
+\fB\-\-psy\-rd <0..2.0>
+Strength of psycho\-visual rate distortion optimization, 0 to disable. Default 0.000000
+.TP
+\fB\-\-psy\-rdoq <0..50.0>
+Strength of psycho\-visual optimization in quantization, 0 to disable. Default 0.000000
+.TP
+\fB\-\-nr <integer>
+An integer value in range of 100 to 1000, which denotes strength of noise reduction. Default disabled
+.TP
+\fB\-\-[no\-]tskip\-fast
+Enable fast intra transform skipping. Default disabled
+.TP
+\fB\-\-[no\-]early\-skip
+Enable early SKIP detection. Default disabled
+.TP
+\fB\-\-[no\-]fast\-cbf
+Enable early outs based on whether residual is coded. Default disabled
+
+.SS "Coding tools:"
+.TP
+\fB\-w/\-\-[no\-]weightp
+Enable weighted prediction in P slices. Default enabled
+.TP
+\fB\-\-[no\-]weightb
+Enable weighted prediction in B slices. Default disabled
+.TP
+\fB\-\-[no\-]cu-lossless
+Consider lossless mode in CU RDO decisions. Default disabled
+.TP
+\fB\-\-[no\-]signhide
+Hide sign bit of one coeff per TU (rdo). Default enabled
+.TP
+\fB\-\-[no\-]tskip
+Enable intra transform skipping. Default disabled
+
+.SS "Temporal / motion search options:"
+.TP
+\fB\-\-me <string>
+Motion search method dia hex umh star full. Default 1
+.TP
+\fB\-m/\-\-subme <integer>
+Amount of subpel refinement to perform (0:least .. 7:most). Default 2
+.TP
+\fB\-\-merange <integer>
+Motion search range. Default 57
+.TP
+\fB\-\-max\-merge <1..5>
+Maximum number of merge candidates. Default 2
+.TP
+\fB\-\-[no\-]temporal\-mvp
+Enable temporal MV predictors. Default enabled
+
+.SS "Spatial / intra options:"
+.TP
+\fB\-\-[no\-]strong\-intra\-smoothing
+Enable strong intra smoothing for 32x32 blocks. Default enabled
+.TP
+\fB\-\-[no\-]constrained\-intra
+Constrained intra prediction (use only intra coded reference pixels) Default disabled
+.TP
+\fB\-\-[no\-]b\-intra
+Enable intra in B frames in veryslow presets. Default disabled
+.TP
+\fB\-\-[no\-]fast\-intra
+Enable faster search method for angular intra predictions. Default disabled
+.TP
+\fB\-\-rdpenalty <0..2>
+penalty for 32x32 intra TU in non\-I slices. 0:disabled 1:RD\-penalty 2:maximum. Default 0
+
+.SS "Slice decision options:"
+.TP
+\fB\-\-[no\-]open\-gop
+Enable open\-GOP, allows I slices to be non\-IDR. Default enabled
+.TP
+\fB\-I/\-\-keyint <integer>
+Max IDR period in frames. \-1 for infinite\-gop. Default 250
+.TP
+\fB\-i/\-\-min\-keyint <integer>
+Scenecuts closer together than this are coded as I, not IDR. Default: auto
+.TP
+\fB\-\-no\-scenecut
+Disable adaptive I\-frame decision
+.TP
+\fB\-\-scenecut <integer>
+How aggressively to insert extra I\-frames. Default 40
+.TP
+\fB\-\-rc\-lookahead <integer>
+Number of frames for frame\-type lookahead (determines encoder latency) Default 20
+.TP
+\fB\-\-bframes <integer>
+Maximum number of consecutive b\-frames (now it only enables B GOP structure) Default 4
+.TP
+\fB\-\-bframe\-bias <integer>
+Bias towards B frame decisions. Default 0
+.TP
+\fB\-\-b\-adapt <0..2>
+0 \- none, 1 \- fast, 2 \- full (trellis) adaptive B frame scheduling. Default 2
+.TP
+\fB\-\-[no\-]b\-pyramid
+Use B\-frames as references. Default enabled
+.TP
+\fB\-\-ref <integer>
+max number of L0 references to be allowed (1 .. 16) Default 3
+.TP
+\fB\-\-qpfile <string>
+Force frametypes and QPs for some or all frames
+.br
+Format of each line: framenumber frametype QP
+.br
+QP is optional (none lets x265 choose). Frametypes: I,i,P,B,b.
+.br
+QPs are restricted by qpmin/qpmax.
+.PP
+
+.SS "Rate control, Quantization:"
+.TP
+\fB\-\-bitrate <integer>
+Target bitrate (kbps) for ABR (implied). Default 0
+.TP
+\fB\-\-crf <float>
+Quality\-based VBR (0\-51). Default 28.000000
+.TP
+\fB\-\-[no\-]lossless
+Enable lossless: bypass transform, quant and loop filters globally. Default disabled
+.TP
+\fB\-\-crf\-max <float>
+With CRF+VBV, limit RF to this value. Default 0.000000
+.br
+May cause VBV underflows!
+.TP
+\fB\-\-crf\-min <float>
+With CRF+VBV, limit RF to this value. Default 0.000000
+.br
+this specifies a minimum rate factor value for encode!
+.TP
+\fB\-\-vbv\-maxrate <integer>
+Max local bitrate (kbit/s). Default 0
+.TP
+\fB\-\-vbv\-bufsize <integer>
+Set size of the VBV buffer (kbit). Default 0
+.TP
+\fB\-\-vbv\-init <float>
+Initial VBV buffer occupancy (fraction of bufsize or in kbits). Default 0.900000
+.TP
+\fB\-\-aq\-mode <integer>
+Mode for Adaptive Quantization \- 0:none 1:uniform AQ 2:auto variance. Default 2
+.TP
+\fB\-\-aq\-strength <float>
+Reduces blocking and blurring in flat and textured areas.(0 to 3.0). Default 1.000000
+.TP
+\fB\-\-[no\-]cutree
+Enable cutree for Adaptive Quantization. Default enabled
+.TP
+\fB\-\-ipratio <float>
+QP factor between I and P. Default 1.400000
+.TP
+\fB\-\-pbratio <float>
+QP factor between P and B. Default 1.300000
+.TP
+\fB\-\-cbqpoffs <integer>
+Chroma Cb QP Offset. Default 0
+.TP
+\fB\-\-crqpoffs <integer>
+Chroma Cr QP Offset. Default 0
+.TP
+\fB\-\-stats
+Filename for stats file in multipass pass rate control. Default x265_2pass.log
+.TP
+\fB\-\-pass
+Multi pass rate control.
+.br
+ \- 1 : First pass, creates stats file
+.br
+ \- 2 : Last pass, does not overwrite stats file
+.br
+ \- 3 : Nth pass, overwrites stats file
+.TP
+\fB\-\-[no\-]slow\-firstpass
+Enable a slow first pass in a multipass rate control mode. Default disabled
+.TP
+\fB\-\-analysis\-mode <string|int>
+save \- Dump analysis info into file, load \- Load analysis buffers from the file. Default 0
+.TP
+\fB\-\-analysis-file <filename>
+Specify file name used for either dumping or reading analysis data.
+.TP
+\fB\-\-scaling\-list <string>
+Specify a file containing HM style quant scaling lists or 'default' or 'off'. Default: off
+.TP
+\fB\-\-lambda\-file <string>
+Specify a file containing replacement values for the lambda tables
+.br
+MAX_MAX_QP+1 floats for lambda table, then again for lambda2 table
+.br
+Blank lines and lines starting with hash(#) are ignored
+.br
+Comma is considered to be white-space
+
+.SS "Loop filters (deblock and SAO):"
+.TP
+\fB\-\-[no\-]lft
+Enable Deblocking Loop Filter. Default enabled
+.TP
+\fB\-\-[no\-]sao
+Enable Sample Adaptive Offset. Default enabled
+.TP
+\fB\-\-[no\-]sao\-non\-deblock
+Use non\-deblocked pixels, else right/bottom boundary areas skipped. Default disabled
+
+.SS "VUI options:"
+.TP
+\fB\-\-sar <width:height|int>
+Sample Aspect Ratio, the ratio of width to height of an individual pixel.
+.br
+Choose from 0=undef, 1=1:1("square"), 2=12:11, 3=10:11, 4=16:11,
+5=40:33, 6=24:11, 7=20:11, 8=32:11, 9=80:33, 10=18:11, 11=15:11,
+12=64:33, 13=160:99, 14=4:3, 15=3:2, 16=2:1 or custom ratio of <int:int>. Default 0
+.TP
+\fB\-\-crop\-rect <string>
+Add 'left,top,right,bottom' to the bitstream\-level cropping rectangle
+.TP
+\fB\-\-overscan <string>
+Specify whether it is appropriate for decoder to show cropped region: undef, show or crop. Default undef
+.TP
+\fB\-\-videoformat <string>
+Specify video format from undef, component, pal, ntsc, secam, mac. Default undef
+.TP
+\fB\-\-range <string>
+Specify black level and range of luma and chroma signals as full or limited Default limited
+.TP
+\fB\-\-colorprim <string>
+Specify color primaries from undef, bt709, bt470m, bt470bg, smpte170m,
+smpte240m, film, bt2020. Default undef
+.TP
+\fB\-\-transfer <string>
+Specify transfer characteristics from undef, bt709, bt470m, bt470bg, smpte170m,
+smpte240m, linear, log100, log316, iec61966\-2\-4, bt1361e, iec61966\-2\-1,
+bt2020\-10, bt2020\-12. Default undef
+.TP
+\fB\-\-colormatrix <string>
+Specify color matrix setting from undef, bt709, fcc, bt470bg, smpte170m,
+smpte240m, GBR, YCgCo, bt2020nc, bt2020c. Default undef
+.TP
+\fB\-\-chromaloc <integer>
+Specify chroma sample location (0 to 5). Default of 0
+
+.SS "Bitstream options:"
+.TP
+\fB\-\-[no\-]info
+Emit SEI identifying encoder and parameters. Default enabled
+.TP
+\fB\-\-[no\-]aud
+Emit access unit delimiters at the start of each access unit. Default disabled
+.TP
+\fB\-\-[no\-]hrd
+Enable HRD parameters signalling. Default disabled
+.TP
+\fB\-\-[no\-]repeat\-headers
+Emit SPS and PPS headers at each keyframe. Default disabled
+.TP
+\fB\-\-hash <integer>
+Decoded Picture Hash SEI 0: disabled, 1: MD5, 2: CRC, 3: Checksum. Default 0
+
+.SS "Reconstructed video options (debugging):"
+.TP
+\fB\-r/\-\-recon <filename>
+Reconstructed raw image YUV or Y4M output file name
+.TP
+\fB\-\-recon\-depth <integer>
+Bit\-depth of reconstructed raw image file. Defaults to input bit depth, or 8 if Y4M
+.SH COPYRIGHT
+Copyright \(co 2013\-2014 MulticoreWare, Inc.
+.PP
+The x265 software is owned and copyrighted by MulticoreWare, Inc.
+MulticoreWare is committed to offering the x265 software under the GNU
+GPL v2 license. Companies who do not wish to integrate the x265
+Software in their products under the terms of the GPL license can
+contact MulticoreWare (\fIlicense@x265.com\fR) to obtain a commercial
+license agreement. Companies who use x265 under the GPL may also wish
+to work with MulticoreWare to accelerate the development of specific
+features or optimized support for specific hardware or software
+platforms, or to contract for support.
+.PP
+The GNU GPL v2 license or the x265 commercial license agreement govern
+your rights to access the copyrighted x265 software source code, but do
+not cover any patents that may be applicable to the function of binary
+executable software created from the x265 source code. You are
+responsible for understanding the laws in your country, and for
+licensing all applicable patent rights needed for use or distribution of
+software applications created from the x265 source code. A good place
+to start is with the Motion Picture Experts Group \- Licensing Authority
+\- HEVC Licensing Program.
+.PP
+x265 is a registered trademark of MulticoreWare, Inc. The x265 logo is
+a trademark of MulticoreWare, and may only be used with explicit written
+permission. All rights reserved.
+
+.SH "SEE ALSO"
+.TP
+\fIhttp://x265.readthedocs.org/en/default/cli.html\fR
+online documentation