+libcec (2.0.4-1) unstable; urgency=low
+
+ * changed:
+ * dropped obsolete cec-config
+ * added CEC_CLIENT_VERSION_CURRENT and CEC_SERVER_VERSION_CURRENT. closes
+ #88
+ * support colon separated data for the 'tx' command in cec-client
+ * mark the adapter as (in)active source for firmware v3+
+ * fixed:
+ * only change the handler of the primary device if the tv has a quirks mode
+ not for other devices
+ * send an active source message when the route was set to the physical
+ address that is handled by libCEC
+ * default double tap timeout wasn't set for panasonic
+ * philips TVs sometimes keep sending key presses without key releases
+ * philips TVs ignore 'image view on' right after they were sent into
+ standby. check the power status of the tv every 5 seconds, until it
+ reports to have powered on
+ * mark a device as powered on when receiving a stream path or routing
+ change
+ * update the active source status correctly on stream path changes
+ * ensure that we only send 'image view on' when needed
+ * mark the TV as 'in transition standby -> on' after sending
+ 'image view on', so we don't spam the TV with 'image view on' command
+ while waiting for it to finish powering up. bugzid: 1603. bugzid: 1609.
+ bugzid: 1592
+ * request the active source before requesting device information in
+ cec-client, or it'll display incorrect information when called the first
+ time
+ * update the value of CCECProcessor::m_bMonitor when registering a client.
+ SetControlled() wasn't called on exit, so it took 30 seconds until it was
+ auto-enabled
+ * silence 'unused' warning properly. closes #86
+ * only change the type of the client to 'playback device' instead of
+ 'recorder' for panasonic if the TV is a panasonic. issue #84
+ * always poll the TV if it's marked as not present. issue #83. issue #84
+ * only set m_iCurrentButton when the duration isn't known yet. fixes
+ duplicate key press for vendor remote codes. closes #81
+ * delete the right registry key
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 14 Nov 2012 18:34:00 +0100
+
libcec (2.0.3-1) unstable; urgency=low
* changed:
-SUBDIRS = src/lib src/testclient src/cec-config
+SUBDIRS = src/lib src/testclient
docs:
echo "Updating documentation (if doxygen is present)"
LIB_INFO="$LIB_INFO on `uname -s` `uname -r` (`uname -m`)"
fi
-## redefine the LIBS, so cec-client and cec-config aren't linked against things they don't need
+## redefine the LIBS, so cec-client isn't linked against things they don't need
LIBS_LIBCEC="$LIBS"
LIBS="$libs_client"
AC_SUBST([USE_P8_USB_DETECT])
AC_SUBST([USE_RPI_API])
AC_CONFIG_FILES([src/lib/libcec.pc])
-AC_OUTPUT([Makefile src/lib/Makefile src/testclient/Makefile src/cec-config/Makefile])
+AC_OUTPUT([Makefile src/lib/Makefile src/testclient/Makefile])
cat <<EOB
+libcec (2.0.4-1) unstable; urgency=low
+
+ * changed:
+ * dropped obsolete cec-config
+ * added CEC_CLIENT_VERSION_CURRENT and CEC_SERVER_VERSION_CURRENT. closes
+ #88
+ * support colon separated data for the 'tx' command in cec-client
+ * mark the adapter as (in)active source for firmware v3+
+ * fixed:
+ * only change the handler of the primary device if the tv has a quirks mode
+ not for other devices
+ * send an active source message when the route was set to the physical
+ address that is handled by libCEC
+ * default double tap timeout wasn't set for panasonic
+ * philips TVs sometimes keep sending key presses without key releases
+ * philips TVs ignore 'image view on' right after they were sent into
+ standby. check the power status of the tv every 5 seconds, until it
+ reports to have powered on
+ * mark a device as powered on when receiving a stream path or routing
+ change
+ * update the active source status correctly on stream path changes
+ * ensure that we only send 'image view on' when needed
+ * mark the TV as 'in transition standby -> on' after sending
+ 'image view on', so we don't spam the TV with 'image view on' command
+ while waiting for it to finish powering up. bugzid: 1603. bugzid: 1609.
+ bugzid: 1592
+ * request the active source before requesting device information in
+ cec-client, or it'll display incorrect information when called the first
+ time
+ * update the value of CCECProcessor::m_bMonitor when registering a client.
+ SetControlled() wasn't called on exit, so it took 30 seconds until it was
+ auto-enabled
+ * silence 'unused' warning properly. closes #86
+ * only change the type of the client to 'playback device' instead of
+ 'recorder' for panasonic if the TV is a panasonic. issue #84
+ * always poll the TV if it's marked as not present. issue #83. issue #84
+ * only set m_iCurrentButton when the duration isn't known yet. fixes
+ duplicate key press for vendor remote codes. closes #81
+ * delete the right registry key
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 14 Nov 2012 18:34:00 +0100
+
libcec (2.0.3-1) unstable; urgency=low
* changed:
CEC_CLIENT_VERSION_2_0_1 = 0x2001,
CEC_CLIENT_VERSION_2_0_2 = 0x2002,
CEC_CLIENT_VERSION_2_0_3 = 0x2003,
- CEC_CLIENT_VERSION_CURRENT = 0x2003
+ CEC_CLIENT_VERSION_2_0_4 = 0x2004,
+ CEC_CLIENT_VERSION_CURRENT = 0x2004
} cec_client_version;
typedef enum cec_server_version
CEC_SERVER_VERSION_2_0_1 = 0x2001,
CEC_SERVER_VERSION_2_0_2 = 0x2002,
CEC_SERVER_VERSION_2_0_3 = 0x2003,
- CEC_SERVER_VERSION_CURRENT = 0x2003
+ CEC_SERVER_VERSION_2_0_4 = 0x2004,
+ CEC_SERVER_VERSION_CURRENT = 0x2004
} cec_server_version;
struct libcec_configuration
+++ /dev/null
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <ItemGroup Label="ProjectConfigurations">
- <ProjectConfiguration Include="Debug|Win32">
- <Configuration>Debug</Configuration>
- <Platform>Win32</Platform>
- </ProjectConfiguration>
- <ProjectConfiguration Include="Debug|x64">
- <Configuration>Debug</Configuration>
- <Platform>x64</Platform>
- </ProjectConfiguration>
- <ProjectConfiguration Include="Release|Win32">
- <Configuration>Release</Configuration>
- <Platform>Win32</Platform>
- </ProjectConfiguration>
- <ProjectConfiguration Include="Release|x64">
- <Configuration>Release</Configuration>
- <Platform>x64</Platform>
- </ProjectConfiguration>
- </ItemGroup>
- <PropertyGroup Label="Globals">
- <ProjectGuid>{00EE7081-9EEE-485C-B7CE-699A7BCA40C1}</ProjectGuid>
- <Keyword>Win32Proj</Keyword>
- <RootNamespace>cec-config</RootNamespace>
- <ProjectName>cec-config</ProjectName>
- </PropertyGroup>
- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
- <ConfigurationType>Application</ConfigurationType>
- <UseDebugLibraries>true</UseDebugLibraries>
- <CharacterSet>MultiByte</CharacterSet>
- </PropertyGroup>
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
- <ConfigurationType>Application</ConfigurationType>
- <UseDebugLibraries>true</UseDebugLibraries>
- <CharacterSet>MultiByte</CharacterSet>
- </PropertyGroup>
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
- <ConfigurationType>Application</ConfigurationType>
- <UseDebugLibraries>false</UseDebugLibraries>
- <CharacterSet>MultiByte</CharacterSet>
- </PropertyGroup>
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
- <ConfigurationType>Application</ConfigurationType>
- <UseDebugLibraries>false</UseDebugLibraries>
- <CharacterSet>MultiByte</CharacterSet>
- </PropertyGroup>
- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
- <ImportGroup Label="ExtensionSettings">
- </ImportGroup>
- <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
- </ImportGroup>
- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
- </ImportGroup>
- <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
- </ImportGroup>
- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
- </ImportGroup>
- <PropertyGroup Label="UserMacros" />
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
- <OutDir>$(SolutionDir)..\build\</OutDir>
- <TargetName>cec-config</TargetName>
- </PropertyGroup>
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
- <OutDir>$(SolutionDir)..\build\</OutDir>
- <TargetName>cec-config.x64</TargetName>
- </PropertyGroup>
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
- <OutDir>$(SolutionDir)..\build\</OutDir>
- <TargetName>cec-config</TargetName>
- </PropertyGroup>
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
- <OutDir>$(SolutionDir)..\build\</OutDir>
- <TargetName>cec-config.x64</TargetName>
- </PropertyGroup>
- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
- <ClCompile>
- <PrecompiledHeader>
- </PrecompiledHeader>
- <WarningLevel>Level4</WarningLevel>
- <Optimization>Disabled</Optimization>
- <PreprocessorDefinitions>_USE_32BIT_TIME_T;_DEBUG;_CRT_SECURE_NO_WARNINGS;_WINSOCKAPI_;__STDC_CONSTANT_MACROS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
- <TreatWarningAsError>true</TreatWarningAsError>
- <DisableSpecificWarnings>
- </DisableSpecificWarnings>
- <AdditionalIncludeDirectories>$(SolutiontDir)..\include;$(SolutionDir)..\src;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
- </ClCompile>
- <Link>
- <SubSystem>Console</SubSystem>
- <GenerateDebugInformation>true</GenerateDebugInformation>
- <Version>
- </Version>
- </Link>
- </ItemDefinitionGroup>
- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
- <ClCompile>
- <PrecompiledHeader>
- </PrecompiledHeader>
- <WarningLevel>Level4</WarningLevel>
- <Optimization>Disabled</Optimization>
- <PreprocessorDefinitions>_WIN64;_DEBUG;_CRT_SECURE_NO_WARNINGS;_WINSOCKAPI_;__STDC_CONSTANT_MACROS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
- <TreatWarningAsError>true</TreatWarningAsError>
- <DisableSpecificWarnings>
- </DisableSpecificWarnings>
- <AdditionalIncludeDirectories>$(SolutiontDir)..\include;$(SolutionDir)..\src;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
- </ClCompile>
- <Link>
- <SubSystem>Console</SubSystem>
- <GenerateDebugInformation>true</GenerateDebugInformation>
- <AdditionalDependencies>
- </AdditionalDependencies>
- <Version>
- </Version>
- </Link>
- </ItemDefinitionGroup>
- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
- <ClCompile>
- <WarningLevel>Level4</WarningLevel>
- <PrecompiledHeader>
- </PrecompiledHeader>
- <Optimization>Full</Optimization>
- <FunctionLevelLinking>false</FunctionLevelLinking>
- <IntrinsicFunctions>true</IntrinsicFunctions>
- <PreprocessorDefinitions>_USE_32BIT_TIME_T;_CRT_SECURE_NO_WARNINGS;_WINSOCKAPI_;__STDC_CONSTANT_MACROS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
- <TreatWarningAsError>true</TreatWarningAsError>
- <DisableSpecificWarnings>
- </DisableSpecificWarnings>
- <AdditionalIncludeDirectories>$(SolutionDir)..\include;$(SolutionDir)..\src;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
- <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>
- </ClCompile>
- <Link>
- <SubSystem>Console</SubSystem>
- <GenerateDebugInformation>false</GenerateDebugInformation>
- <EnableCOMDATFolding>true</EnableCOMDATFolding>
- <OptimizeReferences>true</OptimizeReferences>
- <Version>
- </Version>
- </Link>
- </ItemDefinitionGroup>
- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
- <ClCompile>
- <WarningLevel>Level4</WarningLevel>
- <PrecompiledHeader>
- </PrecompiledHeader>
- <Optimization>Full</Optimization>
- <IntrinsicFunctions>true</IntrinsicFunctions>
- <PreprocessorDefinitions>_WIN64;_CRT_SECURE_NO_WARNINGS;_WINSOCKAPI_;__STDC_CONSTANT_MACROS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
- <TreatWarningAsError>true</TreatWarningAsError>
- <DisableSpecificWarnings>
- </DisableSpecificWarnings>
- <AdditionalIncludeDirectories>$(SolutionDir)..\include;$(SolutionDir)..\src;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
- <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>
- </ClCompile>
- <Link>
- <SubSystem>Console</SubSystem>
- <GenerateDebugInformation>false</GenerateDebugInformation>
- <EnableCOMDATFolding>true</EnableCOMDATFolding>
- <OptimizeReferences>true</OptimizeReferences>
- <AdditionalDependencies>
- </AdditionalDependencies>
- <Version>
- </Version>
- </Link>
- </ItemDefinitionGroup>
- <ItemGroup>
- <ClInclude Include="..\include\cec.h" />
- <ClInclude Include="..\include\cecloader.h" />
- <ClInclude Include="..\src\lib\platform\threads\mutex.h" />
- </ItemGroup>
- <ItemGroup>
- <ClCompile Include="..\src\cec-config\cec-config.cpp" />
- <ClCompile Include="..\src\lib\platform\windows\os-threads.cpp" />
- </ItemGroup>
- <ItemGroup>
- <ResourceCompile Include="cec-config.rc" />
- </ItemGroup>
- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
- <ImportGroup Label="ExtensionTargets">
- </ImportGroup>
-</Project>
\ No newline at end of file
+++ /dev/null
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <ItemGroup>
- <Filter Include="exports">
- <UniqueIdentifier>{cc0a01c1-e1e7-4af8-9656-fa9463140613}</UniqueIdentifier>
- </Filter>
- <Filter Include="platform">
- <UniqueIdentifier>{f08c0a80-22d9-4bdd-90de-b9cf5fa88f99}</UniqueIdentifier>
- </Filter>
- </ItemGroup>
- <ItemGroup>
- <ClInclude Include="..\include\cec.h">
- <Filter>exports</Filter>
- </ClInclude>
- <ClInclude Include="..\include\cecloader.h">
- <Filter>exports</Filter>
- </ClInclude>
- <ClInclude Include="..\src\lib\platform\threads\mutex.h">
- <Filter>platform</Filter>
- </ClInclude>
- </ItemGroup>
- <ItemGroup>
- <ClCompile Include="..\src\cec-config\cec-config.cpp" />
- <ClCompile Include="..\src\lib\platform\windows\os-threads.cpp">
- <Filter>platform</Filter>
- </ClCompile>
- </ItemGroup>
- <ItemGroup>
- <ResourceCompile Include="cec-config.rc" />
- </ItemGroup>
-</Project>
\ No newline at end of file
Config = new LibCECConfiguration();
Config.DeviceTypes.Types[0] = CecDeviceType.RecordingDevice;
Config.DeviceName = "CEC Tester";
- Config.ClientVersion = CecClientVersion.Version2_0_3;
+ Config.ClientVersion = CecClientVersion.Version2_0_4;
Config.SetCallbacks(this);
LogLevel = (int)CecLogLevel.All;
// You can specify all the values or you can default the Build and Revision Numbers
// by using the '*' as shown below:
// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("2.0.3.0")]
-[assembly: AssemblyFileVersion("2.0.3.0")]
+[assembly: AssemblyVersion("2.0.4.0")]
+[assembly: AssemblyFileVersion("2.0.4.0")]
[assembly:AssemblyTrademarkAttribute("")];
[assembly:AssemblyCultureAttribute("")];
-[assembly:AssemblyVersionAttribute("2.0.3.0")];
+[assembly:AssemblyVersionAttribute("2.0.4.0")];
[assembly:ComVisible(false)];
[assembly:CLSCompliantAttribute(true)];
/// <summary>
/// v2.0.3
/// </summary>
- Version2_0_3 = 0x2003
+ Version2_0_3 = 0x2003,
+ /// <summary>
+ /// v2.0.4
+ /// </summary>
+ Version2_0_4 = 0x2004
};
/// <summary>
/// <summary>
/// v2.0.3
/// </summary>
- Version2_0_3 = 0x2003
+ Version2_0_3 = 0x2003,
+ /// <summary>
+ /// v2.0.4
+ /// </summary>
+ Version2_0_4 = 0x2004
};
/// <summary>
// You can specify all the values or you can default the Build and Revision Numbers
// by using the '*' as shown below:
// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("2.0.3.0")]
-[assembly: AssemblyFileVersion("2.0.3.0")]
+[assembly: AssemblyVersion("2.0.4.0")]
+[assembly: AssemblyFileVersion("2.0.4.0")]
{
if (_config == null)
{
- _config = new LibCECConfiguration { DeviceName = "CEC Tray", ClientVersion = CecClientVersion.Version2_0_3 };
+ _config = new LibCECConfiguration { DeviceName = "CEC Tray", ClientVersion = CecClientVersion.Version2_0_4 };
_config.DeviceTypes.Types[0] = CecDeviceType.RecordingDevice;
_config.SetCallbacks(this);
+++ /dev/null
-bin_PROGRAMS = cec-config
-cec_config_SOURCES = cec-config.cpp
-
-cec_config_CPPFLAGS = -I@abs_top_srcdir@/include
-cec_config_LDFLAGS = @LIBS@
+++ /dev/null
-/*
- * This file is part of the libCEC(R) library.
- *
- * libCEC(R) is Copyright (C) 2011-2012 Pulse-Eight Limited. All rights reserved.
- * libCEC(R) is an original work, containing original code.
- *
- * libCEC(R) is a trademark of Pulse-Eight Limited.
- *
- * This program is dual-licensed; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- *
- * Alternatively, you can license this library under a commercial license,
- * please contact Pulse-Eight Licensing for more information.
- *
- * For more information contact:
- * Pulse-Eight Licensing <license@pulse-eight.com>
- * http://www.pulse-eight.com/
- * http://www.pulse-eight.net/
- */
-
-#include "../env.h"
-#include "../include/cec.h"
-
-#include <cstdio>
-#include <fcntl.h>
-#include <iostream>
-#include <fstream>
-#include <string>
-#include <sstream>
-#include <signal.h>
-#include "../lib/platform/threads/mutex.h"
-#include "../lib/platform/util/timeutils.h"
-#include "../lib/implementations/CECCommandHandler.h"
-#include "../lib/platform/util/StdString.h"
-
-using namespace CEC;
-using namespace std;
-using namespace PLATFORM;
-
-#include <cecloader.h>
-
-CMutex g_outputMutex;
-
-CEvent g_responseEvent;
-cec_opcode g_lastCommand = CEC_OPCODE_NONE;
-
-CEvent g_keyEvent;
-cec_user_control_code g_lastKey = CEC_USER_CONTROL_CODE_UNKNOWN;
-
-ICECCallbacks g_callbacks;
-libcec_configuration g_config;
-ICECAdapter * g_parser;
-
-inline void PrintToStdOut(const char *strFormat, ...)
-{
- CStdString strLog;
-
- va_list argList;
- va_start(argList, strFormat);
- strLog.FormatV(strFormat, argList);
- va_end(argList);
-
- CLockObject lock(g_outputMutex);
- cout << strLog << endl;
-}
-
-//get the first word (separated by whitespace) from string data and place that in word
-//then remove that word from string data
-bool GetWord(string& data, string& word)
-{
- stringstream datastream(data);
- string end;
-
- datastream >> word;
- if (datastream.fail())
- {
- data.clear();
- return false;
- }
-
- size_t pos = data.find(word) + word.length();
-
- if (pos >= data.length())
- {
- data.clear();
- return true;
- }
-
- data = data.substr(pos);
-
- datastream.clear();
- datastream.str(data);
-
- datastream >> end;
- if (datastream.fail())
- data.clear();
-
- return true;
-}
-
-int CecLogMessage(void *UNUSED(cbParam), const cec_log_message message)
-{
- switch (message.level)
- {
- case CEC_LOG_ERROR:
- PrintToStdOut("ERROR:\t%s", message.message);
- break;
- case CEC_LOG_WARNING:
- PrintToStdOut("ERROR:\t%s", message.message);
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-int CecKeyPress(void *UNUSED(cbParam), const cec_keypress key)
-{
- g_lastKey = key.keycode;
- g_keyEvent.Signal();
- return 0;
-}
-
-int CecCommand(void *UNUSED(cbParam), const cec_command command)
-{
- g_lastCommand = command.opcode;
- g_responseEvent.Signal();
- return 0;
-}
-
-bool ProcessConsoleCommand(string &input)
-{
- if (!input.empty())
- {
- string command;
- if (GetWord(input, command))
- {
- if (command == "q" || command == "quit")
- return false;
- }
- }
- return true;
-}
-
-bool OpenConnection(cec_device_type type = CEC_DEVICE_TYPE_RECORDING_DEVICE)
-{
- g_config.Clear();
- snprintf(g_config.strDeviceName, 13, "CEC-config");
- g_config.callbackParam = NULL;
- g_config.clientVersion = (uint32_t)CEC_CLIENT_VERSION_CURRENT;
- g_callbacks.CBCecLogMessage = &CecLogMessage;
- g_callbacks.CBCecKeyPress = &CecKeyPress;
- g_callbacks.CBCecCommand = &CecCommand;
- g_config.callbacks = &g_callbacks;
-
- g_config.deviceTypes.Add(type);
-
- g_parser = LibCecInitialise(&g_config);
- if (!g_parser)
- return false;
-
- // init video on targets that need this
- g_parser->InitVideoStandalone();
-
- CStdString strPort;
- cec_adapter devices[10];
- uint8_t iDevicesFound = g_parser->FindAdapters(devices, 10, NULL);
- if (iDevicesFound <= 0)
- {
- PrintToStdOut("autodetect FAILED");
- UnloadLibCec(g_parser);
- return false;
- }
- else
- {
- strPort = devices[0].comm;
- }
-
- PrintToStdOut("opening a connection to the CEC adapter...");
- if (!g_parser->Open(strPort.c_str()))
- {
- PrintToStdOut("unable to open the device on port %s", strPort.c_str());
- UnloadLibCec(g_parser);
- return false;
- }
-
- g_parser->GetCurrentConfiguration(&g_config);
- PrintToStdOut("CEC Parser created - libCEC version %s", g_parser->ToString((cec_server_version)g_config.serverVersion));
-
- return true;
-}
-
-int8_t FindPhysicalAddressPortNumber(void)
-{
- PrintToStdOut("Enter the HDMI port number to which you connected your CEC adapter, followed by <enter>. Valid ports are in the range 1-15. Anything else will cancel this wizard.");
- string input;
- getline(cin, input);
- cin.clear();
- if (input.empty())
- return -1;
-
- int hdmiport = atoi(input.c_str());
- return (hdmiport < 1 || hdmiport > 15) ? -1 : (int8_t)hdmiport;
-}
-
-cec_logical_address FindPhysicalAddressBaseDevice(void)
-{
- PrintToStdOut("Press 1 if your CEC adapter is connected to your TV or\nPress 2 if it's connected to an AVR, followed by <enter>. Anything else will cancel this wizard.");
-
- string input;
- getline(cin, input);
- cin.clear();
- if (input.empty() || (input != "1" && input != "2"))
- {
- PrintToStdOut("Exiting...");
- return CECDEVICE_UNKNOWN;
- }
- return (input == "2") ?
- CECDEVICE_AUDIOSYSTEM :
- CECDEVICE_TV;
-}
-
-uint16_t FindPhysicalAddress(void)
-{
- PrintToStdOut("=== Physical Address Configuration ===\n");
- uint16_t iAddress(CEC_INVALID_PHYSICAL_ADDRESS);
-
- PrintToStdOut("Do you want to let libCEC try to autodetect the address (y/n)?");
- string input;
- getline(cin, input);
- cin.clear();
- if (input == "y" || input == "Y")
- {
- cec_logical_address baseDevice = FindPhysicalAddressBaseDevice();
- if (baseDevice == CECDEVICE_UNKNOWN)
- return iAddress;
-
- int8_t iPortNumber = FindPhysicalAddressPortNumber();
- if (iPortNumber == -1)
- return iAddress;
-
- PrintToStdOut("Trying to detect the physical address...");
- if (!g_parser->SetHDMIPort(baseDevice, iPortNumber))
- PrintToStdOut("Failed. Please enter the address manually, or restart this wizard and use different settings.");
- else
- {
- g_parser->GetCurrentConfiguration(&g_config);
- iAddress = g_parser->GetDevicePhysicalAddress(g_config.logicalAddresses.primary);
- if (iAddress == 0 || iAddress == CEC_INVALID_PHYSICAL_ADDRESS)
- PrintToStdOut("Failed. Please enter the address manually, or restart this wizard and use different settings.");
- }
- }
-
- if (iAddress == 0 || iAddress == CEC_INVALID_PHYSICAL_ADDRESS)
- {
- PrintToStdOut("Please enter the physical address (0001 - FFFE), followed by <enter>.");
- getline(cin, input);
- cin.clear();
-
- int iAddressTmp;
- if (sscanf(input.c_str(), "%x", &iAddressTmp) == 1)
- {
- if (iAddressTmp <= CEC_PHYSICAL_ADDRESS_TV || iAddressTmp > CEC_MAX_PHYSICAL_ADDRESS)
- iAddressTmp = CEC_INVALID_PHYSICAL_ADDRESS;
- iAddress = (uint16_t)iAddressTmp;
- }
- }
-
- if (iAddress != 0)
- {
- g_parser->SetPhysicalAddress(iAddress);
- g_parser->SetActiveSource(g_config.deviceTypes[0]);
- }
-
- return iAddress;
-}
-
-bool PowerOnTV(uint64_t iTimeout = 60000)
-{
- cec_power_status currentTvPower(CEC_POWER_STATUS_UNKNOWN);
- uint64_t iNow = GetTimeMs();
- uint64_t iTarget = iNow + iTimeout;
-
- currentTvPower = g_parser->GetDevicePowerStatus(CECDEVICE_TV);
- if (currentTvPower != CEC_POWER_STATUS_ON)
- {
- PrintToStdOut("Sending 'power on' command to the TV\n=== Please wait ===");
- g_parser->PowerOnDevices(CECDEVICE_TV);
- while (iTarget > iNow)
- {
- g_responseEvent.Wait((uint32_t)(iTarget - iNow));
- if (g_lastCommand == CEC_OPCODE_REQUEST_ACTIVE_SOURCE)
- break;
- iNow = GetTimeMs();
- }
- }
-
- currentTvPower = g_parser->GetDevicePowerStatus(CECDEVICE_TV);
-
- if (currentTvPower != CEC_POWER_STATUS_ON)
- PrintToStdOut("Failed to power on the TV, or the TV does not respond properly");
-
- return currentTvPower == CEC_POWER_STATUS_ON;
-}
-
-void sighandler(int iSignal)
-{
- PrintToStdOut("signal caught: %d - exiting", iSignal);
-
- g_parser->Close();
- UnloadLibCec(g_parser);
-
- exit(1);
-}
-
-int main (int UNUSED(argc), char *UNUSED(argv[]))
-{
- if (signal(SIGINT, sighandler) == SIG_ERR)
- {
- PrintToStdOut("can't register sighandler");
- return -1;
- }
-
- g_callbacks.Clear();
- g_config.Clear();
- PrintToStdOut("=== USB-CEC Adapter Configuration ===\n");
- if (!OpenConnection())
- return 1;
-
- if (!PowerOnTV())
- return 1;
-
- bool bAddressOk(false);
- while (!bAddressOk)
- {
- uint16_t iAddress = FindPhysicalAddress();
-
- PrintToStdOut("Physical address: %4X", iAddress);
- PrintToStdOut("Is this correct (y/n)?");
- string input;
- getline(cin, input);
- cin.clear();
- bAddressOk = (input == "y" || input == "Y");
- }
-
- g_parser->GetCurrentConfiguration(&g_config);
-
- {
- cec_menu_language lang;
- if (g_parser->GetDeviceMenuLanguage(CECDEVICE_TV, &lang))
- {
- PrintToStdOut("TV menu language: %s", lang.language);
- PrintToStdOut("Do you want the application to use the menu language of the TV (y/n)?");
- string input;
- getline(cin, input);
- cin.clear();
- g_config.bUseTVMenuLanguage = (input == "y" || input == "Y") ? 1 : 0;
- }
- else
- {
- PrintToStdOut("The TV did not respond properly to the menu language request.");
- }
- }
-
- {
- PrintToStdOut("Do you want to make the CEC adapter the active source when starting the application (y/n)?");
- string input;
- getline(cin, input);
- cin.clear();
- g_config.bActivateSource = (input == "y" || input == "Y") ? 1 : 0;
- }
-
- {
- PrintToStdOut("Do you want to power on the TV when starting the application (y/n)?");
- string input;
- getline(cin, input);
- cin.clear();
- if (input == "y" || input == "Y")
- g_config.wakeDevices.Set(CECDEVICE_TV);
- }
-
- {
- PrintToStdOut("Do you want to power off CEC devices when closing the application (y/n)?");
- string input;
- getline(cin, input);
- cin.clear();
- if (input == "y" || input == "Y")
- g_config.powerOffDevices.Set(CECDEVICE_TV);
- }
-
- {
- PrintToStdOut("Do you want to power off CEC devices when the screensaver is activated (y/n)?");
- string input;
- getline(cin, input);
- cin.clear();
- g_config.bPowerOffScreensaver = (input == "y" || input == "Y") ? 1 : 0;
- }
-
- {
- PrintToStdOut("Do you want to put the PC in standby when the TV is put in standby mode (y/n)?");
- string input;
- getline(cin, input);
- cin.clear();
- g_config.bPowerOffOnStandby = (input == "y" || input == "Y") ? 1 : 0;
- }
-
- {
- PrintToStdOut("Do you want to send an inactive source message when stopping the application (y/n)?");
- string input;
- getline(cin, input);
- cin.clear();
- g_config.bSendInactiveSource = (input == "y" || input == "Y") ? 1 : 0;
- }
-
- PrintToStdOut("\n\n=== USB-CEC Adapter Configuration Summary ===");
- PrintToStdOut("HDMI port number: %d", g_config.iHDMIPort);
- PrintToStdOut("Connected to HDMI device: %X", (uint8_t)g_config.baseDevice);
- PrintToStdOut("Physical address: %4X", g_config.iPhysicalAddress);
- PrintToStdOut("Use the TV's language setting: %s", g_config.bUseTVMenuLanguage ? "yes" : "no");
- PrintToStdOut("Make the adapter the active source when starting XBMC: %s", g_config.bActivateSource ? "yes" : "no");
- PrintToStdOut("Power on the TV when starting XBMC: %s", g_config.wakeDevices.IsSet(CECDEVICE_BROADCAST) ? "yes" : "no");
- PrintToStdOut("Power off devices when stopping XBMC: %s", g_config.powerOffDevices.IsSet(CECDEVICE_BROADCAST) ? "yes" : "no");
- PrintToStdOut("Put devices in standby mode when activating screensaver: %s", g_config.bPowerOffScreensaver ? "yes" : "no");
- PrintToStdOut("Put this PC in standby mode when the TV is switched off: %s", g_config.bPowerOffOnStandby ? "yes" : "no");
- PrintToStdOut("Send an inactive source message when stopping XBMC: %s\n\n", g_config.bSendInactiveSource ? "yes" : "no");
-
- PrintToStdOut("Storing settings ...");
- if (g_parser->PersistConfiguration(&g_config))
- PrintToStdOut("Settings stored.");
- else
- PrintToStdOut("The settings could not be stored");
-
- ofstream configOutput;
- configOutput.open("usb_2548_1001.xml");
- if (configOutput.is_open())
- {
- CStdString strWakeDevices;
- for (uint8_t iPtr = 0; iPtr < 16; iPtr++)
- if (g_config.wakeDevices[iPtr])
- strWakeDevices.AppendFormat(" %d", iPtr);
- CStdString strStandbyDevices;
- for (uint8_t iPtr = 0; iPtr < 16; iPtr++)
- if (g_config.powerOffDevices[iPtr])
- strStandbyDevices.AppendFormat(" %d", iPtr);
-
- configOutput <<
- "<settings>\n" <<
- "\t<setting id=\"enabled\" value=\"1\" />\n" <<
- "\t<setting id=\"activate_source\" value=\"" << (int)g_config.bActivateSource << "\" />\n" <<
- "\t<setting id=\"wake_devices\" value=\"" << strWakeDevices.c_str() << "\" />\n" <<
- "\t<setting id=\"standby_devices\" value=\"" << strStandbyDevices.c_str() << "\" />\n" <<
- "\t<setting id=\"cec_standby_screensaver\" value=\"" << (int)g_config.bPowerOffScreensaver << "\" />\n" <<
- "\t<setting id=\"standby_pc_on_tv_standby\" value=\"" << (int)g_config.bPowerOffOnStandby << "\" />\n" <<
- "\t<setting id=\"use_tv_menu_language\" value=\"" << (int)g_config.bUseTVMenuLanguage << "\" />\n" <<
- "\t<setting id=\"physical_address\" value=\"" << hex << g_config.iPhysicalAddress << "\" />\n" <<
- "\t<setting id=\"cec_hdmi_port\" value=\"" << g_config.iHDMIPort << "\" />\n" <<
- "\t<setting id=\"connected_device\" value=\"" << (int)g_config.baseDevice << "\" />\n" <<
- "\t<setting id=\"port\" value=\"\" />\n" <<
- "\t<setting id=\"send_inactive_source\" value=\"" << (int)g_config.bSendInactiveSource << "\" />\n" <<
- "</settings>";
- configOutput.close();
-
- PrintToStdOut("The configuration has been stored in 'usb_2548_1001.xml'. Copy this file to ~/.userdata/peripheral_data to use it in XBMC");
- }
-
- g_parser->StandbyDevices();
- g_parser->Close();
- UnloadLibCec(g_parser);
-
- PrintToStdOut("Press enter to close this wizard.");
- string input;
- getline(cin, input);
- return 0;
-}
return "2.0.2";
case CEC_CLIENT_VERSION_2_0_3:
return "2.0.3";
+ case CEC_CLIENT_VERSION_2_0_4:
+ return "2.0.4";
default:
return "Unknown";
}
return "2.0.2";
case CEC_SERVER_VERSION_2_0_3:
return "2.0.3";
+ case CEC_SERVER_VERSION_2_0_4:
+ return "2.0.4";
default:
return "Unknown";
}
repositories / deb_libcec.git / commitdiff
