+libcec (1.4-1) unstable; urgency=low
+
+ * changed/added:
+ * make libudev optional. if libudev is not available on linux, adapter
+ autodetection will also not be available. fixes compilation on Hardy/ATV1
+ * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET
+ language
+ * added vendor support for LG
+ * added vendor support for Philips
+ * added vendor support for Yamaha
+ * added vendor support for Onkyo
+ * added 'scan' command to cec-client, that displays info about devices on
+ the bus. made all ToString() methods available on the interface.
+ * added '-s' or '--single-command' to cec-client. starting cec-client with
+ this parameter executes a single command in cec-client and does not power
+ on devices on startup and power them off on exit. this way, you can use
+ cec-client in a shell script. since there's some handshaking involved at
+ startup, this is not very fast. to execute a command and only display the
+ result and any error/warning, execute it with
+ RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch
+ files are a bit different)
+ * added physical address option to cec-client. credits @joshua-nord.
+ closes #3
+ * handle image view on and text view on
+ * handle routing information and report physical address opcodes
+ * handle audio status updates
+ * send ping and bootloader commands via the output queue
+ * scan the CEC bus for devices when starting libcec
+ * pass all commands that are directed at libcec to listeners
+ * interface changes:
+ * added GetActiveSource()/cec_get_active_source()
+ * added IsActiveSource()/cec_is_active_source()
+ * added GetDevicePhysicalAddress()/cec_get_device_physical_address()
+ * added GetDeviceOSDName()/cec_get_osd_name()
+ * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/
+ cec_send_key_release()
+ * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(),
+ MuteAudio()/cec_mute_audio()
+ * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/
+ cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type().
+ * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load
+ and when a device with the same physical address is detected, libcec will
+ use the selected hdmi port on that device. should fix source selection on
+ other devices, like an amplifier
+ * added a hook in libcec for physical address autodetection
+ * fixed:
+ * don't request the physical address from the tv (it's always 0x0000)
+ * set the proper ackmask before doing anything else
+ * don't unlock the transmit mutex in CCECProcessor while waiting for an
+ answer
+ * fix device polling
+ * refactor CEC read/write. keep a single lock for all writes, not one per
+ device
+ * ignore other data while waiting for a response
+ * retry failed tranmissions
+ * don't delete a message before it's been sent when starting the bootloader
+ * or when sending a ping
+ * fixed possible segfault when switching the command handler after a vendor
+ * id changed
+ * handle audio opcodes correctly
+ * inactive source should be directly addressed at the TV
+ * don't report a changed physical address when it hasn't changed
+ * routing information sets the stream path, not the physical address
+ * don't scan the whole bus in CCECProcessor::IsActiveDeviceType()
+ * don't request the vendor id from devices that are handled by libcec
+ * mark device status as present when a command was received from a device
+ * always send a power on command in CCECBusDevice::PowerOn()
+ * don't request updates statusses unless needed
+ * report physical address sends 3 parameters, not 2. check whether the
+ device type is correct
+ * devices can send vendor commands from other vendors, so don't assume the
+ device is of a certain vendor when it sends commands with a vendor id
+ * thread safety fixes. bugzid: 19
+ * clear any previous input when opening a connection to the adapter.
+ bugzid: 54
+ * use the correct source address in CSLCommandHandler::HandleVendorCommand()
+ * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5
+ * renamed enum methods. fixes potential macro collision with isset().
+ thanks davilla
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 12 Nov 2011 13:36:00 +0100
+
libcec (1.2-1) unstable; urgency=low
* bugfixes:
repositories / deb_libcec.git / commitdiff
