From: Lars Op den Kamp Date: Fri, 9 Dec 2011 11:16:30 +0000 (+0100) Subject: updated changelog for release v1.3 X-Git-Tag: upstream/2.2.0~1^2~44^2~3 X-Git-Url: https://git.piment-noir.org/?a=commitdiff_plain;h=19330705fe2c96cffad6a9be5b8123c4ed7ba2ff;p=deb_libcec.git updated changelog for release v1.3 --- diff --git a/ChangeLog b/ChangeLog index 5d2c3dd..ff89b35 100644 --- a/ChangeLog +++ b/ChangeLog @@ -19,8 +19,8 @@ libcec (1.4-1) unstable; urgency=low result and any error/warning, execute it with RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch files are a bit different) - * added physical address option to cec-client. credits @joshua-nord. - closes #3 + * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to + cec-client's parameters * handle image view on and text view on * handle routing information and report physical address opcodes * handle audio status updates @@ -77,8 +77,10 @@ libcec (1.4-1) unstable; urgency=low * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5 * renamed enum methods. fixes potential macro collision with isset(). thanks davilla + * don't change the active device when receiving stream path changed + messages. fixes wrong source selection when powering after the TV. - -- Pulse-Eight Packaging Sat, 12 Nov 2011 13:36:00 +0100 + -- Pulse-Eight Packaging Fri, 09 Dec 2011 12:16:00 +0100 libcec (1.2-1) unstable; urgency=low diff --git a/debian/changelog b/debian/changelog index 57b6228..ff89b35 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,87 @@ +libcec (1.4-1) unstable; urgency=low + + * changed/added: + * make libudev optional. if libudev is not available on linux, adapter + autodetection will also not be available. fixes compilation on Hardy/ATV1 + * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET + language + * added vendor support for LG + * added vendor support for Philips + * added vendor support for Yamaha + * added vendor support for Onkyo + * added 'scan' command to cec-client, that displays info about devices on + the bus. made all ToString() methods available on the interface. + * added '-s' or '--single-command' to cec-client. starting cec-client with + this parameter executes a single command in cec-client and does not power + on devices on startup and power them off on exit. this way, you can use + cec-client in a shell script. since there's some handshaking involved at + startup, this is not very fast. to execute a command and only display the + result and any error/warning, execute it with + RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch + files are a bit different) + * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to + cec-client's parameters + * handle image view on and text view on + * handle routing information and report physical address opcodes + * handle audio status updates + * send ping and bootloader commands via the output queue + * scan the CEC bus for devices when starting libcec + * pass all commands that are directed at libcec to listeners + * interface changes: + * added GetActiveSource()/cec_get_active_source() + * added IsActiveSource()/cec_is_active_source() + * added GetDevicePhysicalAddress()/cec_get_device_physical_address() + * added GetDeviceOSDName()/cec_get_osd_name() + * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/ + cec_send_key_release() + * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(), + MuteAudio()/cec_mute_audio() + * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/ + cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type(). + * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load + and when a device with the same physical address is detected, libcec will + use the selected hdmi port on that device. should fix source selection on + other devices, like an amplifier + * added a hook in libcec for physical address autodetection + * fixed: + * don't request the physical address from the tv (it's always 0x0000) + * set the proper ackmask before doing anything else + * don't unlock the transmit mutex in CCECProcessor while waiting for an + answer + * fix device polling + * refactor CEC read/write. keep a single lock for all writes, not one per + device + * ignore other data while waiting for a response + * retry failed tranmissions + * don't delete a message before it's been sent when starting the bootloader + * or when sending a ping + * fixed possible segfault when switching the command handler after a vendor + * id changed + * handle audio opcodes correctly + * inactive source should be directly addressed at the TV + * don't report a changed physical address when it hasn't changed + * routing information sets the stream path, not the physical address + * don't scan the whole bus in CCECProcessor::IsActiveDeviceType() + * don't request the vendor id from devices that are handled by libcec + * mark device status as present when a command was received from a device + * always send a power on command in CCECBusDevice::PowerOn() + * don't request updates statusses unless needed + * report physical address sends 3 parameters, not 2. check whether the + device type is correct + * devices can send vendor commands from other vendors, so don't assume the + device is of a certain vendor when it sends commands with a vendor id + * thread safety fixes. bugzid: 19 + * clear any previous input when opening a connection to the adapter. + bugzid: 54 + * use the correct source address in CSLCommandHandler::HandleVendorCommand() + * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5 + * renamed enum methods. fixes potential macro collision with isset(). + thanks davilla + * don't change the active device when receiving stream path changed + messages. fixes wrong source selection when powering after the TV. + + -- Pulse-Eight Packaging Fri, 09 Dec 2011 12:16:00 +0100 + libcec (1.2-1) unstable; urgency=low * bugfixes: