From: Lars Op den Kamp Date: Fri, 27 Apr 2012 10:17:00 +0000 (+0200) Subject: updated changelog for 1.6.2 X-Git-Tag: upstream/2.2.0~1^2~29^2^2~11 X-Git-Url: https://git.piment-noir.org/?a=commitdiff_plain;h=e736e6becbbd0db37145c7b8a52100456ffd095e;p=deb_libcec.git updated changelog for 1.6.2 --- diff --git a/ChangeLog b/ChangeLog index d3b160e..aad871a 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,91 @@ +libcec (1.6-3) unstable; urgency=low + + * changed/added: + * cec-client: show the firmware build date if available in cec-client -l + * cec-client: don't activate the source when starting + * cec-client: group up the output of the 'scan' command, and add the + currently active source to the output + * log the libCEC version in the 'connected to the CEC adapter' log entry, + and add the firmware build date to the line if it's available, so all + relevant version info is available in 1 log line. + * async writes for CUSBCECAdapterCommunication. less locks and polls, more + speed + * added 'make docs' target, that updates the doxygen documentation + + * interface changes: + * added operator == and != for libcec_configuration + * added GetResponseOpcode(cec_opcode opcode) to cec_command + * added the firmware build date to libcec_configuration, so it can be + displayed by the client too. + * added static CLibCEC::Alert() method and CEC_ALERT_CONNECTION_LOST value + * added a callback to handle menu state changes. if the callback method + returns 1, then the change is processed by the CCECBusDevice too. if 0, + then the CCECBusDevice will always have menu state 'activated', so + keypresses are routed. bugzid: 724 + * added a default menu language to libcec_configuration and set this + language for devices controlled by libcec. bugzid: 69 + + * fixed + * CCECProcessor::IsActiveSource() - TV was never checked + * don't call the deprecated SetActiveView() method in cec-client + * request the active source if unknown in CCECProcessor::GetActiveSource() + * don't try to match a device with PA 0xFFFF. + * don't change the power status of a device when changing the stream path + * don't set the power status to 'powered off' when marking the source + managed by libcec as inactive, or the tv will might send a power control + keycode when making it active again, potentially shutting down the system + * potential segfault in CCECProcessor::GetDeviceByPhysicalAddress() + * stream path changes when changed to the TV source (PA 0) + * clear the unsupported features list in CCECBusDevice::ResetDeviceStatus() + * never mark vendor commands as unsupported (only some may be unsupported), + as well as some others that should never be marked unsupported + * don't retry in CCECCommandHandler if the command has been marked as + unsupported + * don't request the PA of devices when handling an incoming CEC command, or + it'll block things while waiting for a response. if that response never + comes, or comes late, then other incoming commands will be timed out + before they are handled + * optimisation - strip unneeded virtual keywords from top level + implementations + * use the vlcommandhandler for the primary device that is handled by libCEC + when a panasonic tv is detected, so delayed activate source commands are + using the correct handler. bugzid: 723 + * set the power status of device controlled by libCEC to + CEC_POWER_STATUS_ON + instead of IN_TRANSITION_STANDBY_TO_ON. reset the device status of a + device if it was detected as removed. bugzid: 755 + * potentially uninitialised values in cec_command + * delay the 'active source' command for panasonic, until the vendor command + that reports that the TV is powered on has been received. bugzid: 723 + * only respond to Give Physical Address with Report Physical Address. + bugzid: 592 + This fixes several reports of the TV improperly switching to the libcec + device after it has previously switched to another source. Fix confirmed + with Panasonic and also reported to be an issue with Samsung and + Philips. + * check whether callback methods are set to a valid ptr + * number of retries for polls + * win32: fix build in paths with spaces. bugzid: 730 + * LibCecSharp: free the alert GC callback when cleaning up + * the wrong setting was being read when powering on devices + * close the connection when a comm error was detected, and notify the + client via an alert + * don't segfault when calling ThreadsWait() without a valid thread + * lib/platform: fixed memleak + * leak in CCECAdapterMessageQueue::Write + * don't send commands if we know them to be unsupported. bugzid: 725 + + -- Pulse-Eight Packaging Wed, 18 Apr 2012 11:30:00 +0100 + +libcec (1.6-2) unstable; urgency=low + + * fixed: + * fixed typo in CUSBCECAdapterCommands::RequestSettings() that prevented + the settings from being read. the settings were still written, but never + read when bGetSettingsFromROM = 1. + + -- Pulse-Eight Packaging Wed, 18 Apr 2012 11:30:00 +0100 + libcec (1.6-1) unstable; urgency=medium * changed/added: diff --git a/debian/changelog b/debian/changelog index a04a100..aad871a 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,82 @@ +libcec (1.6-3) unstable; urgency=low + + * changed/added: + * cec-client: show the firmware build date if available in cec-client -l + * cec-client: don't activate the source when starting + * cec-client: group up the output of the 'scan' command, and add the + currently active source to the output + * log the libCEC version in the 'connected to the CEC adapter' log entry, + and add the firmware build date to the line if it's available, so all + relevant version info is available in 1 log line. + * async writes for CUSBCECAdapterCommunication. less locks and polls, more + speed + * added 'make docs' target, that updates the doxygen documentation + + * interface changes: + * added operator == and != for libcec_configuration + * added GetResponseOpcode(cec_opcode opcode) to cec_command + * added the firmware build date to libcec_configuration, so it can be + displayed by the client too. + * added static CLibCEC::Alert() method and CEC_ALERT_CONNECTION_LOST value + * added a callback to handle menu state changes. if the callback method + returns 1, then the change is processed by the CCECBusDevice too. if 0, + then the CCECBusDevice will always have menu state 'activated', so + keypresses are routed. bugzid: 724 + * added a default menu language to libcec_configuration and set this + language for devices controlled by libcec. bugzid: 69 + + * fixed + * CCECProcessor::IsActiveSource() - TV was never checked + * don't call the deprecated SetActiveView() method in cec-client + * request the active source if unknown in CCECProcessor::GetActiveSource() + * don't try to match a device with PA 0xFFFF. + * don't change the power status of a device when changing the stream path + * don't set the power status to 'powered off' when marking the source + managed by libcec as inactive, or the tv will might send a power control + keycode when making it active again, potentially shutting down the system + * potential segfault in CCECProcessor::GetDeviceByPhysicalAddress() + * stream path changes when changed to the TV source (PA 0) + * clear the unsupported features list in CCECBusDevice::ResetDeviceStatus() + * never mark vendor commands as unsupported (only some may be unsupported), + as well as some others that should never be marked unsupported + * don't retry in CCECCommandHandler if the command has been marked as + unsupported + * don't request the PA of devices when handling an incoming CEC command, or + it'll block things while waiting for a response. if that response never + comes, or comes late, then other incoming commands will be timed out + before they are handled + * optimisation - strip unneeded virtual keywords from top level + implementations + * use the vlcommandhandler for the primary device that is handled by libCEC + when a panasonic tv is detected, so delayed activate source commands are + using the correct handler. bugzid: 723 + * set the power status of device controlled by libCEC to + CEC_POWER_STATUS_ON + instead of IN_TRANSITION_STANDBY_TO_ON. reset the device status of a + device if it was detected as removed. bugzid: 755 + * potentially uninitialised values in cec_command + * delay the 'active source' command for panasonic, until the vendor command + that reports that the TV is powered on has been received. bugzid: 723 + * only respond to Give Physical Address with Report Physical Address. + bugzid: 592 + This fixes several reports of the TV improperly switching to the libcec + device after it has previously switched to another source. Fix confirmed + with Panasonic and also reported to be an issue with Samsung and + Philips. + * check whether callback methods are set to a valid ptr + * number of retries for polls + * win32: fix build in paths with spaces. bugzid: 730 + * LibCecSharp: free the alert GC callback when cleaning up + * the wrong setting was being read when powering on devices + * close the connection when a comm error was detected, and notify the + client via an alert + * don't segfault when calling ThreadsWait() without a valid thread + * lib/platform: fixed memleak + * leak in CCECAdapterMessageQueue::Write + * don't send commands if we know them to be unsupported. bugzid: 725 + + -- Pulse-Eight Packaging Wed, 18 Apr 2012 11:30:00 +0100 + libcec (1.6-2) unstable; urgency=low * fixed: