deb_libcec.git
12 years agofixed typo in stop+pause combo key
Lars Op den Kamp [Thu, 25 Oct 2012 10:12:25 +0000 (12:12 +0200)] 
fixed typo in stop+pause combo key

12 years agofixed - don't respond with an abort message when receiving a vendor remote button...
Lars Op den Kamp [Thu, 25 Oct 2012 08:51:51 +0000 (10:51 +0200)] 
fixed - don't respond with an abort message when receiving a vendor remote button command

12 years agofixed - don't try to set controlled mode when using firmware version 1 and crash...
Lars Op den Kamp [Tue, 23 Oct 2012 13:28:53 +0000 (15:28 +0200)] 
fixed - don't try to set controlled mode when using firmware version 1 and crash. closes #76

12 years agoMerge pull request #73 from warped-rudi/Pulse-Eight
Lars Op den Kamp [Fri, 19 Oct 2012 08:01:22 +0000 (01:01 -0700)] 
Merge pull request #73 from warped-rudi/Pulse-Eight

Added adapter ID interface for NXP (CuBox)

12 years agoAdded adapter ID interface
warped-rudi [Fri, 19 Oct 2012 05:56:19 +0000 (07:56 +0200)] 
Added adapter ID interface

12 years agofixed - new combo key handling broke samsung's vendor specific remote buttons. github...
Lars Op den Kamp [Thu, 18 Oct 2012 14:45:54 +0000 (16:45 +0200)] 
fixed - new combo key handling broke samsung's vendor specific remote buttons. github issue #54

12 years agofixed handling of active route changes. github issue #56 and issue #58
Lars Op den Kamp [Thu, 18 Oct 2012 13:58:17 +0000 (15:58 +0200)] 
fixed handling of active route changes. github issue #56 and issue #58

12 years agoadded CCECDeviceMap::GetChildrenOf()
Lars Op den Kamp [Thu, 18 Oct 2012 13:50:07 +0000 (15:50 +0200)] 
added CCECDeviceMap::GetChildrenOf()

12 years agoadded CCECTypeUtils::PhysicalAddressIsIncluded()
Lars Op den Kamp [Thu, 18 Oct 2012 11:51:42 +0000 (13:51 +0200)] 
added CCECTypeUtils::PhysicalAddressIsIncluded()

12 years agoMerge branch 'master' into release
Lars Op den Kamp [Mon, 15 Oct 2012 15:27:38 +0000 (17:27 +0200)] 
Merge branch 'master' into release

12 years agoMerge branch 'development'. closes #67
Lars Op den Kamp [Mon, 15 Oct 2012 12:11:32 +0000 (14:11 +0200)] 
Merge branch 'development'. closes #67

12 years agofixed typo. closes #69
Lars Op den Kamp [Mon, 15 Oct 2012 12:08:21 +0000 (14:08 +0200)] 
fixed typo. closes #69

12 years agobumped version and updated changelog
Lars Op den Kamp [Mon, 15 Oct 2012 11:52:37 +0000 (13:52 +0200)] 
bumped version and updated changelog

12 years agoupdate the device status to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON after sendin...
Lars Op den Kamp [Mon, 15 Oct 2012 11:34:35 +0000 (13:34 +0200)] 
update the device status to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON after sending an image view on command and the status isn't 'on' yet

12 years agobit less bus and log spamming while waiting for the tv to power up
Lars Op den Kamp [Mon, 15 Oct 2012 11:26:45 +0000 (13:26 +0200)] 
bit less bus and log spamming while waiting for the tv to power up

12 years agofixed - reset CVLCommandHandler::m_bCapabilitiesSent when the TV goes to standby
Lars Op den Kamp [Mon, 15 Oct 2012 11:03:26 +0000 (13:03 +0200)] 
fixed - reset CVLCommandHandler::m_bCapabilitiesSent when the TV goes to standby

12 years agofixed - don't keep spamming the bus with a vendor command when an active source switc...
Lars Op den Kamp [Mon, 15 Oct 2012 11:02:09 +0000 (13:02 +0200)] 
fixed - don't keep spamming the bus with a vendor command when an active source switch is pending for panasonic, but only send it when needed

12 years agoless debug logging by default
Lars Op den Kamp [Mon, 15 Oct 2012 10:15:23 +0000 (12:15 +0200)] 
less debug logging by default

12 years agofixed - updating the device status after a poll was broken and could reset the status...
Lars Op den Kamp [Mon, 15 Oct 2012 10:13:09 +0000 (12:13 +0200)] 
fixed - updating the device status after a poll was broken and could reset the status of devices that were marked as handled by libCEC to 'not present'

12 years agoMerge branch 'master' into release
Lars Op den Kamp [Thu, 11 Oct 2012 15:14:12 +0000 (17:14 +0200)] 
Merge branch 'master' into release

12 years agoMerge branch 'development'
Lars Op den Kamp [Thu, 11 Oct 2012 14:55:12 +0000 (16:55 +0200)] 
Merge branch 'development'

12 years agobump to 2.0.1 and updated changelog
Lars Op den Kamp [Thu, 11 Oct 2012 13:48:52 +0000 (15:48 +0200)] 
bump to 2.0.1 and updated changelog

12 years agolog what we received exactly when logging FIXME
Lars Op den Kamp [Thu, 11 Oct 2012 13:25:27 +0000 (15:25 +0200)] 
log what we received exactly when logging FIXME

12 years agofixed - typo in CVLCommandHandler::VendorPreActivateSourceHook. bugzid: 1087
Lars Op den Kamp [Thu, 11 Oct 2012 13:13:53 +0000 (15:13 +0200)] 
fixed - typo in CVLCommandHandler::VendorPreActivateSourceHook. bugzid: 1087

12 years agofixed - if we failed to get the physical address of the device that we are connected...
Lars Op den Kamp [Thu, 11 Oct 2012 12:58:53 +0000 (14:58 +0200)] 
fixed - if we failed to get the physical address of the device that we are connected to in the config, then try to use the address that was persisted in the eeprom before resetting to the default value, 1.0.0.0. closes #50.

12 years agofixed - don't update the device status of unregistered/broadcast
Lars Op den Kamp [Thu, 11 Oct 2012 12:41:57 +0000 (14:41 +0200)] 
fixed - don't update the device status of unregistered/broadcast

12 years agofixed - log all device status changes
Lars Op den Kamp [Thu, 11 Oct 2012 12:34:43 +0000 (14:34 +0200)] 
fixed - log all device status changes

12 years agolower retry timeout for source switches
Lars Op den Kamp [Thu, 11 Oct 2012 12:14:58 +0000 (14:14 +0200)] 
lower retry timeout for source switches

12 years agocec-client: fixed - wait for the source switch to finish when cec-client is called...
Lars Op den Kamp [Thu, 11 Oct 2012 12:13:22 +0000 (14:13 +0200)] 
cec-client: fixed - wait for the source switch to finish when cec-client is called with the -s switch

12 years agofixed - CCECClient::IsLibCECActiveSource returns false now while the active source...
Lars Op den Kamp [Thu, 11 Oct 2012 12:12:25 +0000 (14:12 +0200)] 
fixed - CCECClient::IsLibCECActiveSource returns false now while the active source command is pending

12 years agofixed - log failed acks and other errors in the debug log again
Lars Op den Kamp [Thu, 11 Oct 2012 12:02:21 +0000 (14:02 +0200)] 
fixed - log failed acks and other errors in the debug log again

12 years agorequest the power status of the TV directly after registering a new client
Lars Op den Kamp [Thu, 11 Oct 2012 11:21:09 +0000 (13:21 +0200)] 
request the power status of the TV directly after registering a new client

12 years agofixed - don't send 'image view on' when the TV is already powering up
Lars Op den Kamp [Thu, 11 Oct 2012 11:19:40 +0000 (13:19 +0200)] 
fixed - don't send 'image view on' when the TV is already powering up

12 years agofixed - don't keep waiting for an updated power status from the TV for Panasonic...
Lars Op den Kamp [Thu, 11 Oct 2012 11:19:04 +0000 (13:19 +0200)] 
fixed - don't keep waiting for an updated power status from the TV for Panasonic, but request a status update once every 5 seconds, or we can possibly wait forever for the tv to send it

12 years agofixed - reset the delayed source switch timeout properly, so we don't spam commands...
Lars Op den Kamp [Thu, 11 Oct 2012 10:59:15 +0000 (12:59 +0200)] 
fixed - reset the delayed source switch timeout properly, so we don't spam commands every second

12 years agofixed - don't change the device status when sending a delayed source switch
Lars Op den Kamp [Thu, 11 Oct 2012 10:56:56 +0000 (12:56 +0200)] 
fixed - don't change the device status when sending a delayed source switch

12 years agodon't send out commands to a device that is marked as not present or handled by libCEC
Lars Op den Kamp [Thu, 11 Oct 2012 10:51:29 +0000 (12:51 +0200)] 
don't send out commands to a device that is marked as not present or handled by libCEC

12 years agofixed - don't keep trying to send 'image view on' commands to the TV when no TV is...
Lars Op den Kamp [Thu, 11 Oct 2012 10:41:26 +0000 (12:41 +0200)] 
fixed - don't keep trying to send 'image view on' commands to the TV when no TV is connected, and just send the 'set active source' command. fixes source switch and debug log spam for people without a TV connected

12 years agoMerge branch 'development' into release
Lars Op den Kamp [Tue, 9 Oct 2012 11:17:25 +0000 (13:17 +0200)] 
Merge branch 'development' into release

12 years agoMerge pull request #62 from Fneufneu/freebsd_fix
Lars Op den Kamp [Tue, 9 Oct 2012 11:14:32 +0000 (04:14 -0700)] 
Merge pull request #62 from Fneufneu/freebsd_fix

[FreeBSD] fix unused strDevicePath variable

12 years agofixed darwin compilation
Lars Op den Kamp [Tue, 9 Oct 2012 11:05:29 +0000 (13:05 +0200)] 
fixed darwin compilation

12 years ago[FreeBSD] fix unused strDevicePath variable
Fneufneu [Tue, 9 Oct 2012 09:43:18 +0000 (11:43 +0200)] 
[FreeBSD] fix unused strDevicePath variable

12 years agoMerge branch 'master' into release
Lars Op den Kamp [Mon, 8 Oct 2012 23:06:56 +0000 (01:06 +0200)] 
Merge branch 'master' into release

12 years agoMerge branch 'development'
Lars Op den Kamp [Mon, 8 Oct 2012 19:32:06 +0000 (21:32 +0200)] 
Merge branch 'development'

12 years agoupdated changelog
Lars Op den Kamp [Mon, 8 Oct 2012 19:31:05 +0000 (21:31 +0200)] 
updated changelog

12 years agoMerge remote-tracking branch 'warped-rudi/cubox-stable' into development. Closes #50
Lars Op den Kamp [Mon, 8 Oct 2012 18:24:03 +0000 (20:24 +0200)] 
Merge remote-tracking branch 'warped-rudi/cubox-stable' into development. Closes #50

12 years agodon't get caught in a loop in CVLCommandHandler when the source switch was not allowe...
Lars Op den Kamp [Mon, 8 Oct 2012 16:14:05 +0000 (18:14 +0200)] 
don't get caught in a loop in CVLCommandHandler when the source switch was not allowed and no power status request was sent

12 years agofixed - always send image view on to the tv, don't check the power status
Lars Op den Kamp [Mon, 8 Oct 2012 15:37:58 +0000 (17:37 +0200)] 
fixed - always send image view on to the tv, don't check the power status

12 years agoadded iDoubleTapTimeoutMs to libcec_configuration
Lars Op den Kamp [Mon, 8 Oct 2012 13:54:28 +0000 (15:54 +0200)] 
added iDoubleTapTimeoutMs to libcec_configuration

12 years agofixed - only respond to vendor commands for panasonic if we are the destination
Lars Op den Kamp [Mon, 8 Oct 2012 12:19:31 +0000 (14:19 +0200)] 
fixed - only respond to vendor commands for panasonic if we are the destination

12 years agoremove all pre-v2.0 compatibility checks
Lars Op den Kamp [Mon, 8 Oct 2012 12:12:38 +0000 (14:12 +0200)] 
remove all pre-v2.0 compatibility checks

12 years agocosmetics: format physical address as %x.%x.%x.%x instead of %04x
Lars Op den Kamp [Mon, 8 Oct 2012 11:50:33 +0000 (13:50 +0200)] 
cosmetics: format physical address as %x.%x.%x.%x instead of %04x

12 years agoupdated .gitignore
Lars Op den Kamp [Sun, 7 Oct 2012 23:09:41 +0000 (01:09 +0200)] 
updated .gitignore

12 years agocompile with -Werror
Lars Op den Kamp [Sun, 7 Oct 2012 22:20:44 +0000 (00:20 +0200)] 
compile with -Werror

12 years agoreplaced previous libcec1 packages
Lars Op den Kamp [Sun, 7 Oct 2012 22:14:53 +0000 (00:14 +0200)] 
replaced previous libcec1 packages

12 years agosilence signed overflow warning
Lars Op den Kamp [Sun, 7 Oct 2012 22:13:48 +0000 (00:13 +0200)] 
silence signed overflow warning

12 years agosync StdString.h
Lars Op den Kamp [Sun, 7 Oct 2012 22:06:08 +0000 (00:06 +0200)] 
sync StdString.h

12 years agofixed typo that disabled the start application button in the ui
Lars Op den Kamp [Sun, 7 Oct 2012 19:05:26 +0000 (21:05 +0200)] 
fixed typo that disabled the start application button in the ui

12 years agoadded new settings from xbmc to LibCecTray
Lars Op den Kamp [Sun, 7 Oct 2012 19:02:02 +0000 (21:02 +0200)] 
added new settings from xbmc to LibCecTray

12 years agoupdated changelog
Lars Op den Kamp [Sun, 7 Oct 2012 16:54:05 +0000 (18:54 +0200)] 
updated changelog

12 years agofixed - no more delay up to 2 seconds when exiting libCEC
Lars Op den Kamp [Sun, 7 Oct 2012 15:08:42 +0000 (17:08 +0200)] 
fixed - no more delay up to 2 seconds when exiting libCEC

12 years agofall back to the primary client when CCECProcessor::HandleLogicalAddressLost() and...
Lars Op den Kamp [Sun, 7 Oct 2012 13:10:12 +0000 (15:10 +0200)] 
fall back to the primary client when CCECProcessor::HandleLogicalAddressLost() and no client could be found

12 years agorpi: current firmware first sends a change to logical address 'broadcast' and then...
Lars Op den Kamp [Sun, 7 Oct 2012 12:20:23 +0000 (14:20 +0200)] 
rpi: current firmware first sends a change to logical address 'broadcast' and then signals us that the address was lost. libCEC then failed to re-register, because it didn't know any client at this address

12 years agoprevent double taps by not sending the same key press twice within 200ms
Lars Op den Kamp [Sun, 7 Oct 2012 10:07:47 +0000 (12:07 +0200)] 
prevent double taps by not sending the same key press twice within 200ms

12 years agochanged some log levels from NOTICE to DEBUG, so the non-debugging output is less...
Lars Op den Kamp [Sun, 7 Oct 2012 09:37:38 +0000 (11:37 +0200)] 
changed some log levels from NOTICE to DEBUG, so the non-debugging output is less spammy

12 years agofixed return values of cec_get_adapter_vendor_id() and cec_get_adapter_product_id()
Lars Op den Kamp [Sun, 7 Oct 2012 09:29:35 +0000 (11:29 +0200)] 
fixed return values of cec_get_adapter_vendor_id() and cec_get_adapter_product_id()

12 years agoexit LibCecTray when we detect that XBMC was started
Lars Op den Kamp [Sun, 7 Oct 2012 00:46:26 +0000 (02:46 +0200)] 
exit LibCecTray when we detect that XBMC was started

12 years agofixed duplicate entry and entry for 'unknown' in the button config list
Lars Op den Kamp [Sat, 6 Oct 2012 18:56:41 +0000 (20:56 +0200)] 
fixed duplicate entry and entry for 'unknown' in the button config list

12 years agofixed - show/hide toggle when hiding the app via the taskbar
Lars Op den Kamp [Sat, 6 Oct 2012 18:44:14 +0000 (20:44 +0200)] 
fixed - show/hide toggle when hiding the app via the taskbar

12 years agostore inactive source setting
Lars Op den Kamp [Sat, 6 Oct 2012 18:39:41 +0000 (20:39 +0200)] 
store inactive source setting

12 years agosave the correct xml file in LibCecTray, so XBMC picks up the correct config
Lars Op den Kamp [Sat, 6 Oct 2012 15:55:23 +0000 (17:55 +0200)] 
save the correct xml file in LibCecTray, so XBMC picks up the correct config

12 years agoadded GetAdapterProductId()+GetAdapterVendorId()/cec_get_adapter_product_id()+cec_get...
Lars Op den Kamp [Sat, 6 Oct 2012 12:39:07 +0000 (14:39 +0200)] 
added GetAdapterProductId()+GetAdapterVendorId()/cec_get_adapter_product_id()+cec_get_adapter_vendor_id()

12 years agoload and save the 2548:1002 config for XBMC too. try to create the profile directory...
Lars Op den Kamp [Sat, 6 Oct 2012 12:12:45 +0000 (14:12 +0200)] 
load and save the 2548:1002 config for XBMC too. try to create the profile directory if the tray tool was started before starting XBMC for the first time

12 years agodisable configure buttons for apps that can't be configured
Lars Op den Kamp [Sat, 6 Oct 2012 11:00:18 +0000 (13:00 +0200)] 
disable configure buttons for apps that can't be configured

12 years agodon't autostart applications
Lars Op den Kamp [Sat, 6 Oct 2012 10:55:53 +0000 (12:55 +0200)] 
don't autostart applications

12 years agoremoved old icon from the project file
Lars Op den Kamp [Sat, 6 Oct 2012 10:55:39 +0000 (12:55 +0200)] 
removed old icon from the project file

12 years agolet the installer uninstall previous beta installations of libCEC Tray, and remove...
Lars Op den Kamp [Sat, 6 Oct 2012 09:28:42 +0000 (11:28 +0200)] 
let the installer uninstall previous beta installations of libCEC Tray, and remove cec-config-gui.exe when installing

12 years agoreplaced cec-config-gui by libCEC tray
Lars Op den Kamp [Sat, 6 Oct 2012 01:17:34 +0000 (03:17 +0200)] 
replaced cec-config-gui by libCEC tray

12 years agotypo
Lars Op den Kamp [Wed, 3 Oct 2012 16:41:59 +0000 (18:41 +0200)] 
typo

12 years agobump client versions
Lars Op den Kamp [Wed, 3 Oct 2012 15:59:21 +0000 (17:59 +0200)] 
bump client versions

12 years agodon't log every frame, unless debugging was enabled in ./configure or visual studio
Lars Op den Kamp [Wed, 3 Oct 2012 15:54:56 +0000 (17:54 +0200)] 
don't log every frame, unless debugging was enabled in ./configure or visual studio

12 years agofixed - message response signaling and logging
Lars Op den Kamp [Wed, 3 Oct 2012 15:33:58 +0000 (17:33 +0200)] 
fixed - message response signaling and logging

12 years agoupdated changelog
Lars Op den Kamp [Wed, 3 Oct 2012 14:49:57 +0000 (16:49 +0200)] 
updated changelog

12 years agolog the exact data for failed transmissions, not the opcode
Lars Op den Kamp [Wed, 3 Oct 2012 14:32:52 +0000 (16:32 +0200)] 
log the exact data for failed transmissions, not the opcode

12 years agoprevent sending directly addressed commands from being sent to broadcast
Lars Op den Kamp [Wed, 3 Oct 2012 14:28:09 +0000 (16:28 +0200)] 
prevent sending directly addressed commands from being sent to broadcast

12 years agofixed - don't wait for a response when sending a reply, so we don't block message...
Lars Op den Kamp [Wed, 3 Oct 2012 13:11:20 +0000 (15:11 +0200)] 
fixed - don't wait for a response when sending a reply, so we don't block message handling

12 years agoremoved unused maxTries from CCECAdapterMessage
Lars Op den Kamp [Wed, 3 Oct 2012 12:52:45 +0000 (14:52 +0200)] 
removed unused maxTries from CCECAdapterMessage

12 years agofixed - some messages from the adapter were marked as response while they weren't
Lars Op den Kamp [Wed, 3 Oct 2012 11:57:10 +0000 (13:57 +0200)] 
fixed - some messages from the adapter were marked as response while they weren't

12 years agosync LibCecSharp
Lars Op den Kamp [Wed, 3 Oct 2012 08:41:25 +0000 (10:41 +0200)] 
sync LibCecSharp

12 years agoupdated debian package files
Lars Op den Kamp [Tue, 2 Oct 2012 23:28:02 +0000 (01:28 +0200)] 
updated debian package files

12 years agobump to v2.0.0
Lars Op den Kamp [Tue, 2 Oct 2012 23:01:48 +0000 (01:01 +0200)] 
bump to v2.0.0

12 years agoenable silent rules by default
Lars Op den Kamp [Tue, 2 Oct 2012 22:43:30 +0000 (00:43 +0200)] 
enable silent rules by default

12 years agobump so version
Lars Op den Kamp [Tue, 2 Oct 2012 22:41:16 +0000 (00:41 +0200)] 
bump so version

12 years agoupdated documentation, bumped version number defines
Lars Op den Kamp [Tue, 2 Oct 2012 22:40:35 +0000 (00:40 +0200)] 
updated documentation, bumped version number defines

12 years agoupdate client applications
Lars Op den Kamp [Tue, 2 Oct 2012 22:40:10 +0000 (00:40 +0200)] 
update client applications

12 years agoremoved deref from callback method params. fixes C compilation. breaking API change
Lars Op den Kamp [Tue, 2 Oct 2012 22:18:22 +0000 (00:18 +0200)] 
removed deref from callback method params. fixes C compilation. breaking API change

12 years agoremoved deprecated constructor. cosmetics
Lars Op den Kamp [Tue, 2 Oct 2012 22:01:10 +0000 (00:01 +0200)] 
removed deprecated constructor. cosmetics

12 years agobump to v2.0.0-pre. don't build cec-config.exe on windows (there's a gui version)
Lars Op den Kamp [Tue, 2 Oct 2012 11:59:46 +0000 (13:59 +0200)] 
bump to v2.0.0-pre. don't build cec-config.exe on windows (there's a gui version)

12 years agomore missing docs
Lars Op den Kamp [Tue, 2 Oct 2012 11:07:09 +0000 (13:07 +0200)] 
more missing docs

12 years agoadded more documentation
Lars Op den Kamp [Tue, 2 Oct 2012 10:24:42 +0000 (12:24 +0200)] 
added more documentation