panasonic: silence 'unmapped code' warning. bugzid: 2375

[deb_libcec.git] / src / lib / implementations / VLCommandHandler.cpp

diff --git a/src/lib/implementations/VLCommandHandler.cpp b/src/lib/implementations/VLCommandHandler.cpp
index 00e062bc8c3920096dbf6abca8a1dfd424058797..907de02dda786e69892d4419613bb619cbc00e6e 100644 (file)
--- a/src/lib/implementations/VLCommandHandler.cpp
+++ b/src/lib/implementations/VLCommandHandler.cpp
@@ -1,7 +1,7 @@
 /*
  * This file is part of the libCEC(R) library.
  *
- * libCEC(R) is Copyright (C) 2011-2012 Pulse-Eight Limited.  All rights reserved.
+ * libCEC(R) is Copyright (C) 2011-2013 Pulse-Eight Limited.  All rights reserved.
  * libCEC(R) is an original work, containing original code.
  *
  * libCEC(R) is a trademark of Pulse-Eight Limited.
@@ -61,8 +61,7 @@ CVLCommandHandler::CVLCommandHandler(CCECBusDevice *busDevice,
                                      int64_t iActiveSourcePending /* = 0 */) :
     CCECCommandHandler(busDevice, iTransmitTimeout, iTransmitWait, iTransmitRetries, iActiveSourcePending),
     m_iPowerUpEventReceived(0),
-    m_bCapabilitiesSent(false),
-    m_bPowerStatusRequested(false)
+    m_bCapabilitiesSent(false)
 {
   m_vendorId = CEC_VENDOR_PANASONIC;
 }
@@ -77,13 +76,21 @@ bool CVLCommandHandler::InitHandler(void)
     {
       if (primary && m_busDevice->GetLogicalAddress() != primary->GetLogicalAddress())
       {
+        libcec_configuration config;
+        m_processor->GetPrimaryClient()->GetCurrentConfiguration(config);
+        if (config.iDoubleTapTimeoutMs == 0)
+        {
+          config.iDoubleTapTimeoutMs = CEC_DOUBLE_TAP_TIMEOUT_MS;
+          m_processor->GetPrimaryClient()->SetConfiguration(config);
+        }
+
         primary->SetVendorId(CEC_VENDOR_PANASONIC);
         primary->ReplaceHandler(false);
       }
-    }
 
-    if (primary->GetType() == CEC_DEVICE_TYPE_RECORDING_DEVICE)
-      return m_processor->GetPrimaryClient()->ChangeDeviceType(CEC_DEVICE_TYPE_RECORDING_DEVICE, CEC_DEVICE_TYPE_PLAYBACK_DEVICE);
+      if (primary->GetType() == CEC_DEVICE_TYPE_RECORDING_DEVICE)
+        return m_processor->GetPrimaryClient()->ChangeDeviceType(CEC_DEVICE_TYPE_RECORDING_DEVICE, CEC_DEVICE_TYPE_PLAYBACK_DEVICE);
+    }
   }
 
   return CCECCommandHandler::InitHandler();
@@ -99,11 +106,12 @@ int CVLCommandHandler::HandleDeviceVendorCommandWithId(const cec_command &comman
       command.parameters[2] != 0x45)
     return CEC_ABORT_REASON_INVALID_OPERAND;
 
-  // XXX this is also sent when the TV is powered off
-#if 0
   if (command.initiator == CECDEVICE_TV &&
       command.parameters.At(3) == VL_UNKNOWN1)
   {
+    // XXX this is also sent when the TV is powered off
+    // TODO power up sends 06:05. check whether this is also sent on power off
+#if 0
     // set the power up event time
     {
       CLockObject lock(m_mutex);
@@ -112,10 +120,10 @@ int CVLCommandHandler::HandleDeviceVendorCommandWithId(const cec_command &comman
     }
     // mark the TV as powered on
     m_processor->GetTV()->SetPowerStatus(CEC_POWER_STATUS_ON);
-  }
-  else
 #endif
-    if (command.initiator == CECDEVICE_TV &&
+    return COMMAND_HANDLED;
+  }
+  else if (command.initiator == CECDEVICE_TV &&
       command.destination == CECDEVICE_BROADCAST &&
       command.parameters.At(3) == VL_POWER_CHANGE)
   {
@@ -201,6 +209,7 @@ int CVLCommandHandler::HandleStandby(const cec_command &command)
   {
     CLockObject lock(m_mutex);
     m_iPowerUpEventReceived = 0;
+    m_bCapabilitiesSent = false;
   }
 
   return CCECCommandHandler::HandleStandby(command);
@@ -211,7 +220,7 @@ void CVLCommandHandler::VendorPreActivateSourceHook(void)
   bool bTransmit(false);
   {
     CLockObject lock(m_mutex);
-    bTransmit = m_bCapabilitiesSent;
+    bTransmit = !m_bCapabilitiesSent;
   }
   if (bTransmit)
     SendVendorCommandCapabilities(m_processor->GetLogicalAddress(), CECDEVICE_TV);
@@ -219,14 +228,14 @@ void CVLCommandHandler::VendorPreActivateSourceHook(void)
 
 void CVLCommandHandler::SendVendorCommandCapabilities(const cec_logical_address initiator, const cec_logical_address destination)
 {
-  cec_command response;
-  cec_command::Format(response, initiator, destination, CEC_OPCODE_VENDOR_COMMAND);
-  uint8_t iResponseData[] = {0x10, 0x02, 0xFF, 0xFF, 0x00, 0x05, 0x05, 0x45, 0x55, 0x5c, 0x58, 0x32};
-  response.PushArray(12, iResponseData);
-
-  if (Transmit(response, false, true))
+  if (PowerUpEventReceived())
   {
-    if (PowerUpEventReceived())
+    cec_command response;
+    cec_command::Format(response, initiator, destination, CEC_OPCODE_VENDOR_COMMAND);
+    uint8_t iResponseData[] = {0x10, 0x02, 0xFF, 0xFF, 0x00, 0x05, 0x05, 0x45, 0x55, 0x5c, 0x58, 0x32};
+    response.PushArray(12, iResponseData);
+
+    if (Transmit(response, false, true))
     {
       CLockObject lock(m_mutex);
       m_bCapabilitiesSent = true;
@@ -250,15 +259,9 @@ int CVLCommandHandler::HandleVendorCommand(const cec_command &command)
   return CEC_ABORT_REASON_INVALID_OPERAND;
 }
 
-bool CVLCommandHandler::TransmitRequestPowerStatus(const cec_logical_address iInitiator, const cec_logical_address iDestination, bool bWaitForResponse /* = true */)
-{
-  m_bPowerStatusRequested = true;
-  return CCECCommandHandler::TransmitRequestPowerStatus(iInitiator, iDestination, bWaitForResponse);
-}
-
 bool CVLCommandHandler::SourceSwitchAllowed(void)
 {
-  if (!PowerUpEventReceived() && !m_bPowerStatusRequested)
+  if (!PowerUpEventReceived())
     TransmitRequestPowerStatus(m_processor->GetPrimaryDevice()->GetLogicalAddress(), CECDEVICE_TV, false);
 
   return PowerUpEventReceived();