From: Lars Op den Kamp <lars@opdenkamp.eu>
Date: Wed, 5 Sep 2012 15:05:42 +0000 (+0200)
Subject: removed support/cec-flash-device.sh
X-Git-Tag: upstream/2.2.0~1^2~18^2^2~2
X-Git-Url: https://git.piment-noir.org/?p=deb_libcec.git;a=commitdiff_plain;h=356bb55b3bf8b52fb8bc5b12b732e61fd95f6676

removed support/cec-flash-device.sh
---

diff --git a/support/cec-flash-device.sh b/support/cec-flash-device.sh
deleted file mode 100755
index 10715cb..0000000
--- a/support/cec-flash-device.sh
+++ /dev/null
@@ -1,120 +0,0 @@
-#!/bin/bash
-
-_usage()
-{
-  echo "Usage: $0 /path/to/firmware.hex"
-}
-
-_check_bootloader_device()
-{
-  cec_adapter=`lsusb  | grep "03eb:2ffa" | wc -l`
-  if [ $cec_adapter -eq 0 ]; then
-    _enter_bootloader
-    cec_adapter=`lsusb  | grep "03eb:2ffa" | wc -l`
-  fi
-
-  if [ $cec_adapter -eq 0 ]; then
-    echo "ERROR: failed to find any CEC adapter in bootloader mode"
-    return 1
-  fi
-
-  return 0
-}
-
-_enter_bootloader()
-{
-  echo "Instructing the CEC adapter to enter bootloader mode"
-  cec_adapter=`lsusb  | grep "2548:1001" | wc -l`
-  if [ $cec_adapter -gt 0 ]; then
-    echo "bl" | cec-client --bootloader
-    echo "Waiting for the device to reinitialise"
-    sleep 5
-  fi
-}
-
-_flash()
-{
-  file=$1
-
-  if [ ! -f "$file" ]; then
-    echo "ERROR: firmware file '$file' does not exist"
-    exit 1
-  fi
-
-  cat << EOB
-Flash '$file' onto the CEC adapter
-
-DISCONNECT THE HDMI CABLES BEFORE STARTING AND
-DO NOT POWER OFF OR DISCONNECT THE DEVICE WHILE THIS OPERATION IS IN PROGRESS!
-
-
-Are you sure you want to flash '$file' onto the CEC adapter?
-Type 'do it!' if you're sure. Anything else will cancel the operation.
-
-EOB
-  read confirmation
-  if [ ! "$confirmation" == "do it!" ]; then
-    echo "Exiting"
-    exit 0
-  fi
-
-  _prereq
-  if [ $? -eq 1 ]; then
-    exit 1
-  fi
-
-  _check_bootloader_device
-  if [ $? -eq 1 ]; then
-    exit 1
-  fi
-
-
-  echo "Erasing the previous firmware"
-  sudo dfu-programmer at90usb162 erase
-
-  echo "Flashing the new firmware"
-  sudo dfu-programmer at90usb162 flash "$file"
-
-  cat << EOB
-
-===============================================================================
-
-Done!
-
-Remove the USB cable from the device and reconnect it to use the new firmware.
-
-EOB
-  exit 0
-}
-
-_prereq()
-{
-  programmer=`which dfu-programmer`
-  if [ -z "$programmer" ]; then
-    echo "dfu-programmer was not found in your path, installing"
-    sudo apt-get install -y dfu-programmer
-  fi
-
-  programmer=`which dfu-programmer`
-  if [ -z "$programmer" ]; then
-    echo "ERROR: failed to find dfu-programmer"
-    return 1
-  fi
-  return 0
-}
-
-
-cat << EOB
-===============================================================================
-              Pulse-Eight CEC Adapter firmware flash tool
-===============================================================================
-
-EOB
-
-if [ -z "$1" ]; then
-  _usage
-else
-  _flash $1
-fi
-
-exit 0