From fe462cdd03ae6f4135af0ae4fc7433113112ead1 Mon Sep 17 00:00:00 2001 From: Lars Op den Kamp Date: Fri, 16 Mar 2012 10:16:47 +0100 Subject: [PATCH] bumped version numbers to 1.5.3 and updated changelogs --- ChangeLog | 42 ++++++++++++++++++ debian/changelog | 42 ++++++++++++++++++ project/cec-config.rc | Bin 3232 -> 3232 bytes project/libcec.rc | Bin 3202 -> 3202 bytes project/testclient.rc | Bin 3230 -> 3230 bytes src/CecSharpTester/Properties/AssemblyInfo.cs | 4 +- src/LibCecSharp/AssemblyInfo.cpp | 2 +- src/cec-config-gui/Properties/AssemblyInfo.cs | 4 +- 8 files changed, 89 insertions(+), 5 deletions(-) diff --git a/ChangeLog b/ChangeLog index 15d5a73..f915c1f 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,45 @@ +libcec (1.5-4) unstable; urgency=low + + * changed/added: + * OS-X installation requirements and pointer + * full v2 firmware support: + * ping the adapter every 15 seconds. bugzid: 541 + * added v2 msgcodes. bugzid: 543 + * implemented the write methods for the v2 configuration. bugzid: 543 + * included the logical addresses in the persisted configuration for v2. + bugzid: 543 + * persist the configuration before closing the connection. only try to + persist the configuration when talking to a v2 firmware. bugzid: 543 + * added GetSetting() to CUSBCECAdapterCommunication. bugzid: 543 + * read the persisted settings from the ROM, and update it in + libcec_configuration if found. bugzid: 543 + * cec-client: set bGetSettingsFromROM to 1 in cec-client. bugzid: 543 + * cec-client: only read persisted EEPROM settings when -r or --rom is + provided as cmdline arg. bugzid: 543 + * call SetControlledMode(false) as last command when closing the + connection in v2. bugzid: 542 + * initial FreeBSD support: simply try to use ttyU* + + * fixed: + * set controlled mode and retry to send the previous command if it failed + with MSGCODE_COMMAND_REJECTED + * m_iLineTimeout was never initialised and used. fixes MSGCODE_REJECTED + when transmitting a message and incorrect line timeouts being used + * mac configure compile bugzid: 157 + * cec-config-gui: fixed application exit when the user clicked 'no' when + asked to reconnect. bugzid: 556 + * only wait for multiple 'command accepted' response when sending a + transmit command, and only to 1 in other cases. bugzid: 543 + * set the correct logical address mask before switching to autonomous mode. + bugzid: 543 + * re-added SetLineTimeout(). bugzid: 543 + * CUSBCECAdapterCommunication::SetControlledMode checked for the wrong sent + state + * os-x: don't add 0.5 before dividing in GetTimeMs() + * os-x: struct timespec now values weren't set correctly + + -- Pulse-Eight Packaging Fri, 16 Mar 2012 10:12:00 +0100 + libcec (1.5-3) unstable; urgency=low * fixed: diff --git a/debian/changelog b/debian/changelog index 15d5a73..f915c1f 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,45 @@ +libcec (1.5-4) unstable; urgency=low + + * changed/added: + * OS-X installation requirements and pointer + * full v2 firmware support: + * ping the adapter every 15 seconds. bugzid: 541 + * added v2 msgcodes. bugzid: 543 + * implemented the write methods for the v2 configuration. bugzid: 543 + * included the logical addresses in the persisted configuration for v2. + bugzid: 543 + * persist the configuration before closing the connection. only try to + persist the configuration when talking to a v2 firmware. bugzid: 543 + * added GetSetting() to CUSBCECAdapterCommunication. bugzid: 543 + * read the persisted settings from the ROM, and update it in + libcec_configuration if found. bugzid: 543 + * cec-client: set bGetSettingsFromROM to 1 in cec-client. bugzid: 543 + * cec-client: only read persisted EEPROM settings when -r or --rom is + provided as cmdline arg. bugzid: 543 + * call SetControlledMode(false) as last command when closing the + connection in v2. bugzid: 542 + * initial FreeBSD support: simply try to use ttyU* + + * fixed: + * set controlled mode and retry to send the previous command if it failed + with MSGCODE_COMMAND_REJECTED + * m_iLineTimeout was never initialised and used. fixes MSGCODE_REJECTED + when transmitting a message and incorrect line timeouts being used + * mac configure compile bugzid: 157 + * cec-config-gui: fixed application exit when the user clicked 'no' when + asked to reconnect. bugzid: 556 + * only wait for multiple 'command accepted' response when sending a + transmit command, and only to 1 in other cases. bugzid: 543 + * set the correct logical address mask before switching to autonomous mode. + bugzid: 543 + * re-added SetLineTimeout(). bugzid: 543 + * CUSBCECAdapterCommunication::SetControlledMode checked for the wrong sent + state + * os-x: don't add 0.5 before dividing in GetTimeMs() + * os-x: struct timespec now values weren't set correctly + + -- Pulse-Eight Packaging Fri, 16 Mar 2012 10:12:00 +0100 + libcec (1.5-3) unstable; urgency=low * fixed: diff --git a/project/cec-config.rc b/project/cec-config.rc index 180f4f050acf9882a287d1144d293a21bf783876..af72f98f1768cf80a596ae12ef24a24082f35257 100644 GIT binary patch delta 48 zcmZ1=xj=G*A2XxzWPfHuM&r$m%-lfE=3X{WCT3#>y~*;dl9O3Dg(k1#h2y<=nsawp5PN=|;pA+-4! H#~fw=XaNp> delta 52 zcmZpYY?9pI$INIn*`L{v(P(ocvp6%W5rZCs!Q_SPx|>h2y<=nsawp5PN=|;pA+-4! H#~fw=XMhfR diff --git a/project/testclient.rc b/project/testclient.rc index 15edfb5a5f2080c5845050e16f3992e72fee829d..92db5948b0a81fc7bbd080b1682021d2c2d34893 100644 GIT binary patch delta 50 zcmbOyIZtwfA2XxzWPfHuM&r$m%!16!#teFssA7B;Re1uJa2_~@l1IIdM07&Qz A`Tzg` delta 50 zcmbOyIZtwfA2XxTWPfHuMx)J*%!16!MhtqBsA7B;Re1uJa2_~@l1IIdM07!8R A_5c6? diff --git a/src/CecSharpTester/Properties/AssemblyInfo.cs b/src/CecSharpTester/Properties/AssemblyInfo.cs index e12aca9..1b62cf2 100644 --- a/src/CecSharpTester/Properties/AssemblyInfo.cs +++ b/src/CecSharpTester/Properties/AssemblyInfo.cs @@ -32,5 +32,5 @@ using System.Runtime.InteropServices; // You can specify all the values or you can default the Build and Revision Numbers // by using the '*' as shown below: // [assembly: AssemblyVersion("1.0.*")] -[assembly: AssemblyVersion("1.5.2.0")] -[assembly: AssemblyFileVersion("1.5.2.0")] +[assembly: AssemblyVersion("1.5.3.0")] +[assembly: AssemblyFileVersion("1.5.3.0")] diff --git a/src/LibCecSharp/AssemblyInfo.cpp b/src/LibCecSharp/AssemblyInfo.cpp index 5dfbef2..0765c23 100644 --- a/src/LibCecSharp/AssemblyInfo.cpp +++ b/src/LibCecSharp/AssemblyInfo.cpp @@ -13,7 +13,7 @@ using namespace System::Security::Permissions; [assembly:AssemblyTrademarkAttribute("")]; [assembly:AssemblyCultureAttribute("")]; -[assembly:AssemblyVersionAttribute("1.5.2.0")]; +[assembly:AssemblyVersionAttribute("1.5.3.0")]; [assembly:ComVisible(false)]; [assembly:CLSCompliantAttribute(true)]; diff --git a/src/cec-config-gui/Properties/AssemblyInfo.cs b/src/cec-config-gui/Properties/AssemblyInfo.cs index a1206f9..ad87601 100644 --- a/src/cec-config-gui/Properties/AssemblyInfo.cs +++ b/src/cec-config-gui/Properties/AssemblyInfo.cs @@ -32,5 +32,5 @@ using System.Runtime.InteropServices; // You can specify all the values or you can default the Build and Revision Numbers // by using the '*' as shown below: // [assembly: AssemblyVersion("1.0.*")] -[assembly: AssemblyVersion("1.5.2.0")] -[assembly: AssemblyFileVersion("1.5.2.0")] +[assembly: AssemblyVersion("1.5.3.0")] +[assembly: AssemblyFileVersion("1.5.3.0")] -- 2.34.1