Commit | Line | Data |
---|---|---|
c3c13157 LOK |
1 | libcec (1.5-2) unstable; urgency=low |
2 | ||
3 | * changed/added: | |
4 | * added Toshiba's vendor id, and set the device ID of the primary device to | |
5 | Toshiba's and transmit it when starting | |
6 | * lock in SyncedBuffer | |
7 | * added a timeout to StopThread() | |
8 | * also add commands to unsupported features when receiving | |
9 | CEC_ABORT_REASON_REFUSED | |
10 | * cec-config-gui: set cbPortNumber enabled when the physical address | |
11 | override isn't checked instead | |
12 | * cec-config-gui: added support for the new 'send inactive source' setting | |
13 | ||
14 | * interface changes: | |
15 | * added an 'send inactive source' option to libcec_configuration, only | |
16 | supported by client/server 1.5.1 and up. bugzid: 439 | |
17 | * added a command to the interface to start the bootloader directly, | |
18 | without going through all checks. bugzid: 218 | |
19 | * LibCecSharp: implemented support for the new 'send inactive source' | |
20 | setting | |
21 | ||
22 | * fixed: | |
23 | * don't send an updated configuration when libCEC hasn't been initialised | |
24 | fully. bugzid: 459 | |
25 | * don't send an updated configuration back when initialising. let the | |
26 | client call the GetCurrentConfiguration() method. bugzid: 459 | |
27 | * configuration updates from libCEC. bugzid: 459 | |
28 | * fixed accidental double deref. the method parameter already does that. | |
29 | github #24 | |
30 | * use CLOCK_MONOTONIC for timing info, since gettimeofday is affected by | |
31 | ntp and by manually adjusting the system time | |
32 | * the timeout value of pthread_cond_timedwait has to be referenced to | |
33 | CLOCK_REALTIME | |
34 | * don't add data to the input buffer in CUSBCECAdapterCommunication before | |
35 | it's fully initialised | |
36 | * fixed return value of CUSBCECAdapterCommunication::ParseMessage(). fixes | |
37 | messages not being parsed in certain occasions | |
38 | * don't try to transmit when the processor is being stopped | |
39 | * set the server version in the LibCEC's constructor, since this is | |
40 | checked by clients. fixes 'invalid libCEC version' popup when inserting | |
41 | the adapter | |
42 | * don't wait for the full timeout to pass in CCECProcessor:: | |
43 | OpenConnection(), but retry to connect 2 times. fixes 'port busy' errors | |
44 | when initialising libCEC. bugzid: 436 | |
45 | * use the correct Sleep() method in CCECProcessor::OpenConnection(). the | |
46 | thread hasn't been started there yet, so the sleep wasn't working. fixes | |
47 | 'device or resource busy' when plugging in the adapter. bugzid: 436 | |
48 | * check the adapter ping and firmware before starting the reader thread, so | |
49 | we really leave the com port alone for a second when it fails because of | |
50 | a busy error. bugzid: 436 | |
51 | * ensure that the connection is really closed before retrying to connect. | |
52 | bugzid: 436 | |
53 | * LibCecSharp: recreate the delegates properly when (re)connecting to | |
54 | LibCecSharp | |
55 | ||
56 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 28 Feb 2012 21:19:00 +0100 | |
57 | ||
099a04fb LOK |
58 | libcec (1.5-1) unstable; urgency=low |
59 | ||
60 | * changed/added: | |
61 | * a new libcec_configuration structs, which allows the client app to pass | |
fbaa8dd5 LOK |
62 | a number of new options, like waking multiple devices on startup, |
63 | overriding the vendor id, etc. | |
64 | * a new configuration GUI for Windows (.NET). this allows you to set | |
65 | libCEC's configuration for XBMC in a convenient GUI. | |
66 | * a CLI configuration tool (unfinished) for other platforms. will be | |
67 | finished in an update. | |
099a04fb | 68 | * implemented power up for LG devices other than a TV |
fbaa8dd5 LOK |
69 | * win32: don't install libcec to the system directory by default, and |
70 | delete previous (testing) copies if present | |
71 | * wait for multiple responses, not just for one at a time | |
72 | * set the ackmask to 0 when closing the connection | |
73 | * don't send 'image view on' when calling SetActiveSource() | |
74 | * don't send power on, acitve source and standby commands by default in | |
75 | cec-client | |
76 | * platform: added CTryLockObject | |
77 | * platform: added an Init() method in CTimeout, so it can be reset | |
78 | ||
099a04fb LOK |
79 | * interface changes: |
80 | * added a new initialiser method: CecInitialise()/cec_initialise(), that | |
fbaa8dd5 LOK |
81 | accepts a "libc_configuration" struct as parameter. this way, the |
82 | signature of the init method can stay the same when adding new options. | |
83 | in LibCecSharp, the new method appears as a new constructor. | |
84 | * added CanPersistConfiguration()/cec_can_persist_configuration() | |
85 | * added PersistConfiguration()/cec_persist_configuration() | |
099a04fb | 86 | * added GetCurrentConfiguration()/cec_get_current_configuration() |
fbaa8dd5 | 87 | * added SetConfiguration()/cec_set_configuration() |
099a04fb | 88 | * added GetLogicalAddresses()/cec_get_logical_addresses(): returns the list |
fbaa8dd5 | 89 | of addresses controlled by libCEC |
099a04fb | 90 | * added RescanDevices()/cec_rescan_devices(): lets libCEC force polls to |
fbaa8dd5 LOK |
91 | all logical addresses. |
92 | * added a callback that is called when libCEC's configuration changed. | |
93 | * moved the autodetect address api call to libcec_configuration. only send | |
94 | power up commands to non-tv devices when the power state is not | |
95 | on/transition->on. let players call the power up/power down command. | |
96 | * return the anynet return keycode directly instead of translating it to | |
97 | 'return' for v1.5.0+ clients | |
98 | * extracted CecSharpTypes.h in LibCecSharp. LibCecSharp is now in the | |
99 | CecSharp namespace | |
099a04fb | 100 | * include the local cectypes.h in cec.h and cecc.h instead of system wide |
fbaa8dd5 LOK |
101 | * deprecated GetLibVersion() methods. use libcec_configuration instead |
102 | * removed deprecated CECCreate() method | |
099a04fb LOK |
103 | |
104 | * fixed: | |
105 | * fixed a lot of LG specific issues | |
fbaa8dd5 | 106 | * fixed OS-X compilation. credits: Dustin Cooper |
099a04fb | 107 | * fixed a couple of possible deadlocks, e.g. when closing the connection |
fbaa8dd5 LOK |
108 | while receiving data |
109 | * cleaned up existing code | |
099a04fb | 110 | * libCEC no longer puts incoming data in a fifo buffer, but tries to |
fbaa8dd5 LOK |
111 | process it directly, which fixes issues like libCEC blocking processing |
112 | new commands while waiting for transmission acks. | |
113 | * 'unsupported command' marking in CCECBusDevice | |
114 | * ensure that the ackmask is always set to 0 when closing the connection | |
115 | and that the call doesn't block the Close() call | |
116 | * don't try to read or write in CUSBCECAdapterCommunication when the | |
117 | connection has been closed | |
118 | * LibCecSharp: added quotes to the linker statement for libcec.lib. fixes | |
119 | compilation in paths with spaces. closes #20 | |
120 | * LibCecSharp: set the callback methods in libcec to NULL before closing | |
121 | the connection, since these might already have been destroyed in .NET | |
122 | * LibCecSharp: delete the internal callback struct when closing the | |
123 | connection | |
124 | * LibCecSharp: pass correctly formatted logical address lists | |
125 | * ensure that the vendor id is requested first when requesting info from a | |
126 | device, so we are using the correct handler | |
127 | * keep the 'busy state' of the command handler in CCECBusDevice | |
128 | * poll the next device when the current is handled by libCEC. | |
129 | * check the vendor id of a device before sending a power on command | |
130 | * ensure that there always is at least one device type set | |
131 | * transmit a keypress and key release as power on command when the target | |
132 | device isn't the TV | |
133 | * don't do a full reinit when not needed | |
134 | * fix active source switches for the standard CEC implementation | |
135 | * ensure that we don't send data to ourself | |
136 | * check whether the port is open, not whether libCEC is initialised in | |
137 | Transmit() | |
138 | * platform: fixed return value from CCondition::Wait() | |
139 | * platform: don't broadcast but wake one thread in | |
140 | CProtectedSocket::MarkReady() | |
141 | * platform: include stdint.h in windows/os-types.h instead of typedef'ing | |
142 | ints | |
143 | * platform: fixed tcp socket error handling and return value. | |
144 | * platform: fixed return values of socket operations in lib/platform | |
099a04fb | 145 | * platform: added predicate in CCondition |
fbaa8dd5 LOK |
146 | * deleted the signed driver from the tree, since that doesn't work. let the |
147 | installer create a new signed driver on the production build system | |
099a04fb LOK |
148 | |
149 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 19 Feb 2012 01:04:00 +0100 | |
150 | ||
c75f7f45 LOK |
151 | libcec (1.4-4) unstable; urgency=low |
152 | ||
153 | * changed/added: | |
154 | * added tcp client sockets to lib/platform (WIP) | |
155 | * clean up lib/platform | |
156 | * added: set controlled mode on after opening a connection to the adapter | |
157 | (for firmware v2) | |
158 | * added an IAdapterCommunicationCallback interface an use a callback method | |
159 | to pass newly received cec_commands to CCECProcessor | |
160 | * added "driver only" and "driver + libcec" sections to the installer | |
161 | * added a signed driver | |
162 | * created a separate driver installer, which is included in the libCEC | |
163 | installer. uninstalls the old unsigned version of libCEC and the driver | |
164 | when it's found and installs the new one in C:\Program Files(x86)\ | |
165 | Pulse Eight\USB-CEC Adapter. | |
166 | * don't sign development binaries with a temporary key. devs can do that | |
167 | themselves when they want LibCecSharp in the GAC | |
168 | * interface changes: | |
169 | * added SetStreamPath()/cec_set_stream_path_logical()/ | |
170 | cec_set_stream_path_physical() to the interface, to send a | |
171 | "set stream path" command over the CEC bus, used to activate another | |
172 | source. | |
173 | * fixed: | |
174 | * transmit 'menu state activated' after the stream path has been set to a | |
175 | device that is handled by libCEC. should fix remote commands not working | |
176 | properly on Panasonic TVs and after another source has been active. | |
177 | bugzid: 233 | |
178 | * set the ackmask to 0x0 when trying to find a free logical address | |
179 | * keep trying to reconnect to the com port until the timeout runs out. | |
180 | bugzid: 230 | |
181 | * wait 500 ms before trying to retransmit a command. always wait for the | |
182 | result of a transmission in CCECCommandHandler::Transmit() | |
183 | * receive and send full cec_commands, not CCECAdapterMessages in | |
184 | CAdapterCommunication. extract an IAdapterCommunication interface. fixed | |
185 | potentially missed data in CAdapterCommunication | |
186 | * close and delete the connection when the processor thread ends. fixes | |
187 | reconnect after standby (access denied / connection already opened) | |
188 | * don't replace handlers when not initialised, or the primary device's | |
189 | logical addres isn't known yet, which can lead to crashes. don't call | |
190 | handlers directly in CCECProcessor without holding a lock on them | |
191 | * fixed possible crash when command handler were switched while it was | |
192 | being used | |
193 | * keep the mutex locked when calling ReplaceHandlers() in CCECProcessor | |
194 | * win32: also timeout when data is received in SocketRead() | |
195 | * win32: fixed < vista runtime and compilation | |
196 | * win32: ping the adapter and request the firmware version in | |
197 | CUSBCECAdapterCommunication instead of CCECProcesssor. fixes failed | |
198 | libCEC inits | |
199 | * win32: fixed crash on exit in LibCecSharp | |
200 | ||
201 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 6 Feb 2012 14:26:00 +0100 | |
202 | ||
1858a00e LOK |
203 | libcec (1.4-3) unstable; urgency=low |
204 | ||
205 | * fixed: | |
206 | * try to ping the device and grab the firmware version until the connect | |
207 | timeout runs out. fixes failed reconnect after standby, when the adapter | |
208 | is still being initialised | |
209 | ||
210 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 27 Jan 2012 13:05:00 +0100 | |
211 | ||
2819463f LOK |
212 | libcec (1.4-2) unstable; urgency=low |
213 | ||
214 | * changed/added: | |
215 | * added a firmware flash script for linux. | |
216 | usage: ./support/cec-flash-device.sh /path/to/firware.hex | |
217 | * refactored threading/locking - added windows native instead of | |
218 | pthread-win32, so we can compile native x64 too | |
219 | * check whether the adapter responds when connecting to it and report the | |
1858a00e | 220 | firmware version of the adapter after connecting |
2819463f LOK |
221 | * moved create-installer.cmd to support/ |
222 | * completely removed AM_SILENT_RULES | |
223 | * interface changes: | |
224 | * compile LibCecSharp against .NET framework 2.0 and sign the assembly | |
225 | * fixed: | |
226 | * only the key release events were sent, not keypresses, which appeared in | |
227 | clients as laggy keypresses | |
228 | * fixed reconnect after standby | |
229 | * wait for active tranmission to finish when opening a connection to the | |
230 | adapter. fixes initialisation errors | |
231 | * set the default transmit timeout properly instead of using 0 | |
232 | * fixed possible deadlock because of a negative timeout in | |
233 | CAdapterCommunication::WaitForTransmitSucceeded() | |
234 | * fixed error message in cec-client (unable to open the device on port ...) | |
b9aae0cd | 235 | * exit cec-client after entering bootloader mode |
2819463f LOK |
236 | * MSGCODE_START_BOOTLOADER doesn't respond with MSGCODE_COMMAND_ACCEPTED |
237 | ||
238 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 25 Jan 2012 23:28:00 +0100 | |
239 | ||
e6b4a29e LOK |
240 | libcec (1.4-1) unstable; urgency=low |
241 | ||
242 | * changed/added: | |
243 | * added the vendor id for Sony | |
244 | * always refresh the power state of a device when it hasn't been updated | |
245 | for 30 seconds | |
246 | * do silent builds by default | |
247 | * interface changes: | |
248 | * added optional callback methods to libCEC. enable them by calling | |
249 | EnableCallbacks(ICECCallbacks *callbacks) / | |
250 | cec_enable_callbacks(ICECCallbacks *callbacks). after this method is | |
251 | called, the GetNext...() methods will not return any data | |
252 | * added the same callbacks to LibCecSharp. implement CecCallbackMethods | |
253 | and override the methods in there | |
254 | * fixed: | |
255 | * use the given timeout when trying to open a connection to the CEC | |
256 | adapter | |
257 | * resolved difference between method name in LibCECC.cpp and cecc.h. | |
258 | credits: Doug Johnson | |
259 | * don't transmit physical addresses while holding a lock in CCECProcessor | |
260 | * don't hold a lock when sending an active source message. | |
261 | * unload libCEC when the lib version is invalid | |
262 | * "unused" warnings suppressed | |
263 | ||
264 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 12 Jan 2012 19:06:00 +0100 | |
265 | ||
d0d8b3c0 | 266 | libcec (1.3-3) unstable; urgency=low |
f962137e LOK |
267 | |
268 | * changed/added: | |
269 | * place in libudev include in an extern C block. fixes compilations on | |
270 | older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann | |
271 | * added pkg-config to the dependencies list. issue #15 | |
272 | * updated README. closes #14 | |
273 | * added a script that tests some basic functions of the CEC adapter: | |
274 | /support/cec-test-device.sh | |
275 | * fixed: | |
276 | * don't make libCEC the active source when changing the physical address. | |
277 | don't send active source messages on startup, when not the active source | |
278 | fixes unwanted device power ups | |
279 | * replace the command handler directly after receiving a changed vendor | |
280 | id. change the primary type from recording device to playback device | |
281 | for panasonic TVs | |
282 | * don't send a deck status update when sending an active source message | |
283 | for panasonic TVs | |
284 | * only switch handlers once when using the generic handler | |
285 | * don't switch handlers when not needed | |
286 | * hold a lock in CCECProcessor::SetHDMIPort() | |
287 | * don't send deck status updates when sending an active source message by | |
288 | default | |
289 | ||
290 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 3 Jan 2012 22:48:00 +0100 | |
291 | ||
188d35cf LOK |
292 | libcec (1.3-2) unstable; urgency=low |
293 | ||
294 | * changed/added: | |
295 | * copy libcec.dll to the XBMC installation dir when XBMC is found | |
296 | * disable background polling. let the client request this info when needed | |
297 | * update the power status of a device when it's set to | |
298 | CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON | |
299 | * wait for the correct response when requesting something, not just any | |
300 | response | |
301 | * don't keep trying the same command/request after receiving a feature | |
302 | abort message | |
303 | * interface changes: | |
304 | * change the previously unused boolean parameter in volume control methods | |
305 | to bSendRelease, and only send a key release when it's true. default to | |
306 | true | |
307 | * fixed: | |
308 | * don't send the power up/down keypress to listeners when in the initial | |
309 | device state (powered off). fixes unexpected shutdown in XBMC when | |
310 | connecting to the CEC adapter. | |
311 | * send a 'menu state activated' command when starting up. bugzid: 113 | |
312 | * don't wait for a response when not needed | |
313 | * don't hold a lock while waiting for a response. fixes failed libCEC | |
314 | inits and slow responses | |
315 | * don't replace a command handler when it's being used. fixes possible | |
316 | crash on startup | |
317 | * don't try to do anything before the processor thread has started | |
318 | * don't transmit active source messages when the physical address is | |
319 | still 0xFFFF | |
320 | * don't init the default handler before the physical address is known | |
321 | ||
322 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 29 Dec 2011 03:05:00 +0100 | |
323 | ||
2c7c8c4b | 324 | libcec (1.3-1) unstable; urgency=low |
dfb08039 LOK |
325 | |
326 | * changed/added: | |
327 | * make libudev optional. if libudev is not available on linux, adapter | |
328 | autodetection will also not be available. fixes compilation on Hardy/ATV1 | |
329 | * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET | |
330 | language | |
331 | * added vendor support for LG | |
332 | * added vendor support for Philips | |
333 | * added vendor support for Yamaha | |
334 | * added vendor support for Onkyo | |
335 | * added 'scan' command to cec-client, that displays info about devices on | |
336 | the bus. made all ToString() methods available on the interface. | |
337 | * added '-s' or '--single-command' to cec-client. starting cec-client with | |
338 | this parameter executes a single command in cec-client and does not power | |
339 | on devices on startup and power them off on exit. this way, you can use | |
340 | cec-client in a shell script. since there's some handshaking involved at | |
341 | startup, this is not very fast. to execute a command and only display the | |
342 | result and any error/warning, execute it with | |
343 | RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch | |
344 | files are a bit different) | |
19330705 LOK |
345 | * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to |
346 | cec-client's parameters | |
dfb08039 LOK |
347 | * handle image view on and text view on |
348 | * handle routing information and report physical address opcodes | |
349 | * handle audio status updates | |
350 | * send ping and bootloader commands via the output queue | |
351 | * scan the CEC bus for devices when starting libcec | |
352 | * pass all commands that are directed at libcec to listeners | |
353 | * interface changes: | |
354 | * added GetActiveSource()/cec_get_active_source() | |
355 | * added IsActiveSource()/cec_is_active_source() | |
356 | * added GetDevicePhysicalAddress()/cec_get_device_physical_address() | |
357 | * added GetDeviceOSDName()/cec_get_osd_name() | |
358 | * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/ | |
359 | cec_send_key_release() | |
360 | * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(), | |
361 | MuteAudio()/cec_mute_audio() | |
362 | * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/ | |
363 | cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type(). | |
364 | * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load | |
365 | and when a device with the same physical address is detected, libcec will | |
366 | use the selected hdmi port on that device. should fix source selection on | |
367 | other devices, like an amplifier | |
368 | * added a hook in libcec for physical address autodetection | |
369 | * fixed: | |
370 | * don't request the physical address from the tv (it's always 0x0000) | |
371 | * set the proper ackmask before doing anything else | |
372 | * don't unlock the transmit mutex in CCECProcessor while waiting for an | |
373 | answer | |
374 | * fix device polling | |
375 | * refactor CEC read/write. keep a single lock for all writes, not one per | |
376 | device | |
377 | * ignore other data while waiting for a response | |
378 | * retry failed tranmissions | |
379 | * don't delete a message before it's been sent when starting the bootloader | |
380 | * or when sending a ping | |
381 | * fixed possible segfault when switching the command handler after a vendor | |
382 | * id changed | |
383 | * handle audio opcodes correctly | |
384 | * inactive source should be directly addressed at the TV | |
385 | * don't report a changed physical address when it hasn't changed | |
386 | * routing information sets the stream path, not the physical address | |
387 | * don't scan the whole bus in CCECProcessor::IsActiveDeviceType() | |
388 | * don't request the vendor id from devices that are handled by libcec | |
389 | * mark device status as present when a command was received from a device | |
390 | * always send a power on command in CCECBusDevice::PowerOn() | |
391 | * don't request updates statusses unless needed | |
392 | * report physical address sends 3 parameters, not 2. check whether the | |
393 | device type is correct | |
394 | * devices can send vendor commands from other vendors, so don't assume the | |
395 | device is of a certain vendor when it sends commands with a vendor id | |
396 | * thread safety fixes. bugzid: 19 | |
397 | * clear any previous input when opening a connection to the adapter. | |
398 | bugzid: 54 | |
399 | * use the correct source address in CSLCommandHandler::HandleVendorCommand() | |
400 | * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5 | |
401 | * renamed enum methods. fixes potential macro collision with isset(). | |
402 | thanks davilla | |
19330705 LOK |
403 | * don't change the active device when receiving stream path changed |
404 | messages. fixes wrong source selection when powering after the TV. | |
dfb08039 | 405 | |
19330705 | 406 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 09 Dec 2011 12:16:00 +0100 |
dfb08039 | 407 | |
94d98b71 LOK |
408 | libcec (1.2-1) unstable; urgency=low |
409 | ||
410 | * bugfixes: | |
411 | * pass the deck_control command to libcec listeners | |
412 | * check whether the initiator is valid in CCECProcessor::ParseCommand(). | |
413 | fixes possible segfault when parsing invalid data | |
414 | ||
415 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 12 Nov 2011 13:36:00 +0100 | |
416 | ||
c3da3073 LOK |
417 | libcec (1.1-3) unstable; urgency=low |
418 | ||
419 | * fixed return value in CCECProcessor::SetStreamPath(), which prevented | |
420 | active source and menu state from being sent | |
421 | ||
422 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 23:36:00 +0100 | |
423 | ||
f0197d4f LOK |
424 | libcec (1.1-2) unstable; urgency=low |
425 | ||
426 | * forgot to update the headers to v1.1 | |
427 | ||
428 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 18:56:00 +0100 | |
429 | ||
4f8dcef2 LOK |
430 | libcec (1.1-1) unstable; urgency=low |
431 | ||
432 | * interface changes: | |
433 | * added logical address autodetection and let libcec handle multiple types | |
434 | simultaniously. for logical address autodetection, you have to use | |
435 | CECInit()/cec_init_typed() instead of CECCreate()/cec_init() | |
436 | * added SetActiveSource()/cec_set_active_source() to the interface. | |
437 | deprecated SetActiveView()/cec_set_active_view() | |
438 | * added SetMenuState() | |
439 | * added PollDevice()/cec_poll_device() | |
440 | * removed duplicate method SetActiveSource() / SetActiveView() | |
441 | * added SetDeckControlMode() and SetDeckInfo() | |
442 | * fixed: | |
443 | * added vendor detection for panasonic and broadcast active view and set | |
444 | menu state when a panasonic device sets the stream path. thanks for the | |
445 | pointer cptcoconut. | |
446 | * added vendor code for pioneer | |
447 | * osd string is 13 chars max. don't send more | |
448 | * send the correct cec version for each device | |
449 | * switch to panasonic specific cec implementation if a panasonic device was | |
450 | detected | |
451 | * send the correct device type in TransmitPhysicalAddress() | |
452 | * send a reply from the correct device when the stream path is requested | |
453 | * opcode 0x80 means the stream path changed, not the physical address | |
454 | * don't poll for a vendor ID in monitoring mode | |
455 | * fixed parameter parsing in SetVendorId() | |
456 | * buffer up commands that are received while waiting for an ack. only send | |
457 | 'active source' message for the actual active source | |
458 | * win32: prepend the com port path with '\\.\', so com ports > 9 can be | |
459 | accessed. thanks smolesen | |
460 | * audio systems cannot be an active source, so don't transmit active | |
461 | source message from this device | |
462 | * only send 'active source' when powered on | |
463 | * only set the osd name for the primary device. use default values for | |
464 | others | |
465 | * increase physical address with 0x100 per device | |
466 | * win32: removed unneeded afxres.h include in the resource files, which | |
467 | is not present when using studio express. thanks Ghuron | |
468 | * fixed C headers | |
469 | * mark the active source as active and other devices as inactive | |
470 | * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER | |
c6b7b98b | 471 | * transmit the menu state as (active) when the stream path is set |
4f8dcef2 LOK |
472 | * changed: |
473 | * changed copyright of boblight files with permission of the original | |
474 | author | |
475 | * partial handling of audio related opcodes | |
476 | * more consistent log messages | |
477 | * set a device type and name for each CCECBusDevice | |
478 | * keep a power and menu state per device | |
479 | * renamed all Broadcast...() and Report...() methods to Transmit...() | |
480 | * renamed SetOSDString() to TransmitOSDString() | |
481 | * changed debug level of 'did not receive ack' from error to debug | |
482 | * only set the power status to 'on' for the primary device | |
483 | * moved method decriptions from cecc.h to cec.h | |
484 | * only send a power on command when a device isn't on already and set | |
485 | the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while | |
486 | powering on | |
487 | * handle CEC_OPCODE_STANDBY | |
488 | * handle CEC_OPCODE_ACTIVE_SOURCE | |
489 | * always start in standby mode and let the tv (or other device) send the | |
490 | power on command | |
491 | * renamed the last few enums | |
492 | * handle deck related opcodes. | |
493 | * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown' | |
494 | ||
495 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 17:42:00 +0100 | |
496 | ||
35d9c32a LOK |
497 | libcec (1.0-1) unstable; urgency=low |
498 | ||
499 | * interface changes: | |
500 | * set lib interface version back to 1.0 and rename GetLibVersion() to | |
501 | GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion() | |
502 | * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor | |
503 | version number to 1 | |
504 | * fixed: | |
505 | * samsung's vendor specific remote keypresses don't send key releases. added | |
506 | call to AddKey() directly after the keypress | |
507 | * always reset the button press time in CLibCEC::AddKey() | |
508 | * always wait for a signal in CCECProcessor::Transmit() | |
509 | * changed: | |
510 | * drop shared_ptr and use a normal pointer. removed boost dependency | |
511 | ||
512 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 04 Nov 2011 00:14:00 +0100 | |
513 | ||
b3efc8f2 LOK |
514 | libcec (0.8-2) unstable; urgency=low |
515 | ||
516 | * added 'libboost-dev' to build deps | |
517 | ||
518 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 23:31:00 +0100 | |
519 | ||
971d0e9e LOK |
520 | libcec (0.8-1) unstable; urgency=low |
521 | ||
522 | * interface changes: | |
523 | * added GetDevicePowerStatus()/cec_get_device_power_status() | |
524 | * added GetDeviceVendorId()/cec_get_device_vendor_id() | |
525 | * added GetDeviceMenuLanguage()/cec_get_device_menu_language() | |
526 | * added GetDeviceCecVersion()/cec_get_device_cec_version() | |
527 | * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when | |
b3efc8f2 LOK |
528 | monitoring is enabled, the device will only log the data it received, |
529 | but will not respond to any message | |
971d0e9e | 530 | * removed timeout parameter in Transmit() and included the ack timeout in |
b3efc8f2 | 531 | the cec_command struct |
971d0e9e LOK |
532 | * made the vendor id -> vendor name translation available |
533 | * made CEC_LOG levels powers of 2 | |
534 | * introduced CEC_LOG_TRAFFIC log level | |
535 | * fixed: | |
536 | * set the correct ackmask on startup | |
537 | * wait for ack while keeping a lock | |
538 | * wait for the processor thread to start before continueing on startup | |
539 | * wait for messages to be transmitted before continueing in | |
b3efc8f2 | 540 | CCECProcessor::Transmit() |
971d0e9e LOK |
541 | * only set the logical address once when it has changed |
542 | * correct source for broadcast messages | |
543 | * win32: create Release type installer | |
544 | * changed: | |
545 | * make all reads and write in CAdapterCommunication go through buffers. | |
546 | * poll for a vendor ID of connected devices and switch to a non-standard | |
b3efc8f2 | 547 | CEC implementation if needed. |
971d0e9e LOK |
548 | * added vendor detection of Samsung and LG devices |
549 | * handle samsung remote command 'return' | |
550 | * cec-client: | |
551 | * added -la and --logical-address to the command line params | |
552 | * added -d and --log-level params to cec-client | |
553 | * added -sf and --short-log-file, which only log the actual messages, not | |
b3efc8f2 | 554 | the level and timestamp |
971d0e9e LOK |
555 | * added -f and --log-file parameters to cec-client |
556 | * added option to change the log level to cec-client | |
557 | ||
b3efc8f2 | 558 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 22:58:00 +0100 |
971d0e9e | 559 | |
8f084f00 LOK |
560 | libcec (0.7-1) unstable; urgency=low |
561 | ||
562 | * send a keypress with 0 duration when a key is pressed and with a duration | |
563 | set when it's released | |
564 | * added SetOSDString() to the interface (not supported by all tvs) | |
565 | * fixed: 'routing change' is a broadcast message. log routing changes, but | |
566 | don't send a 'set active view' message, so the active input won't be | |
567 | changed | |
568 | * log keypresses in the debug log | |
569 | * added 'pa' command to cec-client, to change the physical address | |
570 | * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so | |
571 | the HDMI port number to use can be changed | |
572 | * fixed: put the message processing code from WaitForAck() in ParseMessage(). | |
573 | fixes missing incoming message logging of non-data messages when not | |
574 | waiting for an ACK | |
575 | * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK | |
576 | before returning | |
577 | * fixed: set initiator and destination first in cec_command::push_back(). | |
578 | fixes 'tx' command in cec-client | |
579 | * fixed: keep trying to connect while iTimeout isn't reached (default 10 | |
580 | seconds). fixes exit with a 'permission denied' error when the device isn't | |
581 | ready yet. remove CEC_SETTLE_DOWN_TIME | |
582 | * fixed: don't call SetActiveView() when reporting the power status. fixes | |
583 | loop which causes some TVs to report failed connections | |
584 | * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed. | |
585 | * fixed: add the device type as parameter when sending the physical address. | |
586 | thanks bobo1on1 | |
587 | * fixed: typo in libcec.pc.in | |
588 | * added optional strLib parameter to LoadLibCec(), so the location of the | |
589 | shared library can be specified | |
590 | * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB | |
591 | * use int instead of bool on the public C interface and remove stdbool.h include | |
592 | * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h => | |
593 | cecloader.h, CECTypes.h => cectypes.h | |
594 | * updated debian package. split up libcec and libcec-dev | |
595 | * fixed: changed to use dlopen instead of static linkage. shuffled headers a | |
596 | bit. bumped interface to version 7 | |
597 | * removed 'rt' from libraries. it's not needed (anymore) | |
598 | * fixed: reset the active view after a routing change. issue #1 | |
599 | * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an | |
600 | error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear | |
601 | * added contributors link | |
602 | ||
603 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 14 Oct 2011 17:34:00 +0200 | |
604 | ||
11d0a2d6 LOK |
605 | libcec (0.6-1) unstable; urgency=low |
606 | ||
607 | * bumped interface version to 6 | |
608 | * fixed packet output (reporting the OSD name correctly now) | |
609 | * refactored packet structs: split up in cec commands and adapter messages | |
610 | * fixed i/o timings | |
611 | * added Darwin support (thanks Davilla!) | |
612 | * fixed WaitForAck() | |
613 | * fixed possible deadlock when starting a new thread | |
614 | * implemented vendor id and device class parsing. full detection will follow | |
615 | * added "on" and "standby" commands to the test client | |
616 | * retransmit packets if needed | |
617 | * fix GetTimeMs() on linux | |
618 | * added timestamp to log messages | |
619 | ||
620 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 09 Oct 2011 15:15:00 +0200 | |
621 | ||
9519c249 | 622 | libcec (0.5-1) unstable; urgency=low |
25701fa6 LOK |
623 | |
624 | * bumped interface version to 5 | |
625 | * don't pass std::string and std::vector accross the interface | |
626 | * fixed heap corruption crashes on windows | |
627 | * fixed some memory leaks | |
628 | * reset all structs to default values before doing with them | |
629 | ||
11d0a2d6 | 630 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 07 Oct 2011 22:00:00 +0200 |
25701fa6 | 631 | |
262f3b05 LOK |
632 | libcec (0.4-3) unstable; urgency=low |
633 | ||
634 | * fixed reconnect | |
635 | * fixed some threading related bugs | |
636 | * fixed deadlock on exit | |
637 | * fixed wrongly reported physical address | |
638 | ||
639 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 06 Oct 2011 00:19:00 +0200 | |
640 | ||
4463fb80 LOK |
641 | libcec (0.4-2) unstable; urgency=low |
642 | ||
643 | * fixed int parameter sizes and some signed/unsigned warnings | |
644 | * check whether m_port isn't NULL in ReadFromDevice | |
645 | * stop the processor thread and delete the CSerialPort instance on exit | |
646 | * added mutex in CSerialPort | |
647 | * fix segfault on exit | |
648 | * renamed libPlatform -> platform. | |
649 | * stuck everything from libCEC in the CEC namespace to avoid namespace | |
650 | polution | |
651 | ||
652 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 23:45:00 +0200 | |
653 | ||
88c5a743 LOK |
654 | libcec (0.4-1) unstable; urgency=low |
655 | ||
656 | * bumped interface version to 4 | |
657 | * timeout parameter removed from Close()/cec_close(). return type changed to | |
658 | void | |
659 | * added cec_destroy() method | |
660 | * removed timeout parameter from Transmit() | |
661 | * change the default argument of PowerOnDevices() to CECDEVICE_TV | |
662 | * removed PowerOffDevices(). use StandbyDevices() instead | |
663 | * removed obsolete methods from the interface | |
664 | * fixed bug: pthread_cond_wait was called without the mutex locked | |
665 | * fixed possible deadlock: don't send messages and wait for an ack with the | |
666 | mutex locked in CCECParser | |
667 | * created a separate reader thread and fixed the 'lock timeout' bug | |
668 | * testclient: use CECDEVICE_TV instead of the default argument | |
669 | (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices() | |
670 | ||
671 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 00:48:00 +0200 | |
672 | ||
a9bb5b56 LOK |
673 | libcec (0.3-1) unstable; urgency=low |
674 | ||
675 | * added device detection support for Windows | |
676 | ||
677 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 02 Oct 2011 12:09:33 +0200 | |
678 | ||
679 | libcec (0.2-1) unstable; urgency=low | |
680 | ||
681 | * added a Close() method to the interface | |
682 | * Added CEC command that were received by the adapter in a buffer that can be | |
683 | read by a client with GetNextCommand()/cec_get_next_command(). added a | |
684 | 'help' command to the test client, that displays all available commands | |
685 | * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use | |
686 | SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to | |
687 | the testclient to set the logical address of the cec adapter | |
688 | * Added optional logical and physical address parameters to | |
689 | LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace | |
690 | close tag in CECExports.h. updated interface documentation. bumped | |
691 | interface version to 2. | |
692 | * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the | |
693 | test client. the previous one was too long and being rejected | |
694 | ||
695 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 28 Sep 2011 01:33:00 +0200 | |
696 | ||
abbca718 LOK |
697 | libcec (0.1-1) unstable; urgency=low |
698 | ||
699 | * Initial release v0.1 | |
700 | ||
a9bb5b56 | 701 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 28 Sep 2011 23:55:48 +0200 |