Commit | Line | Data |
---|---|---|
d3b96c62 LOK |
1 | libcec (1.6-4) unstable; urgency=low |
2 | ||
3 | * changed/added: | |
4 | * serial port locking on linux | |
5 | * cec-client: added -m/--monitor startup options, which will start a | |
6 | monitor-only client. use 'mon 0' to switch to a normal client | |
7 | * display an alert message when the firmware of the adapter can be upgraded | |
8 | * added CEC 1.4 opcodes | |
9 | * send a feature abort again for all unhandled commands | |
10 | * refactored CLibCEC so a client registers itself within CCECProcessor, | |
11 | which then allocates one or more logical addresses for it. | |
12 | ||
13 | * interface changes: | |
14 | * added a new setting, bMonitorOnly, which will start a monitor-only client | |
15 | ||
16 | * fixed: | |
17 | * ensure that we don't crash out when trying to stop a thread that hasn't | |
18 | been started yet | |
19 | * don't send a 'disconnected' alert when the close method is called | |
20 | * use the correct source when transmitting an abort message as a reposonse | |
21 | to a vendor command with id | |
22 | * removed statics | |
23 | * check the client version, not the server version in | |
24 | libcec_configuration::operator==() | |
25 | * cec-config: fix physical address detection | |
26 | * LibCecSharp: fixed buffer overrun when copying libcec_configuration. | |
27 | fixes crash when trying to save the configuration in the config gui. | |
28 | ||
29 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 14 May 2012 22:39:00 +0100 | |
30 | ||
e736e6be LOK |
31 | libcec (1.6-3) unstable; urgency=low |
32 | ||
33 | * changed/added: | |
34 | * cec-client: show the firmware build date if available in cec-client -l | |
35 | * cec-client: don't activate the source when starting | |
36 | * cec-client: group up the output of the 'scan' command, and add the | |
37 | currently active source to the output | |
38 | * log the libCEC version in the 'connected to the CEC adapter' log entry, | |
39 | and add the firmware build date to the line if it's available, so all | |
40 | relevant version info is available in 1 log line. | |
41 | * async writes for CUSBCECAdapterCommunication. less locks and polls, more | |
42 | speed | |
43 | * added 'make docs' target, that updates the doxygen documentation | |
44 | ||
45 | * interface changes: | |
46 | * added operator == and != for libcec_configuration | |
47 | * added GetResponseOpcode(cec_opcode opcode) to cec_command | |
48 | * added the firmware build date to libcec_configuration, so it can be | |
49 | displayed by the client too. | |
50 | * added static CLibCEC::Alert() method and CEC_ALERT_CONNECTION_LOST value | |
51 | * added a callback to handle menu state changes. if the callback method | |
52 | returns 1, then the change is processed by the CCECBusDevice too. if 0, | |
53 | then the CCECBusDevice will always have menu state 'activated', so | |
54 | keypresses are routed. bugzid: 724 | |
55 | * added a default menu language to libcec_configuration and set this | |
56 | language for devices controlled by libcec. bugzid: 69 | |
57 | ||
58 | * fixed | |
59 | * CCECProcessor::IsActiveSource() - TV was never checked | |
60 | * don't call the deprecated SetActiveView() method in cec-client | |
61 | * request the active source if unknown in CCECProcessor::GetActiveSource() | |
62 | * don't try to match a device with PA 0xFFFF. | |
63 | * don't change the power status of a device when changing the stream path | |
64 | * don't set the power status to 'powered off' when marking the source | |
65 | managed by libcec as inactive, or the tv will might send a power control | |
66 | keycode when making it active again, potentially shutting down the system | |
67 | * potential segfault in CCECProcessor::GetDeviceByPhysicalAddress() | |
68 | * stream path changes when changed to the TV source (PA 0) | |
69 | * clear the unsupported features list in CCECBusDevice::ResetDeviceStatus() | |
70 | * never mark vendor commands as unsupported (only some may be unsupported), | |
71 | as well as some others that should never be marked unsupported | |
72 | * don't retry in CCECCommandHandler if the command has been marked as | |
73 | unsupported | |
74 | * don't request the PA of devices when handling an incoming CEC command, or | |
75 | it'll block things while waiting for a response. if that response never | |
76 | comes, or comes late, then other incoming commands will be timed out | |
77 | before they are handled | |
78 | * optimisation - strip unneeded virtual keywords from top level | |
79 | implementations | |
80 | * use the vlcommandhandler for the primary device that is handled by libCEC | |
81 | when a panasonic tv is detected, so delayed activate source commands are | |
82 | using the correct handler. bugzid: 723 | |
83 | * set the power status of device controlled by libCEC to | |
84 | CEC_POWER_STATUS_ON | |
85 | instead of IN_TRANSITION_STANDBY_TO_ON. reset the device status of a | |
86 | device if it was detected as removed. bugzid: 755 | |
87 | * potentially uninitialised values in cec_command | |
88 | * delay the 'active source' command for panasonic, until the vendor command | |
89 | that reports that the TV is powered on has been received. bugzid: 723 | |
90 | * only respond to Give Physical Address with Report Physical Address. | |
91 | bugzid: 592 | |
92 | This fixes several reports of the TV improperly switching to the libcec | |
93 | device after it has previously switched to another source. Fix confirmed | |
94 | with Panasonic and also reported to be an issue with Samsung and | |
95 | Philips. | |
96 | * check whether callback methods are set to a valid ptr | |
97 | * number of retries for polls | |
98 | * win32: fix build in paths with spaces. bugzid: 730 | |
99 | * LibCecSharp: free the alert GC callback when cleaning up | |
100 | * the wrong setting was being read when powering on devices | |
101 | * close the connection when a comm error was detected, and notify the | |
102 | client via an alert | |
103 | * don't segfault when calling ThreadsWait() without a valid thread | |
104 | * lib/platform: fixed memleak | |
105 | * leak in CCECAdapterMessageQueue::Write | |
106 | * don't send commands if we know them to be unsupported. bugzid: 725 | |
107 | ||
108 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Apr 2012 11:30:00 +0100 | |
109 | ||
110 | libcec (1.6-2) unstable; urgency=low | |
111 | ||
112 | * fixed: | |
113 | * fixed typo in CUSBCECAdapterCommands::RequestSettings() that prevented | |
114 | the settings from being read. the settings were still written, but never | |
115 | read when bGetSettingsFromROM = 1. | |
116 | ||
117 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 18 Apr 2012 11:30:00 +0100 | |
118 | ||
c65aa417 LOK |
119 | libcec (1.6-1) unstable; urgency=medium |
120 | ||
121 | * changed/added: | |
122 | * full firmware V2 support | |
123 | * -o/--osdname argument for cec-client to set a custom osd name | |
124 | * added the firmware version to cec-client's -l / --list-devices command. | |
125 | bugzid: 631 | |
126 | * added power on command for Samsung AVR devices. bugzid: 361 | |
127 | * added buttoncode for 'channels list' on Samsung (0x96) | |
128 | * don't check for the windows ddk when a prebuilt driver installer is | |
129 | present | |
130 | * respond to Get Menu Language. bugzid: 547. In the event that the menu | |
131 | language is undefined in libcec (currently the default), the response | |
132 | will be a feature abort. | |
133 | ||
134 | * interface changes: | |
135 | * added the firmware version to libcec_configuration (read-only). bumped | |
136 | server version to 1.6.0. fixed 'unknown server version' message on | |
137 | startup. bugzid: 631 | |
138 | * added a new setting to control whether to put the TV in standby when the | |
139 | player is put in standby. added some missing bits (version numbers, | |
140 | config) to LibCecSharp. bugzid: 558 | |
141 | * added an alert callback. bugzid: 462 | |
142 | * added bShutdownOnStandby to libcec_configuration. bugzid: 660. This | |
143 | setting tells the client to shutdown when the TV switches off and is | |
144 | complimentary to bPowerOffOnStandby, which tells the PC to suspend. | |
145 | They are kept separate to maintain backwards compatability. | |
146 | ||
147 | * fixed | |
148 | * gcc 4.7 compilation | |
149 | * poll doesn't have an opcode. bugzid: 591 | |
150 | * wait for MSGEND when data was received when opening the connection. | |
151 | bugzid: 536 | |
152 | * mark the correct device as active source after a stream path change. | |
153 | if the new address is not found, but the old address is, then mark the | |
154 | old address as inactive. fixes TV switching back to the old active source | |
155 | when it scans for devices. bugzid: 592 | |
156 | * ensure that the vendor ID is sent before trying to activate any SL device | |
157 | bugzid: 574 | |
158 | * fixed possible crash when in CLibCEC::IsLibCECActiveSource() when libCEC | |
159 | doesn't know which device is the active source. bugzid: 479 | |
160 | * correct handling CEC_USER_CONTROL_CODE_POWER. This ensures that the power | |
161 | code always operates as a toggle, depending on the current state, and | |
162 | that SetCurrentButton is always called for a valid user control code. | |
163 | bugzid: 570 | |
164 | * frequency wasn't checked in GetTimeMs(), leading to incorrect wait times | |
165 | on some windows systems | |
166 | * refactored USB adapter communication. less locks, shorter locks, added | |
167 | documentation, lots of clean ups and no more incoming messages that are | |
168 | skipped | |
169 | * the destructor of CSerialSocket didn't call Close() | |
170 | * added guards in CSerialPort | |
171 | * reset m_socket to INVALID_SERIAL_SOCKET_VALUE after closing the | |
172 | connection | |
173 | * always wait for thread exit in CThread's desctructor | |
174 | * crash on exit after GetDeviceInformation() | |
175 | * check whether the destination is valid before setting anything in | |
176 | m_bWaitingForAck. fixes heap corruption and crash on exit. bugzid: 479 | |
177 | * bUseTVMenuLanguage from libcec_configuration wasn't copied in | |
178 | SetConfiguration(), so this setting was reset to the default value | |
179 | (enabled) every time. bugzid: 617 | |
180 | * request the vendor id of a device if needed when the device status is | |
181 | changed into 'present'. bugzid: 361 | |
182 | * give priority to messages from the TV. removed the global lock in | |
183 | CCECProcessor when sending. this is no longer needed. bugzid: 238 | |
184 | * add some bounds checking to the HDMI port number. bugzid: 508 | |
185 | * fixed usbser.sys copying in the driver .INF. bugzid: 503 | |
186 | * only update the physical address when it has actually changed. bugzid: | |
187 | 672 | |
188 | * moved the static variables in os-threads from the header to a separate | |
189 | cpp file, or it could lead to problems when included multiple times | |
190 | * don't send an active source command when the physical address couldn't be | |
191 | set, or it might confuse other CEC devices | |
192 | * serial socket timeouts. bugzid: 654 | |
193 | * fixed possible crash when trying to request a vendor id of a device when | |
194 | the address of libCEC isn't known yet. bugzid: 654 | |
195 | * extra guard so no commands are transmitted without a valid initiator. | |
196 | bugzid: 654 | |
197 | * moved the timed ping to a separate thread. bugzid: 654 | |
198 | * persist settings directly when they're changed, only persist settings | |
199 | that actually changed, only instruct the device to persist the settings | |
200 | in eeprom when something changed, and don't persist settings on exit. | |
201 | bugzid: 715 | |
202 | * cec-config-gui: persist settings both in the eeprom and in the settings | |
203 | xml file | |
204 | * validate the input in CCECProcessor::IsActiveSource(). fixes potential | |
205 | crash when the active source isn't known. bugzid: 671 | |
206 | ||
207 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 16 Apr 2012 18:03:00 +0100 | |
208 | ||
fe462cdd LOK |
209 | libcec (1.5-4) unstable; urgency=low |
210 | ||
211 | * changed/added: | |
212 | * OS-X installation requirements and pointer | |
213 | * full v2 firmware support: | |
214 | * ping the adapter every 15 seconds. bugzid: 541 | |
215 | * added v2 msgcodes. bugzid: 543 | |
216 | * implemented the write methods for the v2 configuration. bugzid: 543 | |
217 | * included the logical addresses in the persisted configuration for v2. | |
218 | bugzid: 543 | |
219 | * persist the configuration before closing the connection. only try to | |
220 | persist the configuration when talking to a v2 firmware. bugzid: 543 | |
221 | * added GetSetting() to CUSBCECAdapterCommunication. bugzid: 543 | |
222 | * read the persisted settings from the ROM, and update it in | |
223 | libcec_configuration if found. bugzid: 543 | |
224 | * cec-client: set bGetSettingsFromROM to 1 in cec-client. bugzid: 543 | |
225 | * cec-client: only read persisted EEPROM settings when -r or --rom is | |
226 | provided as cmdline arg. bugzid: 543 | |
227 | * call SetControlledMode(false) as last command when closing the | |
228 | connection in v2. bugzid: 542 | |
c65aa417 | 229 | * initial FreeBSD support: simply try to use ttyU* |
fe462cdd LOK |
230 | |
231 | * fixed: | |
232 | * set controlled mode and retry to send the previous command if it failed | |
233 | with MSGCODE_COMMAND_REJECTED | |
234 | * m_iLineTimeout was never initialised and used. fixes MSGCODE_REJECTED | |
235 | when transmitting a message and incorrect line timeouts being used | |
236 | * mac configure compile bugzid: 157 | |
237 | * cec-config-gui: fixed application exit when the user clicked 'no' when | |
238 | asked to reconnect. bugzid: 556 | |
239 | * only wait for multiple 'command accepted' response when sending a | |
240 | transmit command, and only to 1 in other cases. bugzid: 543 | |
241 | * set the correct logical address mask before switching to autonomous mode. | |
242 | bugzid: 543 | |
243 | * re-added SetLineTimeout(). bugzid: 543 | |
244 | * CUSBCECAdapterCommunication::SetControlledMode checked for the wrong sent | |
245 | state | |
246 | * os-x: don't add 0.5 before dividing in GetTimeMs() | |
247 | * os-x: struct timespec now values weren't set correctly | |
248 | ||
249 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 16 Mar 2012 10:12:00 +0100 | |
250 | ||
2e82cff0 LOK |
251 | libcec (1.5-3) unstable; urgency=low |
252 | ||
253 | * fixed: | |
254 | * OS-X compilation | |
255 | * default to firmware version 1 after 3 tries. some versions didn't send a | |
256 | version. | |
257 | * fixed cec-config win32 compilation | |
258 | ||
259 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 03 Mar 2012 15:21:00 +0100 | |
260 | ||
c3c13157 LOK |
261 | libcec (1.5-2) unstable; urgency=low |
262 | ||
263 | * changed/added: | |
264 | * added Toshiba's vendor id, and set the device ID of the primary device to | |
265 | Toshiba's and transmit it when starting | |
266 | * lock in SyncedBuffer | |
267 | * added a timeout to StopThread() | |
268 | * also add commands to unsupported features when receiving | |
269 | CEC_ABORT_REASON_REFUSED | |
270 | * cec-config-gui: set cbPortNumber enabled when the physical address | |
271 | override isn't checked instead | |
272 | * cec-config-gui: added support for the new 'send inactive source' setting | |
273 | ||
274 | * interface changes: | |
275 | * added an 'send inactive source' option to libcec_configuration, only | |
276 | supported by client/server 1.5.1 and up. bugzid: 439 | |
277 | * added a command to the interface to start the bootloader directly, | |
278 | without going through all checks. bugzid: 218 | |
279 | * LibCecSharp: implemented support for the new 'send inactive source' | |
280 | setting | |
0fabd366 | 281 | |
c3c13157 LOK |
282 | * fixed: |
283 | * don't send an updated configuration when libCEC hasn't been initialised | |
284 | fully. bugzid: 459 | |
285 | * don't send an updated configuration back when initialising. let the | |
286 | client call the GetCurrentConfiguration() method. bugzid: 459 | |
287 | * configuration updates from libCEC. bugzid: 459 | |
288 | * fixed accidental double deref. the method parameter already does that. | |
289 | github #24 | |
290 | * use CLOCK_MONOTONIC for timing info, since gettimeofday is affected by | |
291 | ntp and by manually adjusting the system time | |
292 | * the timeout value of pthread_cond_timedwait has to be referenced to | |
293 | CLOCK_REALTIME | |
294 | * don't add data to the input buffer in CUSBCECAdapterCommunication before | |
295 | it's fully initialised | |
296 | * fixed return value of CUSBCECAdapterCommunication::ParseMessage(). fixes | |
297 | messages not being parsed in certain occasions | |
298 | * don't try to transmit when the processor is being stopped | |
299 | * set the server version in the LibCEC's constructor, since this is | |
300 | checked by clients. fixes 'invalid libCEC version' popup when inserting | |
301 | the adapter | |
302 | * don't wait for the full timeout to pass in CCECProcessor:: | |
303 | OpenConnection(), but retry to connect 2 times. fixes 'port busy' errors | |
304 | when initialising libCEC. bugzid: 436 | |
305 | * use the correct Sleep() method in CCECProcessor::OpenConnection(). the | |
306 | thread hasn't been started there yet, so the sleep wasn't working. fixes | |
307 | 'device or resource busy' when plugging in the adapter. bugzid: 436 | |
308 | * check the adapter ping and firmware before starting the reader thread, so | |
309 | we really leave the com port alone for a second when it fails because of | |
310 | a busy error. bugzid: 436 | |
311 | * ensure that the connection is really closed before retrying to connect. | |
312 | bugzid: 436 | |
313 | * LibCecSharp: recreate the delegates properly when (re)connecting to | |
314 | LibCecSharp | |
315 | ||
316 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 28 Feb 2012 21:19:00 +0100 | |
317 | ||
099a04fb LOK |
318 | libcec (1.5-1) unstable; urgency=low |
319 | ||
320 | * changed/added: | |
321 | * a new libcec_configuration structs, which allows the client app to pass | |
fbaa8dd5 LOK |
322 | a number of new options, like waking multiple devices on startup, |
323 | overriding the vendor id, etc. | |
324 | * a new configuration GUI for Windows (.NET). this allows you to set | |
325 | libCEC's configuration for XBMC in a convenient GUI. | |
326 | * a CLI configuration tool (unfinished) for other platforms. will be | |
327 | finished in an update. | |
099a04fb | 328 | * implemented power up for LG devices other than a TV |
fbaa8dd5 LOK |
329 | * win32: don't install libcec to the system directory by default, and |
330 | delete previous (testing) copies if present | |
331 | * wait for multiple responses, not just for one at a time | |
332 | * set the ackmask to 0 when closing the connection | |
333 | * don't send 'image view on' when calling SetActiveSource() | |
334 | * don't send power on, acitve source and standby commands by default in | |
335 | cec-client | |
336 | * platform: added CTryLockObject | |
337 | * platform: added an Init() method in CTimeout, so it can be reset | |
338 | ||
099a04fb LOK |
339 | * interface changes: |
340 | * added a new initialiser method: CecInitialise()/cec_initialise(), that | |
fbaa8dd5 LOK |
341 | accepts a "libc_configuration" struct as parameter. this way, the |
342 | signature of the init method can stay the same when adding new options. | |
343 | in LibCecSharp, the new method appears as a new constructor. | |
344 | * added CanPersistConfiguration()/cec_can_persist_configuration() | |
345 | * added PersistConfiguration()/cec_persist_configuration() | |
099a04fb | 346 | * added GetCurrentConfiguration()/cec_get_current_configuration() |
fbaa8dd5 | 347 | * added SetConfiguration()/cec_set_configuration() |
099a04fb | 348 | * added GetLogicalAddresses()/cec_get_logical_addresses(): returns the list |
fbaa8dd5 | 349 | of addresses controlled by libCEC |
099a04fb | 350 | * added RescanDevices()/cec_rescan_devices(): lets libCEC force polls to |
fbaa8dd5 LOK |
351 | all logical addresses. |
352 | * added a callback that is called when libCEC's configuration changed. | |
353 | * moved the autodetect address api call to libcec_configuration. only send | |
354 | power up commands to non-tv devices when the power state is not | |
355 | on/transition->on. let players call the power up/power down command. | |
356 | * return the anynet return keycode directly instead of translating it to | |
357 | 'return' for v1.5.0+ clients | |
358 | * extracted CecSharpTypes.h in LibCecSharp. LibCecSharp is now in the | |
359 | CecSharp namespace | |
099a04fb | 360 | * include the local cectypes.h in cec.h and cecc.h instead of system wide |
fbaa8dd5 LOK |
361 | * deprecated GetLibVersion() methods. use libcec_configuration instead |
362 | * removed deprecated CECCreate() method | |
099a04fb LOK |
363 | |
364 | * fixed: | |
365 | * fixed a lot of LG specific issues | |
fbaa8dd5 | 366 | * fixed OS-X compilation. credits: Dustin Cooper |
099a04fb | 367 | * fixed a couple of possible deadlocks, e.g. when closing the connection |
fbaa8dd5 LOK |
368 | while receiving data |
369 | * cleaned up existing code | |
099a04fb | 370 | * libCEC no longer puts incoming data in a fifo buffer, but tries to |
fbaa8dd5 LOK |
371 | process it directly, which fixes issues like libCEC blocking processing |
372 | new commands while waiting for transmission acks. | |
373 | * 'unsupported command' marking in CCECBusDevice | |
374 | * ensure that the ackmask is always set to 0 when closing the connection | |
375 | and that the call doesn't block the Close() call | |
376 | * don't try to read or write in CUSBCECAdapterCommunication when the | |
377 | connection has been closed | |
378 | * LibCecSharp: added quotes to the linker statement for libcec.lib. fixes | |
379 | compilation in paths with spaces. closes #20 | |
380 | * LibCecSharp: set the callback methods in libcec to NULL before closing | |
381 | the connection, since these might already have been destroyed in .NET | |
382 | * LibCecSharp: delete the internal callback struct when closing the | |
383 | connection | |
384 | * LibCecSharp: pass correctly formatted logical address lists | |
385 | * ensure that the vendor id is requested first when requesting info from a | |
386 | device, so we are using the correct handler | |
387 | * keep the 'busy state' of the command handler in CCECBusDevice | |
388 | * poll the next device when the current is handled by libCEC. | |
389 | * check the vendor id of a device before sending a power on command | |
390 | * ensure that there always is at least one device type set | |
391 | * transmit a keypress and key release as power on command when the target | |
392 | device isn't the TV | |
393 | * don't do a full reinit when not needed | |
394 | * fix active source switches for the standard CEC implementation | |
395 | * ensure that we don't send data to ourself | |
396 | * check whether the port is open, not whether libCEC is initialised in | |
397 | Transmit() | |
398 | * platform: fixed return value from CCondition::Wait() | |
399 | * platform: don't broadcast but wake one thread in | |
400 | CProtectedSocket::MarkReady() | |
401 | * platform: include stdint.h in windows/os-types.h instead of typedef'ing | |
402 | ints | |
403 | * platform: fixed tcp socket error handling and return value. | |
404 | * platform: fixed return values of socket operations in lib/platform | |
099a04fb | 405 | * platform: added predicate in CCondition |
fbaa8dd5 LOK |
406 | * deleted the signed driver from the tree, since that doesn't work. let the |
407 | installer create a new signed driver on the production build system | |
099a04fb LOK |
408 | |
409 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 19 Feb 2012 01:04:00 +0100 | |
410 | ||
c75f7f45 LOK |
411 | libcec (1.4-4) unstable; urgency=low |
412 | ||
413 | * changed/added: | |
414 | * added tcp client sockets to lib/platform (WIP) | |
415 | * clean up lib/platform | |
416 | * added: set controlled mode on after opening a connection to the adapter | |
417 | (for firmware v2) | |
418 | * added an IAdapterCommunicationCallback interface an use a callback method | |
419 | to pass newly received cec_commands to CCECProcessor | |
420 | * added "driver only" and "driver + libcec" sections to the installer | |
421 | * added a signed driver | |
422 | * created a separate driver installer, which is included in the libCEC | |
423 | installer. uninstalls the old unsigned version of libCEC and the driver | |
424 | when it's found and installs the new one in C:\Program Files(x86)\ | |
425 | Pulse Eight\USB-CEC Adapter. | |
426 | * don't sign development binaries with a temporary key. devs can do that | |
427 | themselves when they want LibCecSharp in the GAC | |
428 | * interface changes: | |
429 | * added SetStreamPath()/cec_set_stream_path_logical()/ | |
430 | cec_set_stream_path_physical() to the interface, to send a | |
431 | "set stream path" command over the CEC bus, used to activate another | |
432 | source. | |
433 | * fixed: | |
434 | * transmit 'menu state activated' after the stream path has been set to a | |
435 | device that is handled by libCEC. should fix remote commands not working | |
436 | properly on Panasonic TVs and after another source has been active. | |
437 | bugzid: 233 | |
438 | * set the ackmask to 0x0 when trying to find a free logical address | |
439 | * keep trying to reconnect to the com port until the timeout runs out. | |
440 | bugzid: 230 | |
441 | * wait 500 ms before trying to retransmit a command. always wait for the | |
442 | result of a transmission in CCECCommandHandler::Transmit() | |
443 | * receive and send full cec_commands, not CCECAdapterMessages in | |
444 | CAdapterCommunication. extract an IAdapterCommunication interface. fixed | |
445 | potentially missed data in CAdapterCommunication | |
446 | * close and delete the connection when the processor thread ends. fixes | |
447 | reconnect after standby (access denied / connection already opened) | |
448 | * don't replace handlers when not initialised, or the primary device's | |
449 | logical addres isn't known yet, which can lead to crashes. don't call | |
450 | handlers directly in CCECProcessor without holding a lock on them | |
451 | * fixed possible crash when command handler were switched while it was | |
452 | being used | |
453 | * keep the mutex locked when calling ReplaceHandlers() in CCECProcessor | |
454 | * win32: also timeout when data is received in SocketRead() | |
455 | * win32: fixed < vista runtime and compilation | |
456 | * win32: ping the adapter and request the firmware version in | |
457 | CUSBCECAdapterCommunication instead of CCECProcesssor. fixes failed | |
458 | libCEC inits | |
459 | * win32: fixed crash on exit in LibCecSharp | |
460 | ||
461 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Mon, 6 Feb 2012 14:26:00 +0100 | |
462 | ||
1858a00e LOK |
463 | libcec (1.4-3) unstable; urgency=low |
464 | ||
465 | * fixed: | |
466 | * try to ping the device and grab the firmware version until the connect | |
467 | timeout runs out. fixes failed reconnect after standby, when the adapter | |
468 | is still being initialised | |
469 | ||
470 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 27 Jan 2012 13:05:00 +0100 | |
471 | ||
2819463f LOK |
472 | libcec (1.4-2) unstable; urgency=low |
473 | ||
474 | * changed/added: | |
475 | * added a firmware flash script for linux. | |
476 | usage: ./support/cec-flash-device.sh /path/to/firware.hex | |
477 | * refactored threading/locking - added windows native instead of | |
478 | pthread-win32, so we can compile native x64 too | |
479 | * check whether the adapter responds when connecting to it and report the | |
1858a00e | 480 | firmware version of the adapter after connecting |
2819463f LOK |
481 | * moved create-installer.cmd to support/ |
482 | * completely removed AM_SILENT_RULES | |
483 | * interface changes: | |
484 | * compile LibCecSharp against .NET framework 2.0 and sign the assembly | |
485 | * fixed: | |
486 | * only the key release events were sent, not keypresses, which appeared in | |
487 | clients as laggy keypresses | |
488 | * fixed reconnect after standby | |
489 | * wait for active tranmission to finish when opening a connection to the | |
490 | adapter. fixes initialisation errors | |
491 | * set the default transmit timeout properly instead of using 0 | |
492 | * fixed possible deadlock because of a negative timeout in | |
493 | CAdapterCommunication::WaitForTransmitSucceeded() | |
494 | * fixed error message in cec-client (unable to open the device on port ...) | |
b9aae0cd | 495 | * exit cec-client after entering bootloader mode |
2819463f LOK |
496 | * MSGCODE_START_BOOTLOADER doesn't respond with MSGCODE_COMMAND_ACCEPTED |
497 | ||
498 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 25 Jan 2012 23:28:00 +0100 | |
499 | ||
e6b4a29e LOK |
500 | libcec (1.4-1) unstable; urgency=low |
501 | ||
502 | * changed/added: | |
503 | * added the vendor id for Sony | |
504 | * always refresh the power state of a device when it hasn't been updated | |
505 | for 30 seconds | |
506 | * do silent builds by default | |
507 | * interface changes: | |
508 | * added optional callback methods to libCEC. enable them by calling | |
509 | EnableCallbacks(ICECCallbacks *callbacks) / | |
510 | cec_enable_callbacks(ICECCallbacks *callbacks). after this method is | |
511 | called, the GetNext...() methods will not return any data | |
512 | * added the same callbacks to LibCecSharp. implement CecCallbackMethods | |
513 | and override the methods in there | |
514 | * fixed: | |
515 | * use the given timeout when trying to open a connection to the CEC | |
516 | adapter | |
517 | * resolved difference between method name in LibCECC.cpp and cecc.h. | |
518 | credits: Doug Johnson | |
519 | * don't transmit physical addresses while holding a lock in CCECProcessor | |
520 | * don't hold a lock when sending an active source message. | |
521 | * unload libCEC when the lib version is invalid | |
522 | * "unused" warnings suppressed | |
523 | ||
524 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 12 Jan 2012 19:06:00 +0100 | |
525 | ||
d0d8b3c0 | 526 | libcec (1.3-3) unstable; urgency=low |
f962137e LOK |
527 | |
528 | * changed/added: | |
529 | * place in libudev include in an extern C block. fixes compilations on | |
530 | older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann | |
531 | * added pkg-config to the dependencies list. issue #15 | |
532 | * updated README. closes #14 | |
533 | * added a script that tests some basic functions of the CEC adapter: | |
534 | /support/cec-test-device.sh | |
535 | * fixed: | |
536 | * don't make libCEC the active source when changing the physical address. | |
537 | don't send active source messages on startup, when not the active source | |
538 | fixes unwanted device power ups | |
539 | * replace the command handler directly after receiving a changed vendor | |
540 | id. change the primary type from recording device to playback device | |
541 | for panasonic TVs | |
542 | * don't send a deck status update when sending an active source message | |
543 | for panasonic TVs | |
544 | * only switch handlers once when using the generic handler | |
545 | * don't switch handlers when not needed | |
546 | * hold a lock in CCECProcessor::SetHDMIPort() | |
547 | * don't send deck status updates when sending an active source message by | |
548 | default | |
549 | ||
550 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 3 Jan 2012 22:48:00 +0100 | |
551 | ||
188d35cf LOK |
552 | libcec (1.3-2) unstable; urgency=low |
553 | ||
554 | * changed/added: | |
555 | * copy libcec.dll to the XBMC installation dir when XBMC is found | |
556 | * disable background polling. let the client request this info when needed | |
557 | * update the power status of a device when it's set to | |
558 | CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON | |
559 | * wait for the correct response when requesting something, not just any | |
560 | response | |
561 | * don't keep trying the same command/request after receiving a feature | |
562 | abort message | |
563 | * interface changes: | |
564 | * change the previously unused boolean parameter in volume control methods | |
565 | to bSendRelease, and only send a key release when it's true. default to | |
566 | true | |
567 | * fixed: | |
568 | * don't send the power up/down keypress to listeners when in the initial | |
569 | device state (powered off). fixes unexpected shutdown in XBMC when | |
570 | connecting to the CEC adapter. | |
571 | * send a 'menu state activated' command when starting up. bugzid: 113 | |
572 | * don't wait for a response when not needed | |
573 | * don't hold a lock while waiting for a response. fixes failed libCEC | |
574 | inits and slow responses | |
575 | * don't replace a command handler when it's being used. fixes possible | |
576 | crash on startup | |
577 | * don't try to do anything before the processor thread has started | |
578 | * don't transmit active source messages when the physical address is | |
579 | still 0xFFFF | |
580 | * don't init the default handler before the physical address is known | |
581 | ||
582 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 29 Dec 2011 03:05:00 +0100 | |
583 | ||
2c7c8c4b | 584 | libcec (1.3-1) unstable; urgency=low |
dfb08039 LOK |
585 | |
586 | * changed/added: | |
587 | * make libudev optional. if libudev is not available on linux, adapter | |
588 | autodetection will also not be available. fixes compilation on Hardy/ATV1 | |
589 | * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET | |
590 | language | |
591 | * added vendor support for LG | |
592 | * added vendor support for Philips | |
593 | * added vendor support for Yamaha | |
594 | * added vendor support for Onkyo | |
595 | * added 'scan' command to cec-client, that displays info about devices on | |
596 | the bus. made all ToString() methods available on the interface. | |
597 | * added '-s' or '--single-command' to cec-client. starting cec-client with | |
598 | this parameter executes a single command in cec-client and does not power | |
599 | on devices on startup and power them off on exit. this way, you can use | |
600 | cec-client in a shell script. since there's some handshaking involved at | |
601 | startup, this is not very fast. to execute a command and only display the | |
602 | result and any error/warning, execute it with | |
603 | RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch | |
604 | files are a bit different) | |
19330705 LOK |
605 | * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to |
606 | cec-client's parameters | |
dfb08039 LOK |
607 | * handle image view on and text view on |
608 | * handle routing information and report physical address opcodes | |
609 | * handle audio status updates | |
610 | * send ping and bootloader commands via the output queue | |
611 | * scan the CEC bus for devices when starting libcec | |
612 | * pass all commands that are directed at libcec to listeners | |
613 | * interface changes: | |
614 | * added GetActiveSource()/cec_get_active_source() | |
615 | * added IsActiveSource()/cec_is_active_source() | |
616 | * added GetDevicePhysicalAddress()/cec_get_device_physical_address() | |
617 | * added GetDeviceOSDName()/cec_get_osd_name() | |
618 | * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/ | |
619 | cec_send_key_release() | |
620 | * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(), | |
621 | MuteAudio()/cec_mute_audio() | |
622 | * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/ | |
623 | cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type(). | |
624 | * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load | |
625 | and when a device with the same physical address is detected, libcec will | |
626 | use the selected hdmi port on that device. should fix source selection on | |
627 | other devices, like an amplifier | |
628 | * added a hook in libcec for physical address autodetection | |
629 | * fixed: | |
630 | * don't request the physical address from the tv (it's always 0x0000) | |
631 | * set the proper ackmask before doing anything else | |
632 | * don't unlock the transmit mutex in CCECProcessor while waiting for an | |
633 | answer | |
634 | * fix device polling | |
635 | * refactor CEC read/write. keep a single lock for all writes, not one per | |
636 | device | |
637 | * ignore other data while waiting for a response | |
638 | * retry failed tranmissions | |
639 | * don't delete a message before it's been sent when starting the bootloader | |
640 | * or when sending a ping | |
641 | * fixed possible segfault when switching the command handler after a vendor | |
642 | * id changed | |
643 | * handle audio opcodes correctly | |
644 | * inactive source should be directly addressed at the TV | |
645 | * don't report a changed physical address when it hasn't changed | |
646 | * routing information sets the stream path, not the physical address | |
647 | * don't scan the whole bus in CCECProcessor::IsActiveDeviceType() | |
648 | * don't request the vendor id from devices that are handled by libcec | |
649 | * mark device status as present when a command was received from a device | |
650 | * always send a power on command in CCECBusDevice::PowerOn() | |
651 | * don't request updates statusses unless needed | |
652 | * report physical address sends 3 parameters, not 2. check whether the | |
653 | device type is correct | |
654 | * devices can send vendor commands from other vendors, so don't assume the | |
655 | device is of a certain vendor when it sends commands with a vendor id | |
656 | * thread safety fixes. bugzid: 19 | |
657 | * clear any previous input when opening a connection to the adapter. | |
658 | bugzid: 54 | |
659 | * use the correct source address in CSLCommandHandler::HandleVendorCommand() | |
660 | * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5 | |
661 | * renamed enum methods. fixes potential macro collision with isset(). | |
662 | thanks davilla | |
19330705 LOK |
663 | * don't change the active device when receiving stream path changed |
664 | messages. fixes wrong source selection when powering after the TV. | |
dfb08039 | 665 | |
19330705 | 666 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 09 Dec 2011 12:16:00 +0100 |
dfb08039 | 667 | |
94d98b71 LOK |
668 | libcec (1.2-1) unstable; urgency=low |
669 | ||
670 | * bugfixes: | |
671 | * pass the deck_control command to libcec listeners | |
672 | * check whether the initiator is valid in CCECProcessor::ParseCommand(). | |
673 | fixes possible segfault when parsing invalid data | |
674 | ||
675 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sat, 12 Nov 2011 13:36:00 +0100 | |
676 | ||
c3da3073 LOK |
677 | libcec (1.1-3) unstable; urgency=low |
678 | ||
679 | * fixed return value in CCECProcessor::SetStreamPath(), which prevented | |
680 | active source and menu state from being sent | |
681 | ||
682 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 23:36:00 +0100 | |
683 | ||
f0197d4f LOK |
684 | libcec (1.1-2) unstable; urgency=low |
685 | ||
686 | * forgot to update the headers to v1.1 | |
687 | ||
688 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 18:56:00 +0100 | |
689 | ||
4f8dcef2 LOK |
690 | libcec (1.1-1) unstable; urgency=low |
691 | ||
692 | * interface changes: | |
693 | * added logical address autodetection and let libcec handle multiple types | |
694 | simultaniously. for logical address autodetection, you have to use | |
695 | CECInit()/cec_init_typed() instead of CECCreate()/cec_init() | |
696 | * added SetActiveSource()/cec_set_active_source() to the interface. | |
697 | deprecated SetActiveView()/cec_set_active_view() | |
698 | * added SetMenuState() | |
699 | * added PollDevice()/cec_poll_device() | |
700 | * removed duplicate method SetActiveSource() / SetActiveView() | |
701 | * added SetDeckControlMode() and SetDeckInfo() | |
702 | * fixed: | |
703 | * added vendor detection for panasonic and broadcast active view and set | |
704 | menu state when a panasonic device sets the stream path. thanks for the | |
705 | pointer cptcoconut. | |
706 | * added vendor code for pioneer | |
707 | * osd string is 13 chars max. don't send more | |
708 | * send the correct cec version for each device | |
709 | * switch to panasonic specific cec implementation if a panasonic device was | |
710 | detected | |
711 | * send the correct device type in TransmitPhysicalAddress() | |
712 | * send a reply from the correct device when the stream path is requested | |
713 | * opcode 0x80 means the stream path changed, not the physical address | |
714 | * don't poll for a vendor ID in monitoring mode | |
715 | * fixed parameter parsing in SetVendorId() | |
716 | * buffer up commands that are received while waiting for an ack. only send | |
717 | 'active source' message for the actual active source | |
718 | * win32: prepend the com port path with '\\.\', so com ports > 9 can be | |
719 | accessed. thanks smolesen | |
720 | * audio systems cannot be an active source, so don't transmit active | |
721 | source message from this device | |
722 | * only send 'active source' when powered on | |
723 | * only set the osd name for the primary device. use default values for | |
724 | others | |
725 | * increase physical address with 0x100 per device | |
726 | * win32: removed unneeded afxres.h include in the resource files, which | |
727 | is not present when using studio express. thanks Ghuron | |
728 | * fixed C headers | |
729 | * mark the active source as active and other devices as inactive | |
730 | * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER | |
c6b7b98b | 731 | * transmit the menu state as (active) when the stream path is set |
4f8dcef2 LOK |
732 | * changed: |
733 | * changed copyright of boblight files with permission of the original | |
734 | author | |
735 | * partial handling of audio related opcodes | |
736 | * more consistent log messages | |
737 | * set a device type and name for each CCECBusDevice | |
738 | * keep a power and menu state per device | |
739 | * renamed all Broadcast...() and Report...() methods to Transmit...() | |
740 | * renamed SetOSDString() to TransmitOSDString() | |
741 | * changed debug level of 'did not receive ack' from error to debug | |
742 | * only set the power status to 'on' for the primary device | |
743 | * moved method decriptions from cecc.h to cec.h | |
744 | * only send a power on command when a device isn't on already and set | |
745 | the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while | |
746 | powering on | |
747 | * handle CEC_OPCODE_STANDBY | |
748 | * handle CEC_OPCODE_ACTIVE_SOURCE | |
749 | * always start in standby mode and let the tv (or other device) send the | |
750 | power on command | |
751 | * renamed the last few enums | |
752 | * handle deck related opcodes. | |
753 | * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown' | |
754 | ||
755 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 11 Nov 2011 17:42:00 +0100 | |
756 | ||
35d9c32a LOK |
757 | libcec (1.0-1) unstable; urgency=low |
758 | ||
759 | * interface changes: | |
760 | * set lib interface version back to 1.0 and rename GetLibVersion() to | |
761 | GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion() | |
762 | * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor | |
763 | version number to 1 | |
764 | * fixed: | |
765 | * samsung's vendor specific remote keypresses don't send key releases. added | |
766 | call to AddKey() directly after the keypress | |
767 | * always reset the button press time in CLibCEC::AddKey() | |
768 | * always wait for a signal in CCECProcessor::Transmit() | |
769 | * changed: | |
770 | * drop shared_ptr and use a normal pointer. removed boost dependency | |
771 | ||
772 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 04 Nov 2011 00:14:00 +0100 | |
773 | ||
b3efc8f2 LOK |
774 | libcec (0.8-2) unstable; urgency=low |
775 | ||
776 | * added 'libboost-dev' to build deps | |
777 | ||
778 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 23:31:00 +0100 | |
779 | ||
971d0e9e LOK |
780 | libcec (0.8-1) unstable; urgency=low |
781 | ||
782 | * interface changes: | |
783 | * added GetDevicePowerStatus()/cec_get_device_power_status() | |
784 | * added GetDeviceVendorId()/cec_get_device_vendor_id() | |
785 | * added GetDeviceMenuLanguage()/cec_get_device_menu_language() | |
786 | * added GetDeviceCecVersion()/cec_get_device_cec_version() | |
787 | * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when | |
b3efc8f2 LOK |
788 | monitoring is enabled, the device will only log the data it received, |
789 | but will not respond to any message | |
971d0e9e | 790 | * removed timeout parameter in Transmit() and included the ack timeout in |
b3efc8f2 | 791 | the cec_command struct |
971d0e9e LOK |
792 | * made the vendor id -> vendor name translation available |
793 | * made CEC_LOG levels powers of 2 | |
794 | * introduced CEC_LOG_TRAFFIC log level | |
795 | * fixed: | |
796 | * set the correct ackmask on startup | |
797 | * wait for ack while keeping a lock | |
798 | * wait for the processor thread to start before continueing on startup | |
799 | * wait for messages to be transmitted before continueing in | |
b3efc8f2 | 800 | CCECProcessor::Transmit() |
971d0e9e LOK |
801 | * only set the logical address once when it has changed |
802 | * correct source for broadcast messages | |
803 | * win32: create Release type installer | |
804 | * changed: | |
805 | * make all reads and write in CAdapterCommunication go through buffers. | |
806 | * poll for a vendor ID of connected devices and switch to a non-standard | |
b3efc8f2 | 807 | CEC implementation if needed. |
971d0e9e LOK |
808 | * added vendor detection of Samsung and LG devices |
809 | * handle samsung remote command 'return' | |
810 | * cec-client: | |
811 | * added -la and --logical-address to the command line params | |
812 | * added -d and --log-level params to cec-client | |
813 | * added -sf and --short-log-file, which only log the actual messages, not | |
b3efc8f2 | 814 | the level and timestamp |
971d0e9e LOK |
815 | * added -f and --log-file parameters to cec-client |
816 | * added option to change the log level to cec-client | |
817 | ||
b3efc8f2 | 818 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 01 Nov 2011 22:58:00 +0100 |
971d0e9e | 819 | |
8f084f00 LOK |
820 | libcec (0.7-1) unstable; urgency=low |
821 | ||
822 | * send a keypress with 0 duration when a key is pressed and with a duration | |
823 | set when it's released | |
824 | * added SetOSDString() to the interface (not supported by all tvs) | |
825 | * fixed: 'routing change' is a broadcast message. log routing changes, but | |
826 | don't send a 'set active view' message, so the active input won't be | |
827 | changed | |
828 | * log keypresses in the debug log | |
829 | * added 'pa' command to cec-client, to change the physical address | |
830 | * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so | |
831 | the HDMI port number to use can be changed | |
832 | * fixed: put the message processing code from WaitForAck() in ParseMessage(). | |
833 | fixes missing incoming message logging of non-data messages when not | |
834 | waiting for an ACK | |
835 | * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK | |
836 | before returning | |
837 | * fixed: set initiator and destination first in cec_command::push_back(). | |
838 | fixes 'tx' command in cec-client | |
839 | * fixed: keep trying to connect while iTimeout isn't reached (default 10 | |
840 | seconds). fixes exit with a 'permission denied' error when the device isn't | |
841 | ready yet. remove CEC_SETTLE_DOWN_TIME | |
842 | * fixed: don't call SetActiveView() when reporting the power status. fixes | |
843 | loop which causes some TVs to report failed connections | |
844 | * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed. | |
845 | * fixed: add the device type as parameter when sending the physical address. | |
846 | thanks bobo1on1 | |
847 | * fixed: typo in libcec.pc.in | |
848 | * added optional strLib parameter to LoadLibCec(), so the location of the | |
849 | shared library can be specified | |
850 | * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB | |
851 | * use int instead of bool on the public C interface and remove stdbool.h include | |
852 | * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h => | |
853 | cecloader.h, CECTypes.h => cectypes.h | |
854 | * updated debian package. split up libcec and libcec-dev | |
855 | * fixed: changed to use dlopen instead of static linkage. shuffled headers a | |
856 | bit. bumped interface to version 7 | |
857 | * removed 'rt' from libraries. it's not needed (anymore) | |
858 | * fixed: reset the active view after a routing change. issue #1 | |
859 | * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an | |
860 | error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear | |
861 | * added contributors link | |
862 | ||
863 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 14 Oct 2011 17:34:00 +0200 | |
864 | ||
11d0a2d6 LOK |
865 | libcec (0.6-1) unstable; urgency=low |
866 | ||
867 | * bumped interface version to 6 | |
868 | * fixed packet output (reporting the OSD name correctly now) | |
869 | * refactored packet structs: split up in cec commands and adapter messages | |
870 | * fixed i/o timings | |
871 | * added Darwin support (thanks Davilla!) | |
872 | * fixed WaitForAck() | |
873 | * fixed possible deadlock when starting a new thread | |
874 | * implemented vendor id and device class parsing. full detection will follow | |
875 | * added "on" and "standby" commands to the test client | |
876 | * retransmit packets if needed | |
877 | * fix GetTimeMs() on linux | |
878 | * added timestamp to log messages | |
879 | ||
880 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 09 Oct 2011 15:15:00 +0200 | |
881 | ||
9519c249 | 882 | libcec (0.5-1) unstable; urgency=low |
25701fa6 LOK |
883 | |
884 | * bumped interface version to 5 | |
885 | * don't pass std::string and std::vector accross the interface | |
886 | * fixed heap corruption crashes on windows | |
887 | * fixed some memory leaks | |
888 | * reset all structs to default values before doing with them | |
889 | ||
11d0a2d6 | 890 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 07 Oct 2011 22:00:00 +0200 |
25701fa6 | 891 | |
262f3b05 LOK |
892 | libcec (0.4-3) unstable; urgency=low |
893 | ||
894 | * fixed reconnect | |
895 | * fixed some threading related bugs | |
896 | * fixed deadlock on exit | |
897 | * fixed wrongly reported physical address | |
898 | ||
899 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 06 Oct 2011 00:19:00 +0200 | |
900 | ||
4463fb80 LOK |
901 | libcec (0.4-2) unstable; urgency=low |
902 | ||
903 | * fixed int parameter sizes and some signed/unsigned warnings | |
904 | * check whether m_port isn't NULL in ReadFromDevice | |
905 | * stop the processor thread and delete the CSerialPort instance on exit | |
906 | * added mutex in CSerialPort | |
907 | * fix segfault on exit | |
908 | * renamed libPlatform -> platform. | |
909 | * stuck everything from libCEC in the CEC namespace to avoid namespace | |
910 | polution | |
911 | ||
912 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 23:45:00 +0200 | |
913 | ||
88c5a743 LOK |
914 | libcec (0.4-1) unstable; urgency=low |
915 | ||
916 | * bumped interface version to 4 | |
917 | * timeout parameter removed from Close()/cec_close(). return type changed to | |
918 | void | |
919 | * added cec_destroy() method | |
920 | * removed timeout parameter from Transmit() | |
921 | * change the default argument of PowerOnDevices() to CECDEVICE_TV | |
922 | * removed PowerOffDevices(). use StandbyDevices() instead | |
923 | * removed obsolete methods from the interface | |
924 | * fixed bug: pthread_cond_wait was called without the mutex locked | |
925 | * fixed possible deadlock: don't send messages and wait for an ack with the | |
926 | mutex locked in CCECParser | |
927 | * created a separate reader thread and fixed the 'lock timeout' bug | |
928 | * testclient: use CECDEVICE_TV instead of the default argument | |
929 | (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices() | |
930 | ||
931 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Tue, 04 Oct 2011 00:48:00 +0200 | |
932 | ||
a9bb5b56 LOK |
933 | libcec (0.3-1) unstable; urgency=low |
934 | ||
935 | * added device detection support for Windows | |
936 | ||
937 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Sun, 02 Oct 2011 12:09:33 +0200 | |
938 | ||
939 | libcec (0.2-1) unstable; urgency=low | |
940 | ||
941 | * added a Close() method to the interface | |
942 | * Added CEC command that were received by the adapter in a buffer that can be | |
943 | read by a client with GetNextCommand()/cec_get_next_command(). added a | |
944 | 'help' command to the test client, that displays all available commands | |
945 | * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use | |
946 | SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to | |
947 | the testclient to set the logical address of the cec adapter | |
948 | * Added optional logical and physical address parameters to | |
949 | LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace | |
950 | close tag in CECExports.h. updated interface documentation. bumped | |
951 | interface version to 2. | |
952 | * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the | |
953 | test client. the previous one was too long and being rejected | |
954 | ||
955 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Fri, 28 Sep 2011 01:33:00 +0200 | |
956 | ||
abbca718 LOK |
957 | libcec (0.1-1) unstable; urgency=low |
958 | ||
959 | * Initial release v0.1 | |
960 | ||
a9bb5b56 | 961 | -- Pulse-Eight Packaging <packaging@pulse-eight.com> Wed, 28 Sep 2011 23:55:48 +0200 |