ChangeLog

   1 libcec (1.3-3) unstable; urgency=low
   2
   3    * changed/added:
   4      * place in libudev include in an extern C block. fixes compilations on
   5        older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann
   6      * added pkg-config to the dependencies list. issue #15
   7      * updated README. closes #14
   8      * added a script that tests some basic functions of the CEC adapter:
   9        /support/cec-test-device.sh
  10    * fixed:
  11      * don't make libCEC the active source when changing the physical address.
  12        don't send active source messages on startup, when not the active source
  13        fixes unwanted device power ups
  14      * replace the command handler directly after receiving a changed vendor
  15        id. change the primary type from recording device to playback device
  16        for panasonic TVs
  17      * don't send a deck status update when sending an active source message
  18        for panasonic TVs
  19      * only switch handlers once when using the generic handler
  20      * don't switch handlers when not needed
  21      * hold a lock in CCECProcessor::SetHDMIPort()
  22      * don't send deck status updates when sending an active source message by
  23        default
  24
  25  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 3 Jan 2012 22:48:00 +0100
  26
  27 libcec (1.3-2) unstable; urgency=low
  28
  29    * changed/added:
  30      * copy libcec.dll to the XBMC installation dir when XBMC is found
  31      * disable background polling. let the client request this info when needed
  32      * update the power status of a device when it's set to
  33        CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON
  34      * wait for the correct response when requesting something, not just any
  35        response
  36      * don't keep trying the same command/request after receiving a feature
  37        abort message
  38    * interface changes:
  39      * change the previously unused boolean parameter in volume control methods
  40        to bSendRelease, and only send a key release when it's true. default to
  41        true
  42    * fixed:
  43      * don't send the power up/down keypress to listeners when in the initial
  44        device state (powered off). fixes unexpected shutdown in XBMC when
  45        connecting to the CEC adapter.
  46      * send a 'menu state activated' command when starting up. bugzid: 113
  47      * don't wait for a response when not needed
  48      * don't hold a lock while waiting for a response. fixes failed libCEC
  49        inits and slow responses
  50      * don't replace a command handler when it's being used. fixes possible
  51        crash on startup
  52      * don't try to do anything before the processor thread has started
  53      * don't transmit active source messages when the physical address is
  54        still 0xFFFF
  55      * don't init the default handler before the physical address is known
  56
  57  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 29 Dec 2011 03:05:00 +0100
  58
  59 libcec (1.3-1) unstable; urgency=low
  60
  61   * changed/added:
  62     * make libudev optional. if libudev is not available on linux, adapter
  63       autodetection will also not be available. fixes compilation on Hardy/ATV1
  64     * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET
  65       language
  66     * added vendor support for LG
  67     * added vendor support for Philips
  68     * added vendor support for Yamaha
  69     * added vendor support for Onkyo
  70     * added 'scan' command to cec-client, that displays info about devices on
  71       the bus. made all ToString() methods available on the interface.
  72     * added '-s' or '--single-command' to cec-client. starting cec-client with
  73       this parameter executes a single command in cec-client and does not power
  74       on devices on startup and power them off on exit. this way, you can use
  75       cec-client in a shell script. since there's some handshaking involved at
  76       startup, this is not very fast. to execute a command and only display the
  77       result and any error/warning, execute it with
  78       RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch
  79       files are a bit different)
  80     * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to
  81       cec-client's parameters
  82     * handle image view on and text view on
  83     * handle routing information and report physical address opcodes
  84     * handle audio status updates
  85     * send ping and bootloader commands via the output queue
  86     * scan the CEC bus for devices when starting libcec
  87     * pass all commands that are directed at libcec to listeners
  88   * interface changes:
  89     * added GetActiveSource()/cec_get_active_source()
  90     * added IsActiveSource()/cec_is_active_source()
  91     * added GetDevicePhysicalAddress()/cec_get_device_physical_address()
  92     * added GetDeviceOSDName()/cec_get_osd_name()
  93     * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/
  94       cec_send_key_release()
  95     * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(),
  96       MuteAudio()/cec_mute_audio()
  97     * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/
  98       cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type().
  99     * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load
 100       and when a device with the same physical address is detected, libcec will
 101       use the selected hdmi port on that device. should fix source selection on
 102       other devices, like an amplifier
 103     * added a hook in libcec for physical address autodetection
 104   * fixed:
 105     * don't request the physical address from the tv (it's always 0x0000)
 106     * set the proper ackmask before doing anything else
 107     * don't unlock the transmit mutex in CCECProcessor while waiting for an
 108       answer
 109     * fix device polling
 110     * refactor CEC read/write. keep a single lock for all writes, not one per
 111       device
 112     * ignore other data while waiting for a response
 113     * retry failed tranmissions
 114     * don't delete a message before it's been sent when starting the bootloader
 115     * or when sending a ping
 116     * fixed possible segfault when switching the command handler after a vendor
 117     * id changed
 118     * handle audio opcodes correctly
 119     * inactive source should be directly addressed at the TV
 120     * don't report a changed physical address when it hasn't changed
 121     * routing information sets the stream path, not the physical address
 122     * don't scan the whole bus in CCECProcessor::IsActiveDeviceType()
 123     * don't request the vendor id from devices that are handled by libcec
 124     * mark device status as present when a command was received from a device
 125     * always send a power on command in CCECBusDevice::PowerOn()
 126     * don't request updates statusses unless needed
 127     * report physical address sends 3 parameters, not 2. check whether the
 128       device type is correct
 129     * devices can send vendor commands from other vendors, so don't assume the
 130       device is of a certain vendor when it sends commands with a vendor id
 131     * thread safety fixes. bugzid: 19
 132     * clear any previous input when opening a connection to the adapter.
 133       bugzid: 54
 134     * use the correct source address in CSLCommandHandler::HandleVendorCommand()
 135     * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5
 136     * renamed enum methods. fixes potential macro collision with isset().
 137       thanks davilla
 138     * don't change the active device when receiving stream path changed
 139       messages. fixes wrong source selection when powering after the TV.
 140
 141  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 09 Dec 2011 12:16:00 +0100
 142
 143 libcec (1.2-1) unstable; urgency=low
 144
 145   * bugfixes:
 146     * pass the deck_control command to libcec listeners
 147     * check whether the initiator is valid in CCECProcessor::ParseCommand().
 148       fixes possible segfault when parsing invalid data
 149
 150  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sat, 12 Nov 2011 13:36:00 +0100
 151
 152 libcec (1.1-3) unstable; urgency=low
 153
 154   * fixed return value in CCECProcessor::SetStreamPath(), which prevented
 155     active source and menu state from being sent
 156
 157  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 23:36:00 +0100
 158
 159 libcec (1.1-2) unstable; urgency=low
 160
 161   * forgot to update the headers to v1.1
 162
 163  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 18:56:00 +0100
 164
 165 libcec (1.1-1) unstable; urgency=low
 166
 167   * interface changes:
 168     * added logical address autodetection and let libcec handle multiple types
 169       simultaniously. for logical address autodetection, you have to use
 170       CECInit()/cec_init_typed() instead of CECCreate()/cec_init()
 171     * added SetActiveSource()/cec_set_active_source() to the interface.
 172       deprecated SetActiveView()/cec_set_active_view()
 173     * added SetMenuState()
 174     * added PollDevice()/cec_poll_device()
 175     * removed duplicate method SetActiveSource() / SetActiveView()
 176     * added SetDeckControlMode() and SetDeckInfo()
 177   * fixed:
 178     * added vendor detection for panasonic and broadcast active view and set
 179       menu state when a panasonic device sets the stream path. thanks for the
 180       pointer cptcoconut.
 181     * added vendor code for pioneer
 182     * osd string is 13 chars max. don't send more
 183     * send the correct cec version for each device
 184     * switch to panasonic specific cec implementation if a panasonic device was
 185       detected
 186     * send the correct device type in TransmitPhysicalAddress()
 187     * send a reply from the correct device when the stream path is requested
 188     * opcode 0x80 means the stream path changed, not the physical address
 189     * don't poll for a vendor ID in monitoring mode
 190     * fixed parameter parsing in SetVendorId()
 191     * buffer up commands that are received while waiting for an ack. only send
 192       'active source' message for the actual active source
 193     * win32: prepend the com port path with '\\.\', so com ports > 9 can be
 194       accessed. thanks smolesen
 195     * audio systems cannot be an active source, so don't transmit active
 196       source message from this device
 197     * only send 'active source' when powered on
 198     * only set the osd name for the primary device. use default values for
 199       others
 200     * increase physical address with 0x100 per device
 201     * win32: removed unneeded afxres.h include in the resource files, which
 202       is not present when using studio express. thanks Ghuron
 203     * fixed C headers
 204     * mark the active source as active and other devices as inactive
 205     * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER
 206     * transmit the menu state as (active) when the stream path is set
 207   * changed:
 208     * changed copyright of boblight files with permission of the original
 209       author
 210     * partial handling of audio related opcodes
 211     * more consistent log messages
 212     * set a device type and name for each CCECBusDevice
 213     * keep a power and menu state per device
 214     * renamed all Broadcast...() and Report...() methods to Transmit...()
 215     * renamed SetOSDString() to TransmitOSDString()
 216     * changed debug level of 'did not receive ack' from error to debug
 217     * only set the power status to 'on' for the primary device
 218     * moved method decriptions from cecc.h to cec.h
 219     * only send a power on command when a device isn't on already and set
 220       the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while
 221       powering on
 222     * handle CEC_OPCODE_STANDBY
 223     * handle CEC_OPCODE_ACTIVE_SOURCE
 224     * always start in standby mode and let the tv (or other device) send the
 225       power on command
 226     * renamed the last few enums
 227     * handle deck related opcodes.
 228     * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown'
 229
 230  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 17:42:00 +0100
 231
 232 libcec (1.0-1) unstable; urgency=low
 233
 234   * interface changes:
 235     * set lib interface version back to 1.0 and rename GetLibVersion() to
 236       GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion()
 237     * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor
 238       version number to 1
 239   * fixed:
 240     * samsung's vendor specific remote keypresses don't send key releases. added
 241       call to AddKey() directly after the keypress
 242     * always reset the button press time in CLibCEC::AddKey()
 243     * always wait for a signal in CCECProcessor::Transmit()
 244   * changed:
 245     * drop shared_ptr and use a normal pointer. removed boost dependency
 246
 247  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 04 Nov 2011 00:14:00 +0100
 248
 249 libcec (0.8-2) unstable; urgency=low
 250
 251   * added 'libboost-dev' to build deps
 252
 253  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 01 Nov 2011 23:31:00 +0100
 254
 255 libcec (0.8-1) unstable; urgency=low
 256
 257   * interface changes:
 258     * added GetDevicePowerStatus()/cec_get_device_power_status()
 259     * added GetDeviceVendorId()/cec_get_device_vendor_id()
 260     * added GetDeviceMenuLanguage()/cec_get_device_menu_language()
 261     * added GetDeviceCecVersion()/cec_get_device_cec_version()
 262     * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when
 263       monitoring is enabled, the device will only log the data it received,
 264       but will not respond to any message
 265     * removed timeout parameter in Transmit() and included the ack timeout in
 266        the cec_command struct
 267     * made the vendor id -> vendor name translation available
 268     * made CEC_LOG levels powers of 2
 269     * introduced CEC_LOG_TRAFFIC log level
 270   * fixed:
 271     * set the correct ackmask on startup
 272     * wait for ack while keeping a lock
 273     * wait for the processor thread to start before continueing on startup
 274     * wait for messages to be transmitted before continueing in
 275       CCECProcessor::Transmit()
 276     * only set the logical address once when it has changed
 277     * correct source for broadcast messages
 278     * win32: create Release type installer
 279   * changed:
 280     * make all reads and write in CAdapterCommunication go through buffers.
 281     * poll for a vendor ID of connected devices and switch to a non-standard
 282       CEC implementation if needed.
 283     * added vendor detection of Samsung and LG devices
 284     * handle samsung remote command 'return'
 285   * cec-client:
 286     * added -la and --logical-address to the command line params
 287     * added -d and --log-level params to cec-client
 288     * added -sf and --short-log-file, which only log the actual messages, not
 289       the level and timestamp
 290     * added -f and --log-file parameters to cec-client
 291     * added option to change the log level to cec-client
 292
 293  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 01 Nov 2011 22:58:00 +0100
 294
 295 libcec (0.7-1) unstable; urgency=low
 296
 297   * send a keypress with 0 duration when a key is pressed and with a duration
 298     set when it's released
 299   * added SetOSDString() to the interface (not supported by all tvs)
 300   * fixed: 'routing change' is a broadcast message. log routing changes, but
 301     don't send a 'set active view' message, so the active input won't be
 302     changed
 303   * log keypresses in the debug log
 304   * added 'pa' command to cec-client, to change the physical address
 305   * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so
 306     the HDMI port number to use can be changed
 307   * fixed: put the message processing code from WaitForAck() in ParseMessage().
 308     fixes missing incoming message logging of non-data messages when not
 309     waiting for an ACK
 310   * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK
 311     before returning
 312   * fixed: set initiator and destination first in cec_command::push_back().
 313     fixes 'tx' command in cec-client
 314   * fixed: keep trying to connect while iTimeout isn't reached (default 10
 315     seconds). fixes exit with a 'permission denied' error when the device isn't
 316     ready yet. remove CEC_SETTLE_DOWN_TIME
 317   * fixed: don't call SetActiveView() when reporting the power status. fixes
 318     loop which causes some TVs to report failed connections
 319   * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed.
 320   * fixed: add the device type as parameter when sending the physical address.
 321     thanks bobo1on1
 322   * fixed: typo in libcec.pc.in
 323   * added optional strLib parameter to LoadLibCec(), so the location of the
 324     shared library can be specified
 325   * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB
 326   * use int instead of bool on the public C interface and remove stdbool.h include
 327   * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h =>
 328     cecloader.h, CECTypes.h => cectypes.h
 329   * updated debian package. split up libcec and libcec-dev
 330   * fixed: changed to use dlopen instead of static linkage. shuffled headers a
 331     bit. bumped interface to version 7
 332   * removed 'rt' from libraries. it's not needed (anymore)
 333   * fixed: reset the active view after a routing change. issue #1
 334   * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an
 335     error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear
 336   * added contributors link
 337
 338  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 14 Oct 2011 17:34:00 +0200
 339
 340 libcec (0.6-1) unstable; urgency=low
 341
 342   * bumped interface version to 6
 343   * fixed packet output (reporting the OSD name correctly now)
 344   * refactored packet structs: split up in cec commands and adapter messages
 345   * fixed i/o timings
 346   * added Darwin support (thanks Davilla!)
 347   * fixed WaitForAck()
 348   * fixed possible deadlock when starting a new thread
 349   * implemented vendor id and device class parsing. full detection will follow
 350   * added "on" and "standby" commands to the test client
 351   * retransmit packets if needed
 352   * fix GetTimeMs() on linux
 353   * added timestamp to log messages
 354
 355  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sun, 09 Oct 2011 15:15:00 +0200
 356
 357 libcec (0.5-1) unstable; urgency=low
 358
 359   * bumped interface version to 5
 360   * don't pass std::string and std::vector accross the interface
 361   * fixed heap corruption crashes on windows
 362   * fixed some memory leaks
 363   * reset all structs to default values before doing with them
 364
 365  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 07 Oct 2011 22:00:00 +0200
 366
 367 libcec (0.4-3) unstable; urgency=low
 368
 369   * fixed reconnect
 370   * fixed some threading related bugs
 371   * fixed deadlock on exit
 372   * fixed wrongly reported physical address
 373
 374  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 06 Oct 2011 00:19:00 +0200
 375
 376 libcec (0.4-2) unstable; urgency=low
 377
 378   * fixed int parameter sizes and some signed/unsigned warnings
 379   * check whether m_port isn't NULL in ReadFromDevice
 380   * stop the processor thread and delete the CSerialPort instance on exit
 381   * added mutex in CSerialPort
 382   * fix segfault on exit
 383   * renamed libPlatform -> platform.
 384   * stuck everything from libCEC in the CEC namespace to avoid namespace
 385     polution
 386
 387  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 04 Oct 2011 23:45:00 +0200
 388
 389 libcec (0.4-1) unstable; urgency=low
 390
 391   * bumped interface version to 4
 392   * timeout parameter removed from Close()/cec_close(). return type changed to
 393     void
 394   * added cec_destroy() method
 395   * removed timeout parameter from Transmit()
 396   * change the default argument of PowerOnDevices() to CECDEVICE_TV
 397   * removed PowerOffDevices(). use StandbyDevices() instead
 398   * removed obsolete methods from the interface
 399   * fixed bug: pthread_cond_wait was called without the mutex locked
 400   * fixed possible deadlock: don't send messages and wait for an ack with the
 401     mutex locked in CCECParser
 402   * created a separate reader thread and fixed the 'lock timeout' bug
 403   * testclient: use CECDEVICE_TV instead of the default argument
 404     (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices()
 405
 406  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 04 Oct 2011 00:48:00 +0200
 407
 408 libcec (0.3-1) unstable; urgency=low
 409
 410   * added device detection support for Windows
 411
 412  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sun, 02 Oct 2011 12:09:33 +0200
 413
 414 libcec (0.2-1) unstable; urgency=low
 415
 416   * added a Close() method to the interface
 417   * Added CEC command that were received by the adapter in a buffer that can be
 418     read by a client with GetNextCommand()/cec_get_next_command(). added a
 419     'help' command to the test client, that displays all available commands
 420   * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use
 421     SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to
 422     the testclient to set the logical address of the cec adapter
 423   * Added optional logical and physical address parameters to
 424     LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace
 425     close tag in CECExports.h. updated interface documentation. bumped
 426     interface version to 2.
 427   * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the
 428     test client. the previous one was too long and being rejected
 429
 430  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 28 Sep 2011 01:33:00 +0200
 431
 432 libcec (0.1-1) unstable; urgency=low
 433
 434   * Initial release v0.1
 435
 436  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Wed, 28 Sep 2011 23:55:48 +0200