ChangeLog

   1 libcec (1.4-4) unstable; urgency=low
   2
   3   * changed/added:
   4     * added tcp client sockets to lib/platform (WIP)
   5     * clean up lib/platform
   6     * added: set controlled mode on after opening a connection to the adapter
   7       (for firmware v2)
   8     * added an IAdapterCommunicationCallback interface an use a callback method
   9       to pass newly received cec_commands to CCECProcessor
  10     * added "driver only" and "driver + libcec" sections to the installer
  11     * added a signed driver
  12     * created a separate driver installer, which is included in the libCEC
  13       installer. uninstalls the old unsigned version of libCEC and the driver
  14       when it's found and installs the new one in C:\Program Files(x86)\
  15       Pulse Eight\USB-CEC Adapter.
  16     * don't sign development binaries with a temporary key. devs can do that
  17       themselves when they want LibCecSharp in the GAC
  18   * interface changes:
  19     * added SetStreamPath()/cec_set_stream_path_logical()/
  20       cec_set_stream_path_physical() to the interface, to send a
  21       "set stream path" command over the CEC bus, used to activate another
  22       source.
  23   * fixed:
  24     * transmit 'menu state activated' after the stream path has been set to a
  25       device that is handled by libCEC. should fix remote commands not working
  26       properly on Panasonic TVs and after another source has been active.
  27       bugzid: 233
  28     * set the ackmask to 0x0 when trying to find a free logical address
  29     * keep trying to reconnect to the com port until the timeout runs out.
  30       bugzid: 230
  31     * wait 500 ms before trying to retransmit a command. always wait for the
  32       result of a transmission in CCECCommandHandler::Transmit()
  33     * receive and send full cec_commands, not CCECAdapterMessages in
  34       CAdapterCommunication. extract an IAdapterCommunication interface. fixed
  35       potentially missed data in CAdapterCommunication
  36     * close and delete the connection when the processor thread ends. fixes
  37       reconnect after standby (access denied / connection already opened)
  38     * don't replace handlers when not initialised, or the primary device's
  39       logical addres isn't known yet, which can lead to crashes. don't call
  40       handlers directly in CCECProcessor without holding a lock on them
  41     * fixed possible crash when command handler were switched while it was
  42       being used
  43     * keep the mutex locked when calling ReplaceHandlers() in CCECProcessor
  44     * win32: also timeout when data is received in SocketRead()
  45     * win32: fixed < vista runtime and compilation
  46     * win32: ping the adapter and request the firmware version in
  47       CUSBCECAdapterCommunication instead of CCECProcesssor. fixes failed
  48       libCEC inits
  49     * win32: fixed crash on exit in LibCecSharp
  50
  51  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Mon, 6 Feb 2012 14:26:00 +0100
  52
  53 libcec (1.4-3) unstable; urgency=low
  54
  55   * fixed:
  56     * try to ping the device and grab the firmware version until the connect
  57       timeout runs out. fixes failed reconnect after standby, when the adapter
  58       is still being initialised
  59
  60  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 27 Jan 2012 13:05:00 +0100
  61
  62 libcec (1.4-2) unstable; urgency=low
  63
  64    * changed/added:
  65      * added a firmware flash script for linux.
  66        usage: ./support/cec-flash-device.sh /path/to/firware.hex
  67      * refactored threading/locking - added windows native instead of
  68        pthread-win32, so we can compile native x64 too
  69      * check whether the adapter responds when connecting to it and report the
  70        firmware version of the adapter after connecting
  71      * moved create-installer.cmd to support/
  72      * completely removed AM_SILENT_RULES
  73    * interface changes:
  74      * compile LibCecSharp against .NET framework 2.0 and sign the assembly
  75    * fixed:
  76     * only the key release events were sent, not keypresses, which appeared in
  77       clients as laggy keypresses
  78     * fixed reconnect after standby
  79     * wait for active tranmission to finish when opening a connection to the
  80       adapter. fixes initialisation errors
  81     * set the default transmit timeout properly instead of using 0
  82     * fixed possible deadlock because of a negative timeout in
  83       CAdapterCommunication::WaitForTransmitSucceeded()
  84     * fixed error message in cec-client (unable to open the device on port ...)
  85     * exit cec-client after entering bootloader mode
  86     * MSGCODE_START_BOOTLOADER doesn't respond with MSGCODE_COMMAND_ACCEPTED
  87
  88  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 25 Jan 2012 23:28:00 +0100
  89
  90 libcec (1.4-1) unstable; urgency=low
  91
  92    * changed/added:
  93      * added the vendor id for Sony
  94      * always refresh the power state of a device when it hasn't been updated
  95        for 30 seconds
  96      * do silent builds by default
  97    * interface changes:
  98      * added optional callback methods to libCEC. enable them by calling
  99        EnableCallbacks(ICECCallbacks *callbacks) /
 100        cec_enable_callbacks(ICECCallbacks *callbacks). after this method is
 101        called, the GetNext...() methods will not return any data
 102      * added the same callbacks to LibCecSharp. implement CecCallbackMethods
 103        and override the methods in there
 104    * fixed:
 105      * use the given timeout when trying to open a connection to the CEC
 106        adapter
 107      * resolved difference between method name in LibCECC.cpp and cecc.h.
 108        credits: Doug Johnson
 109      * don't transmit physical addresses while holding a lock in CCECProcessor
 110      * don't hold a lock when sending an active source message.
 111      * unload libCEC when the lib version is invalid
 112      * "unused" warnings suppressed
 113
 114  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 12 Jan 2012 19:06:00 +0100
 115
 116 libcec (1.3-3) unstable; urgency=low
 117
 118    * changed/added:
 119      * place in libudev include in an extern C block. fixes compilations on
 120        older libudev versions (e.g. on Hardy). closes #2. credits @fbuenemann
 121      * added pkg-config to the dependencies list. issue #15
 122      * updated README. closes #14
 123      * added a script that tests some basic functions of the CEC adapter:
 124        /support/cec-test-device.sh
 125    * fixed:
 126      * don't make libCEC the active source when changing the physical address.
 127        don't send active source messages on startup, when not the active source
 128        fixes unwanted device power ups
 129      * replace the command handler directly after receiving a changed vendor
 130        id. change the primary type from recording device to playback device
 131        for panasonic TVs
 132      * don't send a deck status update when sending an active source message
 133        for panasonic TVs
 134      * only switch handlers once when using the generic handler
 135      * don't switch handlers when not needed
 136      * hold a lock in CCECProcessor::SetHDMIPort()
 137      * don't send deck status updates when sending an active source message by
 138        default
 139
 140  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 3 Jan 2012 22:48:00 +0100
 141
 142 libcec (1.3-2) unstable; urgency=low
 143
 144    * changed/added:
 145      * copy libcec.dll to the XBMC installation dir when XBMC is found
 146      * disable background polling. let the client request this info when needed
 147      * update the power status of a device when it's set to
 148        CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON
 149      * wait for the correct response when requesting something, not just any
 150        response
 151      * don't keep trying the same command/request after receiving a feature
 152        abort message
 153    * interface changes:
 154      * change the previously unused boolean parameter in volume control methods
 155        to bSendRelease, and only send a key release when it's true. default to
 156        true
 157    * fixed:
 158      * don't send the power up/down keypress to listeners when in the initial
 159        device state (powered off). fixes unexpected shutdown in XBMC when
 160        connecting to the CEC adapter.
 161      * send a 'menu state activated' command when starting up. bugzid: 113
 162      * don't wait for a response when not needed
 163      * don't hold a lock while waiting for a response. fixes failed libCEC
 164        inits and slow responses
 165      * don't replace a command handler when it's being used. fixes possible
 166        crash on startup
 167      * don't try to do anything before the processor thread has started
 168      * don't transmit active source messages when the physical address is
 169        still 0xFFFF
 170      * don't init the default handler before the physical address is known
 171
 172  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 29 Dec 2011 03:05:00 +0100
 173
 174 libcec (1.3-1) unstable; urgency=low
 175
 176   * changed/added:
 177     * make libudev optional. if libudev is not available on linux, adapter
 178       autodetection will also not be available. fixes compilation on Hardy/ATV1
 179     * added a C++ CLR wrapper for libCEC, so libCEC can be used by any .NET
 180       language
 181     * added vendor support for LG
 182     * added vendor support for Philips
 183     * added vendor support for Yamaha
 184     * added vendor support for Onkyo
 185     * added 'scan' command to cec-client, that displays info about devices on
 186       the bus. made all ToString() methods available on the interface.
 187     * added '-s' or '--single-command' to cec-client. starting cec-client with
 188       this parameter executes a single command in cec-client and does not power
 189       on devices on startup and power them off on exit. this way, you can use
 190       cec-client in a shell script. since there's some handshaking involved at
 191       startup, this is not very fast. to execute a command and only display the
 192       result and any error/warning, execute it with
 193       RESULT=`echo command | cec-client -s -d 3` (on linux/osx, win32 batch
 194       files are a bit different)
 195     * added HDMI port ('-p' or '--port') and base device ('-b' or '--base') to
 196       cec-client's parameters
 197     * handle image view on and text view on
 198     * handle routing information and report physical address opcodes
 199     * handle audio status updates
 200     * send ping and bootloader commands via the output queue
 201     * scan the CEC bus for devices when starting libcec
 202     * pass all commands that are directed at libcec to listeners
 203   * interface changes:
 204     * added GetActiveSource()/cec_get_active_source()
 205     * added IsActiveSource()/cec_is_active_source()
 206     * added GetDevicePhysicalAddress()/cec_get_device_physical_address()
 207     * added GetDeviceOSDName()/cec_get_osd_name()
 208     * added SendKeypress()/cec_send_keypress() and SendKeyRelease()/
 209       cec_send_key_release()
 210     * added VolumeUp()/cec_volume_up(), VolumeDown()/cec_volume_down(),
 211       MuteAudio()/cec_mute_audio()
 212     * added GetActiveDevices()/cec_get_active_devices(), IsActiveDevice()/
 213       cec_is_active_device(), IsActiveDeviceType()/cec_is_active_device_type().
 214     * added SetHDMIPort()/cec_set_hdmi_port(). devices are now detected on load
 215       and when a device with the same physical address is detected, libcec will
 216       use the selected hdmi port on that device. should fix source selection on
 217       other devices, like an amplifier
 218     * added a hook in libcec for physical address autodetection
 219   * fixed:
 220     * don't request the physical address from the tv (it's always 0x0000)
 221     * set the proper ackmask before doing anything else
 222     * don't unlock the transmit mutex in CCECProcessor while waiting for an
 223       answer
 224     * fix device polling
 225     * refactor CEC read/write. keep a single lock for all writes, not one per
 226       device
 227     * ignore other data while waiting for a response
 228     * retry failed tranmissions
 229     * don't delete a message before it's been sent when starting the bootloader
 230     * or when sending a ping
 231     * fixed possible segfault when switching the command handler after a vendor
 232     * id changed
 233     * handle audio opcodes correctly
 234     * inactive source should be directly addressed at the TV
 235     * don't report a changed physical address when it hasn't changed
 236     * routing information sets the stream path, not the physical address
 237     * don't scan the whole bus in CCECProcessor::IsActiveDeviceType()
 238     * don't request the vendor id from devices that are handled by libcec
 239     * mark device status as present when a command was received from a device
 240     * always send a power on command in CCECBusDevice::PowerOn()
 241     * don't request updates statusses unless needed
 242     * report physical address sends 3 parameters, not 2. check whether the
 243       device type is correct
 244     * devices can send vendor commands from other vendors, so don't assume the
 245       device is of a certain vendor when it sends commands with a vendor id
 246     * thread safety fixes. bugzid: 19
 247     * clear any previous input when opening a connection to the adapter.
 248       bugzid: 54
 249     * use the correct source address in CSLCommandHandler::HandleVendorCommand()
 250     * uncorrected CEC_OPCODE_DEVICE_VENDOR_ID. closes #5
 251     * renamed enum methods. fixes potential macro collision with isset().
 252       thanks davilla
 253     * don't change the active device when receiving stream path changed
 254       messages. fixes wrong source selection when powering after the TV.
 255
 256  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 09 Dec 2011 12:16:00 +0100
 257
 258 libcec (1.2-1) unstable; urgency=low
 259
 260   * bugfixes:
 261     * pass the deck_control command to libcec listeners
 262     * check whether the initiator is valid in CCECProcessor::ParseCommand().
 263       fixes possible segfault when parsing invalid data
 264
 265  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sat, 12 Nov 2011 13:36:00 +0100
 266
 267 libcec (1.1-3) unstable; urgency=low
 268
 269   * fixed return value in CCECProcessor::SetStreamPath(), which prevented
 270     active source and menu state from being sent
 271
 272  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 23:36:00 +0100
 273
 274 libcec (1.1-2) unstable; urgency=low
 275
 276   * forgot to update the headers to v1.1
 277
 278  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 18:56:00 +0100
 279
 280 libcec (1.1-1) unstable; urgency=low
 281
 282   * interface changes:
 283     * added logical address autodetection and let libcec handle multiple types
 284       simultaniously. for logical address autodetection, you have to use
 285       CECInit()/cec_init_typed() instead of CECCreate()/cec_init()
 286     * added SetActiveSource()/cec_set_active_source() to the interface.
 287       deprecated SetActiveView()/cec_set_active_view()
 288     * added SetMenuState()
 289     * added PollDevice()/cec_poll_device()
 290     * removed duplicate method SetActiveSource() / SetActiveView()
 291     * added SetDeckControlMode() and SetDeckInfo()
 292   * fixed:
 293     * added vendor detection for panasonic and broadcast active view and set
 294       menu state when a panasonic device sets the stream path. thanks for the
 295       pointer cptcoconut.
 296     * added vendor code for pioneer
 297     * osd string is 13 chars max. don't send more
 298     * send the correct cec version for each device
 299     * switch to panasonic specific cec implementation if a panasonic device was
 300       detected
 301     * send the correct device type in TransmitPhysicalAddress()
 302     * send a reply from the correct device when the stream path is requested
 303     * opcode 0x80 means the stream path changed, not the physical address
 304     * don't poll for a vendor ID in monitoring mode
 305     * fixed parameter parsing in SetVendorId()
 306     * buffer up commands that are received while waiting for an ack. only send
 307       'active source' message for the actual active source
 308     * win32: prepend the com port path with '\\.\', so com ports > 9 can be
 309       accessed. thanks smolesen
 310     * audio systems cannot be an active source, so don't transmit active
 311       source message from this device
 312     * only send 'active source' when powered on
 313     * only set the osd name for the primary device. use default values for
 314       others
 315     * increase physical address with 0x100 per device
 316     * win32: removed unneeded afxres.h include in the resource files, which
 317       is not present when using studio express. thanks Ghuron
 318     * fixed C headers
 319     * mark the active source as active and other devices as inactive
 320     * set the power status to 'on' when receiving CEC_USER_CONTROL_CODE_POWER
 321     * transmit the menu state as (active) when the stream path is set
 322   * changed:
 323     * changed copyright of boblight files with permission of the original
 324       author
 325     * partial handling of audio related opcodes
 326     * more consistent log messages
 327     * set a device type and name for each CCECBusDevice
 328     * keep a power and menu state per device
 329     * renamed all Broadcast...() and Report...() methods to Transmit...()
 330     * renamed SetOSDString() to TransmitOSDString()
 331     * changed debug level of 'did not receive ack' from error to debug
 332     * only set the power status to 'on' for the primary device
 333     * moved method decriptions from cecc.h to cec.h
 334     * only send a power on command when a device isn't on already and set
 335       the power state to CEC_POWER_STATUS_IN_TRANSITION_STANDBY_TO_ON while
 336       powering on
 337     * handle CEC_OPCODE_STANDBY
 338     * handle CEC_OPCODE_ACTIVE_SOURCE
 339     * always start in standby mode and let the tv (or other device) send the
 340       power on command
 341     * renamed the last few enums
 342     * handle deck related opcodes.
 343     * added TransmitVendorId(), but only transmit the id if it's not set to 'unknown'
 344
 345  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 11 Nov 2011 17:42:00 +0100
 346
 347 libcec (1.0-1) unstable; urgency=low
 348
 349   * interface changes:
 350     * set lib interface version back to 1.0 and rename GetLibVersion() to
 351       GetLibVersionMajor() and GetMinVersion() to GetMinLibVersion()
 352     * added GetLibVersionMinor()/cec_get_lib_version_minor() and set the minor
 353       version number to 1
 354   * fixed:
 355     * samsung's vendor specific remote keypresses don't send key releases. added
 356       call to AddKey() directly after the keypress
 357     * always reset the button press time in CLibCEC::AddKey()
 358     * always wait for a signal in CCECProcessor::Transmit()
 359   * changed:
 360     * drop shared_ptr and use a normal pointer. removed boost dependency
 361
 362  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 04 Nov 2011 00:14:00 +0100
 363
 364 libcec (0.8-2) unstable; urgency=low
 365
 366   * added 'libboost-dev' to build deps
 367
 368  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 01 Nov 2011 23:31:00 +0100
 369
 370 libcec (0.8-1) unstable; urgency=low
 371
 372   * interface changes:
 373     * added GetDevicePowerStatus()/cec_get_device_power_status()
 374     * added GetDeviceVendorId()/cec_get_device_vendor_id()
 375     * added GetDeviceMenuLanguage()/cec_get_device_menu_language()
 376     * added GetDeviceCecVersion()/cec_get_device_cec_version()
 377     * added SwitchMonitoring()/cec_switch_monitoring() to the interface. when
 378       monitoring is enabled, the device will only log the data it received,
 379       but will not respond to any message
 380     * removed timeout parameter in Transmit() and included the ack timeout in
 381        the cec_command struct
 382     * made the vendor id -> vendor name translation available
 383     * made CEC_LOG levels powers of 2
 384     * introduced CEC_LOG_TRAFFIC log level
 385   * fixed:
 386     * set the correct ackmask on startup
 387     * wait for ack while keeping a lock
 388     * wait for the processor thread to start before continueing on startup
 389     * wait for messages to be transmitted before continueing in
 390       CCECProcessor::Transmit()
 391     * only set the logical address once when it has changed
 392     * correct source for broadcast messages
 393     * win32: create Release type installer
 394   * changed:
 395     * make all reads and write in CAdapterCommunication go through buffers.
 396     * poll for a vendor ID of connected devices and switch to a non-standard
 397       CEC implementation if needed.
 398     * added vendor detection of Samsung and LG devices
 399     * handle samsung remote command 'return'
 400   * cec-client:
 401     * added -la and --logical-address to the command line params
 402     * added -d and --log-level params to cec-client
 403     * added -sf and --short-log-file, which only log the actual messages, not
 404       the level and timestamp
 405     * added -f and --log-file parameters to cec-client
 406     * added option to change the log level to cec-client
 407
 408  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 01 Nov 2011 22:58:00 +0100
 409
 410 libcec (0.7-1) unstable; urgency=low
 411
 412   * send a keypress with 0 duration when a key is pressed and with a duration
 413     set when it's released
 414   * added SetOSDString() to the interface (not supported by all tvs)
 415   * fixed: 'routing change' is a broadcast message. log routing changes, but
 416     don't send a 'set active view' message, so the active input won't be
 417     changed
 418   * log keypresses in the debug log
 419   * added 'pa' command to cec-client, to change the physical address
 420   * added SetPhysicalAddress()/cec_set_physical_address() to the interface, so
 421     the HDMI port number to use can be changed
 422   * fixed: put the message processing code from WaitForAck() in ParseMessage().
 423     fixes missing incoming message logging of non-data messages when not
 424     waiting for an ACK
 425   * added 'txn' command to cec-client. same as 'tx', but doesn't wait for ACK
 426     before returning
 427   * fixed: set initiator and destination first in cec_command::push_back().
 428     fixes 'tx' command in cec-client
 429   * fixed: keep trying to connect while iTimeout isn't reached (default 10
 430     seconds). fixes exit with a 'permission denied' error when the device isn't
 431     ready yet. remove CEC_SETTLE_DOWN_TIME
 432   * fixed: don't call SetActiveView() when reporting the power status. fixes
 433     loop which causes some TVs to report failed connections
 434   * fixed: eom was not being parsed when receiving MSGCODE_FRAME_DATA. fixed.
 435   * fixed: add the device type as parameter when sending the physical address.
 436     thanks bobo1on1
 437   * fixed: typo in libcec.pc.in
 438   * added optional strLib parameter to LoadLibCec(), so the location of the
 439     shared library can be specified
 440   * only link cec-client against ld. use AC_SEARCH_LIBS instead of AC_CHECK_LIB
 441   * use int instead of bool on the public C interface and remove stdbool.h include
 442   * renamed: CECExports.h => cec.h, CECExportsC.h => cecc.h, CECLoader.h =>
 443     cecloader.h, CECTypes.h => cectypes.h
 444   * updated debian package. split up libcec and libcec-dev
 445   * fixed: changed to use dlopen instead of static linkage. shuffled headers a
 446     bit. bumped interface to version 7
 447   * removed 'rt' from libraries. it's not needed (anymore)
 448   * fixed: reset the active view after a routing change. issue #1
 449   * fixed: changed attached license to be GPLv2 instead of GPLv3 this was an
 450     error as libCEC is licensed GPLv2 not GPLv3 thanks @garbear
 451   * added contributors link
 452
 453  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 14 Oct 2011 17:34:00 +0200
 454
 455 libcec (0.6-1) unstable; urgency=low
 456
 457   * bumped interface version to 6
 458   * fixed packet output (reporting the OSD name correctly now)
 459   * refactored packet structs: split up in cec commands and adapter messages
 460   * fixed i/o timings
 461   * added Darwin support (thanks Davilla!)
 462   * fixed WaitForAck()
 463   * fixed possible deadlock when starting a new thread
 464   * implemented vendor id and device class parsing. full detection will follow
 465   * added "on" and "standby" commands to the test client
 466   * retransmit packets if needed
 467   * fix GetTimeMs() on linux
 468   * added timestamp to log messages
 469
 470  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sun, 09 Oct 2011 15:15:00 +0200
 471
 472 libcec (0.5-1) unstable; urgency=low
 473
 474   * bumped interface version to 5
 475   * don't pass std::string and std::vector accross the interface
 476   * fixed heap corruption crashes on windows
 477   * fixed some memory leaks
 478   * reset all structs to default values before doing with them
 479
 480  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 07 Oct 2011 22:00:00 +0200
 481
 482 libcec (0.4-3) unstable; urgency=low
 483
 484   * fixed reconnect
 485   * fixed some threading related bugs
 486   * fixed deadlock on exit
 487   * fixed wrongly reported physical address
 488
 489  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Thu, 06 Oct 2011 00:19:00 +0200
 490
 491 libcec (0.4-2) unstable; urgency=low
 492
 493   * fixed int parameter sizes and some signed/unsigned warnings
 494   * check whether m_port isn't NULL in ReadFromDevice
 495   * stop the processor thread and delete the CSerialPort instance on exit
 496   * added mutex in CSerialPort
 497   * fix segfault on exit
 498   * renamed libPlatform -> platform.
 499   * stuck everything from libCEC in the CEC namespace to avoid namespace
 500     polution
 501
 502  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 04 Oct 2011 23:45:00 +0200
 503
 504 libcec (0.4-1) unstable; urgency=low
 505
 506   * bumped interface version to 4
 507   * timeout parameter removed from Close()/cec_close(). return type changed to
 508     void
 509   * added cec_destroy() method
 510   * removed timeout parameter from Transmit()
 511   * change the default argument of PowerOnDevices() to CECDEVICE_TV
 512   * removed PowerOffDevices(). use StandbyDevices() instead
 513   * removed obsolete methods from the interface
 514   * fixed bug: pthread_cond_wait was called without the mutex locked
 515   * fixed possible deadlock: don't send messages and wait for an ack with the
 516     mutex locked in CCECParser
 517   * created a separate reader thread and fixed the 'lock timeout' bug
 518   * testclient: use CECDEVICE_TV instead of the default argument
 519     (CECDEVICE_BROADCAST) for PowerOnDevices() and PowerOffDevices()
 520
 521  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Tue, 04 Oct 2011 00:48:00 +0200
 522
 523 libcec (0.3-1) unstable; urgency=low
 524
 525   * added device detection support for Windows
 526
 527  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Sun, 02 Oct 2011 12:09:33 +0200
 528
 529 libcec (0.2-1) unstable; urgency=low
 530
 531   * added a Close() method to the interface
 532   * Added CEC command that were received by the adapter in a buffer that can be
 533     read by a client with GetNextCommand()/cec_get_next_command(). added a
 534     'help' command to the test client, that displays all available commands
 535   * Fixed setting the ackmask. deprecated SetAckMask()/cec_set_ack_mask(). use
 536     SetLogicalAddress()/cec_set_logical_address() instead. add 'la' command to
 537     the testclient to set the logical address of the cec adapter
 538   * Added optional logical and physical address parameters to
 539     LoadLibCec()/cec_init() on the interface. fixed wrongly placed namespace
 540     close tag in CECExports.h. updated interface documentation. bumped
 541     interface version to 2.
 542   * fixed hardcoded ackmask in SetAckMast(). set a shorter display name in the
 543     test client. the previous one was too long and being rejected
 544
 545  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 28 Sep 2011 01:33:00 +0200
 546
 547 libcec (0.1-1) unstable; urgency=low
 548
 549   * Initial release v0.1
 550
 551  -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Wed, 28 Sep 2011 23:55:48 +0200