bumped version numbers to 1.5.3 and updated changelogs

diff --git a/ChangeLog b/ChangeLog
index 15d5a73e25bc2ec09e8a77494194342f1c4d3b76..f915c1f9c60d1bdb12e8f0c7771c0c5eb50cae0a 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,45 @@
+libcec (1.5-4) unstable; urgency=low
+
+  * changed/added:
+    * OS-X installation requirements and pointer
+    * full v2 firmware support:
+      * ping the adapter every 15 seconds. bugzid: 541
+      * added v2 msgcodes. bugzid: 543
+      * implemented the write methods for the v2 configuration. bugzid: 543
+      * included the logical addresses in the persisted configuration for v2.
+        bugzid: 543
+      * persist the configuration before closing the connection. only try to
+        persist the configuration when talking to a v2 firmware. bugzid: 543
+      * added GetSetting() to CUSBCECAdapterCommunication. bugzid: 543
+      * read the persisted settings from the ROM, and update it in
+        libcec_configuration if found. bugzid: 543
+      * cec-client: set bGetSettingsFromROM to 1 in cec-client. bugzid: 543
+      * cec-client: only read persisted EEPROM settings when -r or --rom is
+        provided as cmdline arg. bugzid: 543
+      * call SetControlledMode(false) as last command when closing the
+        connection in v2. bugzid: 542
+    * initial FreeBSD support: simply try to use ttyU*
+
+  * fixed:
+    * set controlled mode and retry to send the previous command if it failed
+      with MSGCODE_COMMAND_REJECTED
+    * m_iLineTimeout was never initialised and used. fixes MSGCODE_REJECTED
+      when transmitting a message and incorrect line timeouts being used
+    * mac configure compile bugzid: 157
+    * cec-config-gui: fixed application exit when the user clicked 'no' when
+      asked to reconnect. bugzid: 556
+    * only wait for multiple 'command accepted' response when sending a
+      transmit command, and only to 1 in other cases. bugzid: 543
+    * set the correct logical address mask before switching to autonomous mode.
+      bugzid: 543
+    * re-added SetLineTimeout(). bugzid: 543
+    * CUSBCECAdapterCommunication::SetControlledMode checked for the wrong sent
+      state
+    * os-x: don't add 0.5 before dividing in GetTimeMs()
+    * os-x: struct timespec now values weren't set correctly
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 16 Mar 2012 10:12:00 +0100
+
 libcec (1.5-3) unstable; urgency=low
 
   * fixed:

diff --git a/debian/changelog b/debian/changelog
index 15d5a73e25bc2ec09e8a77494194342f1c4d3b76..f915c1f9c60d1bdb12e8f0c7771c0c5eb50cae0a 100644 (file)
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,45 @@
+libcec (1.5-4) unstable; urgency=low
+
+  * changed/added:
+    * OS-X installation requirements and pointer
+    * full v2 firmware support:
+      * ping the adapter every 15 seconds. bugzid: 541
+      * added v2 msgcodes. bugzid: 543
+      * implemented the write methods for the v2 configuration. bugzid: 543
+      * included the logical addresses in the persisted configuration for v2.
+        bugzid: 543
+      * persist the configuration before closing the connection. only try to
+        persist the configuration when talking to a v2 firmware. bugzid: 543
+      * added GetSetting() to CUSBCECAdapterCommunication. bugzid: 543
+      * read the persisted settings from the ROM, and update it in
+        libcec_configuration if found. bugzid: 543
+      * cec-client: set bGetSettingsFromROM to 1 in cec-client. bugzid: 543
+      * cec-client: only read persisted EEPROM settings when -r or --rom is
+        provided as cmdline arg. bugzid: 543
+      * call SetControlledMode(false) as last command when closing the
+        connection in v2. bugzid: 542
+    * initial FreeBSD support: simply try to use ttyU*
+
+  * fixed:
+    * set controlled mode and retry to send the previous command if it failed
+      with MSGCODE_COMMAND_REJECTED
+    * m_iLineTimeout was never initialised and used. fixes MSGCODE_REJECTED
+      when transmitting a message and incorrect line timeouts being used
+    * mac configure compile bugzid: 157
+    * cec-config-gui: fixed application exit when the user clicked 'no' when
+      asked to reconnect. bugzid: 556
+    * only wait for multiple 'command accepted' response when sending a
+      transmit command, and only to 1 in other cases. bugzid: 543
+    * set the correct logical address mask before switching to autonomous mode.
+      bugzid: 543
+    * re-added SetLineTimeout(). bugzid: 543
+    * CUSBCECAdapterCommunication::SetControlledMode checked for the wrong sent
+      state
+    * os-x: don't add 0.5 before dividing in GetTimeMs()
+    * os-x: struct timespec now values weren't set correctly
+
+ -- Pulse-Eight Packaging <packaging@pulse-eight.com>  Fri, 16 Mar 2012 10:12:00 +0100
+
 libcec (1.5-3) unstable; urgency=low
 
   * fixed:

diff --git a/project/cec-config.rc b/project/cec-config.rc
index 180f4f050acf9882a287d1144d293a21bf783876..af72f98f1768cf80a596ae12ef24a24082f35257 100644 (file)
Binary files a/project/cec-config.rc and b/project/cec-config.rc differ

diff --git a/project/libcec.rc b/project/libcec.rc
index 4de5b4fa94028e021d401b8d4da0d80115dfe513..c93582b8eaf6a6f033f8a7094d9ccad48b65e2be 100644 (file)
Binary files a/project/libcec.rc and b/project/libcec.rc differ

diff --git a/project/testclient.rc b/project/testclient.rc
index 15edfb5a5f2080c5845050e16f3992e72fee829d..92db5948b0a81fc7bbd080b1682021d2c2d34893 100644 (file)
Binary files a/project/testclient.rc and b/project/testclient.rc differ

diff --git a/src/CecSharpTester/Properties/AssemblyInfo.cs b/src/CecSharpTester/Properties/AssemblyInfo.cs
index e12aca92a80ebcf6ba338bba6b5442d790634ddd..1b62cf221973eedb712ee0bec2ada42fcd5cb726 100644 (file)
--- a/src/CecSharpTester/Properties/AssemblyInfo.cs
+++ b/src/CecSharpTester/Properties/AssemblyInfo.cs
@@ -32,5 +32,5 @@ using System.Runtime.InteropServices;
 // You can specify all the values or you can default the Build and Revision Numbers 
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.5.2.0")]
-[assembly: AssemblyFileVersion("1.5.2.0")]
+[assembly: AssemblyVersion("1.5.3.0")]
+[assembly: AssemblyFileVersion("1.5.3.0")]

diff --git a/src/LibCecSharp/AssemblyInfo.cpp b/src/LibCecSharp/AssemblyInfo.cpp
index 5dfbef2d600b2f90fa096f30d5a2d513a24ef9f2..0765c2396da41ce8340b252443d708e3641e927d 100644 (file)
--- a/src/LibCecSharp/AssemblyInfo.cpp
+++ b/src/LibCecSharp/AssemblyInfo.cpp
@@ -13,7 +13,7 @@ using namespace System::Security::Permissions;
 [assembly:AssemblyTrademarkAttribute("")];
 [assembly:AssemblyCultureAttribute("")];
 
-[assembly:AssemblyVersionAttribute("1.5.2.0")];
+[assembly:AssemblyVersionAttribute("1.5.3.0")];
 
 [assembly:ComVisible(false)];
 [assembly:CLSCompliantAttribute(true)];

diff --git a/src/cec-config-gui/Properties/AssemblyInfo.cs b/src/cec-config-gui/Properties/AssemblyInfo.cs
index a1206f99126633184aa7a86119ba51ec14a948ed..ad876010c6cc90d81cc718b478a638adbb210b7d 100644 (file)
--- a/src/cec-config-gui/Properties/AssemblyInfo.cs
+++ b/src/cec-config-gui/Properties/AssemblyInfo.cs
@@ -32,5 +32,5 @@ using System.Runtime.InteropServices;
 // You can specify all the values or you can default the Build and Revision Numbers 
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.5.2.0")]
-[assembly: AssemblyFileVersion("1.5.2.0")]
+[assembly: AssemblyVersion("1.5.3.0")]
+[assembly: AssemblyFileVersion("1.5.3.0")]