1 abstract class TestPattern extends SCPattern {
2 public TestPattern(GLucose glucose) {
8 class TestSpeakerMapping extends TestPattern {
9 TestSpeakerMapping(GLucose glucose) {
13 public void run(double deltaMs) {
15 for (Speaker speaker : model.speakers) {
16 for (Strip strip : speaker.strips) {
18 for (Point p : strip.points) {
19 colors[p.index] = color(h % 360, 100, b);
29 class TestBassMapping extends TestPattern {
30 TestBassMapping(GLucose glucose) {
34 public void run(double deltaMs) {
35 int[] strips = { 2, 1, 0, 3, 13, 12, 15, 14, 9, 8, 11, 10, 5, 4, 7, 6 };
37 for (int si : strips) {
39 for (Point p : model.bassBox.strips.get(si).points) {
40 colors[p.index] = color(h % 360, 100, b);
48 class TestFloorMapping extends TestPattern {
49 TestFloorMapping(GLucose glucose) {
53 public void run(double deltaMs) {
54 int[] strutIndices = {6, 5, 4, 3, 2, 1, 0, 7};
56 for (int si : strutIndices) {
58 for (Point p : model.bassBox.struts.get(si).points) {
59 colors[p.index] = color(h % 360, 100, b);
64 int[] floorIndices = {0, 1, 2, 3};
66 for (int fi : floorIndices) {
68 for (Point p : model.boothFloor.strips.get(fi).points) {
69 colors[p.index] = color(h, 100, b);
77 class TestStripPattern extends TestPattern {
79 SinLFO d = new SinLFO(4, 40, 4000);
81 public TestStripPattern(GLucose glucose) {
83 addModulator(d).trigger();
86 public void run(double deltaMs) {
87 for (Strip s : model.strips) {
88 for (Point p : s.points) {
89 colors[p.index] = color(
92 max(0, 100 - d.getValuef()*dist(p.x, p.y, s.cx, s.cy))
100 * Simplest demonstration of using the rotating master hue.
101 * All pixels are full-on the same color.
103 class TestHuePattern extends TestPattern {
104 public TestHuePattern(GLucose glucose) {
108 public void run(double deltaMs) {
109 // Access the core master hue via this method call
110 float hv = lx.getBaseHuef();
111 for (int i = 0; i < colors.length; ++i) {
112 colors[i] = color(hv, 100, 100);
118 * Test of a wave moving across the X axis.
120 class TestXPattern extends TestPattern {
121 private final SinLFO xPos = new SinLFO(0, model.xMax, 4000);
122 public TestXPattern(GLucose glucose) {
124 addModulator(xPos).trigger();
126 public void run(double deltaMs) {
127 float hv = lx.getBaseHuef();
128 for (Point p : model.points) {
129 // This is a common technique for modulating brightness.
130 // You can use abs() to determine the distance between two
131 // values. The further away this point is from an exact
132 // point, the more we decrease its brightness
133 float bv = max(0, 100 - abs(p.fx - xPos.getValuef()));
134 colors[p.index] = color(hv, 100, bv);
140 * Test of a wave on the Y axis.
142 class TestYPattern extends TestPattern {
143 private final SinLFO yPos = new SinLFO(0, model.yMax, 4000);
144 public TestYPattern(GLucose glucose) {
146 addModulator(yPos).trigger();
148 public void run(double deltaMs) {
149 float hv = lx.getBaseHuef();
150 for (Point p : model.points) {
151 float bv = max(0, 100 - abs(p.fy - yPos.getValuef()));
152 colors[p.index] = color(hv, 100, bv);
158 * Test of a wave on the Z axis.
160 class TestZPattern extends TestPattern {
161 private final SinLFO zPos = new SinLFO(0, model.zMax, 4000);
162 public TestZPattern(GLucose glucose) {
164 addModulator(zPos).trigger();
166 public void run(double deltaMs) {
167 float hv = lx.getBaseHuef();
168 for (Point p : model.points) {
169 float bv = max(0, 100 - abs(p.fz - zPos.getValuef()));
170 colors[p.index] = color(hv, 100, bv);
176 * This shows how to iterate over towers, enumerated in the model.
178 class TestTowerPattern extends TestPattern {
179 private final SawLFO towerIndex = new SawLFO(0, model.towers.size(), 1000*model.towers.size());
181 public TestTowerPattern(GLucose glucose) {
183 addModulator(towerIndex).trigger();
186 public void run(double deltaMs) {
188 for (Tower t : model.towers) {
189 for (Point p : t.points) {
190 colors[p.index] = color(
193 max(0, 100 - 80*LXUtils.wrapdistf(ti, towerIndex.getValuef(), model.towers.size()))
203 * This is a demonstration of how to use the projection library. A projection
204 * creates a mutation of the coordinates of all the points in the model, creating
205 * virtual x,y,z coordinates. In effect, this is like virtually rotating the entire
206 * art car. However, since in reality the car does not move, the result is that
207 * it appears that the object we are drawing on the car is actually moving.
209 * Keep in mind that what we are creating a projection of is the view coordinates.
210 * Depending on your intuition, some operations may feel backwards. For instance,
211 * if you translate the view to the right, it will make it seem that the object
212 * you are drawing has moved to the left. If you scale the view up 2x, objects
213 * drawn with the same absolute values will seem to be half the size.
215 * If this feels counterintuitive at first, don't worry. Just remember that you
216 * are moving the pixels, not the structure. We're dealing with a finite set
217 * of sparse, non-uniformly spaced pixels. Mutating the structure would move
218 * things to a space where there are no pixels in 99% of the cases.
220 class TestProjectionPattern extends TestPattern {
222 private final Projection projection;
223 private final SawLFO angle = new SawLFO(0, TWO_PI, 9000);
224 private final SinLFO yPos = new SinLFO(-20, 40, 5000);
226 public TestProjectionPattern(GLucose glucose) {
228 projection = new Projection(model);
229 addModulator(angle).trigger();
230 addModulator(yPos).trigger();
233 public void run(double deltaMs) {
234 // For the same reasons described above, it may logically feel to you that
235 // some of these operations are in reverse order. Again, just keep in mind that
236 // the car itself is what's moving, not the object
237 projection.reset(model)
239 // Translate so the center of the car is the origin, offset by yPos
240 .translateCenter(model, 0, yPos.getValuef(), 0)
242 // Rotate around the origin (now the center of the car) about an X-vector
243 .rotate(angle.getValuef(), 1, 0, 0)
245 // Scale up the Y axis (objects will look smaller in that access)
248 float hv = lx.getBaseHuef();
249 for (Coord c : projection) {
250 float d = sqrt(c.x*c.x + c.y*c.y + c.z*c.z); // distance from origin
251 // d = abs(d-60) + max(0, abs(c.z) - 20); // life saver / ring thing
252 d = max(0, abs(c.y) - 10 + .1*abs(c.z) + .02*abs(c.x)); // plane / spear thing
253 colors[c.index] = color(
254 (hv + .6*abs(c.x) + abs(c.z)) % 360,
256 constrain(140 - 40*d, 0, 100)
262 class TestCubePattern extends TestPattern {
264 private SawLFO index = new SawLFO(0, Cube.POINTS_PER_CUBE, Cube.POINTS_PER_CUBE*60);
266 TestCubePattern(GLucose glucose) {
268 addModulator(index).start();
271 public void run(double deltaMs) {
272 for (Cube c : model.cubes) {
274 for (Point p : c.points) {
275 colors[p.index] = color(
278 max(0, 100 - 80.*abs(i - index.getValuef()))
286 class MappingTool extends TestPattern {
288 private int cubeIndex = 0;
289 private int stripIndex = 0;
290 private int channelIndex = 0;
292 public final int MAPPING_MODE_ALL = 0;
293 public final int MAPPING_MODE_CHANNEL = 1;
294 public final int MAPPING_MODE_SINGLE_CUBE = 2;
295 public int mappingMode = MAPPING_MODE_ALL;
297 public final int CUBE_MODE_ALL = 0;
298 public final int CUBE_MODE_SINGLE_STRIP = 1;
299 public final int CUBE_MODE_STRIP_PATTERN = 2;
300 public int cubeMode = CUBE_MODE_ALL;
302 public boolean channelModeRed = true;
303 public boolean channelModeGreen = false;
304 public boolean channelModeBlue = false;
306 private final int numChannels;
308 private final PandaMapping[] pandaMappings;
309 private PandaMapping activePanda;
310 private ChannelMapping activeChannel;
312 MappingTool(GLucose glucose, PandaMapping[] pandaMappings) {
314 this.pandaMappings = pandaMappings;
315 numChannels = pandaMappings.length * PandaMapping.CHANNELS_PER_BOARD;
319 public int numChannels() {
323 private void setChannel() {
324 activePanda = pandaMappings[channelIndex / PandaMapping.CHANNELS_PER_BOARD];
325 activeChannel = activePanda.channelList[channelIndex % PandaMapping.CHANNELS_PER_BOARD];
328 private int indexOfCubeInChannel(Cube c) {
329 if (activeChannel.mode == ChannelMapping.MODE_CUBES) {
331 for (int index : activeChannel.objectIndices) {
332 if ((index >= 0) && (c == model.getCubeByRawIndex(index))) {
341 private void printInfo() {
342 println("Cube:" + cubeIndex + " Strip:" + (stripIndex+1));
345 public void cube(int delta) {
346 int len = model.cubes.size();
347 cubeIndex = (len + cubeIndex + delta) % len;
351 public void strip(int delta) {
352 int len = Cube.STRIPS_PER_CUBE;
353 stripIndex = (len + stripIndex + delta) % len;
357 public void run(double deltaMs) {
358 color off = color(0, 0, 0);
363 if (channelModeRed) c |= r;
364 if (channelModeGreen) c |= g;
365 if (channelModeBlue) c |= b;
368 for (Cube cube : model.cubes) {
369 boolean cubeOn = false;
370 int indexOfCubeInChannel = indexOfCubeInChannel(cube);
371 switch (mappingMode) {
372 case MAPPING_MODE_ALL: cubeOn = true; break;
373 case MAPPING_MODE_SINGLE_CUBE: cubeOn = (cubeIndex == ci); break;
374 case MAPPING_MODE_CHANNEL: cubeOn = (indexOfCubeInChannel > 0); break;
377 if (mappingMode == MAPPING_MODE_CHANNEL) {
379 switch (indexOfCubeInChannel) {
380 case 1: cc = r; break;
381 case 2: cc = r|g; break;
382 case 3: cc = g; break;
383 case 4: cc = b; break;
384 case 5: cc = r|b; break;
387 } else if (cubeMode == CUBE_MODE_STRIP_PATTERN) {
390 for (Strip strip : cube.strips) {
391 int faceI = si / Face.STRIPS_PER_FACE;
393 case 0: sc = r; break;
394 case 1: sc = g; break;
395 case 2: sc = b; break;
396 case 3: sc = r|g|b; break;
398 if (si % Face.STRIPS_PER_FACE == 2) {
404 } else if (cubeMode == CUBE_MODE_SINGLE_STRIP) {
406 setColor(cube.strips.get(stripIndex), c);
417 public void setCube(int index) {
418 cubeIndex = index % model.cubes.size();
421 public void incCube() {
422 cubeIndex = (cubeIndex + 1) % model.cubes.size();
425 public void decCube() {
428 cubeIndex += model.cubes.size();
432 public void setChannel(int index) {
433 channelIndex = index % numChannels;
437 public void incChannel() {
438 channelIndex = (channelIndex + 1) % numChannels;
442 public void decChannel() {
443 channelIndex = (channelIndex + numChannels - 1) % numChannels;
447 public void setStrip(int index) {
448 stripIndex = index % Cube.STRIPS_PER_CUBE;
451 public void incStrip() {
452 stripIndex = (stripIndex + 1) % Cube.STRIPS_PER_CUBE;
455 public void decStrip() {
456 stripIndex = (stripIndex + Cube.STRIPS_PER_CUBE - 1) % Cube.STRIPS_PER_CUBE;
459 public void keyPressed(UIMapping uiMapping) {
461 case UP: if (mappingMode == MAPPING_MODE_CHANNEL) incChannel(); else incCube(); break;
462 case DOWN: if (mappingMode == MAPPING_MODE_CHANNEL) decChannel(); else decCube(); break;
463 case LEFT: decStrip(); break;
464 case RIGHT: incStrip(); break;
467 case 'r': channelModeRed = !channelModeRed; break;
468 case 'g': channelModeGreen = !channelModeGreen; break;
469 case 'b': channelModeBlue = !channelModeBlue; break;
471 uiMapping.setChannelID(channelIndex+1);
472 uiMapping.setCubeID(cubeIndex+1);
473 uiMapping.setStripID(stripIndex+1);