-class SineSphere extends DPat {
+class SineSphere extends SCPattern {
+ private SinLFO yrot = new SinLFO(0, TWO_PI, 2000);
+ public final Projection sinespin;
float modelrad = sqrt((model.xMax)*(model.xMax) + (model.yMax)*(model.yMax) + (model.zMax)*(model.zMax));
- //PVector modelcenter = new PVector(model.xMax, model.yMax, model.zMax);
Pick Sshape;
class Sphery {
addParameter(bouncerate = new BasicParameter("Rate", .5)); //ybounce.modulateDurationBy(bouncerate);
addParameter(widthparameter = new BasicParameter("Width", .1));
addParameter(huespread = new BasicParameter("Hue", .2));
-
+
addModulator( vx = new SinLFO(-4000, 10000, 100000)).trigger() ;
//addModulator(xbounce = new SinLFO(model.xMax/3, 2*model.yMax/3, 2000)).trigger();
addModulator(ybounce= new SinLFO(model.yMax/3, 2*model.yMax/3, 240000./lx.tempo.bpm())).trigger(); //ybounce.modulateDurationBy
- 1.2*vibration.getValuef() ) ) ) ;
}
-
- void run(int deltaMS) { };
+void run(double deltaMs) {
+ float vv = vibration.getValuef();
+ float ybv = ybounce.getValuef();
+
+ }
}
SineSphere(GLucose glucose)
{
super(glucose);
- //Sshape = addPick("Shape", 0, 1);
+ sinespin = new Projection(model);
+ addModulator(yrot).trigger();
+ //Sshape = addPick("Shape", , 1);
spherys = new Sphery[] {
new Sphery(model.xMax/4, model.yMax/2, model.zMax/2, modelrad/16, modelrad/8, 3000),
new Sphery(.75*model.xMax, model.yMax/2, model.zMax/2, modelrad/20, modelrad/10, 2000),
// }
// }
- void StartRun(int deltaMs) {
+ void run( double deltaMs) {
float t = lx.tempo.rampf();
float bpm = lx.tempo.bpmf();
//spherys[1].run(deltaMs);
//spherys[2].run(deltaMs);
- //spherys[3].run(deltaMs);
-
-
+ //spherys[3].run(deltaMs);]
+ sinespin.reset(model)
+
+ // Translate so the center of the car is the origin, offset by yPos
+ .translateCenter(model, 0, 0, 0)
+
+ // Rotate around the origin (now the center of the car) about an X-vector
+ .rotate(yrot.getValuef(), 0, 1, 0);
+
+
+
+ for (Point p: model.points){
+ color c = 0;
+ c = blendColor(c, spherys[1].spheryvalue(p.x, p.y, p.z, .75*model.xMax, model.yMax/2, model.zMax/2), ADD);
+ c = blendColor(c, spherys[0].spheryvalue(p.x, p.y, p.z, model.xMax/4, model.yMax/4, model.zMax/2), ADD);
+ c = blendColor(c, spherys[2].spheryvalue(p.x, p.y, p.z, model.xMax/2, model.yMax/2, model.zMax/2),ADD);
+
+ colors[p.index] = lx.hsb(lx.h(c), lx.s(c), lx.b(c));
+
+ }
+
}
// spheremode++;
// }
- color CalcPoint(xyz Px)
- {
- // if (spheremode == 0 )
+ // color CalcPoint(PVector Px)
+ // {
+ // // if (spheremode == 0 )
//{
- color c = 0;
- c = blendColor(c, spherys[1].spheryvalue(Px.x, Px.y, Px.z, .75*model.xMax, model.yMax/2, model.zMax/2), ADD);
- c = blendColor(c, spherys[0].spheryvalue(Px.x, Px.y, Px.z, model.xMax/4, model.yMax/4, model.zMax/2), ADD);
- c = blendColor(c, spherys[2].spheryvalue(Px.x, Px.y, Px.z, model.xMax/2, model.yMax/2, model.zMax/2),ADD);
- return c;
+
//}
// else if (spheremode == 1)
// {
// }
- }
+ // }
}
+class CubeCurl extends SCPattern{
+float CH, CW, diag;
+ArrayList<PVector> cubeorigin = new ArrayList<PVector>();
+ArrayList<PVector> centerlist = new ArrayList<PVector>();
+private SinLFO curl = new SinLFO(0, Cube.EDGE_HEIGHT, 5000 );
+
+private SinLFO bg = new SinLFO(180, 220, 3000);
+
+CubeCurl(GLucose glucose){
+super(glucose);
+addModulator(curl).trigger();
+addModulator(bg).trigger();
+ this.CH = Cube.EDGE_HEIGHT;
+ this.CW = Cube.EDGE_WIDTH;
+ this.diag = sqrt(CW*CW + CW*CW);
+
+
+ArrayList<PVector> centerlistrelative = new ArrayList<PVector>();
+for (int i = 0; i < model.cubes.size(); i++){
+ Cube a = model.cubes.get(i);
+ cubeorigin.add(new PVector(a.x, a.y, a.z));
+ centerlist.add(centerofcube(i));
+
+}
+
+}
+//there is definitely a better way of doing this!
+PVector centerofcube(int i) {
+Cube c = model.cubes.get(i);
+
+println(" cube #: " + i + " c.x " + c.x + " c.y " + c.y + " c.z " + c.z );
+PVector cubeangle = new PVector(c.rx, c.ry, c.rz);
+//println("raw x" + cubeangle.x + "raw y" + cubeangle.y + "raw z" + cubeangle.z);
+PVector cubecenter = new PVector(c.x + CW/2, c.y + CH/2, c.z + CW/2);
+println("cubecenter unrotated: " + cubecenter.x + " " +cubecenter.y + " " +cubecenter.z );
+PVector centerrot = new PVector(cos(c.rx)*CW/2 - sin(c.rx)*CW/2, 0, cos(c.rz)*CW/2 + sin(c.rz)*CW/2);
+ // nCos*(y-o.y) - nSin*(z-o.z) + o.y
+cubecenter = PVector.add(cubecenter, centerrot);
+println( " cubecenter.x " + cubecenter.x + " cubecenter.y " + cubecenter.y + " cubecenter.z " + cubecenter.z + " ");
+
+
+return cubecenter;
+}
+
+
+void run(double deltaMs){
+for (int i =0; i < model.cubes.size(); i++) {
+Cube c = model.cubes.get(i);
+float cfloor = c.y;
+
+// if (i%3 == 0){
+
+// for (Point p : c.points ){
+// // colors[p.index]=color(0,0,0);
+// //float dif = (p.y - c.y);
+// //colors[p.index] = color( bg.getValuef() , 80 , dif < curl.getValuef() ? 80 : 0, ADD);
+// }
+// }
+
+// else if (i%3 == 1) {
+
+// for (Point p: c.points){
+// colors[p.index]=color(0,0,0);
+// float dif = (p.y - c.y);
+// // colors[p.index] =
+// // color(bg.getValuef(),
+// // map(curl.getValuef(), 0, Cube.EDGE_HEIGHT, 20, 100),
+// // 100 - 10*abs(dif - curl.getValuef()), ADD );
+// }
+// }
+// else if (i%3 == 2){
+ // centerlist[i].sub(cubeorigin(i);
+ for (Point p: c.points) {
+ PVector pv = new PVector(p.x, p.y, p.z);
+ colors[p.index] =color( constrain(4* pv.dist(centerlist.get(i)), 0, 360) , 50, 100 );
+ // colors[p.index] =color(constrain(centerlist[i].x, 0, 360), constrain(centerlist[i].y, 0, 100), );
+
+
+ }
+
+
+ //}
+
+ }
+ }
+ }
+
class HueTestHSB extends SCPattern{
BasicParameter HueT = new BasicParameter("Hue", .5);
BasicParameter SatT = new BasicParameter("Sat", .5);