import ddf.minim.*;
import ddf.minim.analysis.*;
import processing.opengl.*;
-import java.lang.reflect.*;
import rwmidi.*;
final int VIEWPORT_WIDTH = 900;
final int VIEWPORT_HEIGHT = 700;
-final int TARGET_FRAMERATE = 45;
+
+final float TRAILER_WIDTH = 240;
+final float TRAILER_DEPTH = 97;
+final float TRAILER_HEIGHT = 33;
+
+final float BASS_WIDTH = 124;
+final float BASS_HEIGHT = 31.5;
+final float BASS_DEPTH = 66;
+final float BASS_X = (TRAILER_WIDTH - BASS_WIDTH) / 2.;
+final float BASS_Z = (TRAILER_DEPTH - BASS_DEPTH) / 2.;
+
+int targetFramerate = 60;
int startMillis, lastMillis;
GLucose glucose;
HeronLX lx;
+MappingTool mappingTool;
LXPattern[] patterns;
LXTransition[] transitions;
LXEffect[] effects;
OverlayUI ui;
-
+ControlUI controlUI;
+MappingUI mappingUI;
+PandaDriver[] pandaBoards;
+boolean mappingMode = false;
boolean debugMode = false;
+DebugUI debugUI;
+
+// Camera variables
+float eyeR, eyeA, eyeX, eyeY, eyeZ, midX, midY, midZ;
void setup() {
startMillis = lastMillis = millis();
// Initialize the Processing graphics environment
size(VIEWPORT_WIDTH, VIEWPORT_HEIGHT, OPENGL);
- frameRate(TARGET_FRAMERATE);
+ frameRate(targetFramerate);
noSmooth();
// hint(ENABLE_OPENGL_4X_SMOOTH); // no discernable improvement?
logTime("Created viewport");
// Create the GLucose engine to run the cubes
- glucose = new GLucose(this, new SCMapping());
+ glucose = new GLucose(this, buildModel());
lx = glucose.lx;
lx.enableKeyboardTempo();
logTime("Built GLucose engine");
logTime("Built effects");
glucose.setTransitions(transitions = transitions(glucose));
logTime("Built transitions");
+
+ // Build output driver
+ PandaMapping[] pandaMappings = buildPandaList();
+ pandaBoards = new PandaDriver[pandaMappings.length];
+ int pbi = 0;
+ for (PandaMapping pm : pandaMappings) {
+ pandaBoards[pbi++] = new PandaDriver(pm.ip, glucose.model, pm);
+ }
+ mappingTool = new MappingTool(glucose, pandaMappings);
+ logTime("Built PandaDriver");
// Build overlay UI
- ui = new OverlayUI();
+ ui = controlUI = new ControlUI();
+ mappingUI = new MappingUI(mappingTool);
+ debugUI = new DebugUI(pandaMappings);
logTime("Built overlay UI");
// MIDI devices
}
SCMidiDevices.initializeStandardDevices(glucose);
logTime("Setup MIDI devices");
+
+ // Setup camera
+ midX = TRAILER_WIDTH/2. + 20;
+ midY = glucose.model.yMax/2;
+ midZ = TRAILER_DEPTH/2.;
+ eyeR = -290;
+ eyeA = .15;
+ eyeY = midY + 20;
+ eyeX = midX + eyeR*sin(eyeA);
+ eyeZ = midZ + eyeR*cos(eyeA);
+ addMouseWheelListener(new java.awt.event.MouseWheelListener() {
+ public void mouseWheelMoved(java.awt.event.MouseWheelEvent mwe) {
+ mouseWheel(mwe.getWheelRotation());
+ }});
+
println("Total setup: " + (millis() - startMillis) + "ms");
+ println("Hit the 'p' key to toggle Panda Board output");
}
void controllerChangeReceived(rwmidi.Controller cc) {
}
void draw() {
- // The glucose engine deals with the core simulation here, we don't need
- // to do anything specific. This method just needs to exist.
+ // Draws the simulation and the 2D UI overlay
+ background(40);
+ color[] colors = glucose.getColors();
+ if (debugMode) {
+ debugUI.maskColors(colors);
+ }
+
+ camera(
+ eyeX, eyeY, eyeZ,
+ midX, midY, midZ,
+ 0, -1, 0
+ );
+
+ noStroke();
+ fill(#141414);
+ drawBox(0, -TRAILER_HEIGHT, 0, 0, 0, 0, TRAILER_WIDTH, TRAILER_HEIGHT, TRAILER_DEPTH, TRAILER_HEIGHT/2.);
+ fill(#070707);
+ stroke(#222222);
+ beginShape();
+ vertex(0, 0, 0);
+ vertex(TRAILER_WIDTH, 0, 0);
+ vertex(TRAILER_WIDTH, 0, TRAILER_DEPTH);
+ vertex(0, 0, TRAILER_DEPTH);
+ endShape();
+
+ noStroke();
+ fill(#393939);
+ drawBox(BASS_X, 0, BASS_Z, 0, 0, 0, BASS_WIDTH, BASS_HEIGHT, BASS_DEPTH, Cube.CHANNEL_WIDTH);
+ for (Cube c : glucose.model.cubes) {
+ drawCube(c);
+ }
+
+ noFill();
+ strokeWeight(2);
+ beginShape(POINTS);
+ for (Point p : glucose.model.points) {
+ stroke(colors[p.index]);
+ vertex(p.fx, p.fy, p.fz);
+ // println(p.fx + ":" + p.fy + ":" + p.fz);
+ }
+ endShape();
+
+ // 2D Overlay
+ camera();
+ javax.media.opengl.GL gl = ((PGraphicsOpenGL)g).beginGL();
+ gl.glClear(javax.media.opengl.GL.GL_DEPTH_BUFFER_BIT);
+ ((PGraphicsOpenGL)g).endGL();
+ strokeWeight(1);
+ drawUI();
+
+ if (debugMode) {
+ debugUI.draw();
+ }
+
+ // TODO(mcslee): move into GLucose engine
+ for (PandaDriver p : pandaBoards) {
+ p.send(colors);
+ }
+}
+
+void drawCube(Cube c) {
+ float in = .15;
+ drawBox(c.x+in, c.y+in, c.z+in, c.rx, c.ry, c.rz, Cube.EDGE_WIDTH-in*2, Cube.EDGE_HEIGHT-in*2, Cube.EDGE_WIDTH-in*2, Cube.CHANNEL_WIDTH-in);
+}
+
+void drawBox(float x, float y, float z, float rx, float ry, float rz, float xd, float yd, float zd, float sw) {
+ pushMatrix();
+ translate(x, y, z);
+ rotate(rx / 180. * PI, -1, 0, 0);
+ rotate(ry / 180. * PI, 0, -1, 0);
+ rotate(rz / 180. * PI, 0, 0, -1);
+ for (int i = 0; i < 4; ++i) {
+ float wid = (i % 2 == 0) ? xd : zd;
+
+ beginShape();
+ vertex(0, 0);
+ vertex(wid, 0);
+ vertex(wid, yd);
+ vertex(wid - sw, yd);
+ vertex(wid - sw, sw);
+ vertex(0, sw);
+ endShape();
+ beginShape();
+ vertex(0, sw);
+ vertex(0, yd);
+ vertex(wid - sw, yd);
+ vertex(wid - sw, yd - sw);
+ vertex(sw, yd - sw);
+ vertex(sw, sw);
+ endShape();
+
+ translate(wid, 0, 0);
+ rotate(HALF_PI, 0, -1, 0);
+ }
+ popMatrix();
}
void drawUI() {
}
boolean uiOn = true;
-boolean knobsOn = true;
+int restoreToIndex = -1;
+
void keyPressed() {
+ if (mappingMode) {
+ mappingTool.keyPressed();
+ }
switch (key) {
+ case '-':
+ case '_':
+ frameRate(--targetFramerate);
+ break;
+ case '=':
+ case '+':
+ frameRate(++targetFramerate);
+ break;
case 'd':
debugMode = !debugMode;
println("Debug output: " + (debugMode ? "ON" : "OFF"));
break;
+ case 'm':
+ mappingMode = !mappingMode;
+ if (mappingMode) {
+ LXPattern pattern = lx.getPattern();
+ for (int i = 0; i < patterns.length; ++i) {
+ if (pattern == patterns[i]) {
+ restoreToIndex = i;
+ break;
+ }
+ }
+ ui = mappingUI;
+ lx.setPatterns(new LXPattern[] { mappingTool });
+ } else {
+ ui = controlUI;
+ lx.setPatterns(patterns);
+ lx.goIndex(restoreToIndex);
+ }
+ break;
+ case 'p':
+ for (PandaDriver p : pandaBoards) {
+ p.toggle();
+ }
+ break;
case 'u':
uiOn = !uiOn;
break;
}
}
+int mx, my;
+void mousePressed() {
+ ui.mousePressed();
+ if (mouseX < ui.leftPos) {
+ if (debugMode) {
+ debugUI.mousePressed();
+ }
+ mx = mouseX;
+ my = mouseY;
+ }
+}
+
+void mouseDragged() {
+ if (mouseX > ui.leftPos) {
+ ui.mouseDragged();
+ } else {
+ int dx = mouseX - mx;
+ int dy = mouseY - my;
+ mx = mouseX;
+ my = mouseY;
+ eyeA += dx*.003;
+ eyeX = midX + eyeR*sin(eyeA);
+ eyeZ = midZ + eyeR*cos(eyeA);
+ eyeY += dy;
+ }
+}
+
+void mouseReleased() {
+ ui.mouseReleased();
+}
+
+void mouseWheel(int delta) {
+ if (mouseX > ui.leftPos) {
+ ui.mouseWheel(delta);
+ } else {
+ eyeR = constrain(eyeR - delta, -500, -80);
+ eyeX = midX + eyeR*sin(eyeA);
+ eyeZ = midZ + eyeR*cos(eyeA);
+ }
+}
repositories / SugarCubes.git / blobdiff