* when physical changes or tuning is being done to the structure.
*/
-class TowerMapping {
- public final float x, y, z;
- public final float[][] cubePositions;
+public Model buildModel() {
+
- TowerMapping(float x, float y, float z, float[][] cubePositions) {
- this.x = x;
- this.y = y;
- this.z = z;
- this.cubePositions = cubePositions;
- }
-}
+ // Shorthand helpers for specifying wiring more quickly
+ final Cube.Wiring WFL = Cube.Wiring.FRONT_LEFT;
+ final Cube.Wiring WFR = Cube.Wiring.FRONT_RIGHT;
+ final Cube.Wiring WRL = Cube.Wiring.REAR_LEFT;
+ final Cube.Wiring WRR = Cube.Wiring.REAR_RIGHT;
+
+ // Utility value if you need the height of a cube shorthand
+ final float CH = Cube.EDGE_HEIGHT;
+
+ // Positions for the bass box
+ final float BBY = BassBox.EDGE_HEIGHT + BoothFloor.PLEXI_WIDTH;
+ final float BBX = 56;
+ final float BBZ = 2;
+
-public Model buildModel() {
// The model is represented as an array of towers. The cubes in the tower
// are represenented relatively. Each tower has an x, y, z reference position,
// which is typically the base cube's bottom left corner.
//
// Following that is an array of floats. A 2-d array contains an x-offset
- // and a z-offset from the reference position. Typically the first cube
- // will just be {0, 0}.
+ // and a z-offset from the previous reference position. Typically the first cube
+ // will just be {0, 0}. Each successive cube uses the position of the previous
+ // cube as its reference.
//
// A 3-d array contains an x-offset, a z-offset, and a rotation about the
// y-axis.
//
// The cubes automatically increment their y-position by Cube.EDGE_HEIGHT.
-
- final float STACKED_RELATIVE = 1;
- final float STACKED_REL_SPIN = 2;
- final float BASS_DEPTH = BassBox.EDGE_DEPTH + 4;
-
- TowerMapping[] mapping = new TowerMapping[] {
- // Front left cubes
-// new TowerMapping(0, 0, 0, new float[][] {
-// {STACKED_RELATIVE, 0, 0},
-// {STACKED_RELATIVE, 5, -10, 20},
-// {STACKED_RELATIVE, 0, -6},
-// {STACKED_RELATIVE, -5, -2, -20},
-// }),
-//
-// new TowerMapping(Cube.EDGE_WIDTH + 2, 0, 0, new float[][] {
-// {STACKED_RELATIVE, 0, 0},
-// {STACKED_RELATIVE, 0, 5, 10},
-// {STACKED_RELATIVE, 0, 2, 20},
-// {STACKED_RELATIVE, 0, 0, 30},
-// }),
+ // To-Do: (Mark Slee, Alex Green, or Ben Morrow): The Cube # is determined by the order in this list. "raw object index" is serialized by running through towermapping and then individual cube mapping below.
+ // We can do better than this. The raw object index should be obvious from the code-- looking through the rendered simulation and counting through cubes in mapping mode is grossly inefficient.
+ TowerMapping[] towerCubes = new TowerMapping[] {
- // Back Cubes behind DJ platform (in order of increasing x)
- new TowerMapping(50, 5, BASS_DEPTH, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, 2, 0, 20},
- {STACKED_RELATIVE, -2, 10},
- {STACKED_RELATIVE, -5, 15, -20},
- {STACKED_RELATIVE, -2, 13},
+
+
+ //back left cubes: temp Channel 1
+ new TowerMapping(0, 3*Cube.EDGE_HEIGHT, 72, new CubeMapping[] {
+ new CubeMapping(0, 14, -45 , WRL), // #1
+ new CubeMapping(10, -12, -20, WFL), //#2
+ new CubeMapping(5, 9, 45, WRR), //#3
+
+
}),
+ //back left cube tower: Channel 2
+ new TowerMapping(0, Cube.EDGE_HEIGHT, 70, new CubeMapping[] {
+ new CubeMapping(18, -2.5, 45, WRL), //#4
+ new CubeMapping(15, -6, 45, WFR), //#5
+ new CubeMapping(-6 , 7, 5, WRR), //#6
+ new CubeMapping(18, 11, -5, WFL)
+
+ }),
- new TowerMapping(79, 5, BASS_DEPTH, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, 2, 0, 20},
- {STACKED_RELATIVE, 4, 10},
- {STACKED_RELATIVE, 2, 15, -20},
- {STACKED_RELATIVE, 0, 13},
- }),
+ //second from left back tower: Channel 3
+ new TowerMapping(31, Cube.EDGE_HEIGHT, 73.5, new CubeMapping[] {
+ new CubeMapping( 12.5, 5.5 , 10 , WRR),
+ new CubeMapping( 16.5, 2.5 , 30, WRR),
+ new CubeMapping( 16.5, 3, 10, WRR),
+ new CubeMapping(.5, 4.5, -10 , WFL)
+ } ),
- new TowerMapping(107, 5, BASS_DEPTH, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, 4, 0, 20},
- {STACKED_RELATIVE, 6, 10},
- {STACKED_RELATIVE, 3, 15, -20},
- // {STACKED_RELATIVE, 8, 13},
- }),
+ //center tower, Channel 4
+ new TowerMapping(106, Cube.EDGE_HEIGHT, 84, new CubeMapping[] {
+ new CubeMapping( -3.5, -2, 10, WFL),
+ new CubeMapping( -11, 5, 30, WFR),
+ new CubeMapping( 13.5, 2, 15, WRR),
+ new CubeMapping(20.75, -4, 35 , WRL)
+ } ),
- new TowerMapping(133, 5, BASS_DEPTH, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, -2, 0, 20},
- {STACKED_RELATIVE, 0, 10},
- {STACKED_RELATIVE, 2, 15, -20},
- // {STACKED_RELATIVE, 4, 13}
- }),
+ //second from back right tower, Channel 5
+
+ new TowerMapping(160, Cube.EDGE_HEIGHT, 78, new CubeMapping[] {
+ new CubeMapping( -31.5, -.5 , 5 , WFR),
+ new CubeMapping( 7, -.5, 60, WRL),
+ new CubeMapping( -5.5, -3, 0, WFR),
+ new CubeMapping(22 , 2 , 30 , WRL)
+ }),
+
- new TowerMapping(165, 5, BASS_DEPTH, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, -1, 20},
- {STACKED_RELATIVE, 2, 10},
- {STACKED_RELATIVE, -2, 15, -20},
- {STACKED_RELATIVE, 3, 13},
- }),
+ //back right cubes: temp Channel 6
+ new TowerMapping(201, Cube.EDGE_HEIGHT, 72, new CubeMapping[] {
+ new CubeMapping(7.5, 6, 25, WRL),
+ new CubeMapping(-4.5, -0.5, 18, WFR),
+ new CubeMapping(8.5, .5, 30, WRL),
+ new CubeMapping(-7, -14, 10, WFR)
+
+ }),
+
- // front DJ cubes
- new TowerMapping((TRAILER_WIDTH - BassBox.EDGE_WIDTH)/2, BassBox.EDGE_HEIGHT, 10, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, 0, -10, 20},
+
+
+
+ //tower to the right of BASS BOX
+ new TowerMapping (192, Cube.EDGE_HEIGHT, 40, new CubeMapping[] {
+ new CubeMapping(-6, 4, -10, WRL),
+ new CubeMapping(5 ,5 , 5, WFR ),
+ new CubeMapping(-2, .5 , -3, WFL),
+ new CubeMapping(-10, 5.5 , -20, WRR )
+ }),
+
+ //end right tower in middle, right of previous tower
+ //new TowerMapping (214, Cube.EDGE_HEIGHT, 37, new CubeMapping[] {
+ //new CubeMapping(10,0 , 50, WRR),
+ //new CubeMapping(5 ,5 , 65, WFL)
+ //}),
+// // DJ booth, from back left to back right
+
+ new TowerMapping(BBX, BBY, BBZ, new CubeMapping[] {
+ new CubeMapping(3, 28, 3, WFL),
+ new CubeMapping(-4, -8, 10, WFR),
+ new CubeMapping(-15, 8, 40, WFR)
+
+
}),
+
- new TowerMapping((TRAILER_WIDTH - BassBox.EDGE_WIDTH)/2 + Cube.EDGE_HEIGHT, BassBox.EDGE_HEIGHT, 10, new float[][] {
- {STACKED_RELATIVE, 3, 0},
- {STACKED_RELATIVE, 2, -10, 20},
+
+ new TowerMapping(BBX, BBY, BBZ, new CubeMapping[] {
+ new CubeMapping(-7.25, 7.5, -25, WFR),
+ new CubeMapping(7.5, -15.75, 12, WRL),
+
+
}),
-
- new TowerMapping((TRAILER_WIDTH - BassBox.EDGE_WIDTH)/2 + 2*Cube.EDGE_HEIGHT + 5, BassBox.EDGE_HEIGHT, 10, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, 1, 0, 10},
+ new TowerMapping(BBX, BBY, BBZ, new CubeMapping[] {
+ new CubeMapping(19.625, 5.375, -22, WFR),
+ new CubeMapping(8, -14.5, 10, WRR),
}),
-
- new TowerMapping((TRAILER_WIDTH - BassBox.EDGE_WIDTH)/2 + 3*Cube.EDGE_HEIGHT + 9, BassBox.EDGE_HEIGHT, 10, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, -1, 0},
+ new TowerMapping(BBX, BBY, BBZ, new CubeMapping[] {
+ new CubeMapping(48, 4.75, -35, WRL),
+ new CubeMapping(8, -15, 10, WRR),
}),
-
- new TowerMapping((TRAILER_WIDTH - BassBox.EDGE_WIDTH)/2 + 4*Cube.EDGE_HEIGHT + 15, BassBox.EDGE_HEIGHT, 10, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, -1, 0},
+ new TowerMapping(BBX, BBY, BBZ, new CubeMapping[] {
+ new CubeMapping(78.75, 3.75, -28, WRR),
+ new CubeMapping(8, -15, 10, WRR),
}),
- // left dj cubes
- new TowerMapping((TRAILER_WIDTH - BassBox.EDGE_WIDTH)/2, BassBox.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 2, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, 0, 2, 20},
- }),
+ // next two are right DJ channel
- new TowerMapping((TRAILER_WIDTH - BassBox.EDGE_WIDTH)/2, BassBox.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 4, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, 0, 2, 20},
- }),
-
- // right dj cubes
- new TowerMapping((TRAILER_WIDTH - BassBox.EDGE_WIDTH)/2 + 4*Cube.EDGE_HEIGHT + 15, BassBox.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 2, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, 0, 2, 20},
- }),
+ new TowerMapping(BBX, BBY, BBZ, new CubeMapping[] {
+ new CubeMapping(105, 20.5, 20, WRR),
+ new CubeMapping(6, -6, 30, WFR),
+ }),
+
+ new TowerMapping(BBX, BBY, BBZ, new CubeMapping[] {
+ new CubeMapping(104.75, 0, -27, WRL),
+ new CubeMapping(8, -15, 10, WFL),
+ }),
- new TowerMapping((TRAILER_WIDTH - BassBox.EDGE_WIDTH)/2 + 4*Cube.EDGE_HEIGHT + 15, BassBox.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 4, new float[][] {
- {STACKED_RELATIVE, 0, 0},
- {STACKED_RELATIVE, 0, 2, 20},
- }),
-
-// new TowerMapping(200, 0, 0, new float[][] {
-// {STACKED_RELATIVE, 0, 10},
-// {STACKED_RELATIVE, 5, 0, 20},
-// {STACKED_RELATIVE, 0, 4},
-// {STACKED_RELATIVE, -5, 8, -20},
-// {STACKED_RELATIVE, 0, 3},
-// }),
-
-// new TowerMapping(0, 0, Cube.EDGE_HEIGHT + 10, new float[][] {
-// {STACKED_RELATIVE, 10, 0, 40},
-// {STACKED_RELATIVE, 3, -2, 20},
-// {STACKED_RELATIVE, 0, 0, 40},
-// {STACKED_RELATIVE, 0, 0, 60},
-// {STACKED_RELATIVE, 0, 0, 40},
-// }),
+
+ };
+
+ // Single cubes can be constructed directly here if you need them
+ Cube[] singleCubes = new Cube[] {
+ // Back left channel behind speaker
+ new Cube(15, int( Cube.EDGE_HEIGHT), 39, 0, 10, 0, WRL),
- new TowerMapping(20, 0, 2*Cube.EDGE_HEIGHT + 18, new float[][] {
- {STACKED_RELATIVE, 0, 0, 40},
- {STACKED_RELATIVE, 10, 0, 20},
- {STACKED_RELATIVE, 5, 0, 40},
- {STACKED_RELATIVE, 10, 0, 60},
- {STACKED_RELATIVE, 12, 0, 40},
- }),
+ // Top left Channel Above DJ booth
-// new TowerMapping(210, 0, Cube.EDGE_HEIGHT + 15, new float[][] {
-// {STACKED_RELATIVE, 0, 0, 40},
-// {STACKED_RELATIVE, 5, 0, 20},
-// {STACKED_RELATIVE, 8, 0, 40},
-// {STACKED_RELATIVE, 3, 0, 60},
-// {STACKED_RELATIVE, 0, 0, 40},
-// }),
+ //new Cube(35, int(5*Cube.EDGE_HEIGHT ), 52, 0, 10, 0, WRR),
+ //new Cube(56, int(5*Cube.EDGE_HEIGHT ), 69, 0, 10, 0, WFL),
+ //new Cube(76, int(5*Cube.EDGE_HEIGHT ), 61, 0, -45, 0, WRL),
- new TowerMapping(210, 0, 2*Cube.EDGE_HEIGHT + 25, new float[][] {
- {STACKED_RELATIVE, 0, 0, 40},
- {STACKED_RELATIVE, 5, 0, 20},
- {STACKED_RELATIVE, 2, 0, 40},
- {STACKED_RELATIVE, 5, 0, 60},
- {STACKED_RELATIVE, 0, 0, 40},
- }),
+ // Next channel to the right, same height
+ //new Cube(85, int(5*Cube.EDGE_HEIGHT ), 77, 0, 20, 0, WRL),
+ //new Cube(92, int(6*Cube.EDGE_HEIGHT ), 63, 0,20, 0, WRR),
+ //new Cube(86, int(6*Cube.EDGE_HEIGHT ), 47, 0, -45, 0, WRL),
+ //new Cube(123, int(6*Cube.EDGE_HEIGHT ), 31, 0, 20, 0, WFR),
+
+ // Next channel to right, same height
+ //new Cube(111, int(5*Cube.EDGE_HEIGHT ), 79, 0, 30, 0, WRL),
+ //new Cube(125, int(6*Cube.EDGE_HEIGHT ), 76, 0,27, 0, WRL),
+ //new Cube(144, int(5*Cube.EDGE_HEIGHT ), 44, 0, 45, 0, WRR),
+ //new Cube(134, int(5*Cube.EDGE_HEIGHT ), 42, 0, 45, 0, WRL),
+
+ // Next channel to right
+ new Cube(185, int(4*Cube.EDGE_HEIGHT ), 73, 0, -45, 0, WRR),
+ //new Cube(170, int(5*Cube.EDGE_HEIGHT ), 58, 0,40, 0, WRL),
+ //new Cube(158, int(6*Cube.EDGE_HEIGHT ), 34, 0, 40, 0, WFR),
+ //new Cube(130, int(6*Cube.EDGE_HEIGHT ), 10, 0, -5, 30, WRL),
+
+ // Next channel highest to the right
+ //new Cube(203, int(5*Cube.EDGE_HEIGHT ), 55, 0, 35, 0, WRR),
+ //new Cube(174, int(5*Cube.EDGE_HEIGHT ), 32, 0,35, 0, WFR),
+ //new Cube(178, int(6.5*Cube.EDGE_HEIGHT ), 16, 0, 20 , 30, WRL),
+ //new Cube(212, int(6.5*Cube.EDGE_HEIGHT ), 23, 0, 20 ,30, WRR),
+
+ // Last channel
+ //new Cube(204, int(5*Cube.EDGE_HEIGHT ), 28, 0, 25, 0, WFR),
+ //new Cube(185, int(6*Cube.EDGE_HEIGHT ), 38, 0,40, 0, WRR),
+ // New cubes above DJ deck
+ new Cube(BBX + 78.5, BBY + 2*Cube.EDGE_HEIGHT, BBZ, 0, 10, 0, WRR),
+ new Cube(BBX + 49.5, BBY + 2*Cube.EDGE_HEIGHT, BBZ - 7, 0, 10, 0, WRR),
+ new Cube(BBX + 13, BBY + 2*Cube.EDGE_HEIGHT, BBZ + 11, 0, -30, 0, WRL),
+ new Cube(BBX - 15, BBY + 2*Cube.EDGE_HEIGHT, BBZ + 30, 0, -35, 0, WRR),
+
+ // New cubes above DJ deck at crazy angles
+ new Cube(BBX - 5, BBY + 3*Cube.EDGE_HEIGHT, BBZ + 15.5, 0, -15, 0, WRL),
+ new Cube(BBX + 27, BBY + 3*Cube.EDGE_HEIGHT, BBZ + 12.5, 0, -18, -15, WRR),
+ new Cube(BBX + 59, BBY + 3*Cube.EDGE_HEIGHT + 4, BBZ + 12.5, -12, 10, -10, WRL),
+ new Cube(BBX + 93, BBY + 3*Cube.EDGE_HEIGHT + 7, BBZ + 20.5, -15, 20, -35, WRR),
+
+ // New cubes on right side of DJ deck
+ new Cube(161, BBY + 2*Cube.EDGE_HEIGHT, 15, 0, -40, 0, WFR),
+ new Cube(161, BBY + 3*Cube.EDGE_HEIGHT, 24, 0, -30, 0, WFL),
+ new Cube(165, BBY + 4*Cube.EDGE_HEIGHT, 41, 0, 5, 0, WFR),
+
+ // New cubes top back left
+ new Cube(BBX + 32, 5*Cube.EDGE_HEIGHT, BBZ + BassBox.EDGE_DEPTH + 7, 0, -25, 0, WFR),
+ new Cube(BBX + 5.5, 5*Cube.EDGE_HEIGHT, BBZ + BassBox.EDGE_DEPTH +7, 0, -25, 0, WFL),
+ new Cube(BBX - 23, 5*Cube.EDGE_HEIGHT, BBZ + BassBox.EDGE_DEPTH + 11, 0, -25, 0, WFL),
+ new Cube(BBX - 33, 5*Cube.EDGE_HEIGHT + 8, BBZ +BassBox.EDGE_DEPTH- 29, 0, 10, 0, WFL),
+
+ // On top of previous channel
+ new Cube(BBX + 22, 6*Cube.EDGE_HEIGHT, BBZ + BassBox.EDGE_DEPTH , 0, 5, 0, WRL),
+ new Cube(BBX + 27, 6*Cube.EDGE_HEIGHT - 13, BBZ + BassBox.EDGE_DEPTH- 25, 0, 3, -20, WRR),
+ new Cube(BBX +5, 6*Cube.EDGE_HEIGHT - 13, BBZ + BassBox.EDGE_DEPTH -27, 0, 5, -15, WRL),
+ new Cube(BBX - 11, 6*Cube.EDGE_HEIGHT -1.5, BBZ +BassBox.EDGE_DEPTH - 11, 0, 30, 0, WRR),
+
+ // Top center
+ new Cube(BBX +37, 6*Cube.EDGE_HEIGHT, BBZ + BassBox.EDGE_DEPTH +13 , 0, 15, 0, WRR),
+ new Cube(BBX + 64, 6*Cube.EDGE_HEIGHT, BBZ + BassBox.EDGE_DEPTH + 25, 0, 15, 0, WFR),
+ new Cube(BBX + 64, 6*Cube.EDGE_HEIGHT - 3, BBZ + BassBox.EDGE_DEPTH -4 , 0, 0, -30, WRL),
+ new Cube(BBX + 87.5, 6*Cube.EDGE_HEIGHT + 13, BBZ +BassBox.EDGE_DEPTH - 10, 0, 0, 0, WRL),
+
+ // Top right
+ new Cube(BBX + 76, 107.5, BBZ + BassBox.EDGE_DEPTH + 23, 0, -40, 0, WRR),
+ new Cube(BBX + 98, 129, BBZ + BassBox.EDGE_DEPTH - 5, 0, 10, 0, WRR),
+ new Cube(BBX + 104, 107.5, BBZ + BassBox.EDGE_DEPTH + 17, 0, -35, 0, WRR),
+ new Cube(BBX + 129, 107.5, BBZ +BassBox.EDGE_DEPTH +10, 0, -35, 0, WFL),
+
+ new Cube(179, 4*Cube.EDGE_HEIGHT, BBZ + BassBox.EDGE_DEPTH + 14,0, -20, 0 , WFR),
+
+ // Lonely cube at top left, one cube channel
+ new Cube(BBX - 36, 4*Cube.EDGE_HEIGHT + 8, BBZ +BassBox.EDGE_DEPTH- 38, 0, 10, 0, WFL)
+
+ // new Cube(x, y, z, rx, ry, rz, wiring),
};
+ // The bass box!
+ /*
+ BassBox bassBox = new BassBox(BBX, 0, BBZ);
+
+ // The speakers!
+ List<Speaker> speakers = Arrays.asList(new Speaker[] {
+ // Each speaker parameter is x, y, z, rotation, the left speaker comes first
+ new Speaker(-12, 6, 0, 15),
+ new Speaker(TRAILER_WIDTH - Speaker.EDGE_WIDTH + 8, 6, 3, -15)
+ });
+ */
+
+ //////////////////////////////////////////////////////////////////////
+ // BENEATH HERE SHOULD NOT REQUIRE ANY MODIFICATION!!!! //
+ //////////////////////////////////////////////////////////////////////
+
+ // These guts just convert the shorthand mappings into usable objects
ArrayList<Tower> towerList = new ArrayList<Tower>();
ArrayList<Cube> tower;
- Cube[] cubes = new Cube[79];
+ Cube[] cubes = new Cube[80];
int cubeIndex = 1;
- float tx, ty, tz, px, pz, ny, dx, dz, ry;
- for (TowerMapping tm : mapping) {
+ float px, pz, ny;
+ for (TowerMapping tm : towerCubes) {
+ px = tm.x;
+ ny = tm.y;
+ pz = tm.z;
tower = new ArrayList<Cube>();
- px = tx = tm.x;
- ny = ty = tm.y;
- pz = tz = tm.z;
- int ti = 0;
- for (float[] cp : tm.cubePositions) {
- float mode = cp[0];
- if (mode == STACKED_RELATIVE) {
- dx = cp[1];
- dz = cp[2];
- ry = (cp.length >= 4) ? cp[3] : 0;
- tower.add(cubes[cubeIndex++] = new Cube(px = tx + dx, ny, pz = tz + dz, 0, ry, 0));
- ny += Cube.EDGE_HEIGHT;
- } else if (mode == STACKED_REL_SPIN) {
- // Same as above but the front left of this cube is actually its back right for wiring
- // TODO(mcslee): implement this
- }
+ for (CubeMapping cm : tm.cubeMappings) {
+ tower.add(cubes[cubeIndex++] = new Cube(px = px + cm.dx, ny, pz = pz + cm.dz, 0, cm.ry, 0, cm.wiring));
+ ny += Cube.EDGE_HEIGHT;
}
towerList.add(new Tower(tower));
}
+ for (Cube cube : singleCubes) {
+ cubes[cubeIndex++] = cube;
+ }
- BassBox bassBox = new BassBox(56, 0, 2);
-
- List<Speaker> speakers = new ArrayList<Speaker>();
- speakers.add(new Speaker(0, 6, 0, 15));
- speakers.add(new Speaker(TRAILER_WIDTH - Speaker.EDGE_WIDTH, 6, 6, -15));
-
- return new Model(towerList, cubes, bassBox, speakers);
+ return new Model(towerList, cubes, null, null);
}
+/**
+ * This function maps the panda boards. We have an array of them, each has
+ * an IP address and a list of channels.
+ */
public PandaMapping[] buildPandaList() {
+ final int LEFT_SPEAKER = 0;
+ final int RIGHT_SPEAKER = 1;
+
+ // 8 channels map to: 3, 4, 7, 8, 13, 14, 15, 16.
return new PandaMapping[] {
new PandaMapping(
- "10.200.1.28", new int[][] {
- { 1, 2, 3, 4 }, // ch1
- { 5, 6, 7, 8 }, // ch2
- { 9, 10, 11, 12 }, // ch3
- { 13, 14, 15, 16 }, // ch4
- { 17, 18, 19, 20 }, // ch5
- { 21, 22, 23, 24 }, // ch6
- { 25, 26, 27, 28 }, // ch7
- { 29, 30, 31, 32 }, // ch8
+ "10.200.1.30", new ChannelMapping[] {
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 39, 40, 41, 42 }), // 30 J3 *
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 37, 38, 36, 35}), // 30 J4 //ORIG *
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 20, 21, 22, 23}), // 30 J7 *
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 16, 17, 18, 19}), // 30 J8 *
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }), // 30 J13 (not working)
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }), // 30 J14 (unplugged)
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }), // 30 J15 (unplugged)
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 53, 54, 55, 72 }), // 30 J16
}),
-
new PandaMapping(
- "10.200.1.29", new int[][] {
- { 33, 34, 35, 36 }, // ch9
- { 37, 38, 39, 40 }, // ch10
- { 41, 42, 43, 44 }, // ch11
- { 45, 46, 47, 48 }, // ch12
- { 33, 34, 35, 36 }, // ch13
- { 37, 38, 39, 40 }, // ch14
- { 41, 42, 43, 44 }, // ch15
- { 45, 46, 47, 48 }, // ch16
+ "10.200.1.29", new ChannelMapping[] {
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }), // 29 J3 (not connected)
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }), // 29 J4 (not connected)
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 28, 29, 30, 2}), // 29 J7
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 33, 34, 32, 31}), // 29 J8 //XXX
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }), // 29 J13 //XX //bassbox (not working)
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }), // 29 J14 (not working)
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 12, 13, 14, 15 }), // 29 J15
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 8, 9, 10, 11 }), // 29 J16
+ }),
+ new PandaMapping(
+ "10.200.1.28", new ChannelMapping[] {
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 60, 61, 62, 63 }), // 28 J3
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 56, 57, 58, 59}), // 28 J4
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 45, 46, 47, 48 }), // 28 J7
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }), // 28 J8
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 4, 5, 6, 7}), // 28 J13
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 64, 65, 66, 67 }), // 28 J14
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 68, 69, 70, 71 }), // 28 J15
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 49, 50, 51, 52}), // 28 J16
+ }),
+ new PandaMapping(
+ "10.200.1.31", new ChannelMapping[] {
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }),
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }),
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }),
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 24, 25, 26, 27}), // 31 J8
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }),
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }),
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { 73 }),
+ new ChannelMapping(ChannelMapping.MODE_CUBES, new int[] { }), // 31 J16
}),
-
};
}
+class TowerMapping {
+ public final float x, y, z;
+ public final CubeMapping[] cubeMappings;
+
+ TowerMapping(float x, float y, float z, CubeMapping[] cubeMappings) {
+ this.x = x;
+ this.y = y;
+ this.z = z;
+ this.cubeMappings = cubeMappings;
+ }
+}
+
+class CubeMapping {
+ public final float dx, dz, ry;
+ public final Cube.Wiring wiring;
+
+ CubeMapping(float dx, float dz, Cube.Wiring wiring) {
+ this(dx, dz, 0, wiring);
+ }
+
+ CubeMapping(float dx, float dz, float ry) {
+ this(dz, dz, ry, Cube.Wiring.FRONT_LEFT);
+ }
+
+ CubeMapping(float dx, float dz, float ry, Cube.Wiring wiring) {
+ this.dx = dx;
+ this.dz = dz;
+ this.ry = ry;
+ this.wiring = wiring;
+ }
+}
+
+/**
+ * Each panda board has an IP address and a fixed number of channels. The channels
+ * each have a fixed number of pixels on them. Whether or not that many physical
+ * pixels are connected to the channel, we still send it that much data.
+ */
class PandaMapping {
// How many channels are on the panda board
public final static int CHANNELS_PER_BOARD = 8;
- // How many cubes per channel xc_PB is configured for
- public final static int CUBES_PER_CHANNEL = 4;
-
- // How many total pixels on each channel
- public final static int PIXELS_PER_CHANNEL = Cube.POINTS_PER_CUBE * CUBES_PER_CHANNEL;
-
// How many total pixels on the whole board
- public final static int PIXELS_PER_BOARD = PIXELS_PER_CHANNEL * CHANNELS_PER_BOARD;
+ public final static int PIXELS_PER_BOARD = ChannelMapping.PIXELS_PER_CHANNEL * CHANNELS_PER_BOARD;
final String ip;
- final int[][] channelList = new int[CHANNELS_PER_BOARD][CUBES_PER_CHANNEL];
+ final ChannelMapping[] channelList = new ChannelMapping[CHANNELS_PER_BOARD];
- PandaMapping(String ip, int[][] rawChannelList) {
+ PandaMapping(String ip, ChannelMapping[] rawChannelList) {
this.ip = ip;
- for (int chi = 0; chi < CHANNELS_PER_BOARD; ++chi) {
- int[] cubes = (chi < rawChannelList.length) ? rawChannelList[chi] : new int[]{};
- for (int cui = 0; cui < CUBES_PER_CHANNEL; ++cui) {
- channelList[chi][cui] = (cui < cubes.length) ? cubes[cui] : 0;
+
+ // Ensure our array is the right length and has all valid items in it
+ for (int i = 0; i < channelList.length; ++i) {
+ channelList[i] = (i < rawChannelList.length) ? rawChannelList[i] : new ChannelMapping();
+ if (channelList[i] == null) {
+ channelList[i] = new ChannelMapping();
}
}
}
}
+/**
+ * Each channel on a pandaboard can be mapped in a number of modes. The typical is
+ * to a series of connected cubes, but we also have special mappings for the bass box,
+ * the speaker enclosures, and the DJ booth floor.
+ *
+ * This class is just the mapping meta-data. It sanitizes the input to make sure
+ * that the cubes and objects being referenced actually exist in the model.
+ *
+ * The logic for how to encode the pixels is contained in the PandaDriver.
+ */
+class ChannelMapping {
+
+ // How many cubes per channel xc_PB is configured for
+ public final static int CUBES_PER_CHANNEL = 4;
+ // How many total pixels on each channel
+ public final static int PIXELS_PER_CHANNEL = Cube.POINTS_PER_CUBE * CUBES_PER_CHANNEL;
+
+ public static final int MODE_NULL = 0;
+ public static final int MODE_CUBES = 1;
+ public static final int MODE_BASS = 2;
+ public static final int MODE_SPEAKER = 3;
+ public static final int MODE_STRUTS_AND_FLOOR = 4;
+ public static final int MODE_INVALID = 5;
+
+ public static final int NO_OBJECT = -1;
+
+ final int mode;
+ final int[] objectIndices = new int[CUBES_PER_CHANNEL];
+
+ ChannelMapping() {
+ this(MODE_NULL);
+ }
+
+ ChannelMapping(int mode) {
+ this(mode, new int[]{});
+ }
+
+ ChannelMapping(int mode, int rawObjectIndex) {
+ this(mode, new int[]{ rawObjectIndex });
+ }
+
+ ChannelMapping(int mode, int[] rawObjectIndices) {
+ if (mode < 0 || mode >= MODE_INVALID) {
+ throw new RuntimeException("Invalid channel mapping mode: " + mode);
+ }
+ if (mode == MODE_SPEAKER) {
+ if (rawObjectIndices.length != 1) {
+ throw new RuntimeException("Speaker channel mapping mode must specify one speaker index");
+ }
+ int speakerIndex = rawObjectIndices[0];
+ if (speakerIndex < 0 || speakerIndex >= glucose.model.speakers.size()) {
+ throw new RuntimeException("Invalid speaker channel mapping: " + speakerIndex);
+ }
+ } else if ((mode == MODE_STRUTS_AND_FLOOR) || (mode == MODE_BASS) || (mode == MODE_NULL)) {
+ if (rawObjectIndices.length > 0) {
+ throw new RuntimeException("Bass/floor/null mappings cannot specify object indices");
+ }
+ } else if (mode == MODE_CUBES) {
+ for (int rawCubeIndex : rawObjectIndices) {
+ if (glucose.model.getCubeByRawIndex(rawCubeIndex) == null) {
+ throw new RuntimeException("Non-existing cube specified in cube mapping: " + rawCubeIndex);
+ }
+ }
+ }
+
+ this.mode = mode;
+ for (int i = 0; i < objectIndices.length; ++i) {
+ objectIndices[i] = (i < rawObjectIndices.length) ? rawObjectIndices[i] : NO_OBJECT;
+ }
+ }
+}