+++ /dev/null
-class SineSphere extends SCPattern {
-<<<<<<< HEAD
- private SawLFO yrot = new SawLFO(0, TWO_PI, 3000);
- private SawLFO yrot2 = new SawLFO(0, -TWO_PI, 8000);
- public BasicParameter huespread = new BasicParameter("Hue", 0, 180);
- public BasicParameter widthparameter= new BasicParameter("Width", .2);
- private int pitch = 0;
- private int channel = 0;
- private int velocity = 0;
- public final Projection sinespin;
- public final Projection sinespin2;
-
- //to-do: how to sync all hues across sphery's via one basicparameter
- //public BasicParameter huespread = new BasicParameter("HueSpread", 180, 360);
- public BasicParameter rotationx = new BasicParameter("rotx", 0, 0, 1 );
- public BasicParameter rotationy = new BasicParameter("roty", 1, 0, 1);
- public BasicParameter rotationz = new BasicParameter("rotz", 0, 0, 1);
-
-=======
- private SinLFO yrot = new SinLFO(0, TWO_PI, 2000);
- public final LXProjection sinespin;
->>>>>>> b8bb27489db7dc687bf150576e9d9439f1fa17a6
- float modelrad = sqrt((model.xMax)*(model.xMax) + (model.yMax)*(model.yMax) + (model.zMax)*(model.zMax));
- Pick Sshape;
- public final PVector P = new PVector();
-
- class Sphery {
- float f1xcenter, f1ycenter, f1zcenter, f2xcenter , f2ycenter, f2zcenter; //second three are for an ellipse with two foci
- private SinLFO vibration;
- private SinLFO surface;
- private SinLFO vx;
- private SinLFO xbounce;
- public SinLFO ybounce;
- private SinLFO zbounce;
- float vibration_min, vibration_max, vperiod;
-
- //public BasicParameter huespread;
- public BasicParameter bouncerate;
- public BasicParameter bounceamp;
- public BasicParameter vibrationrate;
- public final PVector circlecenter = new PVector();
-
- public Sphery(float f1xcenter, float f1ycenter, float f1zcenter, float vibration_min, float vibration_max, float vperiod)
- {
- this.f1xcenter = f1xcenter;
- this.f1ycenter = f1ycenter;
- this.f1zcenter = f1zcenter;
- this.vibration_min = vibration_min;
- this.vibration_max = vibration_max;
- this.vperiod = vperiod;
- //addParameter(bounceamp = new BasicParameter("Amp", .5));
- //addParameter(bouncerate = new BasicParameter("Rate", .5)); //ybounce.modulateDurationBy(bouncerate);
- //addParameter(vibrationrate = new BasicParameter("vibration", 1000, 10000));
- //addParameter(widthparameter = new BasicParameter("Width", .2));
-
-
- addModulator( vx = new SinLFO(500, 10000, 100000)).trigger() ;
- //addModulator(xbounce = new SinLFO(model.xMax/3, 2*model.yMax/3, 2000)).trigger();
- addModulator(ybounce= new SinLFO(model.yMax/3, 2*model.yMax/3, 240000./lx.tempo.bpm())).trigger(); //bounce.modulateDurationBy
-
- //addModulator(bounceamp); //ybounce.setMagnitude(bouncerate);
- addModulator( vibration = new SinLFO(vibration_min , vibration_max, 10000)).trigger(); //vibration.setPeriod(240000/lx.tempo.bpm());
-
- }
-
- //for an ellipse
-// public Sphery(float f1xcenter, float f1ycenter, float f1zcenter, float f2xcenter, float f2ycenter, float f2zcenter,
-// float vibration_min, float vibration_max, float vperiod)
-
-// {
-// this.f1xcenter = f1xcenter;
-// this.f1ycenter = f1ycenter;
-// this.f1zcenter = f1zcenter;
-// this.f2xcenter = f2xcenter;
-// this.f2ycenter = f2ycenter;
-// this.f2zcenter = f2zcenter;
-// this.vibration_min = vibration_min;
-// this.vibration_max = vibration_max;
-// this.vperiod = vperiod;
-// //addModulator(xbounce = new SinLFO(model.xMax/3, 2*model.yMax/3, 2000)).trigger();
-// addModulator(ybounce).trigger();
-// addModulator( vibration = new SinLFO(vibration_min , vibration_max, lx.tempo.rampf())).trigger(); //vibration.modulateDurationBy(vx);
-// addParameter(widthparameter = new BasicParameter("Width", .1));
-// //addParameter(huespread = new BasicParameter("bonk", .2));
-
-// }
-
-
-
-void setVibrationPeriod(double period){
-// to-do: make this conditional upon time signature
-
-vibration.setPeriod(period);
-
-}
-
-
-float distfromcirclecenter(float px, float py, float pz, float f1x, float f1y, float f1z)
-{
- return dist(px, py, pz, f1x, f1y, f1z);
- }
- //void updatespherey(deltaMs, )
-
- float quadrant(PVector q) {
- float qtheta = atan2( (q.x-f1xcenter) , (q.z - f1zcenter) );
-
-
- return map(qtheta, -PI/2, PI/2, 160-huespread.getValuef(), 240 +huespread.getValuef());
- //if (q.x > f1xcenter ) {return 140 ;}
- //else {return 250;}
- }
- color spheryvalue (PVector p, float f1xcenter, float f1ycenter, float f1zcenter) {
- circlecenter.set(f1xcenter, f1ycenter, f1zcenter);
-
-
-//switch(sShpape.cur() ) {}
-
- float b = max(0, 100 - 100*widthparameter.getValuef()*abs(p.dist(circlecenter)
- - vibration.getValuef() ) );
-
- if (b <= 0) {
- return 0;
- }
-
- return lx.hsb(
- constrain(quadrant(p), 0, 360),
- 80,
- b
- );
- }
- color ellipsevalue(float px, float py, float pz , float f1xc, float f1yc, float f1zc, float f2xc, float f2yc, float f2zc)
- {
-//switch(sShpape.cur() ) {}
- return lx.hsb(huespread.getValuef()*5*px, dist(model.xMax-px, model.yMax-py, model.zMax-pz, f1xc, f1yc, f1zc) ,
- max(0, 100 - 100*widthparameter.getValuef() *
- abs( (dist(px, py, pz, f1xc, ybounce.getValuef(), f1zc) +
- (dist(px, py , pz, f2xc, ybounce.getValuef(), f2zc) ) )/2
- - 1.2*vibration.getValuef() ) ) ) ;
- }
-
-void run(double deltaMs) {
- float vv = vibration.getValuef();
- float ybv = ybounce.getValuef();
-
- }
-
-}
-
-// public boolean gridPressed(int row, int co){
-// midiengine.grid.setState();
-
-// return true;
-
-// }
-
-public boolean noteOn(Note note) {
-pitch= note.getPitch();
-velocity=note.getVelocity();
-channel=note.getChannel();
-return true;
-}
-
-final Sphery[] spherys;
-
- SineSphere(GLucose glucose)
- {
- super(glucose);
-<<<<<<< HEAD
- sinespin = new Projection(model);
- sinespin2 = new Projection(model);
- addParameter(huespread);
- addParameter(rotationx);
- addParameter(rotationy);
- addParameter(rotationz);
-=======
- sinespin = new LXProjection(model);
->>>>>>> b8bb27489db7dc687bf150576e9d9439f1fa17a6
- addModulator(yrot).trigger();
- addModulator(yrot2).trigger();
-
- //addParameter(huespread);
- //Sshape = addPick("Shape", , 1);
- spherys = new Sphery[] {
- new Sphery(model.xMax/4, model.yMax/2, model.zMax/2, modelrad/16, modelrad/8, 3000),
- new Sphery(.75*model.xMax, model.yMax/2, model.zMax/2, modelrad/20, modelrad/10, 2000),
- new Sphery(model.xMax/2, model.yMax/2, model.zMax/2, modelrad/4, modelrad/8, 2300),
-
- new Sphery(.3*model.xMax, .4*model.yMax, .6*model.zMax, modelrad/16, modelrad/8, 4000),
- new Sphery(.75*model.xMax, model.yMax/2, model.zMax/2, modelrad/20, modelrad/10, 2000),
- new Sphery(model.xMax/2, model.yMax/2, model.zMax/2, modelrad/4, modelrad/8, 2300),
-
- };
- }
-
-// public void onParameterChanged(LXParameter parameter)
-// {
-
-
-// for (Sphery s : spherys) {
-// if (s == null) continue;
-// double bampv = s.bounceamp.getValue();
-// double brv = s.bouncerate.getValue();
-// double tempobounce = lx.tempo.bpm();
-// if (parameter == s.bounceamp)
-// {
-// s.ybounce.setRange(bampv*model.yMax/3 , bampv*2*model.yMax/3, brv);
-// }
-// else if ( parameter == s.bouncerate )
-// {
-// s.ybounce.setDuration(120000./tempobounce);
-// }
-// }
-// }
-
-<<<<<<< HEAD
- public void run( double deltaMs) {
- double t = lx.tempo.ramp();
- double bpm = lx.tempo.bpm();
- spherys[0].run(deltaMs);
- spherys[1].run(deltaMs);
- spherys[2].run(deltaMs);
- spherys[3].run(deltaMs);
-
-
- switch (pitch)
- {
- case 53: t = .5*t; bpm = .5*bpm; break;
-=======
- void run( double deltaMs) {
- float t = lx.tempo.rampf();
- float bpm = lx.tempo.bpmf();
- //spherys[1].run(deltaMs);
- //spherys[2].run(deltaMs);
- //spherys[3].run(deltaMs);]
- sinespin.reset()
-
- // Translate so the center of the car is the origin, offset by yPos
- .center()
->>>>>>> b8bb27489db7dc687bf150576e9d9439f1fa17a6
-
- case 54: t = t; bpm = bpm; break;
-
- case 55: t = 2*t; bpm = 2*bpm; break;
-
- default: t= t; bpm = bpm;
-
-<<<<<<< HEAD
-=======
- for (LXPoint p : model.points){
- color c = 0;
- c = blendColor(c, spherys[1].spheryvalue(p.x, p.y, p.z, .75*model.xMax, model.yMax/2, model.zMax/2), ADD);
- c = blendColor(c, spherys[0].spheryvalue(p.x, p.y, p.z, model.xMax/4, model.yMax/4, model.zMax/2), ADD);
- c = blendColor(c, spherys[2].spheryvalue(p.x, p.y, p.z, model.xMax/2, model.yMax/2, model.zMax/2),ADD);
->>>>>>> b8bb27489db7dc687bf150576e9d9439f1fa17a6
-
- }
-
- for ( Sphery s: spherys){
- s.setVibrationPeriod(480000/bpm);
- s.vibration.setBasis(t);
- }
- sinespin.reset(model)
-
-
- // Translate so the center of the car is the origin, offset
- .translateCenter(model, 0, 0, 0)
- // .scale(1.3,1.3,1.3)
- // Rotate around the origin (now the center of the car) about an y-vector
- .rotate(yrot.getValuef(), rotationx.getValuef(), rotationy.getValuef() , rotationz.getValuef())
- .translate(model.cx, model.cy, model.cz);
-
-
-
-
-
- for (Coord p: sinespin)
- // for (Point p: model.points)
- {
- P.set(p.x, p.y, p.z);
- // PVector P = new PVector(p.x, p.y, p.z);
- color c = #000000;
- c = blendIfColor(c, spherys[1].spheryvalue(P, .75*model.xMax, model.yMax/2, model.zMax/2), ADD);
- c = blendIfColor(c, spherys[0].spheryvalue(P, model.xMax/4, model.yMax/4, model.zMax/2), ADD);
- c = blendIfColor(c, spherys[2].spheryvalue(P, model.xMax/2, model.yMax/2, model.zMax/2),ADD);
-
-
- colors[p.index] = c;
-
-
- }
- sinespin2.reset(model).
- translateCenter(model,0,0,0).
- rotate(yrot2.getValuef(), 0, 1, 0).
- translate(model.cx,model.cy,model.cz);
-
- for (Coord p: sinespin2)
- { color c = 0;
- // PVector P = new PVector(p.x, p.y, p.z);
- P.set(p.x, p.y, p.z);
- c = blendIfColor(c, spherys[3].spheryvalue(P, .3*model.xMax, .7*model.yMax, .6*model.zMax),ADD);
-
- colors[p.index] = blendIfColor(colors[p.index], c , ADD);
-
- }
-
-
-
- }
-
- color blendIfColor(color c1, color c2, int mode) {
- if (c2 != 0) {
- return blendColor(c1, c2, mode);
- }
- return c1;
- }
-
-
- // color c = 0;
- // c = blendColor(c, spherys[3].ellipsevalue(Px.x, Px.y, Px.z, model.xMax/4, model.yMax/4, model.zMax/4, 3*model.xMax/4, 3*model.yMax/4, 3*model.zMax/4),ADD);
- // return c;
- // }
- // return lx.hsb(0,0,0);
- // // else if(spheremode ==2)
- // { color c = 0;
- // return lx.hsb(CalcCone( (xyz by = new xyz(0,spherys[2].ybounce.getValuef(),0) ), Px, mid) );
-
- // }
-
-
- // }
-
- }
-
-class CubeCurl extends SCPattern{
-float CH, CW, diag;
-ArrayList<PVector> cubeorigin = new ArrayList<PVector>();
-ArrayList<PVector> centerlist = new ArrayList<PVector>();
-private SinLFO curl = new SinLFO(0, Cube.EDGE_HEIGHT, 5000 );
-
-private SinLFO bg = new SinLFO(180, 220, 3000);
-
-CubeCurl(GLucose glucose){
-super(glucose);
-addModulator(curl).trigger();
-addModulator(bg).trigger();
- this.CH = Cube.EDGE_HEIGHT;
- this.CW = Cube.EDGE_WIDTH;
- this.diag = sqrt(CW*CW + CW*CW);
-
-
-ArrayList<PVector> centerlistrelative = new ArrayList<PVector>();
-for (int i = 0; i < model.cubes.size(); i++){
- Cube a = model.cubes.get(i);
- cubeorigin.add(new PVector(a.x, a.y, a.z));
- centerlist.add(new PVector(a.cx, a.cy, a.cz) );
-
-}
-
-}
-//there is definitely a better way of doing this!
-PVector centerofcube(int i) {
-Cube c = model.cubes.get(i);
-
-println(" cube #: " + i + " c.x " + c.x + " c.y " + c.y + " c.z " + c.z );
-// PVector cubeangle = new PVector(c.rx, c.ry, c.rz);
-println("raw x angle: " + c.rx + "raw y angle: " + c.ry + "raw z angle: " + c.rz);
-PVector cubecenter = new PVector(c.x + CW/2, c.y + CH/2, c.z + CW/2);
-println("cubecenter unrotated: " + cubecenter.x + " " +cubecenter.y + " " +cubecenter.z );
-PVector centerrot = new PVector(cos(c.rx)*CW/2 - sin(c.rx)*CW/2, cubecenter.y, cos(c.rz)*CW/2 + sin(c.rz)*CW/2);
- // nCos*(y-o.y) - nSin*(z-o.z) + o.y
-cubecenter = PVector.add(new PVector(c.x, c.y, c.z), centerrot);
-println( " cubecenter.x " + cubecenter.x + " cubecenter.y " + cubecenter.y + " cubecenter.z " + cubecenter.z + " ");
-
-
-return cubecenter;
-}
-
-
-void run(double deltaMs){
-for (int i =0; i < model.cubes.size(); i++) {
-Cube c = model.cubes.get(i);
-float cfloor = c.y;
-
-// if (i%3 == 0){
-
-// for (LXPoint p : c.points ){
-// // colors[p.index]=color(0,0,0);
-// //float dif = (p.y - c.y);
-// //colors[p.index] = color( bg.getValuef() , 80 , dif < curl.getValuef() ? 80 : 0, ADD);
-// }
-// }
-
-// else if (i%3 == 1) {
-
-// for (LXPoint p: c.points){
-// colors[p.index]=color(0,0,0);
-// float dif = (p.y - c.y);
-// // colors[p.index] =
-// // color(bg.getValuef(),
-// // map(curl.getValuef(), 0, Cube.EDGE_HEIGHT, 20, 100),
-// // 100 - 10*abs(dif - curl.getValuef()), ADD );
-// }
-// }
-// else if (i%3 == 2){
- // centerlist[i].sub(cubeorigin(i);
- for (LXPoint p: c.points) {
- PVector pv = new PVector(p.x, p.y, p.z);
- colors[p.index] =color( constrain(4* pv.dist(centerlist.get(i)), 0, 360) , 50, 100 );
- // colors[p.index] =color(constrain(centerlist[i].x, 0, 360), constrain(centerlist[i].y, 0, 100), );
-
-
- }
-
-
- //}
-
- }
- }
- }
-
- class HueTestHSB extends SCPattern{
- BasicParameter HueT = new BasicParameter("Hue", .5);
- BasicParameter SatT = new BasicParameter("Sat", .5);
- BasicParameter BriT = new BasicParameter("Bright", .5);
-
-HueTestHSB(GLucose glucose) {
- super(glucose);
- addParameter(HueT);
- addParameter(SatT);
- addParameter(BriT);
-}
- void run(double deltaMs){
-
- for (LXPoint p : model.points) {
- color c = 0;
- c = blendColor(c, lx.hsb(360*HueT.getValuef(), 100*SatT.getValuef(), 100*BriT.getValuef()), ADD);
- colors[p.index]= c;
- }
- int now= millis();
- if (now % 1000 <= 20)
- {
- println("Hue: " + 360*HueT.getValuef() + "Sat: " + 100*SatT.getValuef() + "Bright: " + 100*BriT.getValuef());
- }
- }
-
- }
repositories / SugarCubes.git / blobdiff