class SineSphere extends SCPattern {
- float modelrad = sqrt((model.xMax)*(model.xMax) + (model.yMax)*(model.yMax) + (model.zMax)*(model.zMax));
- private final SinLFO rs = new SinLFO(0, 180, 5000);
- private final SinLFO noisey = new SinLFO(modelrad/8.0, modelrad/4.0, 2300);
- private final SinLFO band = new SinLFO (0, 10, 2000);
- PVector modelcenter = new PVector(model.xMax, model.yMax, model.zMax);
- BasicParameter widthparameter = new BasicParameter("Width", 10);
-
-
+ private SinLFO yrot = new SinLFO(0, TWO_PI, 2000);
+ public final LXProjection sinespin;
+ float modelrad = sqrt((model.xMax)*(model.xMax) + (model.yMax)*(model.yMax) + (model.zMax)*(model.zMax));
+ Pick Sshape;
+ public final PVector P = new PVector();
+
class Sphery {
- float f1xcenter, f1ycenter, f1zcenter, f2xcenter, f2ycenter, f2zcenter;
+ float f1xcenter, f1ycenter, f1zcenter, f2xcenter , f2ycenter, f2zcenter; //second three are for an ellipse with two foci
private SinLFO vibration;
private SinLFO surface;
private SinLFO vx;
+ private SinLFO xbounce;
+ public SinLFO ybounce;
+ private SinLFO zbounce;
float vibration_min, vibration_max, vperiod;
-
- Sphery(float f1xcenter, float f1ycenter, float f1zcenter, float vibration_min, float vibration_max, float vperiod) {
+ public BasicParameter widthparameter;
+ public BasicParameter huespread;
+ public BasicParameter bouncerate;
+ public BasicParameter bounceamp;
+
+ public Sphery(float f1xcenter, float f1ycenter, float f1zcenter, float vibration_min, float vibration_max, float vperiod)
+ {
this.f1xcenter = f1xcenter;
this.f1ycenter = f1ycenter;
this.f1zcenter = f1zcenter;
this.vibration_min = vibration_min;
this.vibration_max = vibration_max;
this.vperiod = vperiod;
- addModulator( vibration = new SinLFO(vibration_min , vibration_max, vperiod)).trigger(); vibration.modulateDurationBy(vx);
- addModulator( vx = new SinLFO(-1000, 1000, 10000)).trigger();
- }
- float distfromcirclecenter(float px, float py, float pz, float f1x, float f1y, float f1z) {
+ addParameter(bounceamp = new BasicParameter("Amp", .5));
+ addParameter(bouncerate = new BasicParameter("Rate", .5)); //ybounce.modulateDurationBy(bouncerate);
+ addParameter(widthparameter = new BasicParameter("Width", .1));
+ addParameter(huespread = new BasicParameter("Hue", .2));
+
+ addModulator( vx = new SinLFO(-4000, 10000, 100000)).trigger() ;
+ //addModulator(xbounce = new SinLFO(model.xMax/3, 2*model.yMax/3, 2000)).trigger();
+ addModulator(ybounce= new SinLFO(model.yMax/3, 2*model.yMax/3, 240000./lx.tempo.bpm())).trigger(); //ybounce.modulateDurationBy
+
+ //addModulator(bounceamp); //ybounce.setMagnitude(bouncerate);
+ addModulator( vibration = new SinLFO(vibration_min , vibration_max, 240000./lx.tempo.bpm())).trigger(); //vibration.modulateDurationBy(vx);
+
+ }
+ public Sphery(float f1xcenter, float f1ycenter, float f1zcenter, float f2xcenter, float f2ycenter, float f2zcenter,
+ float vibration_min, float vibration_max, float vperiod)
+ {
+ this.f1xcenter = f1xcenter;
+ this.f1ycenter = f1ycenter;
+ this.f1zcenter = f1zcenter;
+ this.f2xcenter = f2xcenter;
+ this.f2ycenter = f2ycenter;
+ this.f2zcenter = f2zcenter;
+ this.vibration_min = vibration_min;
+ this.vibration_max = vibration_max;
+ this.vperiod = vperiod;
+ //addModulator(xbounce = new SinLFO(model.xMax/3, 2*model.yMax/3, 2000)).trigger();
+ addModulator(ybounce).trigger();
+ addModulator( vibration = new SinLFO(vibration_min , vibration_max, lx.tempo.rampf())).trigger(); //vibration.modulateDurationBy(vx);
+ addParameter(widthparameter = new BasicParameter("Width", .1));
+ addParameter(huespread = new BasicParameter("Hue", .2));
+
+}
+
+
+
+
+
+float distfromcirclecenter(float px, float py, float pz, float f1x, float f1y, float f1z)
+{
return dist(px, py, pz, f1x, f1y, f1z);
}
-
- color spheryvalue (float px, float py, float pz , float f1xcenter, float f1ycenter, float f1zcenter) {
-
- return color(px, dist(px, py, pz, f1xcenter, f1ycenter, f1zcenter) , max(0, 100 - 10*abs(dist(px, py, pz, f1xcenter, f1ycenter, f1zcenter)- vibration.getValuef() ) ) );
-
+ //void updatespherey(deltaMs, )
+ color spheryvalue (float px, float py, float pz , float f1xc, float f1yc, float f1zc)
+ {
+//switch(sShpape.cur() ) {}
+ return lx.hsb(constrain(huespread.getValuef()*5*px, 0, 360) , dist(px, py, pz, f1xc, f1yc, f1zc) ,
+ max(0, 100 - 100*widthparameter.getValuef()*abs(dist(px, py, pz, f1xcenter, ybounce.getValuef(), f1zcenter)
+ - vibration.getValuef() ) ) );
}
-
- void run(int deltaMS) {
- final float vv = vibration.getValuef();
- final float vvx = vx.getValuef();
+ color ellipsevalue(float px, float py, float pz , float f1xc, float f1yc, float f1zc, float f2xc, float f2yc, float f2zc)
+ {
+//switch(sShpape.cur() ) {}
+ return lx.hsb(huespread.getValuef()*5*px, dist(model.xMax-px, model.yMax-py, model.zMax-pz, f1xc, f1yc, f1zc) ,
+ max(0, 100 - 100*widthparameter.getValuef() *
+ abs( (dist(px, py, pz, f1xc, ybounce.getValuef(), f1zc) +
+ (dist(px, py , pz, f2xc, ybounce.getValuef(), f2zc) ) )/2
+ - 1.2*vibration.getValuef() ) ) ) ;
}
+
+void run(double deltaMs) {
+ float vv = vibration.getValuef();
+ float ybv = ybounce.getValuef();
+
+ }
- }
-final int NUM_SPHERES = 5;
+}
+
+
final Sphery[] spherys;
- SineSphere(GLucose glucose) {
+ SineSphere(GLucose glucose)
+ {
super(glucose);
- addModulator(rs).trigger();
- //addModulator(band).trigger();
- addModulator(noisey).trigger();
- spherys = new Sphery[NUM_SPHERES];
- spherys[1] = new Sphery(model.xMax/4, model.yMax/2, model.zMax/2, modelrad/16, modelrad/8, 2500) ;
- spherys[2] = new Sphery(.75*model.xMax, model.yMax/2, model.zMax/2, modelrad/20, modelrad/10, 2000);
+ sinespin = new LXProjection(model);
+ addModulator(yrot).trigger();
+ //Sshape = addPick("Shape", , 1);
+ spherys = new Sphery[] {
+ new Sphery(model.xMax/4, model.yMax/2, model.zMax/2, modelrad/16, modelrad/8, 3000),
+ new Sphery(.75*model.xMax, model.yMax/2, model.zMax/2, modelrad/20, modelrad/10, 2000),
+ new Sphery(model.xMax/2, model.yMax/2, model.zMax/2, modelrad/4, modelrad/8, 2300),
+ };
+
}
- public void run(int deltaMs) {
- float rsv = rs.getValuef();
- float noiseyv = noisey.getValuef();
- float bandv = band.getValuef();
-
- spherys[1].run(deltaMs);
- spherys[2].run(deltaMs);
+// public void onParameterChanged(LXParameter parameter)
+// {
+
+
+// for (Sphery s : spherys) {
+// if (s == null) continue;
+// double bampv = s.bounceamp.getValue();
+// double brv = s.bouncerate.getValue();
+// double tempobounce = lx.tempo.bpm();
+// if (parameter == s.bounceamp)
+// {
+// s.ybounce.setRange(bampv*model.yMax/3 , bampv*2*model.yMax/3, brv);
+// }
+// else if ( parameter == s.bouncerate )
+// {
+// s.ybounce.setDuration(120000./tempobounce);
+// }
+// }
+// }
+
+ void run( double deltaMs) {
+ float t = lx.tempo.rampf();
+ float bpm = lx.tempo.bpmf();
+ //spherys[1].run(deltaMs);
+ //spherys[2].run(deltaMs);
+ //spherys[3].run(deltaMs);]
+ sinespin.reset()
+
+ // Translate so the center of the car is the origin, offset by yPos
+ .center()
+
+ // Rotate around the origin (now the center of the car) about an X-vector
+ .rotate(yrot.getValuef(), 0, 1, 0);
+
+
+
+ for (LXPoint p : model.points){
+ color c = 0;
+ c = blendColor(c, spherys[1].spheryvalue(p.x, p.y, p.z, .75*model.xMax, model.yMax/2, model.zMax/2), ADD);
+ c = blendColor(c, spherys[0].spheryvalue(p.x, p.y, p.z, model.xMax/4, model.yMax/4, model.zMax/2), ADD);
+ c = blendColor(c, spherys[2].spheryvalue(p.x, p.y, p.z, model.xMax/2, model.yMax/2, model.zMax/2),ADD);
- for (Point p: model.points) {
-
- color c = 0;
-
- c = blendColor(c, spherys[2].spheryvalue(p.fx, p.fy, p.fz, .75*model.xMax, model.yMax/2, model.zMax/2), ADD);
- c = blendColor(c, spherys[1].spheryvalue(p.fx, p.fy, p.fz, model.xMax/4, model.yMax/4, model.zMax/2), ADD);
- float distfromcenter = dist(p.fx, p.fy, p.fz, model.xMax/2, model.yMax/2, model.zMax/2);
- int distint = floor(distfromcenter);
-
- c = blendColor(c, color(
-
- constrain( p.fx , 0, 360),
- constrain( distfromcenter, 20, 80),
- max(0, 100 - 10*abs(distfromcenter - noiseyv ) )
- ),
- ADD);
+ colors[p.index] = lx.hsb(lx.h(c), lx.s(c), lx.b(c));
+
+ }
-
- colors[p.index]=c;
+
+
+ }
+ int spheremode = 0;
+
+ // void keyPressed() {
+ // spheremode++;
+ // }
+
+ // color CalcPoint(PVector Px)
+ // {
+ // // if (spheremode == 0 )
+ //{
+
+ //}
+ // else if (spheremode == 1)
+ // {
+
+ // color c = 0;
+ // c = blendColor(c, spherys[3].ellipsevalue(Px.x, Px.y, Px.z, model.xMax/4, model.yMax/4, model.zMax/4, 3*model.xMax/4, 3*model.yMax/4, 3*model.zMax/4),ADD);
+ // return c;
+ // }
+ // return lx.hsb(0,0,0);
+ // // else if(spheremode ==2)
+ // { color c = 0;
+ // return lx.hsb(CalcCone( (xyz by = new xyz(0,spherys[2].ybounce.getValuef(),0) ), Px, mid) );
+
+ // }
+
+
+ // }
+
+ }
+
+class CubeCurl extends SCPattern{
+float CH, CW, diag;
+ArrayList<PVector> cubeorigin = new ArrayList<PVector>();
+ArrayList<PVector> centerlist = new ArrayList<PVector>();
+private SinLFO curl = new SinLFO(0, Cube.EDGE_HEIGHT, 5000 );
+
+private SinLFO bg = new SinLFO(180, 220, 3000);
+
+CubeCurl(GLucose glucose){
+super(glucose);
+addModulator(curl).trigger();
+addModulator(bg).trigger();
+ this.CH = Cube.EDGE_HEIGHT;
+ this.CW = Cube.EDGE_WIDTH;
+ this.diag = sqrt(CW*CW + CW*CW);
+
+
+ArrayList<PVector> centerlistrelative = new ArrayList<PVector>();
+for (int i = 0; i < model.cubes.size(); i++){
+ Cube a = model.cubes.get(i);
+ cubeorigin.add(new PVector(a.x, a.y, a.z));
+ centerlist.add(centerofcube(i));
+
+}
+
+}
+//there is definitely a better way of doing this!
+PVector centerofcube(int i) {
+Cube c = model.cubes.get(i);
+
+println(" cube #: " + i + " c.x " + c.x + " c.y " + c.y + " c.z " + c.z );
+PVector cubeangle = new PVector(c.rx, c.ry, c.rz);
+//println("raw x" + cubeangle.x + "raw y" + cubeangle.y + "raw z" + cubeangle.z);
+PVector cubecenter = new PVector(c.x + CW/2, c.y + CH/2, c.z + CW/2);
+println("cubecenter unrotated: " + cubecenter.x + " " +cubecenter.y + " " +cubecenter.z );
+PVector centerrot = new PVector(cos(c.rx)*CW/2 - sin(c.rx)*CW/2, 0, cos(c.rz)*CW/2 + sin(c.rz)*CW/2);
+ // nCos*(y-o.y) - nSin*(z-o.z) + o.y
+cubecenter = PVector.add(cubecenter, centerrot);
+println( " cubecenter.x " + cubecenter.x + " cubecenter.y " + cubecenter.y + " cubecenter.z " + cubecenter.z + " ");
+
+
+return cubecenter;
+}
+
+
+void run(double deltaMs){
+for (int i =0; i < model.cubes.size(); i++) {
+Cube c = model.cubes.get(i);
+float cfloor = c.y;
+
+// if (i%3 == 0){
+
+// for (LXPoint p : c.points ){
+// // colors[p.index]=color(0,0,0);
+// //float dif = (p.y - c.y);
+// //colors[p.index] = color( bg.getValuef() , 80 , dif < curl.getValuef() ? 80 : 0, ADD);
+// }
+// }
+
+// else if (i%3 == 1) {
+
+// for (LXPoint p: c.points){
+// colors[p.index]=color(0,0,0);
+// float dif = (p.y - c.y);
+// // colors[p.index] =
+// // color(bg.getValuef(),
+// // map(curl.getValuef(), 0, Cube.EDGE_HEIGHT, 20, 100),
+// // 100 - 10*abs(dif - curl.getValuef()), ADD );
+// }
+// }
+// else if (i%3 == 2){
+ // centerlist[i].sub(cubeorigin(i);
+ for (LXPoint p: c.points) {
+ PVector pv = new PVector(p.x, p.y, p.z);
+ colors[p.index] =color( constrain(4* pv.dist(centerlist.get(i)), 0, 360) , 50, 100 );
+ // colors[p.index] =color(constrain(centerlist[i].x, 0, 360), constrain(centerlist[i].y, 0, 100), );
+
+
}
+
+
+ //}
+
+ }
}
+ }
+
+ class HueTestHSB extends SCPattern{
+ BasicParameter HueT = new BasicParameter("Hue", .5);
+ BasicParameter SatT = new BasicParameter("Sat", .5);
+ BasicParameter BriT = new BasicParameter("Bright", .5);
+
+HueTestHSB(GLucose glucose) {
+ super(glucose);
+ addParameter(HueT);
+ addParameter(SatT);
+ addParameter(BriT);
}
+ void run(double deltaMs){
+ for (LXPoint p : model.points) {
+ color c = 0;
+ c = blendColor(c, lx.hsb(360*HueT.getValuef(), 100*SatT.getValuef(), 100*BriT.getValuef()), ADD);
+ colors[p.index]= c;
+ }
+ int now= millis();
+ if (now % 1000 <= 20)
+ {
+ println("Hue: " + 360*HueT.getValuef() + "Sat: " + 100*SatT.getValuef() + "Bright: " + 100*BriT.getValuef());
+ }
+ }
+
+ }
repositories / SugarCubes.git / blobdiff