class L8onLife extends SCPattern {
// Controls the rate of life algorithm ticks, in milliseconds
private BasicParameter rateParameter = new BasicParameter("DELAY", 112.5, 0.0, 1000.0);
- // Controls if the cubes should be randomized even if something changes. Set above 0.5 to randomize cube aliveness.
- private BasicParameter randomParameter = new BasicParameter("RAND", 0.0);
+ // Controls the probability of a mutation in the cycleOfLife
+ private BasicParameter randomParameter = new BasicParameter("RAND", 0.000000011, 0.0, 0.1);
// Controls the brightness of dead cubes.
private BasicParameter deadParameter = new BasicParameter("DEAD", 25.0, 0.0, 100.0);
// Controls the saturation.
public final double MIN_ALIVE_PROBABILITY = 0.2;
public final double MAX_ALIVE_PROBABILITY = 0.9;
- private final SinLFO xPos = new SinLFO(0, model.xMax, 4500);
- private final SinLFO zPos = new SinLFO(0, model.zMax, 2500);
+ private final SawLFO cubePos = new SawLFO(0, model.cubes.size(), 2500);
class CubeState {
// Index of cube in glucose.model.cubes
addParameter(randomParameter);
addParameter(deadParameter);
addParameter(saturationParameter);
- addModulator(xPos).trigger();
- addModulator(zPos).trigger();
+ addModulator(cubePos).trigger();
}
public void run(double deltaMs) {
cube_state = this.cube_states.get(i);
if(shouldLightCube(cube_state)) {
- lightLiveCube(cube);
+ lightLiveCube(cube, i);
} else {
- lightDeadCube(cube);
+ lightDeadCube(cube, i);
}
i++;
}
- boolean should_randomize_anyway = (randomParameter.getValuef() > 0.5);
- if(should_randomize_anyway || !any_changes_this_run) {
+ if(!any_changes_this_run) {
randomizeCubeStates();
} else {
applyNewLives();
}
}
- public void lightLiveCube(Cube cube) {
+ public void lightLiveCube(Cube cube, Integer index) {
+ float cube_dist = LXUtils.wrapdistf((float) index, cubePos.getValuef(), model.cubes.size());
+ float hv = (cube_dist / model.cubes.size()) * 360;
+
for (LXPoint p : cube.points) {
- float hv = max(0, lx.getBaseHuef() - abs(p.z - zPos.getValuef()));
colors[p.index] = lx.hsb(
hv,
saturationParameter.getValuef(),
}
}
- public void lightDeadCube(Cube cube) {
+ public void lightDeadCube(Cube cube, Integer index) {
+ float cube_dist = LXUtils.wrapdistf((float) index, cubePos.getValuef(), model.cubes.size());
+ float dist_proportion = (cube_dist / (float) model.cubes.size());
+ float hv = dist_proportion * 360;
+ float dead_bright = deadParameter.getValuef() * dist_proportion;
+
for (LXPoint p : cube.points) {
- float hv = max(0, lx.getBaseHuef() - abs(p.x - xPos.getValuef()));
- double dead_bright = deadParameter.getValuef() * Math.random();
-
colors[p.index] = lx.hsb(
hv,
saturationParameter.getValuef(),
Integer alive_neighbor_count = countLiveNeighbors(cube_state);
boolean before_alive = cube_state.alive;
boolean after_alive = before_alive;
+ double mutation = Math.random();
if(cube_state.alive) {
if(alive_neighbor_count < 2 || alive_neighbor_count > 3) {
}
}
+ if(mutation <= randomParameter.getValuef()) {
+ after_alive = !after_alive;
+ }
+
if(before_alive != after_alive) {
any_changes_this_run = true;
}
}
class L8onAutomata extends SCPattern {
- // Controls if the points should be randomized even if something changes. Set above 0.5 to randomize cube aliveness.
- private BasicParameter randomParameter = new BasicParameter("RAND", 0.0);
+ // Controls the probability of a mutation in the cycleOfStripperLife
+ private BasicParameter randomParameter = new BasicParameter("RAND", 0.000000011, 0.0, 0.1);
// Controls the rate of life algorithm ticks, in milliseconds
private BasicParameter rateParameter = new BasicParameter("DELAY", 75.0, 0.0, 1000.0);
- private final SinLFO zPos = new SinLFO(0, model.zMax, 2500);
+ private final SawLFO pointPos = new SawLFO(0, model.points.size(), 3000);
public final double MIN_ALIVE_PROBABILITY = 0.2;
public final double MAX_ALIVE_PROBABILITY = 0.9;
addParameter(randomParameter);
addParameter(rateParameter);
- addModulator(zPos).trigger();
+ addModulator(pointPos).trigger();
}
private void initPointStates() {
point_state = this.point_states.get(i);
if(shouldLightPoint(point_state)) {
- lightLivePoint(p);
+ lightLivePoint(p, i);
} else {
- lightDeadPoint(p);
+ lightDeadPoint(p, i);
}
i++;
}
- boolean should_randomize_anyway = (randomParameter.getValuef() > 0.5);
- if(should_randomize_anyway || !any_changes_this_run) {
+ if(!any_changes_this_run) {
randomizePointStates();
} else {
applyNewStates();
}
}
- public void lightLivePoint(LXPoint p) {
- float hv = max(0, lx.getBaseHuef() - abs(p.z - zPos.getValuef()));
+ public void lightLivePoint(LXPoint p, Integer index) {
+ float point_dist = LXUtils.wrapdistf((float) index, pointPos.getValuef(), model.points.size());
+ float hv = (point_dist / model.points.size()) * 360;
+
colors[p.index] = lx.hsb(
hv,
90,
);
}
- public void lightDeadPoint(LXPoint p) {
+ public void lightDeadPoint(LXPoint p, Integer index) {
colors[p.index] = lx.hsb(
- lx.getBaseHuef(),
+ 120,
0,
0
);
Integer alive_neighbor_count = countLiveNeighbors(point_state);
boolean before_alive = point_state.alive;
boolean after_alive = before_alive;
+ double mutation = Math.random();
if(point_state.alive) {
if(alive_neighbor_count == 1) {
}
}
+ if(mutation < randomParameter.getValuef()) {
+ after_alive = !after_alive;
+ }
+
if(before_alive != after_alive) {
any_changes_this_run = true;
}
double prob_range = (1.0 - MIN_ALIVE_PROBABILITY) - (1.0 - MAX_ALIVE_PROBABILITY);
double prob = MIN_ALIVE_PROBABILITY + (prob_range * Math.random());
- print("Randomizing points! p = " + prob + "\n");
+ //print("Randomizing points! p = " + prob + "\n");
for (PointState point_state: this.point_states) {
point_state.alive = (Math.random() <= prob);
class L8onStrips extends SCPattern {
// Controls the rate of life algorithm ticks, in milliseconds
- private BasicParameter rateParameter = new BasicParameter("DELAY", 112.5, 0.0, 1000.0);
- // Controls if the cubes should be randomized even if something changes. Set above 0.5 to randomize cube aliveness.
- private BasicParameter randomParameter = new BasicParameter("RAND", 0.0);
- // Controls the brightness of dead cubes.
- private BasicParameter deadParameter = new BasicParameter("DEAD", 25.0, 0.0, 100.0);
+ private BasicParameter rateParameter = new BasicParameter("DELAY", 112.5, 1.0, 1000.0);
+ // Controls the probability of a mutation in the cycleOfStripperLife
+ private BasicParameter randomParameter = new BasicParameter("RAND", 0.000000011, 0.0, 0.1);
// Controls the saturation.
private BasicParameter saturationParameter = new BasicParameter("SAT", 90.0, 0.0, 100.0);
public final double MIN_ALIVE_PROBABILITY = 0.4;
public final double MAX_ALIVE_PROBABILITY = 0.9;
- private final SinLFO xPos = new SinLFO(0, model.xMax, 4500);
- private final SinLFO zPos = new SinLFO(0, model.zMax, 2500);
+ public final float MAX_ALIVE_BRIGHTNESS = 95.0;
+
+ private final SawLFO stripPos = new SawLFO(0, model.strips.size(), 3000);
class StripState {
// Index of strip in glucose.model.strips
public Integer index;
// Boolean which describes if strip is alive.
public boolean alive;
+ // Boolean which describes if strip was just changed;
+ public boolean just_changed;
+ // Current brightness
+ public float current_brightness;
// List of this cubes neighbors
public List<Integer> neighbors;
- public StripState(Integer index, boolean alive, List<Integer> neighbors) {
+ public StripState(Integer index, boolean alive, float current_brightness, List<Integer> neighbors) {
this.index = index;
this.alive = alive;
this.neighbors = neighbors;
addParameter(rateParameter);
addParameter(randomParameter);
- addParameter(deadParameter);
addParameter(saturationParameter);
- addModulator(xPos).trigger();
- addModulator(zPos).trigger();
+ addModulator(stripPos).trigger();
}
public void run(double deltaMs) {
strip_state = this.strip_states.get(i);
if(shouldLightStrip(strip_state)) {
- lightLiveStrip(strip);
+ lightLiveStrip(strip, strip_state, deltaMs);
} else {
- lightDeadStrip(strip);
+ lightDeadStrip(strip, strip_state, deltaMs);
}
-
i++;
}
- boolean should_randomize_anyway = (randomParameter.getValuef() > 0.5);
- if(should_randomize_anyway || !any_changes_this_run) {
+ if(!any_changes_this_run) {
randomizeStripStates();
} else {
applyNewLives();
}
}
- public void lightLiveStrip(Strip strip) {
+ public void lightLiveStrip(Strip strip, StripState strip_state, double deltaMs) {
+ Integer index = strip_state.index;
+ float strip_dist = LXUtils.wrapdistf((float) index, stripPos.getValuef(), model.strips.size());
+ float hv = (strip_dist / model.strips.size()) * 360;
+ float bv = strip_state.current_brightness;
+
+ if(!strip_state.just_changed || deltaMs >= rateParameter.getValuef()) {
+ float bright_prop = min(((float) time_since_last_run / rateParameter.getValuef()), 1.0);
+ bv = min(MAX_ALIVE_BRIGHTNESS, bright_prop * MAX_ALIVE_BRIGHTNESS);
+
+ if(index == 100) {
+ print("live prop: " + bright_prop + " bv: " + bv + " current: " + strip_state.current_brightness + "\n");
+ }
+
+ if(strip_state.current_brightness < bv) {
+ strip_state.current_brightness = bv;
+ } else {
+ bv = strip_state.current_brightness;
+ }
+
+ if(index == 100) {
+ print("live bv: " + bv + " current: " + strip_state.current_brightness + "\n");
+ }
+ }
+
for (LXPoint p : strip.points) {
- float hv = max(0, lx.getBaseHuef() - abs(p.z - zPos.getValuef()));
colors[p.index] = lx.hsb(
hv,
saturationParameter.getValuef(),
- 75
+ bv
);
}
}
- public void lightDeadStrip(Strip strip) {
- for (LXPoint p : strip.points) {
- float hv = max(0, lx.getBaseHuef() - abs(p.x - xPos.getValuef()));
- double dead_bright = deadParameter.getValuef() * Math.random();
+ public void lightDeadStrip(Strip strip, StripState strip_state, double deltaMs) {
+ Integer index = strip_state.index;
+ float strip_dist = LXUtils.wrapdistf((float) index, stripPos.getValuef(), model.strips.size());
+ float dist_proportion = (strip_dist / (float) model.strips.size());
+ float hv = dist_proportion * 360;
+ float bv = strip_state.current_brightness;
+
+ if(!strip_state.just_changed || deltaMs >= rateParameter.getValuef()) {
+ float bright_prop = 1.0 - min(((float) time_since_last_run / rateParameter.getValuef()), 1.0);
+ bv = max(0.0, bright_prop * MAX_ALIVE_BRIGHTNESS);
+ if(index == 100) {
+ print("dead prop: " + bright_prop + " bv: " + bv + " current: " + strip_state.current_brightness + "\n");
+ }
+
+ if(strip_state.current_brightness > bv) {
+ strip_state.current_brightness = bv;
+ } else {
+ bv = strip_state.current_brightness;
+ }
+
+ if(index == 100) {
+ print("dead bv: " + bv + " current: " + strip_state.current_brightness + "\n");
+ }
+ }
+
+ for (LXPoint p : strip.points) {
colors[p.index] = lx.hsb(
hv,
saturationParameter.getValuef(),
- dead_bright
+ bv
);
}
}
private void initStripStates() {
List<Integer> neighbors;
boolean alive = false;
+ float current_brightness;
StripState strip_state;
this.strip_states = new ArrayList<StripState>();
Integer i = 0;
for (Strip strip : model.strips) {
neighbors = findStripNeighbors(strip, i);
alive = true;
- strip_state = new StripState(i, alive, neighbors);
+ current_brightness = 0.0;
+ strip_state = new StripState(i, alive, current_brightness, neighbors);
this.strip_states.add(strip_state);
total_neighbors += neighbors.size();
for (StripState strip_state : this.strip_states) {
strip_state.alive = (Math.random() <= prob);
+ if(strip_state.alive) {
+ strip_state.current_brightness = 0;
+ } else{
+ strip_state.current_brightness = MAX_ALIVE_BRIGHTNESS;
+ }
}
}
// Respect rate parameter.
if(time_since_last_run < rateParameter.getValuef()) {
any_changes_this_run = true;
+ strip_state.just_changed = false;
return strip_state.alive;
} else {
boolean new_life = cycleOfStripperLife(strip_state);
Integer alive_neighbor_count = countLiveNeighbors(strip_state);
boolean before_alive = strip_state.alive;
boolean after_alive = before_alive;
+ double mutation = Math.random();
if(strip_state.alive) {
if(alive_neighbor_count < 2 || alive_neighbor_count > 6) {
}
}
+ if(mutation < randomParameter.getValuef()) {
+ after_alive = !after_alive;
+ }
+
if(before_alive != after_alive) {
any_changes_this_run = true;
+ strip_state.just_changed = true;
}
return after_alive;
repositories / SugarCubes.git / blobdiff