[deb_xorg-server.git] / hw / xfree86 / xorgconf.cpp

#
# Copyright (c) 1994-1998 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $

# **********************************************************************
# This is a sample configuration file only, intended to illustrate
# what a config file might look like.  Refer to the xorg.conf(__filemansuffix__)
# man page for details about the format of this file.
# **********************************************************************

# The ordering of sections is not important in XFree86 4.0 and later,
# nor in any Xorg release.

# **********************************************************************
# Files section.  This allows default font and module paths to be set
# **********************************************************************

Section "Files"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods).
# The default path is shown here.

#    FontPath	DEFAULTFONTPATH

# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.

#    ModulePath	MODULEPATH

EndSection

# **********************************************************************
# Module section -- this is an optional section which is used to specify
# which run-time loadable modules to load when the X server starts up.
# **********************************************************************

Section "Module"

# This loads the DBE extension module.

    Load	"dbe"

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	Option	"omit xfree86-dga"
    EndSubSection

EndSection


# **********************************************************************
# Server flags section.  This contains various server-wide Options.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option	"NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option	"DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option	"DontZap"	"false"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option	"DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option	"DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option	"AllowNonLocalXvidtune"

# Set the basic blanking screen saver timeout.

    Option	"BlankTime"	"10"	# 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

    Option	"StandbyTime"	"10"	# 10 minutes
    Option	"SuspendTime"	"10"	# 10 minutes
    Option	"OffTime"	"10"	# 10 minutes

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

    Option	"AutoRepeat"	"500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option	"Xleds"	"1 2 3"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option	"XkbModel"	"pc102"
#    Option	"XkbModel"	"pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option	"XkbModel"	"microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option	"XkbModel"	"pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option	"XkbLayout"	"de"
#
# or:
#
#    Option	"XkbLayout"	"de"
#    Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option	"XkbOptions"	"ctrl:swapcaps"


# These are the default XKB settings for xorg
#
#    Option	"XkbRules"	"xorg"
#    Option	"XkbModel"	"pc105"
#    Option	"XkbLayout"	"us"
#    Option	"XkbVariant"	""
#    Option	"XkbOptions"	""

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver	"mouse"

# The mouse protocol and device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

    Option	"Protocol"	"Microsoft"
    Option	"Device"	"/dev/mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:

#    Option	"Protocol"	"Auto"

# When using mouse connected to a PS/2 port (aka "MousePort"), set the
# the protocol as follows.  On some platforms some other settings may
# be available.

#    Option "Protocol"	"PS/2"

# Baudrate and SampleRate are only for some older Logitech mice.  In
# almost every case these lines should be omitted.

#    Option	"BaudRate"	"9600"
#    Option	"SampleRate"	"150"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option	"Emulate3Buttons"
#    Option	"Emulate3Timeout"	"50"

# ChordMiddle is an option for some 3-button Logitech mice, or any
# 3-button mouse where the middle button generates left+right button
# events.

#    Option	"ChordMiddle"

EndSection

Section "InputDevice"
    Identifier	"Mouse2"
    Driver	"mouse"
    Option	"Protocol"	"MouseMan"
    Option	"Device"	"/dev/mouse2"
EndSection

# Some examples of extended input devices

# Section "InputDevice"
#    Identifier	"spaceball"
#    Driver	"magellan"
#    Option	"Device"	"/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier	"spaceball2"
#    Driver	"spaceorb"
#    Option	"Device"	"/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier	"touchscreen0"
#    Driver	"microtouch"
#    Option	"Device"	"/dev/ttyS0"
#    Option	"MinX"		"1412"
#    Option	"MaxX"		"15184"
#    Option	"MinY"		"15372"
#    Option	"MaxY"		"1230"
#    Option	"ScreenNumber"	"0"
#    Option	"ReportingMode"	"Scaled"
#    Option	"ButtonNumber"	"1"
#    Option	"SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier	"touchscreen1"
#    Driver	"elo2300"
#    Option	"Device"	"/dev/ttyS0"
#    Option	"MinX"		"231"
#    Option	"MaxX"		"3868"
#    Option	"MinY"		"3858"
#    Option	"MaxY"		"272"
#    Option	"ScreenNumber"	"0"
#    Option	"ReportingMode"	"Scaled"
#    Option	"ButtonThreshold"	"17"
#    Option	"ButtonNumber"	"1"
#    Option	"SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

# The identifier line must be present.

    Identifier	"Generic Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

#    HorizSync	31.5  # typical for a single frequency fixed-sync monitor
#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

#    VertRefresh	60  # typical for a single frequency fixed-sync monitor

#    VertRefresh	50-100        # multisync
#    VertRefresh	60, 65        # multiple fixed sync frequencies
#    VertRefresh	40-50, 80-100 # multiple ranges of sync frequencies

# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.

# A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
# These two are equivalent

#    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525

    Mode "640x480"
        DotClock	25.175
        HTimings	640 664 760 800
        VTimings	480 491 493 525
    EndMode

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

#    Mode "1024x768i"
#        DotClock	45
#        HTimings	1024 1048 1208 1264
#        VTimings	768 776 784 817
#        Flags		"Interlace"
#    EndMode

# If a monitor has DPMS support, that can be indicated here.  This will
# enable DPMS when the monitor is used with drivers that support it.

#    Option	"dpms"

# If a monitor requires that the sync signals be superimposed on the
# green signal, the following option will enable this when used with
# drivers that support it.  Only a relatively small range of hardware
# (and drivers) actually support this.

#    Option	"sync on green"

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"

# The Identifier must be present.

    Identifier	"Generic VESA"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver	"vesa"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset	"generic"

# Various other lines can be specified to override the driver's automatic
# detection code.  In most cases they are not needed.

#    VideoRam	256
#    Clocks	25.2 28.3

# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID	"PCI:0:10:0"

# Various option lines can be added here as required.  Some options
# are more appropriate in Screen sections, Display subsections or even
# Monitor sections.

#    Option	"hw cursor" "off"

EndSection

Section "Device"
    Identifier	"any supported Trident chip"
    Driver	"trident"
EndSection

Section "Device"
    Identifier	"MGA Millennium I"
    Driver	"mga"
    Option	"hw cursor" "off"
    BusID	"PCI:0:10:0"
EndSection

Section "Device"
    Identifier	"MGA G200 AGP"
    Driver	"mga"
    BusID	"PCI:1:0:0"
    Option	"pci retry"
EndSection


# **********************************************************************
# Screen sections.
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.

Section "Screen"

# The Identifier, Device and Monitor lines must be present

    Identifier	"Screen 1"
    Device	"Generic VESA"
    Monitor	"Generic Monitor"

# The favoured Depth and/or Bpp may be specified here

    DefaultDepth 8

    SubSection "Display"
        Depth		8
        Modes		"640x480"
        ViewPort	0 0
        Virtual 	800 600
    EndSubsection

    SubSection "Display"
	Depth		4
        Modes		"640x480"
    EndSubSection

    SubSection "Display"
	Depth		1
        Modes		"640x480"
    EndSubSection

EndSection


Section "Screen"
    Identifier		"Screen MGA1"
    Device		"MGA Millennium I"
    Monitor		"Generic Monitor"
    Option		"no accel"
    DefaultDepth	16
#    DefaultDepth	24

    SubSection "Display"
	Depth		8
	Modes		"1280x1024"
	Option		"rgb bits" "8"
	Visual		"StaticColor"
    EndSubSection
    SubSection "Display"
	Depth		16
	Modes		"1280x1024"
    EndSubSection
    SubSection "Display"
	Depth		24
	Modes		"1280x1024"
    EndSubSection
EndSection


Section "Screen"
    Identifier		"Screen MGA2"
    Device		"MGA G200 AGP"
    Monitor		"Generic Monitor"
    DefaultDepth	8

    SubSection "Display"
	Depth		8
	Modes		"1280x1024"
	Option		"rgb bits" "8"
	Visual		"StaticColor"
    EndSubSection
EndSection


# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present

    Identifier	"Main Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen	"Screen MGA 1"	""	""	""	"Screen MGA 2"
    Screen	"Screen MGA 2"	""	""	"Screen MGA 1"	""

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".  In this example, "Mouse1" is the core pointer,
# and "Mouse2" is an extended input device that also generates core
# pointer events (i.e., both mice will move the standard pointer).

    InputDevice	"Mouse1" "CorePointer"
    InputDevice	"Mouse2" "SendCoreEvents"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection


Section "ServerLayout"
    Identifier	"another layout"
    Screen	"Screen 1"
    Screen	"Screen MGA 1"
    InputDevice	"Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection


Section "ServerLayout"
    Identifier	"simple layout"
    Screen	"Screen 1"
    InputDevice	"Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Commit	Line	Data
a09e091a JB	1	#
	2	# Copyright (c) 1994-1998 by The XFree86 Project, Inc.
	3	#
	4	# Permission is hereby granted, free of charge, to any person obtaining a
	5	# copy of this software and associated documentation files (the "Software"),
	6	# to deal in the Software without restriction, including without limitation
	7	# the rights to use, copy, modify, merge, publish, distribute, sublicense,
	8	# and/or sell copies of the Software, and to permit persons to whom the
	9	# Software is furnished to do so, subject to the following conditions:
	10	#
	11	# The above copyright notice and this permission notice shall be included in
	12	# all copies or substantial portions of the Software.
	13	#
	14	# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	15	# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
	16	# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
	17	# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	18	# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
	19	# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
	20	# SOFTWARE.
	21	#
	22	# Except as contained in this notice, the name of the XFree86 Project shall
	23	# not be used in advertising or otherwise to promote the sale, use or other
	24	# dealings in this Software without prior written authorization from the
	25	# XFree86 Project.
	26	#
	27	# $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $
	28
	29	# **********************************************************************
	30	# This is a sample configuration file only, intended to illustrate
	31	# what a config file might look like. Refer to the xorg.conf(__filemansuffix__)
	32	# man page for details about the format of this file.
	33	# **********************************************************************
	34
	35	# The ordering of sections is not important in XFree86 4.0 and later,
	36	# nor in any Xorg release.
	37
	38	# **********************************************************************
	39	# Files section. This allows default font and module paths to be set
	40	# **********************************************************************
	41
	42	Section "Files"
	43
	44	# Multiple FontPath entries are allowed (which are concatenated together),
	45	# as well as specifying multiple comma-separated entries in one FontPath
	46	# command (or a combination of both methods).
	47	# The default path is shown here.
	48
	49	# FontPath DEFAULTFONTPATH
	50
	51	# ModulePath can be used to set a search path for the X server modules.
	52	# The default path is shown here.
	53
	54	# ModulePath MODULEPATH
	55
	56	EndSection
	57
	58	# **********************************************************************
	59	# Module section -- this is an optional section which is used to specify
	60	# which run-time loadable modules to load when the X server starts up.
	61	# **********************************************************************
	62
	63	Section "Module"
	64
65	# This loads the DBE extension module.
66
67	Load "dbe"
68
69	# This loads the miscellaneous extensions module, and disables
70	# initialisation of the XFree86-DGA extension within that module.
71
72	SubSection "extmod"
73	Option "omit xfree86-dga"
74	EndSubSection
75
76	EndSection
77
78
79	# **********************************************************************
80	# Server flags section. This contains various server-wide Options.
81	# **********************************************************************
82
83	Section "ServerFlags"
84
85	# Uncomment this to cause a core dump at the spot where a signal is
86	# received. This may leave the console in an unusable state, but may
87	# provide a better stack trace in the core dump to aid in debugging
88
89	# Option "NoTrapSignals"
90
91	# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
92	# (where n is 1 through 12). This allows clients to receive these key
93	# events.
94
95	# Option "DontVTSwitch"
96
97	# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
98	# This allows clients to receive this key event.
99
100	# Option "DontZap" "false"
101
102	# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
103	# sequences. This allows clients to receive these key events.
104
105	# Option "DontZoom"
106
107	# Uncomment this to disable tuning with the xvidtune client. With
108	# it the client can still run and fetch card and monitor attributes,
109	# but it will not be allowed to change them. If it tries it will
110	# receive a protocol error.
111
112	# Option "DisableVidModeExtension"
113
114	# Uncomment this to enable the use of a non-local xvidtune client.
115
116	# Option "AllowNonLocalXvidtune"
117
118	# Set the basic blanking screen saver timeout.
119
120	Option "BlankTime" "10" # 10 minutes
121
122	# Set the DPMS timeouts. These are set here because they are global
123	# rather than screen-specific. These settings alone don't enable DPMS.
124	# It is enabled per-screen (or per-monitor), and even then only when
125	# the driver supports it.
126
127	Option "StandbyTime" "10" # 10 minutes
128	Option "SuspendTime" "10" # 10 minutes
129	Option "OffTime" "10" # 10 minutes
130
131	EndSection
132
133	# **********************************************************************
134	# Input devices
135	# **********************************************************************
136
137	# **********************************************************************
138	# Core keyboard's InputDevice section
139	# **********************************************************************
140
141	Section "InputDevice"
142
143	Identifier "Keyboard1"
144	Driver "kbd"
145
146	# Set the keyboard auto repeat parameters. Not all platforms implement
147	# this.
148
149	Option "AutoRepeat" "500 5"
150
151	# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
152
153	# Option "Xleds" "1 2 3"
154
155	# To customise the XKB settings to suit your keyboard, modify the
156	# lines below (which are the defaults). For example, for a European
157	# keyboard, you will probably want to use one of:
158	#
159	# Option "XkbModel" "pc102"
160	# Option "XkbModel" "pc105"
161	#
162	# If you have a Microsoft Natural keyboard, you can use:
163	#
164	# Option "XkbModel" "microsoft"
165	#
166	# If you have a US "windows" keyboard you will want:
167	#
168	# Option "XkbModel" "pc104"
169	#
170	# Then to change the language, change the Layout setting.
171	# For example, a german layout can be obtained with:
172	#
173	# Option "XkbLayout" "de"
174	#
175	# or:
176	#
177	# Option "XkbLayout" "de"
178	# Option "XkbVariant" "nodeadkeys"
179	#
180	# If you'd like to switch the positions of your capslock and
181	# control keys, use:
182	#
183	# Option "XkbOptions" "ctrl:swapcaps"
184
185
186	# These are the default XKB settings for xorg
187	#
188	# Option "XkbRules" "xorg"
189	# Option "XkbModel" "pc105"
190	# Option "XkbLayout" "us"
191	# Option "XkbVariant" ""
192	# Option "XkbOptions" ""
193
194	EndSection
195
196
197	# **********************************************************************
198	# Core Pointer's InputDevice section
199	# **********************************************************************
200
201	Section "InputDevice"
202
203	# Identifier and driver
204
205	Identifier "Mouse1"
206	Driver "mouse"
207
208	# The mouse protocol and device. The device is normally set to /dev/mouse,
209	# which is usually a symbolic link to the real device.
210
211	Option "Protocol" "Microsoft"
212	Option "Device" "/dev/mouse"
213
214	# On platforms where PnP mouse detection is supported the following
215	# protocol setting can be used when using a newer PnP mouse:
216
217	# Option "Protocol" "Auto"
218
219	# When using mouse connected to a PS/2 port (aka "MousePort"), set the
220	# the protocol as follows. On some platforms some other settings may
221	# be available.
222
223	# Option "Protocol" "PS/2"
224
225	# Baudrate and SampleRate are only for some older Logitech mice. In
226	# almost every case these lines should be omitted.
227
228	# Option "BaudRate" "9600"
229	# Option "SampleRate" "150"
230
231	# Emulate3Buttons is an option for 2-button mice
232	# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
233
234	# Option "Emulate3Buttons"
235	# Option "Emulate3Timeout" "50"
236
237	# ChordMiddle is an option for some 3-button Logitech mice, or any
238	# 3-button mouse where the middle button generates left+right button
239	# events.
240
241	# Option "ChordMiddle"
242
243	EndSection
244
245	Section "InputDevice"
246	Identifier "Mouse2"
247	Driver "mouse"
248	Option "Protocol" "MouseMan"
249	Option "Device" "/dev/mouse2"
250	EndSection
251
252	# Some examples of extended input devices
253
254	# Section "InputDevice"
255	# Identifier "spaceball"
256	# Driver "magellan"
257	# Option "Device" "/dev/cua0"
258	# EndSection
259	#
260	# Section "InputDevice"
261	# Identifier "spaceball2"
262	# Driver "spaceorb"
263	# Option "Device" "/dev/cua0"
264	# EndSection
265	#
266	# Section "InputDevice"
267	# Identifier "touchscreen0"
268	# Driver "microtouch"
269	# Option "Device" "/dev/ttyS0"
270	# Option "MinX" "1412"
271	# Option "MaxX" "15184"
272	# Option "MinY" "15372"
273	# Option "MaxY" "1230"
274	# Option "ScreenNumber" "0"
275	# Option "ReportingMode" "Scaled"
276	# Option "ButtonNumber" "1"
277	# Option "SendCoreEvents"
278	# EndSection
279	#
280	# Section "InputDevice"
281	# Identifier "touchscreen1"
282	# Driver "elo2300"
283	# Option "Device" "/dev/ttyS0"
284	# Option "MinX" "231"
285	# Option "MaxX" "3868"
286	# Option "MinY" "3858"
287	# Option "MaxY" "272"
288	# Option "ScreenNumber" "0"
289	# Option "ReportingMode" "Scaled"
290	# Option "ButtonThreshold" "17"
291	# Option "ButtonNumber" "1"
292	# Option "SendCoreEvents"
293	# EndSection
294
295	# **********************************************************************
296	# Monitor section
297	# **********************************************************************
298
299	# Any number of monitor sections may be present
300
301	Section "Monitor"
302
303	# The identifier line must be present.
304
305	Identifier "Generic Monitor"
306
307	# HorizSync is in kHz unless units are specified.
308	# HorizSync may be a comma separated list of discrete values, or a
309	# comma separated list of ranges of values.
310	# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
311	# USER MANUAL FOR THE CORRECT NUMBERS.
312
313	# HorizSync 31.5 # typical for a single frequency fixed-sync monitor
314	# HorizSync 30-64 # multisync
315	# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
316	# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
317
318	# VertRefresh is in Hz unless units are specified.
319	# VertRefresh may be a comma separated list of discrete values, or a
320	# comma separated list of ranges of values.
321	# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
322	# USER MANUAL FOR THE CORRECT NUMBERS.
323
324	# VertRefresh 60 # typical for a single frequency fixed-sync monitor
325
326	# VertRefresh 50-100 # multisync
327	# VertRefresh 60, 65 # multiple fixed sync frequencies
328	# VertRefresh 40-50, 80-100 # multiple ranges of sync frequencies
329
330	# Modes can be specified in two formats. A compact one-line format, or
331	# a multi-line format.
332
333	# A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
334	# These two are equivalent
335
336	# ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
337
338	Mode "640x480"
339	DotClock 25.175
340	HTimings 640 664 760 800
341	VTimings 480 491 493 525
342	EndMode
343
344	# These two are equivalent
345
346	# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
347
348	# Mode "1024x768i"
349	# DotClock 45
350	# HTimings 1024 1048 1208 1264
351	# VTimings 768 776 784 817
352	# Flags "Interlace"
353	# EndMode
354
355	# If a monitor has DPMS support, that can be indicated here. This will
356	# enable DPMS when the monitor is used with drivers that support it.
357
358	# Option "dpms"
359
360	# If a monitor requires that the sync signals be superimposed on the
361	# green signal, the following option will enable this when used with
362	# drivers that support it. Only a relatively small range of hardware
363	# (and drivers) actually support this.
364
365	# Option "sync on green"
366
367	EndSection
368
369	# **********************************************************************
370	# Graphics device section
371	# **********************************************************************
372
373	# Any number of graphics device sections may be present
374
375	Section "Device"
376
377	# The Identifier must be present.
378
379	Identifier "Generic VESA"
380
381	# The Driver line must be present. When using run-time loadable driver
382	# modules, this line instructs the server to load the specified driver
383	# module. Even when not using loadable driver modules, this line
384	# indicates which driver should interpret the information in this section.
385
386	Driver "vesa"
387
388	# The chipset line is optional in most cases. It can be used to override
389	# the driver's chipset detection, and should not normally be specified.
390
391	# Chipset "generic"
392
393	# Various other lines can be specified to override the driver's automatic
394	# detection code. In most cases they are not needed.
395
396	# VideoRam 256
397	# Clocks 25.2 28.3
398
399	# The BusID line is used to specify which of possibly multiple devices
400	# this section is intended for. When this line isn't present, a device
401	# section can only match up with the primary video device. For PCI
402	# devices a line like the following could be used. This line should not
403	# normally be included unless there is more than one video device
404	# intalled.
405
406	# BusID "PCI:0:10:0"
407
408	# Various option lines can be added here as required. Some options
409	# are more appropriate in Screen sections, Display subsections or even
410	# Monitor sections.
411
412	# Option "hw cursor" "off"
413
414	EndSection
415
416	Section "Device"
417	Identifier "any supported Trident chip"
418	Driver "trident"
419	EndSection
420
421	Section "Device"
422	Identifier "MGA Millennium I"
423	Driver "mga"
424	Option "hw cursor" "off"
425	BusID "PCI:0:10:0"
426	EndSection
427
428	Section "Device"
429	Identifier "MGA G200 AGP"
430	Driver "mga"
431	BusID "PCI:1:0:0"
432	Option "pci retry"
433	EndSection
434
435
436	# **********************************************************************
437	# Screen sections.
438	# **********************************************************************
439
440	# Any number of screen sections may be present. Each describes
441	# the configuration of a single screen. A single specific screen section
442	# may be specified from the X server command line with the "-screen"
443	# option.
444
445	Section "Screen"
446
447	# The Identifier, Device and Monitor lines must be present
448
449	Identifier "Screen 1"
450	Device "Generic VESA"
451	Monitor "Generic Monitor"
452
453	# The favoured Depth and/or Bpp may be specified here
454
455	DefaultDepth 8
456
457	SubSection "Display"
458	Depth 8
459	Modes "640x480"
460	ViewPort 0 0
461	Virtual 800 600
462	EndSubsection
463
464	SubSection "Display"
465	Depth 4
466	Modes "640x480"
467	EndSubSection
468
469	SubSection "Display"
470	Depth 1
471	Modes "640x480"
472	EndSubSection
473
474	EndSection
475
476
477	Section "Screen"
478	Identifier "Screen MGA1"
479	Device "MGA Millennium I"
480	Monitor "Generic Monitor"
481	Option "no accel"
482	DefaultDepth 16
483	# DefaultDepth 24
484
485	SubSection "Display"
486	Depth 8
487	Modes "1280x1024"
488	Option "rgb bits" "8"
489	Visual "StaticColor"
490	EndSubSection
491	SubSection "Display"
492	Depth 16
493	Modes "1280x1024"
494	EndSubSection
495	SubSection "Display"
496	Depth 24
497	Modes "1280x1024"
498	EndSubSection
499	EndSection
500
501
502	Section "Screen"
503	Identifier "Screen MGA2"
504	Device "MGA G200 AGP"
505	Monitor "Generic Monitor"
506	DefaultDepth 8
507
508	SubSection "Display"
509	Depth 8
510	Modes "1280x1024"
511	Option "rgb bits" "8"
512	Visual "StaticColor"
513	EndSubSection
514	EndSection
515
516
517	# **********************************************************************
518	# ServerLayout sections.
519	# **********************************************************************
520
521	# Any number of ServerLayout sections may be present. Each describes
522	# the way multiple screens are organised. A specific ServerLayout
523	# section may be specified from the X server command line with the
524	# "-layout" option. In the absence of this, the first section is used.
525	# When now ServerLayout section is present, the first Screen section
526	# is used alone.
527
528	Section "ServerLayout"
529
530	# The Identifier line must be present
531
532	Identifier "Main Layout"
533
534	# Each Screen line specifies a Screen section name, and optionally
535	# the relative position of other screens. The four names after
536	# primary screen name are the screens to the top, bottom, left and right
537	# of the primary screen. In this example, screen 2 is located to the
538	# right of screen 1.
539
540	Screen "Screen MGA 1" "" "" "" "Screen MGA 2"
541	Screen "Screen MGA 2" "" "" "Screen MGA 1" ""
542
543	# Each InputDevice line specifies an InputDevice section name and
544	# optionally some options to specify the way the device is to be
545	# used. Those options include "CorePointer", "CoreKeyboard" and
546	# "SendCoreEvents". In this example, "Mouse1" is the core pointer,
547	# and "Mouse2" is an extended input device that also generates core
548	# pointer events (i.e., both mice will move the standard pointer).
549
550	InputDevice "Mouse1" "CorePointer"
551	InputDevice "Mouse2" "SendCoreEvents"
552	InputDevice "Keyboard1" "CoreKeyboard"
553
554	EndSection
555
556
557	Section "ServerLayout"
558	Identifier "another layout"
559	Screen "Screen 1"
560	Screen "Screen MGA 1"
561	InputDevice "Mouse1" "CorePointer"
562	InputDevice "Keyboard1" "CoreKeyboard"
563	EndSection
564
565
566	Section "ServerLayout"
567	Identifier "simple layout"
568	Screen "Screen 1"
569	InputDevice "Mouse1" "CorePointer"
570	InputDevice "Keyboard1" "CoreKeyboard"
571	EndSection
572